Prepare for SoC rework of ARM code:

- rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)

1 files changed, 188 insertions, 0 deletions

diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
new file mode 100644
index 0000000..8211beb
--- /dev/null
+++ b/board/mx1fs2/lowlevel_init.S
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl lowlevel_init
+lowlevel_init:
+
+	mov	r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+	ldr		r0,	=PCDR
+	ldr		r1,	=CFG_PCDR_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 0 */
+
+	ldr		r0,	=MPCTL0
+	ldr		r1,	=CFG_MPCTL0_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 1 */
+
+	ldr		r0,	=MPCTL1
+	ldr		r1,	=CFG_MPCTL1_VAL
+	str		r1,   [r0]
+
+/* set mpll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<21)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+/* set System PLL Control Register 0 */
+
+	ldr		r0,	=SPCTL0
+	ldr		r1,	=CFG_SPCTL0_VAL
+	str		r1,   [r0]
+
+/* set System PLL Control Register 1 */
+
+	ldr		r0,	=SPCTL1
+	ldr		r1,	=CFG_SPCTL1_VAL
+	str		r1,   [r0]
+
+/* set spll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<22)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+	ldr		r0,   =CSCR
+	ldr		r1,   =CFG_CSCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,   =GPCR
+	ldr		r1,   =CFG_GPCR_VAL
+	str		r1,   [r0]
+
+/*
+ * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ * this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too!  Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+ *
+ * Slapping this into my bootloader does the trick...
+ *
+ * MRC p15,0,r0,c1,c0,0    ; read core configuration register
+ * ORR r0,r0,#0xC0000000   ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0    ; write modified value to core configuration
+ * register
+ *
+ */
+	MRC p15,0,r0,c1,c0,0
+/*	ORR r0,r0,#0xC0000000 async mode */
+/*	ORR r0,r0,#0x40000000 sync mode */
+	ORR r0,r0,#0xC0000000
+	MCR p15,0,r0,c1,c0,0
+
+	ldr		r0,	=GIUS(0)
+	ldr		r1,	=CFG_GIUS_A_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=FMCR
+	ldr		r1,	=CFG_FMCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0U
+	ldr		r1,	=CFG_CS0U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0L
+	ldr		r1,	=CFG_CS0L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1U
+	ldr		r1,	=CFG_CS1U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1L
+	ldr		r1,	=CFG_CS1L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4U
+	ldr		r1,	=CFG_CS4U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4L
+	ldr		r1,	=CFG_CS4L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5U
+	ldr		r1,	=CFG_CS5U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5L
+	ldr		r1,	=CFG_CS5L_VAL
+	str		r1,   [r0]
+
+/* SDRAM Setup */
+
+	ldr  r1,=0x00221000   /* adr of SDCTRL0			*/
+	ldr  r0,=0x92120200
+	str  r0,[r1,#0]       /* put in precharge command mode    */
+	ldr  r2,=0x08200000   /* adr for precharge cmd 	   */
+	ldr  r0,[r2,#0]       /* precharge			   */
+	ldr  r0,=0xA2120200
+	ldr  r2,=0x08000000   /* start of SDRAM		   */
+	str  r0,[r1,#0]       /* put in auto-refresh mode	   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,[r2,#0]       /* auto-refresh  		   */
+	ldr  r0,=0xB2120200
+	ldr  r2,=0x08111800
+	str  r0,[r1,#0]       /* setup for mode register of SDRAM */
+	ldr  r0,[r2,#0]       /* program mode register 	   */
+	ldr  r0,=0x82124267
+	str  r0,[r1,#0]       /* back to normal operation	   */
+
+	mov	pc,r10