diff options
author | Tom Rini <trini@ti.com> | 2013-03-18 12:31:00 -0400 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-03-18 14:37:18 -0400 |
commit | 0ce033d2582129243aca10d3072a221386bbba44 (patch) | |
tree | 6e50a3f4eed22007549dc740d0fa647a6c8cec5b /board/nvidia/cardhu/cardhu.c | |
parent | b5bec88434adb52413f1bc33fa63d7642cb8fd35 (diff) | |
parent | b27673ccbd3d5435319b5c09c3e7061f559f925d (diff) | |
download | u-boot-imx-0ce033d2582129243aca10d3072a221386bbba44.zip u-boot-imx-0ce033d2582129243aca10d3072a221386bbba44.tar.gz u-boot-imx-0ce033d2582129243aca10d3072a221386bbba44.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end. We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with proper formatting.
Conflicts:
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/lib/Makefile
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
doc/README.scrapyard
include/configs/tegra-common.h
Build tested for all of ARM and run-time tested on am335x_evm.
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/nvidia/cardhu/cardhu.c')
-rw-r--r-- | board/nvidia/cardhu/cardhu.c | 57 |
1 files changed, 56 insertions, 1 deletions
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c index df4cb6b..3544b41 100644 --- a/board/nvidia/cardhu/cardhu.c +++ b/board/nvidia/cardhu/cardhu.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2013 * NVIDIA Corporation <www.nvidia.com> * * See file CREDITS for list of people who contributed to this @@ -23,7 +23,12 @@ #include <common.h> #include <asm/arch/pinmux.h> +#include <asm/arch/gp_padctrl.h> #include "pinmux-config-cardhu.h" +#include <i2c.h> + +#define PMU_I2C_ADDRESS 0x2D +#define MAX_I2C_RETRY 3 /* * Routine: pinmux_init @@ -36,4 +41,54 @@ void pinmux_init(void) pinmux_config_table(unused_pins_lowpower, ARRAY_SIZE(unused_pins_lowpower)); + + /* Initialize any non-default pad configs (APB_MISC_GP regs) */ + padgrp_config_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl)); +} + +#if defined(CONFIG_TEGRA_MMC) +/* + * Do I2C/PMU writes to bring up SD card bus power + * + */ +void board_sdmmc_voltage_init(void) +{ + uchar reg, data_buffer[1]; + int i; + + i2c_set_bus_num(0); /* PMU is on bus 0 */ + + /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */ + data_buffer[0] = 0x65; + reg = 0x32; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } + + /* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */ + data_buffer[0] = 0x09; + reg = 0x67; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } +} + +/* + * Routine: pin_mux_mmc + * Description: setup the MMC muxes, power rails, etc. + */ +void pin_mux_mmc(void) +{ + /* + * NOTE: We don't do mmc-specific pin muxes here. + * They were done globally in pinmux_init(). + */ + + /* Bring up the SDIO1 power rail */ + board_sdmmc_voltage_init(); } +#endif /* MMC */ |