mx1ads: remove board support

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Stefano Babic <sbabic@denx.de>

1 files changed, 0 insertions, 178 deletions

diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
deleted file mode 100644
index 4266048..0000000
--- a/board/mx1ads/mx1ads.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * board/mx1ads/mx1ads.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-/*#include <mc9328.h>*/
-#include <asm/arch/imx-regs.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV	0xC3
-#define M_PDIV	0x4
-#define M_SDIV	0x1
-#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
-#define M_MDIV	0xA1
-#define M_PDIV	0x3
-#define M_SDIV	0x1
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV	0xA1
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV	0x48
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x2
-#endif
-
-#if 0
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-			  "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0" (loops));
-}
-
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-void SetAsynchMode (void)
-{
-	__asm__ ("mrc p15,0,r0,c1,c0,0 \n"
-		 "mov r2, #0xC0000000 \n"
-		 "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
-}
-
-static u32 mc9328sid;
-
-int board_early_init_f(void)
-{
-	mc9328sid = SIDR;
-
-	GPCR = 0x000003AB;	/* I/O pad driving strength     */
-
-	/*	MX1_CS1U	= 0x00000A00;	*/ /* SRAM initialization          */
-/*	MX1_CS1L	= 0x11110601;	*/
-
-	MPCTL0 = 0x04632410;	/* setting for 150 MHz MCU PLL CLK      */
-
-/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
- * BCLK divider to 2 (i.e. BCLK to 48 MHz)
- */
-	CSCR = 0xAF000403;
-
-	CSCR |= 0x00200000;	/* Trigger the restart bit(bit 21)      */
-	CSCR &= 0xFFFF7FFF;	/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
-
-/* setup cs4 for cs8900 ethernet */
-
-	CS4U = 0x00000F00;	/* Initialize CS4 for CS8900 ethernet   */
-	CS4L = 0x00001501;
-
-	GIUS (0) &= 0xFF3FFFFF;
-	GPR (0) &= 0xFF3FFFFF;
-
-	readl(0x1500000C);
-	readl(0x1500000C);
-
-	SetAsynchMode ();
-
-	icache_enable ();
-	dcache_enable ();
-
-/* set PERCLKs				*/
-	PCDR = 0x00000055;	/* set PERCLKS                          */
-
-/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
- * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
- * all sources selected as normal interrupt
- */
-
-/*	MX1_INTTYPEH = 0;
-	MX1_INTTYPEL = 0;
-*/
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
-
-	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters */
-
-	return 0;
-}
-
-int board_late_init (void)
-{
-
-	setenv ("stdout", "serial");
-	setenv ("stderr", "serial");
-
-	switch (mc9328sid) {
-	case 0x0005901d:
-		printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-	case 0x04d4c01d:
-		printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-	case 0x00d4c01d:
-		printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
-			mc9328sid);
-		break;
-
-	default:
-		printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
-			mc9328sid);
-		break;
-	}
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
-				PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif