summaryrefslogtreecommitdiff
path: root/board/nvidia
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2011-09-21 12:40:04 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-10-27 21:56:29 +0200
commit4ed59e70e4e0309794d532120d8c357b308b0e23 (patch)
tree499b1387f5048eff51861f2069be0abc075a04e9 /board/nvidia
parent3e00dbdf24250548bdf702a79713befae5640723 (diff)
downloadu-boot-imx-4ed59e70e4e0309794d532120d8c357b308b0e23.zip
u-boot-imx-4ed59e70e4e0309794d532120d8c357b308b0e23.tar.gz
u-boot-imx-4ed59e70e4e0309794d532120d8c357b308b0e23.tar.bz2
tegra2: Add more clock functions
This adds most of the clock functions required by board and driver code: -query and adjust peripheral clocks -query and adjust PLLs -reset and enable control These functions are plumbed in as required. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia')
-rw-r--r--board/nvidia/common/board.c105
1 files changed, 24 insertions, 81 deletions
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 5e28b4c..9672c5e 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -52,62 +52,31 @@ int timer_init(void)
return 0;
}
-/*
- * Routine: clock_init_uart
- * Description: init the PLL and clock for the UART(s)
- */
-static void clock_init_uart(void)
+static void enable_uart(enum periph_id pid)
{
- struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH];
- u32 reg;
-
- reg = readl(&pll->pll_base);
- if (!(reg & PLL_BASE_OVRRIDE_MASK)) {
- /* Override pllp setup for 216MHz operation. */
- reg = PLL_BYPASS_MASK | PLL_BASE_OVRRIDE_MASK |
- (1 << PLL_DIVP_SHIFT) | (0xc << PLL_DIVM_SHIFT);
- reg |= (NVRM_PLLP_FIXED_FREQ_KHZ / 500) << PLL_DIVN_SHIFT;
- writel(reg, &pll->pll_base);
-
- reg |= PLL_ENABLE_MASK;
- writel(reg, &pll->pll_base);
-
- reg &= ~PLL_BYPASS_MASK;
- writel(reg, &pll->pll_base);
- }
-
-#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
/* Assert UART reset and enable clock */
- reset_set_enable(PERIPH_ID_UART1, 1);
- clock_enable(PERIPH_ID_UART1);
-
- /* Enable pllp_out0 to UART */
- reg = readl(&clkrst->crc_clk_src_uarta);
- reg &= 0x3FFFFFFF; /* UARTA_CLK_SRC = 00, PLLP_OUT0 */
- writel(reg, &clkrst->crc_clk_src_uarta);
+ reset_set_enable(pid, 1);
+ clock_enable(pid);
+ clock_ll_set_source(pid, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
/* wait for 2us */
udelay(2);
/* De-assert reset to UART */
- reset_set_enable(PERIPH_ID_UART1, 0);
+ reset_set_enable(pid, 0);
+}
+
+/*
+ * Routine: clock_init_uart
+ * Description: init the PLL and clock for the UART(s)
+ */
+static void clock_init_uart(void)
+{
+#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
+ enable_uart(PERIPH_ID_UART1);
#endif /* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
- /* Assert UART reset and enable clock */
- reset_set_enable(PERIPH_ID_UART4, 1);
- clock_enable(PERIPH_ID_UART4);
-
- /* Enable pllp_out0 to UART */
- reg = readl(&clkrst->crc_clk_src_uartd);
- reg &= 0x3FFFFFFF; /* UARTD_CLK_SRC = 00, PLLP_OUT0 */
- writel(reg, &clkrst->crc_clk_src_uartd);
-
- /* wait for 2us */
- udelay(2);
-
- /* De-assert reset to UART */
- reset_set_enable(PERIPH_ID_UART4, 0);
+ enable_uart(PERIPH_ID_UART4);
#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
}
@@ -144,40 +113,8 @@ static void pin_mux_uart(void)
*/
static void clock_init_mmc(void)
{
- struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg;
-
- /* Do the SDMMC resets/clock enables */
- reset_set_enable(PERIPH_ID_SDMMC4, 1);
- clock_enable(PERIPH_ID_SDMMC4);
-
- /* Enable pllp_out0 to SDMMC4 */
- reg = readl(&clkrst->crc_clk_src_sdmmc4);
- reg &= 0x3FFFFF00; /* SDMMC4_CLK_SRC = 00, PLLP_OUT0 */
- reg |= (10 << 1); /* n-1, 11-1 shl 1 */
- writel(reg, &clkrst->crc_clk_src_sdmmc4);
-
- /*
- * As per the Tegra2 TRM, section 5.3.4:
- * 'Wait 2 us for the clock to flush through the pipe/logic'
- */
- udelay(2);
-
- reset_set_enable(PERIPH_ID_SDMMC4, 1);
-
- reset_set_enable(PERIPH_ID_SDMMC3, 1);
- clock_enable(PERIPH_ID_SDMMC3);
-
- /* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */
- reg = readl(&clkrst->crc_clk_src_sdmmc3);
- reg &= 0x3FFFFF00; /* SDMMC3_CLK_SRC = 00, PLLP_OUT0 */
- reg |= (10 << 1); /* n-1, 11-1 shl 1 */
- writel(reg, &clkrst->crc_clk_src_sdmmc3);
-
- /* wait for 2us */
- udelay(2);
-
- reset_set_enable(PERIPH_ID_SDMMC3, 0);
+ clock_start_periph_pll(PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH, 20000000);
+ clock_start_periph_pll(PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH, 20000000);
}
/*
@@ -226,6 +163,9 @@ static void pin_mux_mmc(void)
*/
int board_init(void)
{
+ clock_init();
+ clock_verify();
+
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
@@ -268,6 +208,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
+ /* Initialize essential common plls */
+ clock_early_init();
+
/* Initialize UART clocks */
clock_init_uart();