* Patches by David Müller, 31 Jan 2003:

  - minimal setup for CardBus bridges
  - add EEPROM read/write support in the CS8900 driver
  - add support for the builtin I2C controller in the Samsung s3c24x0 chips
  - add support for  MPL's VCMA9 (Samsung s3c2410 based) board

* Patch by Steven Scholz, 04 Feb 2003:
  add support for RTC DS1307

* Patch by Reinhard Meyer, 5 Feb 2003:
  fix PLPRCR/SCCR init sequence on 8xx to allow for
  changes of EBDF by software

* Patch by Vladimir Gurevich, 07 Feb 2003:
  "API-compatibility patch" for 4xx I2C driver

1 files changed, 248 insertions, 0 deletions

diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
new file mode 100644
index 0000000..8e3552e
--- /dev/null
+++ b/board/mpl/vcma9/vcma9.c
@@ -0,0 +1,248 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c2410.h>
+#include <i2c.h>
+
+#include "vcma9.h"
+#include "../common/common_util.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
+#define M_MDIV	0xA1
+#define M_PDIV	0x3
+#define M_SDIV	0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK==0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK==1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif
+
+static inline void delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* to reduce PLL lock time, adjust the LOCKTIME register */
+	rLOCKTIME = 0xFFFFFF;
+
+	/* configure MPLL */
+	rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (4000);
+
+	/* configure UPLL */
+	rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (8000);
+
+	/* set up the I/O ports */
+	rGPACON = 0x007FFFFF;
+	rGPBCON = 0x002AAAAA;
+	rGPBUP = 0x000002BF;
+	rGPCCON = 0xAAAAAAAA;
+	rGPCUP = 0x0000FFFF;
+	rGPDCON = 0xAAAAAAAA;
+	rGPDUP = 0x0000FFFF;
+	rGPECON = 0xAAAAAAAA;
+	rGPEUP = 0x000037F7;
+	rGPFCON = 0x00000000;
+	rGPFUP = 0x00000000;
+	rGPGCON = 0xFFEAFF5A;
+	rGPGUP = 0x0000F0DC;
+	rGPHCON = 0x0028AAAA;
+	rGPHUP = 0x00000656;
+
+	/* setup correct IRQ modes for NIC */
+	rEXTINT2 = (rEXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+
+	/* init serial */
+	gd->baudrate = CONFIG_BAUDRATE;
+	gd->have_console = 1;
+	serial_init();
+
+	/* arch number of VCMA9-Board */
+	gd->bd->bi_arch_number = 227;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x30000100;
+
+	icache_enable();
+	dcache_enable();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+/*
+ * Get some Board/PLD Info
+ */
+
+static uchar Get_PLD_ID(void)
+{
+	return(*(volatile uchar *)PLD_ID_REG);
+}
+
+static uchar Get_PLD_BOARD(void)
+{
+	return(*(volatile uchar *)PLD_BOARD_REG);
+}
+
+static uchar Get_PLD_Version(void)
+{
+	return((Get_PLD_ID() >> 4) & 0x0F);
+}
+
+static uchar Get_PLD_Revision(void)
+{
+	return(Get_PLD_ID() & 0x0F);
+}
+
+static int Get_Board_Config(void)
+{
+	uchar config = Get_PLD_BOARD() & 0x03;
+
+	if (config == 3)
+	    return 1;
+	else
+	    return 0;
+}
+
+static uchar Get_Board_PCB(void)
+{
+	return(((Get_PLD_BOARD() >> 4) & 0x03) + 'A');
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard(void)
+{
+	unsigned char s[50];
+	unsigned char bc, var, rc;
+	int i;
+	backup_t *b = (backup_t *) s;
+
+	puts("Board: ");
+
+	i = getenv_r("serial#", s, 32);
+	if ((i < 0) || strncmp (s, "VCMA9", 5)) {
+		get_backup_values (b);
+		if (strncmp (b->signature, "MPL\0", 4) != 0) {
+			puts ("### No HW ID - assuming VCMA9");
+		} else {
+			b->serial_name[5] = 0;
+			printf ("%s-%d Rev %c SN: %s", b->serial_name, Get_Board_Config(),
+					Get_Board_PCB(), &b->serial_name[6]);
+		}
+	} else {
+		s[5] = 0;
+		printf ("%s-%d Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
+				&s[6]);
+	}
+	printf("\n");
+	return(0);
+}
+
+
+
+void print_vcma9_rev(void)
+{
+	printf("Board: VCMA9-%d Rev: %c (PLD Ver: %d, Rev: %d)\n",
+		Get_Board_Config(), Get_Board_PCB(),
+		Get_PLD_Version(), Get_PLD_Revision());
+}
+
+
+int last_stage_init(void)
+{
+	print_vcma9_rev();
+	show_stdio_dev();
+	check_env();
+	return 0;
+}
+
+/***************************************************************************
+ * some helping routines
+ */
+
+int overwrite_console(void)
+{
+	/* return TRUE if console should be overwritten */
+	return 0;
+}
+
+
+/************************************************************************
+* Print VCMA9 Info
+************************************************************************/
+void print_vcma9_info(void)
+{
+    print_vcma9_rev();
+}
+
+