powerpc: mpc824x: remove MPC824X cpu support

All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Josef Wagner <Wagner@Microsys.de>
Cc: Torsten Demke <torsten.demke@fci.com>
Cc: Jim Thompson <jim@musenki.com>
Cc: Greg Allen <gallen@arlut.utexas.edu>

6 files changed, 0 insertions, 911 deletions

diff --git a/board/musenki/Kconfig b/board/musenki/Kconfig
deleted file mode 100644
index 26b680f..0000000
--- a/board/musenki/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MUSENKI
-
-config SYS_BOARD
-	default "musenki"
-
-config SYS_CONFIG_NAME
-	default "MUSENKI"
-
-endif
diff --git a/board/musenki/MAINTAINERS b/board/musenki/MAINTAINERS
deleted file mode 100644
index 4196c80..0000000
--- a/board/musenki/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MUSENKI BOARD
-#M:	Jim Thompson <jim@musenki.com>
-S:	Orphan (since 2014-04)
-F:	board/musenki/
-F:	include/configs/MUSENKI.h
-F:	configs/MUSENKI_defconfig
diff --git a/board/musenki/Makefile b/board/musenki/Makefile
deleted file mode 100644
index d2b79ff..0000000
--- a/board/musenki/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= musenki.o flash.o
diff --git a/board/musenki/README b/board/musenki/README
deleted file mode 100644
index 084ab54..0000000
--- a/board/musenki/README
+++ /dev/null
@@ -1,298 +0,0 @@
-U-Boot for a Musenki M-3/M-1 board
----------------------------
-
-Musenki M-1 and M-3 have two banks of flash of 4MB or 8MB each.
-
-In board's notation, bank 0 is the one at the address of 0xFF800000
-and bank 1 is the one at the address of 0xFF000000.
-
-On power-up the processor jumps to the address of 0xFFF00100, the last
-megabyte of the bank 0 of flash.
-
-Thus, U-Boot is configured to reside in flash starting at the address of
-0xFFF00000.  The environment space is located in flash separately from
-U-Boot, at the address of 0xFF800000.
-
-There is a Davicom 9102A on-board, but I don't have it working yet.
-
-U-Boot test results
---------------------
-
-x.x Operation on all available serial consoles
-
-x.x.x CONFIG_CONS_INDEX 1
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=> help
-base    - print or set address offset
-bdinfo  - print Board Info structure
-bootm   - boot application image from memory
-bootp   - boot image via network using BootP/TFTP protocol
-bootd   - boot default, i.e., run 'bootcmd'
-cmp     - memory compare
-coninfo - print console devices and informations
-cp      - memory copy
-crc32   - checksum calculation
-dcache  - enable or disable data cache
-echo    - echo args to console
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-go      - start application at address 'addr'
-help    - print online help
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-loadb   - load binary file over serial line (kermit mode)
-loads   - load S-Record file over serial line
-loop    - infinite loop on address range
-md      - memory display
-mm      - memory modify (auto-incrementing)
-mtest   - simple RAM test
-mw      - memory write (fill)
-nm      - memory modify (constant address)
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-source  - run script from memory
-tftpboot- boot image via network using TFTP protocol
-	       and env variables ipaddr and serverip
-version - print monitor version
-?       - alias for 'help'
-
-
-x.x.x CONFIG_CONS_INDEX 2
-
-**** NOT TESTED ****
-
-x.x Flash Driver Operation
-
-
-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=>
-=> md ff800000
-ff800000: 46989bf8 626f6f74 636d643d 626f6f74    F...bootcmd=boot
-ff800010: 6d204646 38323030 30300062 6f6f7464    m FF820000.bootd
-ff800020: 656c6179 3d350062 61756472 6174653d    elay=5.baudrate=
-ff800030: 39363030 00636c6f 636b735f 696e5f6d    9600.clocks_in_m
-ff800040: 687a3d31 00737464 696e3d73 65726961    hz=1.stdin=seria
-ff800050: 6c007374 646f7574 3d736572 69616c00    l.stdout=serial.
-ff800060: 73746465 72723d73 65726961 6c006970    stderr=serial.ip
-ff800070: 61646472 3d313932 2e313638 2e302e34    addr=192.168.0.4
-ff800080: 32007365 72766572 69703d31 39322e31    2.serverip=192.1
-ff800090: 36382e30 2e380000 00000000 00000000    68.0.8..........
-ff8000a0: 00000000 00000000 00000000 00000000    ................
-ff8000b0: 00000000 00000000 00000000 00000000    ................
-ff8000c0: 00000000 00000000 00000000 00000000    ................
-ff8000d0: 00000000 00000000 00000000 00000000    ................
-ff8000e0: 00000000 00000000 00000000 00000000    ................
-ff8000f0: 00000000 00000000 00000000 00000000    ................
-=> protect off ff800000 ff81ffff
-Un-Protected 1 sectors
-=> erase ff800000 ff81ffff
-Erase Flash from 0xff800000 to 0xff81ffff
- done
-Erased 1 sectors
-=> md ff800000
-ff800000: ffffffff ffffffff ffffffff ffffffff    ................
-ff800010: ffffffff ffffffff ffffffff ffffffff    ................
-ff800020: ffffffff ffffffff ffffffff ffffffff    ................
-ff800030: ffffffff ffffffff ffffffff ffffffff    ................
-ff800040: ffffffff ffffffff ffffffff ffffffff    ................
-ff800050: ffffffff ffffffff ffffffff ffffffff    ................
-ff800060: ffffffff ffffffff ffffffff ffffffff    ................
-ff800070: ffffffff ffffffff ffffffff ffffffff    ................
-ff800080: ffffffff ffffffff ffffffff ffffffff    ................
-ff800090: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000a0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000b0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000c0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000d0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000e0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000f0: ffffffff ffffffff ffffffff ffffffff    ................
-
-x.x.x Information
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=> flinfo
-
-Bank # 1: Intel 28F320J3A (32Mbit = 128K x 32)
-  Size: 4 MB in 32 Sectors
-  Sector Start Addresses:
-    FF800000 (RO) FF820000      FF840000      FF860000      FF880000
-    FF8A0000      FF8C0000      FF8E0000      FF900000      FF920000
-    FF940000      FF960000      FF980000      FF9A0000      FF9C0000
-    FF9E0000      FFA00000      FFA20000      FFA40000      FFA60000
-    FFA80000      FFAA0000      FFAC0000      FFAE0000      FFB00000
-    FFB20000      FFB40000      FFB60000      FFB80000      FFBA0000
-    FFBC0000      FFBE0000
-
-Bank # 2: missing or unknown FLASH type
-=>
-
-
-x.x.x Flash Programming
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=>
-=>
-=>
-=> protect off ff800000 ff81ffff
-Un-Protected 1 sectors
-=> cp 0 ff800000 20
-Copy to Flash... done
-=> md ff800000
-ff800000: 37ce33ec 33cc334c 33c031cc 33cc35cc    7.3.3.3L3.1.3.5.
-ff800010: 33ec13ce 30ccb3ec b3c833c4 31c836cc    3...0.....3.1.6.
-ff800020: 33cc3b9d 31ec33ee 13ecf3cc 338833ec    3.;.1.3.....3.3.
-ff800030: 234c33ec 32cc22cc 33883bdc 534433cc    #L3.2.".3.;.SD3.
-ff800040: 33cc30c8 31cc32ec 338c33cc 330c33dc    3.0.1.2.3.3.3.3.
-ff800050: 33cc13dc 334c534c b1c433d8 128c13cc    3...3LSL..3.....
-ff800060: 37ec36cd 33dc33cc bbc9f7e8 bbcc77cc    7.6.3.3.......w.
-ff800070: 314c0adc 139c30ed 33cc334c 33c833ec    1L....0.3.3L3.3.
-ff800080: ffffffff ffffffff ffffffff ffffffff    ................
-ff800090: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000a0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000b0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000c0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000d0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000e0: ffffffff ffffffff ffffffff ffffffff    ................
-ff8000f0: ffffffff ffffffff ffffffff ffffffff    ................
-
-
-x.x.x Storage of environment variables in flash
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=> printenv
-bootcmd=bootm FF820000
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 106/16380 bytes
-=> setenv myvar 1234
-=> saveenv
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=> reset
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=> printenv
-bootcmd=bootm FF820000
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-myvar=1234
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 117/16380 bytes
-
-x.x Image Download and run over serial port
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM:  32 MB
-FLASH:  4 MB
-In:    serial
-Out:   serial
-Err:   serial
-Hit any key to stop autoboot:  0
-=> loads
-## Ready for S-Record download ...
-
-## First Load Addr = 0x00040000
-## Last  Load Addr = 0x00050177
-## Total Size      = 0x00010178 = 65912 Bytes
-## Start Addr      = 0x00040004
-=> go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-
-
-x.x Image download and run over ethernet interface
-
-untested (not working yet, actually)
diff --git a/board/musenki/flash.c b/board/musenki/flash.c
deleted file mode 100644
index 080ec7f..0000000
--- a/board/musenki/flash.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, uchar *dest, uchar data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-
-/*
- * don't ask.  its stupid, but more than one soul has had to live with this mistake
- * "swaptab[i]" is the value of "i" with the bits reversed.
- */
-
-#define  MUSENKI_BROKEN_FLASH 1
-
-#ifdef MUSENKI_BROKEN_FLASH
-unsigned char swaptab[256] = {
-  0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
-  0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
-  0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
-  0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
-  0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
-  0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
-  0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
-  0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
-  0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
-  0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
-  0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
-  0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
-  0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
-  0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
-  0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
-  0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
-  0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
-  0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
-  0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
-  0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
-  0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
-  0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
-  0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
-  0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
-  0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
-  0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
-  0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
-  0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
-  0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
-  0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
-  0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
-  0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
-};
-
-#define BS(b)     (swaptab[b])
-
-#else
-
-#define BS(b)     (b)
-
-#endif
-
-#define BYTEME(x) ((x) & 0xFF)
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE0_PRELIM);
-
-	size_b0 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0: "
-			"ID 0x%lx, Size = 0x%08lx = %ld MB\n",
-			flash_info[0].flash_id,
-			size_b0, size_b0<<20);
-	}
-
-	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE1_PRELIM);
-	size_b1 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, monitor_flash_len);
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		flash_info[1].size = size_b1;
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-		flash_info[1].size = 0;
-	}
-
-	DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-	    for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = base;
-		base += 0x00020000;		/* 128k per bank */
-	    }
-	    return;
-
-	default:
-	    printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
-	    return;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("Fujitsu ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	case FLASH_MAN_MT:	printf ("MT ");			break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F320J3A:	printf ("28F320J3A (32Mbit = 128K x 32)\n");
-				break;
-	case FLASH_28F640J3A:	printf ("28F640J3A (64Mbit = 128K x 64)\n");
-				break;
-	case FLASH_28F128J3A:	printf ("28F128J3A (128Mbit = 128K x 128)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	if (info->size >= (1 << 20)) {
-		i = 20;
-	} else {
-		i = 10;
-	}
-	printf ("  Size: %ld %cB in %d Sectors\n",
-		info->size >> i,
-		(i == 20) ? 'M' : 'k',
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info)
-{
-	vu_char manuf, device;
-
-	addr[0] = BS(0x90);
-	manuf = BS(addr[0]);
-	DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (vu_char *)addr, manuf);
-
-	switch (manuf) {
-	case BYTEME(AMD_MANUFACT):
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case BYTEME(FUJ_MANUFACT):
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case BYTEME(SST_MANUFACT):
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case BYTEME(STM_MANUFACT):
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	case BYTEME(INTEL_MANUFACT):
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = BS(0xFF);		/* restore read mode, (yes, BS is a NOP) */
-		return 0;			/* no or unknown flash	*/
-	}
-
-	device = BS(addr[2]);			/* device ID		*/
-
-	DEBUGF("Device ID @ 0x%08x: 0x%08x\n", (&addr[1]), device);
-
-	switch (device) {
-	case BYTEME(INTEL_ID_28F320J3A):
-		info->flash_id += FLASH_28F320J3A;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		break;				/* =>  4 MB		*/
-
-	case BYTEME(INTEL_ID_28F640J3A):
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case BYTEME(INTEL_ID_28F128J3A):
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;				/* => 16 MB		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		addr[0] = BS(0xFF);		/* restore read mode (yes, a NOP) */
-		return 0;			/* => no or unknown flash */
-
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = BS(0xFF);		/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
-		printf ("Can erase only Intel flash types - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer (0);
-	last  = start;
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_char *addr = (vu_char *)(info->start[sect]);
-			unsigned long status;
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			*addr = BS(0x50);	/* clear status register */
-			*addr = BS(0x20);	/* erase setup */
-			*addr = BS(0xD0);	/* erase confirm */
-
-			/* re-enable interrupts if necessary */
-			if (flag) {
-				enable_interrupts();
-			}
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay (1000);
-
-			while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = BS(0xB0); /* suspend erase	  */
-					*addr = BS(0xFF); /* reset to read mode */
-					return 1;
-				}
-
-				/* show that we're waiting */
-				if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-
-			*addr = BS(0xFF);	/* reset to read mode */
-		}
-	}
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-#define	FLASH_WIDTH	1	/* flash bus width in bytes */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	uchar *wp = (uchar *)addr;
-	int rc;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-
-	while (cnt > 0) {
-		if ((rc = write_data(info, wp, *src)) != 0) {
-			return rc;
-		}
-		wp++;
-		src++;
-		cnt--;
-	}
-
-	return cnt;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, uchar *dest, uchar data)
-{
-	vu_char *addr = (vu_char *)dest;
-	ulong status;
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((BS(*addr) & data) != data) {
-		return 2;
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	*addr = BS(0x40);		/* write setup */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag) {
-		enable_interrupts();
-	}
-
-	start = get_timer (0);
-
-	while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = BS(0xFF);	/* restore read mode */
-			return 1;
-		}
-	}
-
-	*addr = BS(0xFF);	/* restore read mode */
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c
deleted file mode 100644
index aa92fc4..0000000
--- a/board/musenki/musenki.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
-	ulong busfreq  = get_bus_freq(0);
-	char  buf[32];
-
-	printf("Board: MUSENKI Local Bus at %s MHz\n", strmhz(buf, busfreq));
-	return 0;
-
-}
-
-#if 0	/* NOT USED */
-int checkflash (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("## Test not implemented yet ##\n");
-
-	return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
-	long size;
-	long new_bank0_end;
-	long mear1;
-	long emear1;
-
-	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg(MEAR1);
-	emear1 = mpc824x_mpc107_getreg(EMEAR1);
-	mear1 = (mear1  & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg(MEAR1, mear1);
-	mpc824x_mpc107_setreg(EMEAR1, emear1);
-
-	return (size);
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
-#if 0
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  0x0, 0x0, 0x0, /* unknown eth0 divice */
-	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_IO |
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  0x0, 0x0, 0x0, /* unknown eth1 device */
-	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
-				       PCI_ENET1_MEMADDR,
-				       PCI_COMMAND_IO |
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-#endif
-	{ }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_sandpoint_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
-	pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}