summaryrefslogtreecommitdiff
path: root/board/mpl/pati/pati.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-02 16:05:07 +0000
committerwdenk <wdenk>2004-01-02 16:05:07 +0000
commitb6e4c4033c4f889c452c511d38c77808c67f9cf7 (patch)
tree73a39833805f4cf47588dd1616a1b479ab58a418 /board/mpl/pati/pati.c
parent63f3491242df8e6bd1b5df7296f28959989e2eaf (diff)
downloadu-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.zip
u-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.tar.gz
u-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.tar.bz2
* Patch by Denis Peter, 8 Dec 2003
- add support for the PATI board (MPC555) - add SPI support for the MPC5xx * Patch by Anders Larsen, 08 Dec 2003: add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; cleanup some redundand #defines
Diffstat (limited to 'board/mpl/pati/pati.c')
-rw-r--r--board/mpl/pati/pati.c618
1 files changed, 618 insertions, 0 deletions
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
new file mode 100644
index 0000000..0355b65
--- /dev/null
+++ b/board/mpl/pati/pati.c
@@ -0,0 +1,618 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ * Atapted for PATI
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/***********************************************************************************
+ * Bits for the SDRAM controller
+ * -----------------------------
+ *
+ * CAL: CAS Latency. If cleared to 0 (default) the SDRAM controller asserts TA# on
+ * the 2nd Clock after ACTIVE command (CAS Latency = 2). If set to 1 the SDRAM
+ * controller asserts TA# on the 3rd Clock after ACTIVE command (CAS Latency = 3).
+ * RCD: RCD ACTIVE to READ or WRITE Delay (Ras to Cas Delay). If cleared 0 (default)
+ * tRCD of the SDRAM must equal or less 25ns. If set to 1 tRCD must be equal or less 50ns.
+ * WREC:Write Recovery. If cleared 0 (default) tWR of the SDRAM must equal or less 25ns.
+ * If set to 1 tWR must be equal or less 50ns.
+ * RP: Precharge Command Time. If cleared 0 (default) tRP of the SDRAM must equal or less
+ * 25ns. If set to 1 tRP must be equal or less 50ns.
+ * RC: Auto Refresh to Active Time. If cleared 0 (default) tRC of the SDRAM must equal
+ * or less 75ns. If set to 1 tRC must be equal or less 100ns.
+ * LMR: Bit to set the Mode Register of the SDRAM. If set, the next access to the SDRAM
+ * is the Load Mode Register Command.
+ * IIP: Init in progress. Set to 1 for starting the init sequence
+ * (Precharge All). As long this bit is set, the Precharge All is still in progress.
+ * After command has completed, wait at least for 8 refresh (200usec) before proceed.
+ **********************************************************************************/
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <devices.h>
+#include <pci_ids.h>
+#define PLX9056_LOC
+#include "plx9056.h"
+#include "pati.h"
+
+#if defined(__APPLE__)
+/* Leading underscore on symbols */
+# define SYM_CHAR "_"
+#else /* No leading character on symbols */
+# define SYM_CHAR
+#endif
+
+#undef SDRAM_DEBUG
+/*
+ * Macros to generate global absolutes.
+ */
+#define GEN_SYMNAME(str) SYM_CHAR #str
+#define GEN_VALUE(str) #str
+#define GEN_ABS(name, value) \
+ asm (".globl " GEN_SYMNAME(name)); \
+ asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
+
+
+/************************************************************************
+ * Early debug routines
+ */
+void write_hex (unsigned char i)
+{
+ char cc;
+
+ cc = i >> 4;
+ cc &= 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+ cc = i & 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+}
+
+#if defined(SDRAM_DEBUG)
+
+void write_4hex (unsigned long val)
+{
+ write_hex ((unsigned char) (val >> 24));
+ write_hex ((unsigned char) (val >> 16));
+ write_hex ((unsigned char) (val >> 8));
+ write_hex ((unsigned char) val);
+}
+
+#endif
+
+unsigned long in32(unsigned long addr)
+{
+ unsigned long *p=(unsigned long *)addr;
+ return *p;
+}
+
+void out32(unsigned long addr,unsigned long data)
+{
+ unsigned long *p=(unsigned long *)addr;
+ *p=data;
+}
+
+typedef struct {
+ unsigned short boardtype; /* Board revision and Population Options */
+ unsigned char cal; /* cas Latency 0:CAL=2 1:CAL=3 */
+ unsigned char rcd; /* ras to cas delay 0:<25ns 1:<50ns*/
+ unsigned char wrec; /* write recovery 0:<25ns 1:<50ns */
+ unsigned char pr; /* Precharge Command Time 0:<25ns 1:<50ns */
+ unsigned char rc; /* Auto Refresh to Active Time 0:<75ns 1:<100ns */
+ unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
+} sdram_t;
+
+const sdram_t sdram_table[] = {
+ { 0x0000, /* PATI Rev A, 16MByte -1 Board */
+ 1, /* Case Latenty = 3 */
+ 0, /* ras to cas delay 0 (20ns) */
+ 0, /* write recovery 0:<25ns 1:<50ns*/
+ 0, /* Precharge Command Time 0 (20ns) */
+ 0, /* Auto Refresh to Active Time 0 (68) */
+ 2 /* log binary => Size 2 = 16MByte, 1=8 */
+ },
+ { 0xffff, /* terminator */
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff }
+};
+
+
+extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
+extern void mem_test_reloc(void);
+
+/*
+ * Get RAM size.
+ */
+long int initdram(int board_type)
+{
+ unsigned char board_rev;
+ unsigned long reg;
+ unsigned long lmr;
+ int i,timeout;
+
+#if defined(SDRAM_DEBUG)
+ reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+ puts("\n\nSYSTEM part 0x"); write_4hex(SYSCNTR_PART(reg));
+ puts(" Vers 0x"); write_4hex(SYSCNTR_ID(reg));
+ puts("\nSDRAM part 0x"); write_4hex(SDRAM_PART(reg));
+ puts(" Vers 0x"); write_4hex(SDRAM_ID(reg));
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ puts("\nBoard rev. 0x"); write_4hex(SYSCNTR_BREV(reg));
+ putc('\n');
+#endif
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ board_rev=(unsigned char)(SYSCNTR_BREV(reg));
+ i=0;
+ while(1) {
+ if(sdram_table[i].boardtype==0xffff) {
+ puts("ERROR, found no table for Board 0x");
+ write_hex(board_rev);
+ while(1);
+ }
+ if(sdram_table[i].boardtype==(unsigned char)board_rev)
+ break;
+ i++;
+ }
+ /* Set CAL, RCD, WREQ, PR and RC Bits */
+#if defined(SDRAM_DEBUG)
+ puts("Set CAL, RCD, WREQ, PR and RC Bits\n");
+#endif
+ /* mask bits */
+ reg &= ~(SET_REG_BIT(1,SDRAM_CAL) | SET_REG_BIT(1,SDRAM_RCD) | SET_REG_BIT(1,SDRAM_WREQ) |
+ SET_REG_BIT(1,SDRAM_PR) | SET_REG_BIT(1,SDRAM_RC) | SET_REG_BIT(1,SDRAM_LMR) |
+ SET_REG_BIT(1,SDRAM_IIP) | SET_REG_BIT(1,SDRAM_RES0));
+ /* set bits */
+ reg |= (SET_REG_BIT(sdram_table[i].cal,SDRAM_CAL) |
+ SET_REG_BIT(sdram_table[i].rcd,SDRAM_RCD) |
+ SET_REG_BIT(sdram_table[i].wrec,SDRAM_WREQ) |
+ SET_REG_BIT(sdram_table[i].pr,SDRAM_PR) |
+ SET_REG_BIT(sdram_table[i].rc,SDRAM_RC));
+
+ out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+ /* step 2 set IIP */
+#if defined(SDRAM_DEBUG)
+ puts("step 2 set IIP\n");
+#endif
+ /* step 2 set IIP */
+ reg |= SET_REG_BIT(1,SDRAM_IIP);
+ timeout=0;
+ while (timeout!=0xffff) {
+ __asm__ volatile("eieio");
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ if((reg & SET_REG_BIT(1,SDRAM_IIP))==0)
+ break;
+ timeout++;
+ udelay(1);
+ }
+ /* wait for at least 8 refresh */
+ udelay(1000);
+ /* set LMR */
+ reg |= SET_REG_BIT(1,SDRAM_LMR);
+ out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+ __asm__ volatile("eieio");
+ lmr=0x00000002; /* sequential burst 4 data */
+ if(sdram_table[i].cal==1)
+ lmr|=0x00000030; /* cal = 3 */
+ else
+ lmr|=0000000020; /* cal = 2 */
+ /* rest standard operation programmed write burst length */
+ /* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
+ lmr<<=2;
+ in32(CFG_SDRAM_BASE + lmr);
+ /* ok, we're done, return SDRAM size */
+ return ((0x400000 << sdram_table[i].sz)); /* log2 value of 4MByte */
+}
+
+
+void set_flash_vpp(int ext_vpp, int ext_wp, int int_vpp)
+{
+ unsigned long reg;
+ reg=in32(PLD_CONF_REG2+PLD_CONFIG_BASE);
+ reg &= ~(SET_REG_BIT(1,SYSCNTR_CPU_VPP) |
+ SET_REG_BIT(1,SYSCNTR_FL_VPP) |
+ SET_REG_BIT(1,SYSCNTR_FL_WP));
+
+ reg |= (SET_REG_BIT(int_vpp,SYSCNTR_CPU_VPP) |
+ SET_REG_BIT(ext_vpp,SYSCNTR_FL_VPP) |
+ SET_REG_BIT(ext_wp,SYSCNTR_FL_WP));
+ out32(PLD_CONF_REG2+PLD_CONFIG_BASE,reg);
+ udelay(100);
+}
+
+
+void show_pld_regs(void)
+{
+ unsigned long reg,reg1;
+ reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+ printf("\nSYSTEM part %ld, Vers %ld\n",SYSCNTR_PART(reg),SYSCNTR_ID(reg));
+ printf("SDRAM part %ld, Vers %ld\n",SDRAM_PART(reg),SDRAM_ID(reg));
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ printf("Board rev. %c\n",(char) (SYSCNTR_BREV(reg)+'A'));
+ printf("Waitstates %ld\n",GET_SYSCNTR_FLWAIT(reg));
+ printf("SDRAM: CAL=%ld RCD=%ld WREQ=%ld PR=%ld\n RC=%ld LMR=%ld IIP=%ld\n",
+ GET_REG_BIT(reg,SDRAM_CAL),GET_REG_BIT(reg,SDRAM_RCD),
+ GET_REG_BIT(reg,SDRAM_WREQ),GET_REG_BIT(reg,SDRAM_PR),
+ GET_REG_BIT(reg,SDRAM_RC),GET_REG_BIT(reg,SDRAM_LMR),
+ GET_REG_BIT(reg,SDRAM_IIP));
+ reg=in32(PLD_CONFIG_BASE+PLD_CONF_REG1);
+ reg1=in32(PLD_CONFIG_BASE+PLD_CONF_REG2);
+ printf("HW Config: FLAG=%ld IP=%ld index=%ld PRPM=%ld\n ICW=%ld ISB=%ld BDIS=%ld PCIM=%ld\n",
+ GET_REG_BIT(reg,SYSCNTR_FLAG),GET_REG_BIT(reg,SYSCNTR_IP),
+ GET_SYSCNTR_BOOTIND(reg),GET_REG_BIT(reg,SYSCNTR_PRM),
+ GET_REG_BIT(reg,SYSCNTR_ICW),GET_SYSCNTR_ISB(reg),
+ GET_REG_BIT(reg1,SYSCNTR_BDIS),GET_REG_BIT(reg1,SYSCNTR_PCIM));
+ printf("Switches: MUX=%ld PCI_DIS=%ld Boot_EN=%ld Config=%ld\n",GET_SDRAM_MUX(reg),
+ GET_REG_BIT(reg,SDRAM_PDIS),GET_REG_BIT(reg1,SYSCNTR_BOOTEN),
+ GET_SYSCNTR_CFG(reg1));
+ printf("Misc: RIP=%ld CPU_VPP=%ld FLSH_VPP=%ld FLSH_WP=%ld\n\n",
+ GET_REG_BIT(reg,SDRAM_RIP),GET_REG_BIT(reg1,SYSCNTR_CPU_VPP),
+ GET_REG_BIT(reg1,SYSCNTR_FL_VPP),GET_REG_BIT(reg1,SYSCNTR_FL_WP));
+}
+
+
+/****************************************************************
+ * Setting IOs
+ * -----------
+ * GPIO6 is User LED1
+ * GPIO7 is Interrupt PLX (Output)
+ * GPIO5 is User LED0
+ * GPIO2 is PLX USERi (Output)
+ * GPIO1 is PLX Interrupt (Input)
+ ****************************************************************/
+ void init_ios(void)
+ {
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiocr; /* Data direction register */
+ reg &= ~0x67000000;
+ reg |= 0x27000000; /* set outpupts */
+ sysconf->sc_sgpiocr=reg; /* Data direction register */
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ /* set output to 0 */
+ reg &= ~0x27000000;
+ /* set IRQ and USERi to 1 */
+ reg |= 0x28000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led0(int led_on)
+{
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ if(led_on) /* set output to 1 */
+ reg |= 0x04000000;
+ else
+ reg &= ~0x04000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led1(int led_on)
+{
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ if(led_on) /* set output to 1 */
+ reg |= 0x02000000;
+ else
+ reg &= ~0x02000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+
+/****************************************************************
+ * Last Stage Init
+ ****************************************************************/
+int last_stage_init (void)
+{
+ mem_test_reloc();
+ init_ios();
+ return 0;
+}
+
+/****************************************************************
+ * Check the board
+ ****************************************************************/
+
+#define BOARD_NAME "PATI"
+
+int checkboard (void)
+{
+ unsigned char s[50];
+ unsigned long reg;
+ char rev;
+ int i;
+
+ puts ("\nBoard: ");
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ rev=(char)(SYSCNTR_BREV(reg)+'A');
+ i = getenv_r ("serial#", s, 32);
+ if ((i == -1)) {
+ puts ("### No HW ID - assuming " BOARD_NAME);
+ printf(" Rev. %c\n",rev);
+ }
+ else {
+ s[sizeof(BOARD_NAME)-1] = 0;
+ printf ("%s-1 Rev %c SN: %s\n", s,rev,
+ &s[sizeof(BOARD_NAME)]);
+ }
+ set_flash_vpp(1,0,0); /* set Flash VPP */
+ return 0;
+}
+
+
+#ifdef CFG_PCI_CON_DEVICE
+/************************************************************************
+ * PCI Communication
+ *
+ * Alive (Pinging):
+ * ----------------
+ * PCI Host sends message ALIVE, Local acknowledges with ALIVE
+ *
+ * PCI_CON console over PCI:
+ * -------------------------
+ * Local side:
+ * - uses PCI9056_LOC_TO_PCI_DBELL register to signal that
+ * data is avaible (PCIMSG_CONN)
+ * - uses PCI9056_MAILBOX1 to send data
+ * - uses PCI9056_MAILBOX0 to receive data
+ * PCI side:
+ * - uses PCI9056_PCI_TO_LOC_DBELL register to signal that
+ * data is avaible (PCIMSG_CONN)
+ * - uses PCI9056_MAILBOX0 to send data
+ * - uses PCI9056_MAILBOX1 to receive data
+ *
+ * How it works:
+ * Send:
+ * - check if PCICON_TRANSMIT_REG is empty
+ * - write data or'ed with 0x80000000 into the PCICON_TRANSMIT_REG
+ * - write PCIMSG_CONN into the PCICON_DBELL_REG to signal a data
+ * is waiting
+ * Receive:
+ * - get an interrupt via the PCICON_ACK_REG register message
+ * PCIMSG_CONN
+ * - write the data from the PCICON_RECEIVE_REG into the receive
+ * buffer and if the receive buffer is not full, clear the
+ * PCICON_RECEIVE_REG (this allows the counterpart to write more data)
+ * - Clear the interrupt by writing 0xFFFFFFFF to the PCICON_ACK_REG
+ *
+ * The PCICON_RECEIVE_REG must be cleared by the routine which reads
+ * the receive buffer if the buffer is not full any more
+ *
+ */
+
+#undef PCI_CON_DEBUG
+
+#ifdef PCI_CON_DEBUG
+#define PCI_CON_PRINTF(fmt,args...) serial_printf (fmt ,##args)
+#else
+#define PCI_CON_PRINTF(fmt,args...)
+#endif
+
+
+/*********************************************************
+ * we work only with a receive buffer on eiter side.
+ * Transmit buffer is free, if mailbox is cleared.
+ * Transmit character is or'ed with 0x80000000
+ * PATI receive register MAILBOX0
+ * PATI transmit register MAILBOX1
+ *********************************************************/
+#define PCICON_RECEIVE_REG PCI9056_MAILBOX0
+#define PCICON_TRANSMIT_REG PCI9056_MAILBOX1
+#define PCICON_DBELL_REG PCI9056_LOC_TO_PCI_DBELL
+#define PCICON_ACK_REG PCI9056_PCI_TO_LOC_DBELL
+
+
+#define PCIMSG_ALIVE 0x1
+#define PCIMSG_CONN 0x2
+#define PCIMSG_DISC 0x3
+#define PCIMSG_CON_DATA 0x5
+
+
+#define PCICON_GET_REG(x) (in32(x + PCI_CONFIG_BASE))
+#define PCICON_SET_REG(x,y) (out32(x + PCI_CONFIG_BASE,y))
+#define PCICON_TX_FLAG 0x80000000
+
+
+#define REC_BUFFER_SIZE 0x100
+int recbuf[REC_BUFFER_SIZE];
+static int r_ptr = 0;
+int w_ptr;
+device_t pci_con_dev;
+int conn=0;
+int buff_full=0;
+
+void pci_con_put_it(const char c)
+{
+ /* Test for completition */
+ unsigned long reg;
+ do {
+ reg=PCICON_GET_REG(PCICON_TRANSMIT_REG);
+ }while(reg);
+ reg=PCICON_TX_FLAG + c;
+ PCICON_SET_REG(PCICON_TRANSMIT_REG,reg);
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
+}
+
+void pci_con_putc(const char c)
+{
+ pci_con_put_it(c);
+ if(c == '\n')
+ pci_con_put_it('\r');
+}
+
+
+int pci_con_getc(void)
+{
+ int res;
+ int diff;
+ while(r_ptr==(volatile int)w_ptr);
+ res=recbuf[r_ptr++];
+ if(r_ptr==REC_BUFFER_SIZE)
+ r_ptr=0;
+ if(w_ptr<r_ptr)
+ diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+ else
+ diff=r_ptr-w_ptr;
+ if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
+ /* clear Mail box */
+ buff_full=0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ }
+ return res;
+}
+
+int pci_con_tstc(void)
+{
+ if(r_ptr==(volatile int)w_ptr)
+ return 0;
+ return 1;
+}
+
+void pci_con_puts (const char *s)
+{
+ while (*s) {
+ pci_con_putc(*s);
+ ++s;
+ }
+}
+
+void pci_con_init (void)
+{
+ w_ptr = 0;
+ r_ptr = 0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ conn=1;
+}
+
+/*******************************************
+ * IRQ routine
+ ******************************************/
+int pci_dorbell_irq(void)
+{
+ unsigned long reg,data;
+ int diff;
+ reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+ PCI_CON_PRINTF(" PCI9056_INT_CTRL_STAT = %08lX\n",reg);
+ if(reg & (1<<20) ) {
+ /* read doorbell */
+ reg=PCICON_GET_REG(PCICON_ACK_REG);
+ switch(reg) {
+ case PCIMSG_ALIVE:
+ PCI_CON_PRINTF(" Alive\n");
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_ALIVE);
+ break;
+ case PCIMSG_CONN:
+ PCI_CON_PRINTF(" Conn %d",conn);
+ w_ptr = 0;
+ r_ptr = 0;
+ buff_full=0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ conn=1;
+ PCI_CON_PRINTF(" ... %d\n",conn);
+ break;
+ case PCIMSG_CON_DATA:
+ data=PCICON_GET_REG(PCICON_RECEIVE_REG);
+ recbuf[w_ptr++]=(int)(data&0xff);
+ PCI_CON_PRINTF(" Data Console %lX, %X %d %d %X\n",data,((int)(data&0xFF)),
+ r_ptr,w_ptr,recbuf[w_ptr-1]);
+ if(w_ptr==REC_BUFFER_SIZE)
+ w_ptr=0;
+ if(w_ptr<r_ptr)
+ diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+ else
+ diff=r_ptr-w_ptr;
+ if(diff>(REC_BUFFER_SIZE-4))
+ buff_full=1;
+ else
+ /* clear Mail box */
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ break;
+ default:
+ serial_printf(" PCI9056_PCI_TO_LOC_DBELL = %08lX\n",reg);
+ }
+ /* clear IRQ */
+ PCICON_SET_REG(PCICON_ACK_REG,~0L);
+ }
+ return 0;
+}
+
+void pci_con_connect(void)
+{
+ unsigned long reg;
+ conn=0;
+ reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+ /* default 0x0f010180 */
+ reg &= 0xff000000;
+ reg |= 0x00030000; /* enable local dorbell */
+ reg |= 0x00000300; /* enable PCI dorbell */
+ PCICON_SET_REG(PCI9056_INT_CTRL_STAT , reg);
+ irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
+ memset (&pci_con_dev, 0, sizeof (pci_con_dev));
+ strcpy (pci_con_dev.name, "pci_con");
+ pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ pci_con_dev.putc = pci_con_putc;
+ pci_con_dev.puts = pci_con_puts;
+ pci_con_dev.getc = pci_con_getc;
+ pci_con_dev.tstc = pci_con_tstc;
+ device_register (&pci_con_dev);
+ printf("PATI ready for PCI connection, type ctrl-c for exit\n");
+ do {
+ udelay(10);
+ if((volatile int)conn)
+ break;
+ if(ctrlc()) {
+ irq_free_handler(0x2);
+ return;
+ }
+ }while(1);
+ console_assign(stdin,"pci_con");
+ console_assign(stderr,"pci_con");
+ console_assign(stdout,"pci_con");
+}
+
+void pci_con_disc(void)
+{
+ console_assign(stdin,"serial");
+ console_assign(stderr,"serial");
+ console_assign(stdout,"serial");
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_DISC);
+ /* reconnection */
+ irq_free_handler(0x02);
+ pci_con_connect();
+}
+#endif /* #ifdef CFG_PCI_CON_DEVICE */
+
+/*
+ * Absolute environment address for linker file.
+ */
+GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);