diff options
| author | wdenk <wdenk> | 2003-04-05 00:53:31 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-04-05 00:53:31 +0000 |
| commit | 3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 (patch) | |
| tree | bec2e661298847dc5bcf9335ef31259686e882e1 /board/mpl/mip405/mip405.c | |
| parent | 36c05a80ecbe3997abd9aa628a68dd6c0bacf681 (diff) | |
| download | u-boot-imx-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.zip u-boot-imx-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.tar.gz u-boot-imx-3e38691e8f7aa0d9b498d76c7279ddec6e4946f3.tar.bz2 | |
* Patch by Arun Dharankar, 4 Apr 2003:
Add IDMA example code (tested on 8260 only)
* Add support for Purple Board (MIPS64 5Kc)
* Add support for MIPS64 5Kc CPUs
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
* Patch by Denis Peter, 04 Apr 2003:
- update MIP405-4 board
* Patches by Denis Peter, 03 April 2003:
- fix PCI IRQs on MPL boards
- fix two more un-relocated pointer problems
* Fix behaviour of "run" command:
- print error message iv variable does not exist
- terminate processing of arguments in case of error
* Patches by Peter Figuli, 10 Mar 2003
- Add support for BTUART on PXA platform
- Add support for WEP EP250 (PXA) board
* Fix flash problems on INCA-IP; add tool to allow bruning images to
flash using a BDI2000
* Implement fix for I2C Edge Conditions problem for all boards that
use the bit-banging driver (common/soft_i2c.c)
* Add patches by Robert Schwebel, 31 Mar 2003:
- csb226 board: bring in sync with innokom/memsetup.S
- csb226 board: fix MDREFR handling
- misc doc fixes / extensions
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
- add BOOT_PROGRESS to armlinux.c
Diffstat (limited to 'board/mpl/mip405/mip405.c')
| -rw-r--r-- | board/mpl/mip405/mip405.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 8bab47c..95ad97c 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -128,6 +128,15 @@ const sdram_t sdram_table[] = { 2, /* Address Mode = 2 */ 4, /* size value */ 1}, /* ECC enabled */ + { 0x03, /* Rev A, 128MByte -4 Board */ + 3, /* Case Latenty = 3 */ + 3, /* trp 20ns / 7.5 ns datain[27] */ + 3, /* trcd 20ns /7.5 ns (datain[29]) */ + 6, /* tras 44ns /7.5 ns (datain[30]) */ + 4, /* tcpt 44 - 20ns = 24ns */ + 3, /* Address Mode = 3 */ + 5, /* size value */ + 1}, /* ECC enabled */ { 0xff, /* terminator */ 0xff, 0xff, @@ -616,9 +625,15 @@ void print_mip405_rev (void) int last_stage_init (void) { + /* write correct LED configuration */ if (miiphy_write (0x1, 0x14, 0x2402) != 0) { printf ("Error writing to the PHY\n"); } + /* since LED/CFG2 is not connected on the -2, + * write to correct capability information */ + if (miiphy_write (0x1, 0x4, 0x01E1) != 0) { + printf ("Error writing to the PHY\n"); + } print_mip405_rev (); show_stdio_dev (); check_env (); |