* Patch by Scott McNutt, 04 Oct 2003:

  - add support for Altera Nios-32 CPU
  - add support for Nios Cyclone Development Kit (DK-1C20)

* Patch by Steven Scholz, 29 Sep 2003:
  - A second parameter for bootm overwrites the load address for
    "Standalone Application" images.
  - bootm sets environment variable "filesize" to the resulting
    (uncompressed) data length for "Standalone Application" images
    when autostart is set to "no". Now you can do something like
       if bootm $fpgadata $some_free_ram ; then
               fpga load 0 $some_free_ram $filesize
       fi

* Patch by Denis Peter, 25 Sept 2003:
  add support for the MIP405 Rev. C board

2 files changed, 29 insertions, 4 deletions

diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 99f97d7..98cfb0d 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -155,7 +155,7 @@ void setup_cs_reloc(void)
 
 unsigned long flash_init (void)
 {
-	unsigned long size_b0, size_b1,flashcr;
+	unsigned long size_b0, size_b1,flashcr, size_reg;
 	int mode, i;
 	extern char version_string;
 	char *p=&version_string;
@@ -196,6 +196,21 @@ unsigned long flash_init (void)
 	size_b1 = 0 ;
 	flash_info[0].size = size_b0;
 	/* set up flash cs according to the size */
+	size_reg=(flash_info[0].size >>20);
+	switch (size_reg) {
+		case 0:
+		case 1: i=0; break; /* <= 1MB */
+		case 2: i=1; break; /* = 2MB */
+		case 4: i=2; break; /* = 4MB */
+		case 8: i=3; break; /* = 8MB */
+		case 16: i=4; break; /* = 16MB */
+		case 32: i=5; break; /* = 32MB */
+		case 64: i=6; break; /* = 64MB */
+		case 128: i=7; break; /*= 128MB */
+		default: 
+			printf("\n #### ERROR, wrong size %ld MByte reset board #####\n",size_reg);
+			while(1);
+	}
 	if(mode & BOOT_MPS) {
 		/* flash is on CS1 */
 		mtdcr(ebccfga, pb1cr);
@@ -203,7 +218,7 @@ unsigned long flash_init (void)
 		/* we map the flash high in every case */
 		flashcr&=0x0001FFFF; /* mask out address bits */
 		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
-		flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+		flashcr|= (i << 17); /* size addr */
 		mtdcr(ebccfga, pb1cr);
 		mtdcr(ebccfgd, flashcr);
 	}
@@ -214,7 +229,7 @@ unsigned long flash_init (void)
 		/* we map the flash high in every case */
 		flashcr&=0x0001FFFF; /* mask out address bits */
 		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
-		flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+		flashcr|= (i << 17); /* size addr */
 		mtdcr(ebccfga, pb0cr);
 		mtdcr(ebccfgd, flashcr);
 	}
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 70eb5f4..c147175 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -167,6 +167,15 @@ const sdram_t sdram_table[] = {
 		3,	/* Address Mode = 3 */
 		5,	/* size value */
 		1},	/* ECC enabled */
+	{ 0x2f,	/* Rev C, 128MByte -3 Board */
+		3,	/* Case Latenty = 3 */
+		3,	/* trp 20ns / 7.5 ns datain[27] */
+		3,	/* trcd 20ns /7.5 ns (datain[29]) */
+		6,	/* tras 44ns /7.5 ns  (datain[30]) */
+		4,	/* tcpt 44 - 20ns = 24ns */
+		3,	/* Address Mode = 3 */
+		5,	/* size value */
+		1},	/* ECC enabled */
 	{ 0xff, /* terminator */
 	  0xff,
 	  0xff,
@@ -550,7 +559,8 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 		tmp >>= 1;
 	}
 	rc++;
-	if((((bc>>4) & 0xf)==0x1) /* Rev B PCB with */
+	if((  (((bc>>4) & 0xf)==0x2) /* Rev C PCB or */
+	   || (((bc>>4) & 0xf)==0x1)) /* Rev B PCB with */
 		&& (rc==0x1))     /* Population Option 1 is a -3 */
 		rc=3;
 	*pcbrev=(bc >> 4) & 0xf;