summaryrefslogtreecommitdiff
path: root/board/nvidia/harmony
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2011-10-31 06:51:35 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-09 17:30:08 +0100
commitae03661fda98465420016b410a27e6bf2a3c03f4 (patch)
treebf531c9e8a39a7b357e352ba20675b1d0e4c56b5 /board/nvidia/harmony
parentc4eba6ec5c58083b38340724c006294c7a4fe2eb (diff)
downloadu-boot-imx-ae03661fda98465420016b410a27e6bf2a3c03f4.zip
u-boot-imx-ae03661fda98465420016b410a27e6bf2a3c03f4.tar.gz
u-boot-imx-ae03661fda98465420016b410a27e6bf2a3c03f4.tar.bz2
tegra2: Move board_mmc_init into board files
For Seaboard, this is mostly a cut/paste of board_mmc_init() and pin_mux_mmc() into seaboard.c; pin_mux_mmc() was modified to add some missing pinmux_tristate_disable calls for the GPIOs. For Harmony, those functions were modified to configure SDMMC2 (index 2) instead of SDMMC3 (index 1), since that's what is present on the board. However, harmony.c is still missing the required GPIO setup, so neither port is likely to function correctly yet. This will be fixed in the next change. v4: Include board.h to prototype tegra2_mmc_init(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/harmony')
-rw-r--r--board/nvidia/harmony/harmony.c56
1 files changed, 56 insertions, 0 deletions
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index cbb30d6..f2c3867 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -24,9 +24,11 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
+#include <asm/arch/pinmux.h>
#ifdef CONFIG_TEGRA2_MMC
#include <mmc.h>
#endif
+#include "../common/board.h"
/*
* Routine: gpio_config_uart
@@ -38,6 +40,39 @@ void gpio_config_uart(void)
#ifdef CONFIG_TEGRA2_MMC
/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+ /* SDMMC4: config 3, x8 on 2nd set of pins */
+ pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+
+ pinmux_tristate_disable(PINGRP_ATB);
+ pinmux_tristate_disable(PINGRP_GMA);
+ pinmux_tristate_disable(PINGRP_GME);
+
+ /* For power GPIO PI6 */
+ pinmux_tristate_disable(PINGRP_ATA);
+ /* For CD GPIO PH2 */
+ pinmux_tristate_disable(PINGRP_ATD);
+
+ /* SDMMC2: SDIO2_CLK, SDIO2_CMD, SDIO2_DAT[7:0] */
+ pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
+ pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
+
+ pinmux_tristate_disable(PINGRP_DTA);
+ pinmux_tristate_disable(PINGRP_DTD);
+
+ /* For power GPIO PT3 */
+ pinmux_tristate_disable(PINGRP_DTB);
+ /* For CD GPIO PI5 */
+ pinmux_tristate_disable(PINGRP_ATC);
+}
+
+/*
* Routine: gpio_config_mmc
* Description: Set GPIOs for SD card
*/
@@ -47,6 +82,27 @@ void gpio_config_mmc(void)
}
/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ debug("board_mmc_init called\n");
+
+ /* Enable muxes, etc. for SDMMC controllers */
+ pin_mux_mmc();
+ gpio_config_mmc();
+
+ debug("board_mmc_init: init SD slot J26\n");
+ /* init dev 0, SD slot J26, with 4-bit bus */
+ /* The board has an 8-bit bus, but 8-bit doesn't work yet */
+ tegra2_mmc_init(0, 4);
+
+ debug("board_mmc_init: init SD slot J5\n");
+ /* init dev 2, SD slot J5, with 4-bit bus */
+ tegra2_mmc_init(2, 4);
+
+ return 0;
+}
+
+/* this is a weak define that we are overriding */
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
debug("board_mmc_getcd called\n");