summaryrefslogtreecommitdiff
path: root/board/mpc7448hpc2
diff options
context:
space:
mode:
authorroy zang <tie-fei.zang@freescale.com>2006-12-01 11:47:36 +0800
committerZang Tiefei <roy@bus.ap.freescale.net>2006-12-01 11:47:36 +0800
commitee311214e0d216f904feea269599d0934bf71f23 (patch)
tree8f942227d016d8cc52a12f4b66a02e4b1e7ed19b /board/mpc7448hpc2
parent6bd87c0aeea441c49d59fd542b84a9be88d08b17 (diff)
downloadu-boot-imx-ee311214e0d216f904feea269599d0934bf71f23.zip
u-boot-imx-ee311214e0d216f904feea269599d0934bf71f23.tar.gz
u-boot-imx-ee311214e0d216f904feea269599d0934bf71f23.tar.bz2
Clean up the code according to codestyle:
(1) remove some C++ comments. (2) remove trailing white space. (3) remove trailing empty line. (4) Indentation by table. (5) remove {} in one line condition. (6) add space before '(' in function call. Remove some weird printf () output. Add necessary comments. Modified Makefile to support building in a separate directory.
Diffstat (limited to 'board/mpc7448hpc2')
-rw-r--r--board/mpc7448hpc2/Makefile20
-rw-r--r--board/mpc7448hpc2/asm_init.S1143
-rw-r--r--board/mpc7448hpc2/mpc7448hpc2.c152
-rw-r--r--board/mpc7448hpc2/tsi108_init.c421
4 files changed, 851 insertions, 885 deletions
diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile
index d5ed01f..e3d757d 100644
--- a/board/mpc7448hpc2/Makefile
+++ b/board/mpc7448hpc2/Makefile
@@ -23,26 +23,30 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o tsi108_init.o
+COBJS := $(BOARD).o tsi108_init.o
+SOBJS := asm_init.o
-SOBJS = asm_init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
+.PHONY: distclean
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude ($obj).depend
#########################################################################
diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S
index 8c15a3d..a7a40a1 100644
--- a/board/mpc7448hpc2/asm_init.S
+++ b/board/mpc7448hpc2/asm_init.S
@@ -1,10 +1,10 @@
-/*****************************************************************************
+/*
* (C) Copyright 2004-05; Tundra Semiconductor Corp.
- *
+ *
* Added automatic detect of SDC settings
* Copyright (c) 2005 Freescale Semiconductor, Inc.
* Maintainer tie-fei.zang@freescale.com
- *
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -19,9 +19,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- ****************************************************************************/
+ */
-/*----------------------------------------------------------------------------
+/*
* FILENAME: asm_init.s
*
* Originator: Alex Bounine
@@ -29,7 +29,7 @@
* DESCRIPTION:
* Initialization code for the Tundra Tsi108 bridge chip
*
- *---------------------------------------------------------------------------*/
+ */
#include <config.h>
#include <version.h>
@@ -40,15 +40,15 @@
#include <tsi108.h>
-/*===========================================================================
+/*
* Build Configuration Options
*/
-/* #define DISABLE_PBM disables usage of PB Master */
-/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */
-/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */
+/* #define DISABLE_PBM disables usage of PB Master */
+/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */
+/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */
-/* ===========================================================================
+/*
* Hardcoded SDC settings
*/
@@ -56,571 +56,543 @@
/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */
-#define VAL_SD_REFRESH (0x61A)
-#define VAL_SD_TIMING (0x0308336b)
-#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */
-#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */
-#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */
-#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */
+#define VAL_SD_REFRESH (0x61A)
+#define VAL_SD_TIMING (0x0308336b)
+#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */
+#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */
+#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */
#endif /* SDC_HARDCODED_INIT */
-/*---------------------------------------------------------------------------
+/*
CPU Configuration:
CPU Address and Data Parity enables.
#define CPU_AP
#define CPU_DP
+*/
-===========================================================================
- Macros
-
- !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
- expected to work correctly for the CSR space within 32KB range.
-
- LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
- These macros are absolutely identical except their names. This difference
- is provided intentionally for better readable code.
- -------------------------------------------------------------------------*/
+/*
+ * Macros
+ * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
+ * expected to work correctly for the CSR space within 32KB range.
+ *
+ * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
+ * These macros are absolutely identical except their names. This difference
+ * is provided intentionally for better readable code.
+ */
#define LOAD_PTR(reg,const32) \
- addis reg,r0,const32@h; ori reg,reg,const32@l
+ addis reg,r0,const32@h; ori reg,reg,const32@l
#define LOAD_U32(reg,const32) \
- addis reg,r0,const32@h; ori reg,reg,const32@l
+ addis reg,r0,const32@h; ori reg,reg,const32@l
-/* LOADMEM initializes a register with the contents of a specified 32-bit memory
- location, usually a CSR value.*/
+/* LOADMEM initializes a register with the contents of a specified 32-bit
+ * memory location, usually a CSR value.
+ */
#define LOAD_MEM(reg,addr32) \
- addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
+ addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
#ifndef SDC_HARDCODED_INIT
sdc_clk_sync:
/* MHz: 0,0,183,100,133,167,200,233 */
- .long 0,0, 6, 10, 8, 6, 5, 4 /* nSec */
+ .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */
#endif
-/*===========================================================================
- board_asm_init() - early initialization function. Coded to be portable to
- dual-CPU configuration.
- Checks CPU number and performs board HW initialization if called for CPU0.
-
- Registers used: r3,r4,r5,r6,r19,r29
-===========================================================================
-
----------------------------------------------------------------------------
- NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
- and the rest of the board. Current implementation demonstrates two
- possible ways to identify CPU number:
- - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
- - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
----------------------------------------------------------------------------*/
+/*
+ * board_asm_init() - early initialization function. Coded to be portable to
+ * dual-CPU configuration.
+ * Checks CPU number and performs board HW initialization if called for CPU0.
+ * Registers used: r3,r4,r5,r6,r19,r29
+ *
+ * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
+ * and the rest of the board. Current implementation demonstrates two
+ * possible ways to identify CPU number:
+ * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
+ * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
+ */
- .globl board_asm_init
+ .globl board_asm_init
board_asm_init:
+ mflr r19 /* Save LR to be able return later. */
+ bl icache_enable /* Enable icache to reduce reads from flash. */
- mflr r19 /* Save LR to be able return later. */
-
- bl icache_enable /* Enable icache to reduce reads from flash. */
+/* Initialize pointer to Tsi108 register space */
- /* Initialize pointer to Tsi108 register space
- -------------------------------------------------------------------------*/
+ LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+ ori r4,r29,TSI108_PB_REG_OFFSET
- LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
- ori r4,r29,TSI108_PB_REG_OFFSET
+/* Check Processor Version Number */
- /*-------------------------------------------------------------------------
- Check Processor Version Number */
+ mfspr r3, PVR
+ rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */
- mfspr r3, PVR
- rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */
+ cmpli 0,0,r3,0x8000 /* MPC74xx */
+ bne cont_brd_init
- cmpli 0,0,r3,0x8000 /* MPC74xx */
- bne cont_brd_init
-
- /* ------------------------------------------
- For MPC744x/5x enable extended BATs[4-7]
- Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
- to disable prefetch
- */
-
- mfspr r5, HID0
- oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */
- ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */
- mtspr HID0, r5
- isync
- sync
+ /*
+ * For MPC744x/5x enable extended BATs[4-7]
+ * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
+ * to disable prefetch
+ */
- /* Adding code to disable external interventions in MPX bus mode */
- mfspr r3, 1014
- oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */
- mtspr 1014, r3
- isync
- sync
+ mfspr r5, HID0
+ oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */
+ ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */
+ mtspr HID0, r5
+ isync
+ sync
- /* Sri: code to enable FP unit */
- mfmsr r3
- ori r3, r3, 0x2000
- mtmsr r3
- isync
- sync
+ /* Adding code to disable external interventions in MPX bus mode */
+ mfspr r3, 1014
+ oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */
+ mtspr 1014, r3
+ isync
+ sync
-#if(1) /* def CONFIG_DUAL_CPU
- -------------------------------------------------------------------------
- For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
- */
+ /* Sri: code to enable FP unit */
+ mfmsr r3
+ ori r3, r3, 0x2000
+ mtmsr r3
+ isync
+ sync
- mfspr r3,1014 /* read MSSCR0 */
- rlwinm. r3,r3,27,31,31 /* get processor ID number */
- mtspr SPRN_PIR,r3 /* Save CPU ID */
- sync
- bne init_done
- b do_tsi108_init
+ /* def CONFIG_DUAL_CPU
+ * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
+ */
+#if(1)
+ mfspr r3,1014 /* read MSSCR0 */
+ rlwinm. r3,r3,27,31,31 /* get processor ID number */
+ mtspr SPRN_PIR,r3 /* Save CPU ID */
+ sync
+ bne init_done
+ b do_tsi108_init
cont_brd_init:
- /* An alternative method of checking the processor number (in addition
- to configuration using MSSCR0[ID] bit on MPC74xx).
- Good for IBM PPC750FX/GX.
- */
-
- lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */
- rlwinm. r3,r3,24,31,31 /* get processor ID number */
-
- bne init_done
+ /* An alternative method of checking the processor number (in addition
+ * to configuration using MSSCR0[ID] bit on MPC74xx).
+ * Good for IBM PPC750FX/GX.
+ */
+ lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */
+ rlwinm. r3,r3,24,31,31 /* get processor ID number */
+ bne init_done
#else
cont_brd_init:
#endif /* CONFIG_DUAL_CPU */
- /* Initialize Tsi108 chip
- ---------------------------------------------------------------------------
- */
+ /* Initialize Tsi108 chip */
do_tsi108_init:
- /*--------------------------------------------------------------------------
- Adjust HLP/Flash parameters. By default after reset the HLP port is set
- to support slow devices. Better performance can be achived when an optimal
- parameters are used for specific EPROM device.
- NOTE: This should be performed ASAP for the emulation platform because
- it has 5MHz HLP clocking.
- */
+ /*
+ * Adjust HLP/Flash parameters. By default after reset the HLP port is
+ * set to support slow devices. Better performance can be achived when
+ * an optimal parameters are used for specific EPROM device.
+ * NOTE: This should be performed ASAP for the emulation platform
+ * because it has 5MHz HLP clocking.
+ */
#ifdef CONFIG_TSI108EMU
- ori r4,r29,TSI108_HLP_REG_OFFSET
- LOAD_U32(r5,0x434422c0)
- stw r5,0x08(r4) /* set HLP B0_CTRL0 */
- sync
- LOAD_U32(r5,0xd0012000)
- stw r5,0x0c(r4) /* set HLP B0_CTRL1 */
- sync
+ ori r4,r29,TSI108_HLP_REG_OFFSET
+ LOAD_U32(r5,0x434422c0)
+ stw r5,0x08(r4) /* set HLP B0_CTRL0 */
+ sync
+ LOAD_U32(r5,0xd0012000)
+ stw r5,0x0c(r4) /* set HLP B0_CTRL1 */
+ sync
#endif
- /* -------------------------------------------------------------------------
- * Initialize PB interface.
- */
+ /* Initialize PB interface. */
- ori r4,r29,TSI108_PB_REG_OFFSET
+ ori r4,r29,TSI108_PB_REG_OFFSET
#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
- /* Relocate (if required) Tsi108 registers. Set new value for PB_REG_BAR:
- * Note we are in the 32-bit address mode.
- */
- LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* value for PB_REG_BAR: BA + EN*/
- stw r5,PB_REG_BAR(r4)
- andis. r29,r5,0xFFFF
- sync
-
- ori r4,r29,TSI108_PB_REG_OFFSET
+ /* Relocate (if required) Tsi108 registers. Set new value for
+ * PB_REG_BAR:
+ * Note we are in the 32-bit address mode.
+ */
+ LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+ stw r5,PB_REG_BAR(r4)
+ andis. r29,r5,0xFFFF
+ sync
+ ori r4,r29,TSI108_PB_REG_OFFSET
#endif
- /* Set PB Slave configuration register */
+ /* Set PB Slave configuration register */
-/* LOAD_U32(r5,0x000024C7) value for PB_SCR: TEA enabled,AACK delay = 7 */
- LOAD_U32(r5,0x00002481) /* value for PB_SCR: TEA enabled,AACK delay = 1 */
- lwz r3, PB_RSR(r4) /* get PB bus mode */
- xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
- rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */
- stw r5,PB_SCR(r4)
- sync
+ LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */
+ lwz r3, PB_RSR(r4) /* get PB bus mode */
+ xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
+ rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */
+ stw r5,PB_SCR(r4)
+ sync
- /* Configure PB Arbiter */
+ /* Configure PB Arbiter */
- lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
- li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */
+ lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */
#ifdef DISABLE_PBM
- ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */
+ ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */
#endif
- andc r5,r5,r3 /* Clear the masked bit fields */
-/* ori r5,r5,0x0040 Set pipeline depth 4
- ori r5,r5,0x0080 Set pipeline depth 8
- ori r5,r5,0x0020 !!!avb Testing: set pipeline depth 2 */
- ori r5,r5,0x0001
- stw r5,PB_ARB_CTRL(r4)
-
-#if (0) /* currently using the default settings for PBM after reset */
- LOAD_U32(r5,0x) /* value for PB_MCR */
- stw r5,PB_MCR(r4)
- sync
-
- LOAD_U32(r5,0x) /* value for PB_MCMD */
- stw r5,PB_MCMD(r4)
- sync
+ andc r5,r5,r3 /* Clear the masked bit fields */
+ ori r5,r5,0x0001 /* Set pipeline depth */
+ stw r5,PB_ARB_CTRL(r4)
+
+#if (0) /* currently using the default settings for PBM after reset */
+ LOAD_U32(r5,0x) /* value for PB_MCR */
+ stw r5,PB_MCR(r4)
+ sync
+
+ LOAD_U32(r5,0x) /* value for PB_MCMD */
+ stw r5,PB_MCMD(r4)
+ sync
#endif
-/* Disable or enable PVT based on processor bus frequency
- 1. Read CG_PWRUP_STATUS register field bits 18,17,16
- 2. See if the value is < or > 133mhz (18:16 = 100)
- 3. If > enable PVT
- */
+ /* Disable or enable PVT based on processor bus frequency
+ * 1. Read CG_PWRUP_STATUS register field bits 18,17,16
+ * 2. See if the value is < or > 133mhz (18:16 = 100)
+ * 3. If > enable PVT
+ */
- LOAD_U32(r3,0xC0002234)
- lwz r3,0(r3)
- rlwinm r3,r3,16,29,31
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,16,29,31
- cmpi 0,0,r3,0x0004
- bgt sdc_init
+ cmpi 0,0,r3,0x0004
+ bgt sdc_init
#ifndef CONFIG_TSI108EMU
- /* FIXME: Disable PB calibration control for any real Tsi108 board */
- li r5,0x0101 /* disable calibration control */
- stw r5,PB_PVT_CTRL2(r4)
- sync
+ /* FIXME: Disable PB calibration control for any real Tsi108 board */
+ li r5,0x0101 /* disable calibration control */
+ stw r5,PB_PVT_CTRL2(r4)
+ sync
#endif
-/*---------------------------------------------------------------------------
- Initialize SDRAM controller.
-----------------------------------------------------------------------------*/
+ /* Initialize SDRAM controller. */
sdc_init:
#ifndef SDC_HARDCODED_INIT
- /* get SDC clock prior doing sdram controller autoconfig */
- ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */
- lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */
- rlwinm r3,r3,12,29,31 /* r3 - SD clk */
- lis r5,sdc_clk_sync@h
- ori r5,r5,sdc_clk_sync@l
- /* Sri: At this point check if r3 = 001. If yes,
- * the memory frequency should be same as the
- * MPX bus frequency
- */
- cmpi 0,0,r3,0x0001
- bne get_nsec
- lwz r6, CG_PWRUP_STATUS(r4)
- rlwinm r6,r6,16,29,31
- mr r3,r6
+ /* get SDC clock prior doing sdram controller autoconfig */
+ ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */
+ lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */
+ rlwinm r3,r3,12,29,31 /* r3 - SD clk */
+ lis r5,sdc_clk_sync@h
+ ori r5,r5,sdc_clk_sync@l
+ /* Sri: At this point check if r3 = 001. If yes,
+ * the memory frequency should be same as the
+ * MPX bus frequency
+ */
+ cmpi 0,0,r3,0x0001
+ bne get_nsec
+ lwz r6, CG_PWRUP_STATUS(r4)
+ rlwinm r6,r6,16,29,31
+ mr r3,r6
get_nsec:
- rlwinm r3,r3,2,0,31
- lwzx r9,r5,r3 /* get SD clk rate in nSec */
- /* ATTN: r9 will be used by SPD routine */
+ rlwinm r3,r3,2,0,31
+ lwzx r9,r5,r3 /* get SD clk rate in nSec */
+ /* ATTN: r9 will be used by SPD routine */
#endif /* !SDC_HARDCODED_INIT */
- ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
+ ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
- /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
+ /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
- LOAD_U32(r5,0x00)
- stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
+ LOAD_U32(r5,0x00)
+ stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
#ifdef ENABLE_SDRAM_ECC
- li r5, 0x01
+ li r5, 0x01
#endif /* ENABLE_SDRAM_ECC */
- stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */
- sync
+ stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */
+ sync
#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */
- /* First read the CG_PWRUP_STATUS register to get the
- memory speed from bits 22,21,20 */
-
- LOAD_U32(r3,0xC0002234)
- lwz r3,0(r3)
- rlwinm r3,r3,12,29,31
+ /* First read the CG_PWRUP_STATUS register to get the
+ * memory speed from bits 22,21,20
+ */
- /* Now first check for 166, then 200, or default */
+ LOAD_U32(r3,0xC0002234)
+ lwz r3,0(r3)
+ rlwinm r3,r3,12,29,31
- cmpi 0,0,r3,0x0005
- bne check_for_200mhz
+ /* Now first check for 166, then 200, or default */
- /* set values for 166 Mhz memory speed */
+ cmpi 0,0,r3,0x0005
+ bne check_for_200mhz
- /* Set refresh rate and timing parameters */
- LOAD_U32(r5,0x00000515)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,0x03073368)
- stw r5,SD_TIMING(r4)
- sync
+ /* set values for 166 Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x00000515)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03073368)
+ stw r5,SD_TIMING(r4)
+ sync
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
- b sdc_init_done
+ b sdc_init_done
check_for_200mhz:
- cmpi 0,0,r3,0x0006
- bne set_default_values
+ cmpi 0,0,r3,0x0006
+ bne set_default_values
- /* set values for 200Mhz memory speed */
-
- /* Set refresh rate and timing parameters */
- LOAD_U32(r5,0x0000061a)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,0x03083348)
- stw r5,SD_TIMING(r4)
- sync
+ /* set values for 200Mhz memory speed
+ * Set refresh rate and timing parameters
+ */
+ LOAD_U32(r5,0x0000061a)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,0x03083348)
+ stw r5,SD_TIMING(r4)
+ sync
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
- b sdc_init_done
+ b sdc_init_done
set_default_values:
- /* Set refresh rate and timing parameters */
- LOAD_U32(r5,VAL_SD_REFRESH)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,VAL_SD_TIMING)
- stw r5,SD_TIMING(r4)
- sync
+ /* Set refresh rate and timing parameters */
+ LOAD_U32(r5,VAL_SD_REFRESH)
+ stw r5,SD_REFRESH(r4)
+ LOAD_U32(r5,VAL_SD_TIMING)
+ stw r5,SD_TIMING(r4)
+ sync
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
+ /* Initialize DIMM0 control and BAR registers */
+ LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
+ stw r5,SD_D0_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D0_BAR)
+ stw r5,SD_D0_BAR(r4)
+ sync
+
+ /* Initialize DIMM1 control and BAR registers
+ * (same as dimm 0, next 512MB, disabled)
+ */
+ LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
+ oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
-
+ stw r5,SD_D1_CTRL(r4)
+ LOAD_U32(r5,VAL_SD_D1_BAR)
+ stw r5,SD_D1_BAR(r4)
+ sync
#else /* !SDC_HARDCODED_INIT */
-
- bl tsi108_sdram_spd /* automatically detect SDC settings */
-
+ bl tsi108_sdram_spd /* automatically detect SDC settings */
#endif /* SDC_HARDCODED_INIT */
sdc_init_done:
#ifdef DISABLE_PBM
- LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */
+ LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */
#else
- LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */
+ LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */
#endif /* DISABLE_PBM */
#ifdef CONFIG_TSI108EMU
- oris r5,r5,0x0010 /* set EMULATION_MODE bit */
+ oris r5,r5,0x0010 /* set EMULATION_MODE bit */
#endif
- stw r5,SD_CTRL(r4)
- eieio
- sync
+ stw r5,SD_CTRL(r4)
+ eieio
+ sync
- /* Enable SDRAM access */
+ /* Enable SDRAM access */
- oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */
- stw r5,SD_CTRL(r4)
- sync
+ oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */
+ stw r5,SD_CTRL(r4)
+ sync
wait_init_complete:
- lwz r5,SD_STATUS(r4)
- andi. r5,r5,0x0001
- beq wait_init_complete /* wait until SDRAM initialization is complete */
-
-/*---------------------------------------------------------------------------
- Map SDRAM into the processor bus address space
----------------------------------------------------------------------------*/
+ lwz r5,SD_STATUS(r4)
+ andi. r5,r5,0x0001
+ /* wait until SDRAM initialization is complete */
+ beq wait_init_complete
- ori r4,r29,TSI108_PB_REG_OFFSET
+ /* Map SDRAM into the processor bus address space */
- /* Setup BARs associated with direct path PB<->SDRAM */
+ ori r4,r29,TSI108_PB_REG_OFFSET
- /* PB_SDRAM_BAR1:
- provides a direct path to the main system memory (cacheable SDRAM) */
+ /* Setup BARs associated with direct path PB<->SDRAM */
- LOAD_U32(r5, 0x00000011) /* BA=0,Size=512MB, ENable, No Addr.Translation */
- stw r5,PB_SDRAM_BAR1(r4)
- sync
+ /* PB_SDRAM_BAR1:
+ * provides a direct path to the main system memory (cacheable SDRAM)
+ */
- /* Make sure that PB_SDRAM_BAR1 decoder is set
- (to allow following immediate read from SDRAM) */
- lwz r5,PB_SDRAM_BAR1(r4)
- sync
+ /* BA=0,Size=512MB, ENable, No Addr.Translation */
+ LOAD_U32(r5, 0x00000011)
+ stw r5,PB_SDRAM_BAR1(r4)
+ sync
- /* PB_SDRAM_BAR2:
- provides non-cacheable alias (via the direct path) to main system memory.
- Size = 512MB, ENable, Addr.Translation - ON,
- BA = 0x0_40000000, TA = 0x0_00000000 */
+ /* Make sure that PB_SDRAM_BAR1 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR1(r4)
+ sync
- LOAD_U32(r5, 0x40010011)
- stw r5,PB_SDRAM_BAR2(r4)
- sync
+ /* PB_SDRAM_BAR2:
+ * provides non-cacheable alias (via the direct path) to main
+ * system memory.
+ * Size = 512MB, ENable, Addr.Translation - ON,
+ * BA = 0x0_40000000, TA = 0x0_00000000
+ */
- /* Make sure that PB_SDRAM_BAR2 decoder is set
- (to allow following immediate read from SDRAM) */
- lwz r5,PB_SDRAM_BAR2(r4)
- sync
+ LOAD_U32(r5, 0x40010011)
+ stw r5,PB_SDRAM_BAR2(r4)
+ sync
+ /* Make sure that PB_SDRAM_BAR2 decoder is set
+ * (to allow following immediate read from SDRAM)
+ */
+ lwz r5,PB_SDRAM_BAR2(r4)
+ sync
init_done:
- /* All done. Restore LR and return. */
- mtlr r19
- blr
+ /* All done. Restore LR and return. */
+ mtlr r19
+ blr
#if (0)
-/*===========================================================================
- init_cpu1
-
- This routine enables CPU1 on the dual-processor system.
-===========================================================================*/
+ /*
+ * init_cpu1
+ * This routine enables CPU1 on the dual-processor system.
+ * Now there is only one processor in the system
+ */
- .global enable_cpu1
+ .global enable_cpu1
enable_cpu1:
- lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */
- addi r3,r3,Tsi108_Base@l
- lwz r3,0(r3) /* R3 = CSR Base Addr */
- ori r4,r3,TSI108_PB_REG_OFFSET
- lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
- ori r3,r3,0x0200 /* Set M1_EN bit */
- stw r3,PB_ARB_CTRL(r4)
+ lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */
+ addi r3,r3,Tsi108_Base@l
+ lwz r3,0(r3) /* R3 = CSR Base Addr */
+ ori r4,r3,TSI108_PB_REG_OFFSET
+ lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
+ ori r3,r3,0x0200 /* Set M1_EN bit */
+ stw r3,PB_ARB_CTRL(r4)
- blr
+ blr
#endif
-/*===========================================================================
- enable_EI
-
- Enable CPU core external interrupt
-===========================================================================*/
+ /*
+ * enable_EI
+ * Enable CPU core external interrupt
+ */
- .global enable_EI
+ .global enable_EI
enable_EI:
- mfmsr r3
- ori r3,r3,0x8000 /* set EE bit */
- mtmsr r3
- blr
-
-/*===========================================================================
- disable_EI
+ mfmsr r3
+ ori r3,r3,0x8000 /* set EE bit */
+ mtmsr r3
+ blr
- Disable CPU core external interrupt
-===========================================================================*/
+ /*
+ * disable_EI
+ * Disable CPU core external interrupt
+ */
- .global disable_EI
+ .global disable_EI
disable_EI:
- mfmsr r3
- li r4,-32768 /* aka "li r4,0x8000" */
- andc r3,r3,r4 /* clear EE bit */
- mtmsr r3
- blr
+ mfmsr r3
+ li r4,-32768 /* aka "li r4,0x8000" */
+ andc r3,r3,r4 /* clear EE bit */
+ mtmsr r3
+ blr
#ifdef ENABLE_SDRAM_ECC
-/*===========================================================================
- enable_ECC
+ /* enables SDRAM ECC */
- enables SDRAM ECC
-===========================================================================*/
-
- .global enable_ECC
+ .global enable_ECC
enable_ECC:
- ori r4,r29,TSI108_SD_REG_OFFSET
- lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */
- ori r3,r3,0x0001 /* Set ECC_EN bit */
- stw r3,SD_ECC_CTRL(r4)
- blr
-
-/*===========================================================================
- clear_ECC_err
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */
+ ori r3,r3,0x0001 /* Set ECC_EN bit */
+ stw r3,SD_ECC_CTRL(r4)
+ blr
- Clears all pending SDRAM ECC errors
- (normally after SDRAM scrubbing/initialization)
-===========================================================================*/
+ /*
+ * clear_ECC_err
+ * Clears all pending SDRAM ECC errors
+ * (normally after SDRAM scrubbing/initialization)
+ */
- .global clear_ECC_err
+ .global clear_ECC_err
clear_ECC_err:
- ori r4,r29,TSI108_SD_REG_OFFSET
-/* lwz r3,SD_INT_STATUS(r4) Read SDRAM ECC Control Register */
- ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */
- stw r3,SD_INT_STATUS(r4)
- blr
+ ori r4,r29,TSI108_SD_REG_OFFSET
+ ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */
+ stw r3,SD_INT_STATUS(r4)
+ blr
#endif /* ENABLE_SDRAM_ECC */
#ifndef SDC_HARDCODED_INIT
-/********************************************************************
- * SDRAM SPD Support
- */
-
+ /* SDRAM SPD Support */
#define SD_I2C_CTRL1 (0x400)
#define SD_I2C_CTRL2 (0x404)
#define SD_I2C_RD_DATA (0x408)
-#define SD_I2C_WR_DATA (0x40C)
+#define SD_I2C_WR_DATA (0x40C)
-/*
- * SDRAM SPD Support Macros
- */
+ /*
+ * SDRAM SPD Support Macros
+ */
#define SPD_DIMM0 (0x00000100)
-#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */
+#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */
#define SPD_RDIMM (0x01)
#define SPD_UDIMM (0x02)
@@ -651,30 +623,30 @@ clear_ECC_err:
* r10 - number of DDR slot where first SPD device is detected
*/
-#define READ_SPD(byte_num) \
- addis r3, 0, byte_num@l;\
- or r3, r3, r10;\
- ori r3, r3, 0x0A;\
- stw r3, SD_I2C_CTRL1(r4);\
- li r3, I2C_CNTRL2_START;\
- stw r3, SD_I2C_CTRL2(r4);\
- eieio;\
- sync;\
- li r3, 0x100;\
-1: ;\
- addic. r3, r3, -1;\
- bne 1b;\
-2: ;\
- lwz r5, SD_I2C_CTRL2(r4);\
- rlwinm. r3,r5,0,23,23;\
- bne 2b;\
- rlwinm. r3,r5,0,3,3;\
- lwz r3, SD_I2C_RD_DATA(r4)
+#define READ_SPD(byte_num) \
+ addis r3, 0, byte_num@l; \
+ or r3, r3, r10; \
+ ori r3, r3, 0x0A; \
+ stw r3, SD_I2C_CTRL1(r4); \
+ li r3, I2C_CNTRL2_START; \
+ stw r3, SD_I2C_CTRL2(r4); \
+ eieio; \
+ sync; \
+ li r3, 0x100; \
+1:; \
+ addic. r3, r3, -1; \
+ bne 1b; \
+2:; \
+ lwz r5, SD_I2C_CTRL2(r4); \
+ rlwinm. r3,r5,0,23,23; \
+ bne 2b; \
+ rlwinm. r3,r5,0,3,3; \
+ lwz r3,SD_I2C_RD_DATA(r4)
#define SPD_MIN_RFRSH (0x80)
#define SPD_MAX_RFRSH (0x85)
-refresh_rates: /* in nSec */
+refresh_rates: /* in nSec */
.long 15625 /* Normal (0x80) */
.long 3900 /* Reduced 0.25x (0x81) */
.long 7800 /* Reduced 0.5x (0x82) */
@@ -682,274 +654,265 @@ refresh_rates: /* in nSec */
.long 62500 /* Extended 4x (0x84) */
.long 125000 /* Extended 8x (0x85) */
-/*===========================================================================
+/*
* tsi108_sdram_spd
*
* Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data
* Uses registers: r4 - SDC base address (not changed)
* r9 - SDC clocking period in nSec
* Changes registers: r3,r5,r6,r7,r8,r10,r11
- *==========================================================================*/
+ */
tsi108_sdram_spd:
- li r10,SPD_DIMM0
+ li r10,SPD_DIMM0
xor r11,r11,r11 /* DIMM Base Address: starts from 0 */
do_first_dimm:
- /**************************************
- * Program Refresh Rate Register
- */
+ /* Program Refresh Rate Register */
+
+ READ_SPD(12) /* get Refresh Rate */
+ beq check_next_slot
+ li r5, ERR_RFRSH_RATE
+ cmpi 0,0,r3,SPD_MIN_RFRSH
+ ble spd_fail
+ cmpi 0,0,r3,SPD_MAX_RFRSH
+ bgt spd_fail
+ addi r3,r3,-SPD_MIN_RFRSH
+ rlwinm r3,r3,2,0,31
+ lis r5,refresh_rates@h
+ ori r5,r5,refresh_rates@l
+ lwzx r5,r5,r3 /* get refresh rate in nSec */
+ divwu r5,r5,r9 /* calculate # of SDC clocks */
+ stw r5,SD_REFRESH(r4) /* Set refresh rate */
+ sync
- READ_SPD(12) /* get Refresh Rate */
- beq check_next_slot
- li r5, ERR_RFRSH_RATE
- cmpi 0,0,r3,SPD_MIN_RFRSH
- ble spd_fail
- cmpi 0,0,r3,SPD_MAX_RFRSH
- bgt spd_fail
- addi r3,r3,-SPD_MIN_RFRSH
- rlwinm r3,r3,2,0,31
- lis r5,refresh_rates@h
- ori r5,r5,refresh_rates@l
- lwzx r5,r5,r3 /* get refresh rate in nSec */
- divwu r5,r5,r9 /* calculate # of SDC clocks */
- stw r5,SD_REFRESH(r4) /* Set refresh rate */
- sync
-
- /**************************************
- * Program SD Timing Register
- */
+ /* Program SD Timing Register */
- li r7, 0 /* clear r7 prior parameter collection */
+ li r7, 0 /* clear r7 prior parameter collection */
- READ_SPD(20) /* get DIMM type: Registered or Unbuffered */
+ READ_SPD(20) /* get DIMM type: Registered or Unbuffered */
beq spd_read_fail
- li r5, ERR_DIMM_TYPE
- cmpi 0,0,r3,SPD_UDIMM
- beq do_cl
- cmpi 0,0,r3,SPD_RDIMM
- bne spd_fail
- oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */
+ li r5, ERR_DIMM_TYPE
+ cmpi 0,0,r3,SPD_UDIMM
+ beq do_cl
+ cmpi 0,0,r3,SPD_RDIMM
+ bne spd_fail
+ oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */
do_cl:
- READ_SPD(18) /* Get CAS Latency */
+ READ_SPD(18) /* Get CAS Latency */
beq spd_read_fail
- li r5,ERR_CL_VALUE
- andi. r6,r3,SPD_CAS_3
- beq cl_4
- li r6,3
- b set_cl
+ li r5,ERR_CL_VALUE
+ andi. r6,r3,SPD_CAS_3
+ beq cl_4
+ li r6,3
+ b set_cl
cl_4:
- andi. r6,r3,SPD_CAS_4
- beq cl_5
- li r6,4
- b set_cl
+ andi. r6,r3,SPD_CAS_4
+ beq cl_5
+ li r6,4
+ b set_cl
cl_5:
- andi. r6,r3,SPD_CAS_5
- beq spd_fail
- li r6,5
+ andi. r6,r3,SPD_CAS_5
+ beq spd_fail
+ li r6,5
set_cl:
- rlwimi r7,r6,24,5,7
+ rlwimi r7,r6,24,5,7
- READ_SPD(30) /* Get tRAS */
+ READ_SPD(30) /* Get tRAS */
beq spd_read_fail
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
beq set_tras
- addi r6,r6,1
+ addi r6,r6,1
set_tras:
li r5,ERR_TRAS_FAIL
- cmpi 0,0,r6,0x0F /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,16,12,15
+ cmpi 0,0,r6,0x0F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,16,12,15
READ_SPD(29) /* Get tRCD */
beq spd_read_fail
- rlwinm r3,r3,30,2,31/* right shift tRCD by 2 bits as per DDR2 spec */
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
+ /* right shift tRCD by 2 bits as per DDR2 spec */
+ rlwinm r3,r3,30,2,31
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
beq set_trcd
- addi r6,r6,1
+ addi r6,r6,1
set_trcd:
- li r5,ERR_TRCD_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,12,17,19
+ li r5,ERR_TRCD_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,12,17,19
READ_SPD(27) /* Get tRP value */
beq spd_read_fail
- rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
+ rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
beq set_trp
- addi r6,r6,1
+ addi r6,r6,1
set_trp:
- li r5,ERR_TRP_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,8,21,23
+ li r5,ERR_TRP_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,8,21,23
READ_SPD(36) /* Get tWR value */
beq spd_read_fail
- rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
+ rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
beq set_twr
- addi r6,r6,1
+ addi r6,r6,1
set_twr:
- addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */
- li r5,ERR_TWR_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,5,24,26
+ addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */
+ li r5,ERR_TWR_FAIL
+ cmpi 0,0,r6,0x07 /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,5,24,26
READ_SPD(42) /* Get tRFC */
beq spd_read_fail
- li r5, ERR_TRFC_FAIL
+ li r5, ERR_TRFC_FAIL
/* Tsi108 spec: tRFC=(tRFC + 1)/2 */
- addi r3,r3,1
- rlwinm. r3,r3,31,1,31 /* divide by 2 */
- beq spd_fail
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
+ addi r3,r3,1
+ rlwinm. r3,r3,31,1,31 /* divide by 2 */
+ beq spd_fail
+ divwu r6,r3,r9
+ mullw r8,r6,r9
+ subf. r8,r8,r3
beq set_trfc
- addi r6,r6,1
+ addi r6,r6,1
set_trfc:
- cmpi 0,0,r6,0x1F /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,0,27,31
+ cmpi 0,0,r6,0x1F /* max supported value */
+ bgt spd_fail
+ rlwimi r7,r6,0,27,31
stw r7,SD_TIMING(r4)
sync
- /*=====================================================================
+ /*
* The following two registers are set on per-DIMM basis.
* The SD_REFRESH and SD_TIMING settings are common for both DIMMS
- *=====================================================================
*/
do_each_dimm:
- /*****************************************
- * Program SDRAM DIMM Control Register
- */
+ /* Program SDRAM DIMM Control Register */
- li r7, 0 /* clear r7 prior parameter collection */
+ li r7, 0 /* clear r7 prior parameter collection */
READ_SPD(13) /* Get Primary SDRAM Width */
beq spd_read_fail
- cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */
- beq do_nbank
- oris r7,r7,0x0010 /* Set MEM_WIDTH bit */
+ cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */
+ beq do_nbank
+ oris r7,r7,0x0010 /* Set MEM_WIDTH bit */
do_nbank:
READ_SPD(17) /* Get Number of banks on SDRAM device */
beq spd_read_fail
/* Grendel only distinguish betw. 4 or 8-bank memory parts */
- li r5,ERR_UNKNOWN_PART /* non-supported memory part */
- cmpi 0,0,r3,4
- beq do_nrank
- cmpi 0,0,r3,8
- bne spd_fail
- ori r7,r7,0x1000
+ li r5,ERR_UNKNOWN_PART /* non-supported memory part */
+ cmpi 0,0,r3,4
+ beq do_nrank
+ cmpi 0,0,r3,8
+ bne spd_fail
+ ori r7,r7,0x1000
do_nrank:
- READ_SPD(5) /* Get # of Ranks */
+ READ_SPD(5) /* Get # of Ranks */
beq spd_read_fail
- li r5,ERR_NRANK_INVALID
- andi. r6,r3,0x7 /* Use bits [2..0] only */
- beq do_addr_mode
- cmpi 0,0,r6,1
- bgt spd_fail
- rlwimi r7,r6,8,23,23
+ li r5,ERR_NRANK_INVALID
+ andi. r6,r3,0x7 /* Use bits [2..0] only */
+ beq do_addr_mode
+ cmpi 0,0,r6,1
+ bgt spd_fail
+ rlwimi r7,r6,8,23,23
do_addr_mode:
- READ_SPD(4) /* Get # of Column Addresses */
+ READ_SPD(4) /* Get # of Column Addresses */
beq spd_read_fail
- li r5, ERR_ADDR_MODE
- andi. r3,r3,0x0f /* cut off reserved bits */
- cmpi 0,0,r3,8
- ble spd_fail
- cmpi 0,0,r3,15
- bgt spd_fail
- addi r6,r3,-8 /* calculate ADDR_MODE parameter */
- rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */
+ li r5, ERR_ADDR_MODE
+ andi. r3,r3,0x0f /* cut off reserved bits */
+ cmpi 0,0,r3,8
+ ble spd_fail
+ cmpi 0,0,r3,15
+ bgt spd_fail
+ addi r6,r3,-8 /* calculate ADDR_MODE parameter */
+ rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */
set_dimm_ctrl:
#ifdef SDC_AUTOPRECH_EN
- oris r7,r7,0x0001 /* set auto precharge EN bit */
+ oris r7,r7,0x0001 /* set auto precharge EN bit */
#endif
- ori r7,r7,1 /* set ENABLE bit */
- cmpi 0,0,r10,SPD_DIMM0
- bne 1f
- stw r7,SD_D0_CTRL(r4)
+ ori r7,r7,1 /* set ENABLE bit */
+ cmpi 0,0,r10,SPD_DIMM0
+ bne 1f
+ stw r7,SD_D0_CTRL(r4)
sync
- b set_dimm_bar
+ b set_dimm_bar
1:
- stw r7,SD_D1_CTRL(r4)
+ stw r7,SD_D1_CTRL(r4)
sync
- /********************************************
- * Program SDRAM DIMMx Base Address Register
- */
+ /* Program SDRAM DIMMx Base Address Register */
set_dimm_bar:
READ_SPD(5) /* get # of Ranks */
beq spd_read_fail
- andi.r7,r3,0x7
- addi r7,r7,1
- READ_SPD(31) /* Read DIMM rank density */
+ andi. r7,r3,0x7
+ addi r7,r7,1
+ READ_SPD(31) /* Read DIMM rank density */
beq spd_read_fail
- rlwinm r5,r3,27,29,31
- rlwinm r6,r3,3,24,28
- or r5,r6,r5 /* r5 = Normalized Rank Density byte */
- lis r8, 0x0080 /* 128MB >> 4 */
- mullw r8,r8,r5 /* r8 = (rank_size >> 4) */
- mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */
- neg r7,r8
- rlwinm r7,r7,28,4,31
- or r7,r7,r11 /* set ADDR field */
- rlwinm r8,r8,12,20,31
- add r11,r11,r8 /* set Base Addr for next DIMM */
-
- cmpi 0,0,r10,SPD_DIMM0
- bne set_dimm1_size
- stw r7,SD_D0_BAR(r4)
- sync
- li r10,SPD_DIMM1
+ rlwinm r5,r3,27,29,31
+ rlwinm r6,r3,3,24,28
+ or r5,r6,r5 /* r5 = Normalized Rank Density byte */
+ lis r8, 0x0080 /* 128MB >> 4 */
+ mullw r8,r8,r5 /* r8 = (rank_size >> 4) */
+ mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */
+ neg r7,r8
+ rlwinm r7,r7,28,4,31
+ or r7,r7,r11 /* set ADDR field */
+ rlwinm r8,r8,12,20,31
+ add r11,r11,r8 /* set Base Addr for next DIMM */
+
+ cmpi 0,0,r10,SPD_DIMM0
+ bne set_dimm1_size
+ stw r7,SD_D0_BAR(r4)
+ sync
+ li r10,SPD_DIMM1
READ_SPD(0)
bne do_each_dimm
b spd_done
set_dimm1_size:
- stw r7,SD_D1_BAR(r4)
+ stw r7,SD_D1_BAR(r4)
sync
spd_done:
blr
check_next_slot:
- cmpi 0,0,r10,SPD_DIMM1
- beq spd_read_fail
- li r10,SPD_DIMM1
- b do_first_dimm
+ cmpi 0,0,r10,SPD_DIMM1
+ beq spd_read_fail
+ li r10,SPD_DIMM1
+ b do_first_dimm
spd_read_fail:
ori r3,r0,0xdead
- b err_hung
+ b err_hung
spd_fail:
li r3,0x0bad
sync
-err_hung: /* hang here for debugging */
- nop
- nop
- b err_hung
+err_hung: /* hang here for debugging */
+ nop
+ nop
+ b err_hung
#endif /* !SDC_HARDCODED_INIT */
-
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
index f90a751..4d221e7 100644
--- a/board/mpc7448hpc2/mpc7448hpc2.c
+++ b/board/mpc7448hpc2/mpc7448hpc2.c
@@ -25,7 +25,7 @@
*/
/*
- * board support/init functions for the
+ * board support/init functions for the
* Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
*/
@@ -33,39 +33,38 @@
#include <74xx_7xx.h>
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
+extern void ft_cpu_setup (void *blob, bd_t *bd);
#endif
#undef DEBUG
-extern void flush_data_cache(void);
-extern void invalidate_l1_instruction_cache(void);
-extern void tsi108_init_f(void);
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+extern void tsi108_init_f (void);
-int display_mem_map(void);
+int display_mem_map (void);
-void after_reloc(ulong dest_addr)
+void after_reloc (ulong dest_addr)
{
DECLARE_GLOBAL_DATA_PTR;
/*
* Jump to the main U-Boot board init code
*/
- board_init_r((gd_t *) gd, dest_addr);
+ board_init_r ((gd_t *) gd, dest_addr);
/* NOTREACHED */
}
/*
* Check Board Identity:
- *
* report board type
*/
-int checkboard(void)
+int checkboard (void)
{
int l_type = 0;
- printf("BOARD: %s\n", CFG_BOARD_NAME);
+ printf ("BOARD: %s\n", CFG_BOARD_NAME);
return (l_type);
}
@@ -75,19 +74,19 @@ int checkboard(void)
* report calling processor number
*/
-int read_pid(void)
+int read_pid (void)
{
return 0; /* we are on single CPU platform for a while */
}
-long int dram_size(int board_type)
+long int dram_size (int board_type)
{
return 0x20000000; /* 256M bytes */
}
-long int initdram(int board_type)
+long int initdram (int board_type)
{
- return dram_size(board_type);
+ return dram_size (board_type);
}
/* DRAM check routines copied from gw8260 */
@@ -114,11 +113,11 @@ long int initdram(int board_type)
/* May cloober fr0. */
/* */
/*********************************************************************/
-static void move64(unsigned long long *src, unsigned long long *dest)
+static void move64 (unsigned long long *src, unsigned long long *dest)
{
- asm("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
- "stfd 0, 0(4)" /* *dest = fpr0 */
- : : :"fr0"); /* Clobbers fr0 */
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : :"fr0"); /* Clobbers fr0 */
return;
}
@@ -183,28 +182,28 @@ unsigned long long pattern[] = {
/* Assumes only one one SDRAM bank */
/* */
/*********************************************************************/
-int mem_test_data(void)
+int mem_test_data (void)
{
unsigned long long *pmem = (unsigned long long *)CFG_MEMTEST_START;
unsigned long long temp64;
- int num_patterns = sizeof(pattern) / sizeof(pattern[0]);
+ int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
unsigned int hi, lo;
for (i = 0; i < num_patterns; i++) {
- move64(&(pattern[i]), pmem);
- move64(pmem, &temp64);
+ move64 (&(pattern[i]), pmem);
+ move64 (pmem, &temp64);
- /* hi = (temp64>>32) & 0xffffffff; */
- /* lo = temp64 & 0xffffffff; */
- /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf ("\ntemp64 = 0x%08x%08x", hi, lo); */
hi = (pattern[i] >> 32) & 0xffffffff;
lo = pattern[i] & 0xffffffff;
- /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
+ /* printf ("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
if (temp64 != pattern[i]) {
- printf("\n Data Test Failed, pattern 0x%08x%08x",
+ printf ("\n Data Test Failed, pattern 0x%08x%08x",
hi, lo);
return 1;
}
@@ -236,7 +235,7 @@ int mem_test_data(void)
/* */
/* */
/*********************************************************************/
-int mem_test_address(void)
+int mem_test_address (void)
{
volatile unsigned int *pmem =
(volatile unsigned int *)CFG_MEMTEST_START;
@@ -251,13 +250,13 @@ int mem_test_address(void)
/* verify each loaction */
for (i = 0; i < size; i++) {
if (pmem[i] != i) {
- printf("\n Address Test Failed at 0x%x", i);
+ printf ("\n Address Test Failed at 0x%x", i);
return 1;
}
}
return 0;
}
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CFG_DRAM_TEST_ADDRESS */
#if defined (CFG_DRAM_TEST_WALK)
/*********************************************************************/
@@ -287,7 +286,7 @@ int mem_test_address(void)
/* */
/* */
/*********************************************************************/
-int mem_march(volatile unsigned long long *base,
+int mem_march (volatile unsigned long long *base,
unsigned int size,
unsigned long long rmask,
unsigned long long wmask, short read, short write)
@@ -299,14 +298,14 @@ int mem_march(volatile unsigned long long *base,
for (i = 0; i < size; i++) {
if (read != 0) {
/* temp = base[i]; */
- move64((unsigned long long *)&(base[i]), &temp);
+ move64 ((unsigned long long *)&(base[i]), &temp);
if (rmask != temp) {
hitemp = (temp >> 32) & 0xffffffff;
lotemp = temp & 0xffffffff;
himask = (rmask >> 32) & 0xffffffff;
lomask = rmask & 0xffffffff;
- printf("\n Walking one's test failed: \
+ printf ("\n Walking one's test failed: \
address = 0x%08x," "\n\texpected \
0x%08x%08x, found 0x%08x%08x", i << 3,\
himask, lomask, hitemp, lotemp);
@@ -315,12 +314,12 @@ int mem_march(volatile unsigned long long *base,
}
if (write != 0) {
/* base[i] = wmask; */
- move64(&wmask, (unsigned long long *)&(base[i]));
+ move64 (&wmask, (unsigned long long *)&(base[i]));
}
}
return 0;
}
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CFG_DRAM_TEST_WALK */
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
@@ -348,7 +347,7 @@ int mem_march(volatile unsigned long long *base,
/* */
/* */
/*********************************************************************/
-int mem_test_walk(void)
+int mem_test_walk (void)
{
unsigned long long mask;
volatile unsigned long long *pmem =
@@ -359,32 +358,31 @@ int mem_test_walk(void)
mask = 0x01;
- printf("Initial Pass");
- mem_march(pmem, size, 0x0, 0x1, 0, 1);
+ printf ("Initial Pass");
+ mem_march (pmem, size, 0x0, 0x1, 0, 1);
- printf("\b\b\b\b\b\b\b\b\b\b\b\b");
- printf(" ");
- printf(" ");
- printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
for (i = 0; i < 63; i++) {
- printf("Pass %2d", i + 2);
- if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) {
- /*printf("mask: 0x%x, pass: %d, ", mask, i); */
+ printf ("Pass %2d", i + 2);
+ if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0)
+ /*printf ("mask: 0x%x, pass: %d, ", mask, i); */
return 1;
- }
mask = mask << 1;
- printf("\b\b\b\b\b\b\b");
+ printf ("\b\b\b\b\b\b\b");
}
- printf("Last Pass");
+ printf ("Last Pass");
if (mem_march(pmem, size, 0, mask, 0, 1) != 0) {
- /* printf("mask: 0x%x", mask); */
+ /* printf ("mask: 0x%x", mask); */
return 1;
}
- printf("\b\b\b\b\b\b\b\b\b");
- printf(" ");
- printf("\b\b\b\b\b\b\b\b\b");
+ printf ("\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b");
return 0;
}
@@ -412,60 +410,58 @@ int mem_test_walk(void)
/* */
/* */
/*********************************************************************/
-int testdram(void)
+int testdram (void)
{
char *s;
int rundata, runaddress, runwalk;
- s = getenv("testdramdata");
+ s = getenv ("testdramdata");
rundata = (s && (*s == 'y')) ? 1 : 0;
- s = getenv("testdramaddress");
+ s = getenv ("testdramaddress");
runaddress = (s && (*s == 'y')) ? 1 : 0;
- s = getenv("testdramwalk");
+ s = getenv ("testdramwalk");
runwalk = (s && (*s == 'y')) ? 1 : 0;
/* rundata = 1; */
/* runaddress = 0; */
/* runwalk = 0; */
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf("Testing RAM from 0x%08x to 0x%08x ... \
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
+ printf ("Testing RAM from 0x%08x to 0x%08x ... \
(don't panic... that will take a moment !!!!)\n", \
CFG_MEMTEST_START, CFG_MEMTEST_END);
- }
#ifdef CFG_DRAM_TEST_DATA
if (rundata == 1) {
- printf("Test DATA ... ");
+ printf ("Test DATA ... ");
if (mem_test_data () == 1) {
- printf("failed \n");
+ printf ("failed \n");
return 1;
} else
- printf("ok \n");
+ printf ("ok \n");
}
#endif
#ifdef CFG_DRAM_TEST_ADDRESS
if (runaddress == 1) {
- printf("Test ADDRESS ... ");
+ printf ("Test ADDRESS ... ");
if (mem_test_address () == 1) {
- printf("failed \n");
+ printf ("failed \n");
return 1;
} else
- printf("ok \n");
+ printf ("ok \n");
}
#endif
#ifdef CFG_DRAM_TEST_WALK
if (runwalk == 1) {
- printf("Test WALKING ONEs ... ");
- if (mem_test_walk() == 1) {
- printf("failed \n");
+ printf ("Test WALKING ONEs ... ");
+ if (mem_test_walk () == 1) {
+ printf ("failed \n");
return 1;
} else
- printf("ok \n");
+ printf ("ok \n");
}
#endif
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf("passed\n");
- }
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
+ printf ("passed\n");
return 0;
}
@@ -473,17 +469,17 @@ int testdram(void)
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
-ft_board_setup(void *blob, bd_t *bd)
+ft_board_setup (void *blob, bd_t *bd)
{
u32 *p;
int len;
- ft_cpu_setup(blob, bd);
+ ft_cpu_setup (blob, bd);
- p = ft_get_prop(blob, "/memory/reg", &len);
+ p = ft_get_prop (blob, "/memory/reg", &len);
if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
+ *p++ = cpu_to_be32 (bd->bi_memstart);
+ *p = cpu_to_be32 (bd->bi_memsize);
}
}
#endif
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
index 6f517f5..fdb5365 100644
--- a/board/mpc7448hpc2/tsi108_init.c
+++ b/board/mpc7448hpc2/tsi108_init.c
@@ -1,6 +1,6 @@
/*****************************************************************************
* (C) Copyright 2003; Tundra Semiconductor Corp.
- *
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -33,7 +33,7 @@
#include <asm/processor.h>
#include <tsi108.h>
-extern void mpicInit(int verbose);
+extern void mpicInit (int verbose);
/*
* Configuration Options
@@ -118,11 +118,11 @@ static PLL_CTRL_SET pll0_config[8] = {
static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
/*
- * get_board_bus_clk()
+ * get_board_bus_clk ()
*
* returns the bus clock in Hz.
*/
-unsigned long get_board_bus_clk(void)
+unsigned long get_board_bus_clk (void)
{
ulong i;
@@ -134,37 +134,38 @@ unsigned long get_board_bus_clk(void)
}
/*
- * board_early_init_f()
+ * board_early_init_f ()
*
* board-specific initialization executed from flash
*/
-int board_early_init_f(void)
+int board_early_init_f (void)
{
DECLARE_GLOBAL_DATA_PTR;
ulong i;
gd->mem_clk = 0;
- i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
- i = (i >> 20) & 0x07;
+ i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+ CG_PWRUP_STATUS);
+ i = (i >> 20) & 0x07; /* value of SW4[4:7] */
switch (i) {
- case 0:
- printf("Using external clock\n");
+ case 0: /* external clock */
+ printf ("Using external clock\n");
break;
- case 1:
+ case 1: /* system clock */
gd->mem_clk = gd->bus_clk;
break;
- case 4:
- case 5:
- case 6:
+ case 4: /* 133 MHz */
+ case 5: /* 166 MHz */
+ case 6: /* 200 MHz */
gd->mem_clk = pb_clk_sel[i] * 1000000;
break;
default:
- printf("Invalid DDR2 clock setting\n");
+ printf ("Invalid DDR2 clock setting\n");
return -1;
}
- printf("BUS! %d MHz\n", get_board_bus_clk() / 1000000);
- printf("MEM! %d MHz\n", gd->mem_clk / 1000000);
+ printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
return 0;
}
@@ -173,175 +174,174 @@ int board_early_init_f(void)
* relocation. Contains code that cannot be executed from flash.
*/
-int board_early_init_r(void)
+int board_early_init_r (void)
{
ulong temp, i;
ulong reg_val;
volatile ulong *reg_ptr;
reg_ptr =
- (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
for (i = 0; i < 32; i++) {
*reg_ptr++ = 0x00000201; /* SWAP ENABLED */
*reg_ptr++ = 0x00;
}
- __asm__ __volatile__("eieio");
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
/* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
- out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
- 0x80000001);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+ 0x80000001);
+ __asm__ __volatile__ ("sync");
/* Make sure that OCN_BAR2 decoder is set (to allow following immediate
- * read from SDRAM)
+ * read from SDRAM)
*/
temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("sync");
/*
* Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
* processor bus address space. Immediately after reset LUT and address
* translation are disabled for this BAR. Now we have to initialize LUT
* and switch from the BOOT mode to the normal operation mode.
- *
+ *
* The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
- * and covers 512MB of address space. To allow larger aperture we also
+ * and covers 512MB of address space. To allow larger aperture we also
* have to relocate register window of Tsi108
*
- * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
+ * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
* mode.
- *
+ *
* initialize pointer to LUT associated with PB_OCN_BAR1
*/
reg_ptr =
- (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
for (i = 0; i < 32; i++) {
*reg_ptr++ = pb2ocn_lut1[i].lower;
*reg_ptr++ = pb2ocn_lut1[i].upper;
}
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("sync");
/* Base addresses for Cs0, CS1, CS2, CS3 */
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
- 0x00000000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
- 0x00100000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+ 0x00100000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
- 0x00200000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+ 0x00200000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
- 0x00300000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+ 0x00300000);
+ __asm__ __volatile__ ("sync");
/* Masks for HLP banks */
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
- 0xFFF00000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
- 0xFFF00000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
- 0xFFF00000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
- 0xFFF00000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+ 0xFFF00000);
+ __asm__ __volatile__ ("sync");
/* Set CTRL0 values for banks */
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
- 0x7FFC44C2);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
- 0x7FFC44C0);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
- 0x7FFC44C0);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+ 0x7FFC44C0);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
- 0x7FFC44C2);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+ 0x7FFC44C2);
+ __asm__ __volatile__ ("sync");
/* Set banks to latched mode, enabled, and other default settings */
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+ 0x7C0F2000);
+ __asm__ __volatile__ ("sync");
/*
* Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
* value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
*/
- out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
- 0xE0000011);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+ 0xE0000011);
+ __asm__ __volatile__ ("sync");
- /* Make sure that OCN_BAR2 decoder is set (to allow following
- * immediate read from SDRAM)
+ /* Make sure that OCN_BAR2 decoder is set (to allow following
+ * immediate read from SDRAM)
*/
-
+
temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("sync");
/*
* SRI: At this point we have enabled the HLP banks. That means we can
* now read from the NVRAM and initialize the environment variables.
* We will over-ride the env_init called in board_init_f
* This is really a work-around because, the HLP bank 1
- * where NVRAM resides is not visible during board_init_f
+ * where NVRAM resides is not visible during board_init_f
* (lib_ppc/board.c)
* Alternatively, we could use the I2C EEPROM at start-up to configure
* and enable all HLP banks and not just HLP 0 as is being done for
* Taiga Rev. 2.
*/
- env_init();
+ env_init ();
#ifndef DISABLE_PBM
/*
- * For IBM processors we have to set Address-Only commands generated
+ * For IBM processors we have to set Address-Only commands generated
* by PBM that are different from ones set after reset.
*/
- temp = get_cpu_type();
+ temp = get_cpu_type ();
- if ((CPU_750FX == temp) || (CPU_750GX == temp)) {
- out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
- 0x00009955);
- }
+ if ((CPU_750FX == temp) || (CPU_750GX == temp))
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+ 0x00009955);
#endif /* DISABLE_PBM */
#ifdef CONFIG_PCI
@@ -350,42 +350,42 @@ int board_early_init_r(void)
*/
/* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0_UPPER,
- 0);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ PCI_PFAB_BAR0_UPPER, 0);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
- 0xFB000001);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+ 0xFB000001);
+ __asm__ __volatile__ ("sync");
/* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
- temp =
- in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
+ temp = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
temp &= ~0xFF00; /* Clear the BUS_NUM field */
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
- temp);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+ temp);
/* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
- 0);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+ 0);
+ __asm__ __volatile__ ("sync");
/* This register is on the PCI side to interpret the address it receives
- * and maps it as a IO address.
+ * and maps it as a IO address.
*/
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
- 0xFA000001);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+ 0xFA000001);
+ __asm__ __volatile__ ("sync");
/*
* Map PCI/X Memory Space
*
- * Transactions directed from OCM to PCI Memory Space are directed
+ * Transactions directed from OCM to PCI Memory Space are directed
* from PB to PCI
* unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
* If address remapping is required the corresponding PCI_PFAB_MEM32
@@ -393,7 +393,7 @@ int board_early_init_r(void)
*
* Map the path from the PCI/X bus into the system memory
*
- * The memory mapped window assotiated with PCI P2O_BAR2 provides
+ * The memory mapped window assotiated with PCI P2O_BAR2 provides
* access to the system memory without address remapping.
* All system memory is opened for accesses initiated by PCI/X bus
* masters.
@@ -404,13 +404,13 @@ int board_early_init_r(void)
*/
reg_ptr =
- (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
#ifdef DISABLE_PBM
- /* In case when PBM is disabled (no HW supported cache snoopng on PB)
- * P2O_BAR2 is directly mapped into the system memory without address
- * translation.
+ /* In case when PBM is disabled (no HW supported cache snoopng on PB)
+ * P2O_BAR2 is directly mapped into the system memory without address
+ * translation.
*/
reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */
@@ -438,30 +438,30 @@ int board_early_init_r(void)
reg_val = 0x00007100;
#endif
- __asm__ __volatile__("eieio");
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
- reg_val);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
- /* Set 64-bit PCI bus address for system memory
- * ( 0 is the best choice for easy mapping)
+ /* Set 64-bit PCI bus address for system memory
+ * ( 0 is the best choice for easy mapping)
*/
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
- 0x00000000);
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
- 0x00000000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+ 0x00000000);
+ __asm__ __volatile__ ("sync");
#ifndef DISABLE_PBM
/*
- * The memory mapped window assotiated with PCI P2O_BAR3 provides
- * access to the system memory using SDRAM OCN port and address
- * translation. This is alternative way to access SDRAM from PCI
+ * The memory mapped window assotiated with PCI P2O_BAR3 provides
+ * access to the system memory using SDRAM OCN port and address
+ * translation. This is alternative way to access SDRAM from PCI
* required for Tsi108 emulation testing.
- * All system memory is opened for accesses initiated by
+ * All system memory is opened for accesses initiated by
* PCI/X bus masters.
*
* Initialize LUT associated with PCI P2O_BAR3
@@ -469,7 +469,7 @@ int board_early_init_r(void)
* set pointer to LUT associated with PCI P2O_BAR3
*/
reg_ptr =
- (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+ (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
reg_val = 0x00000004; /* Destination port = SDC */
@@ -483,45 +483,45 @@ int board_early_init_r(void)
reg_val += 0x01000000;
}
- __asm__ __volatile__("eieio");
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("eieio");
+ __asm__ __volatile__ ("sync");
/* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
reg_val =
- in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+ in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
PCI_P2O_PAGE_SIZES);
reg_val &= ~0x00FF;
reg_val |= 0x0071;
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
- reg_val);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+ reg_val);
+ __asm__ __volatile__ ("sync");
/* Set 64-bit base PCI bus address for window (0x20000000) */
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
- 0x00000000);
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
- 0x20000000);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+ 0x20000000);
+ __asm__ __volatile__ ("sync");
#endif /* !DISABLE_PBM */
#ifdef ENABLE_PCI_CSR_BAR
/* open if required access to Tsi108 CSRs from the PCI/X bus */
/* enable BAR0 on the PCI/X bus */
- reg_val =
- in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
+ reg_val = in32(CFG_TSI108_CSR_BASE +
+ TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
reg_val |= 0x02;
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
- reg_val);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+ reg_val);
+ __asm__ __volatile__ ("sync");
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
- 0x00000000);
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
- CFG_TSI108_CSR_BASE);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+ 0x00000000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+ CFG_TSI108_CSR_BASE);
+ __asm__ __volatile__ ("sync");
#endif
@@ -531,32 +531,32 @@ int board_early_init_r(void)
reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
reg_val |= 0x06;
- out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+ __asm__ __volatile__ ("sync");
#endif /* CONFIG_PCI */
/*
* Initialize MPIC outputs (interrupt pins):
* Interrupt routing on the Grendel Emul. Board:
- * PB_INT[0] -> INT (CPU0)
- * PB_INT[1] -> INT (CPU1)
- * PB_INT[2] -> MCP (CPU0)
- * PB_INT[3] -> MCP (CPU1)
+ * PB_INT[0] -> INT (CPU0)
+ * PB_INT[1] -> INT (CPU1)
+ * PB_INT[2] -> MCP (CPU0)
+ * PB_INT[3] -> MCP (CPU1)
* Set interrupt controller outputs as Level_Sensitive/Active_Low
*/
- out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
- out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
- out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
- out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
- __asm__ __volatile__("sync");
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+ __asm__ __volatile__ ("sync");
/*
* Ensure that Machine Check exception is enabled
* We need it to support PCI Bus probing (configuration reads)
*/
- reg_val = mfmsr();
+ reg_val = mfmsr ();
mtmsr(reg_val | MSR_ME);
return 0;
@@ -567,7 +567,7 @@ int board_early_init_r(void)
* used in the misc_init_r function
*/
-unsigned long get_l2cr(void)
+unsigned long get_l2cr (void)
{
unsigned long l2controlreg;
asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
@@ -581,79 +581,82 @@ unsigned long get_l2cr(void)
*
*/
-int misc_init_r(void)
+int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */
ulong i;
/* Ensure that Spread-Spectrum is disabled */
- out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
- out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
/* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
* Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
*/
- out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x002e0044); /* D = 0.25% */
- out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, 0x00000039); /* BWADJ */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x002e0044); /* D = 0.25% */
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+ 0x00000039); /* BWADJ */
/* Initialize PLL0: CG_PB_CLKO */
/* Detect PB clock freq. */
i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
- out32(CFG_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
- out32(CFG_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
/* Wait and set SSEN for both PLL0 and 1 */
- udelay(1000);
- out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x802e0044); /* D=0.25% */
- out32(CFG_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
- 0x80000000 | pll0_config[i].ctrl0);
+ udelay (1000);
+ out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+ 0x802e0044); /* D=0.25% */
+ out32 (CFG_TSI108_CSR_BASE +
+ TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
+ 0x80000000 | pll0_config[i].ctrl0);
#endif /* CFG_CLK_SPREAD */
#ifdef CFG_L2
- l2cache_enable();
+ l2cache_enable ();
#endif
- printf("BUS: %d MHz\n", gd->bus_clk / 1000000);
- printf("MEM: %d MHz\n", gd->mem_clk / 1000000);
+ printf ("BUS: %d MHz\n", gd->bus_clk / 1000000);
+ printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
/*
- * All the information needed to print the cache details is avaiblable
- * at this point i.e. above call to l2cache_enable is the very last
- * thing done with regards to enabling diabling the cache.
+ * All the information needed to print the cache details is avaiblable
+ * at this point i.e. above call to l2cache_enable is the very last
+ * thing done with regards to enabling diabling the cache.
* So this seems like a good place to print all this information
*/
- printf("CACHE: ");
+ printf ("CACHE: ");
switch (get_cpu_type()) {
case CPU_7447A:
- printf("L1 Instruction cache - 32KB 8-way");
- (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
- printf(" L1 Data cache - 32KB 8-way");
- (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
- printf(" Unified L2 cache - 512KB 8-way");
- (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
- printf("\n");
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 512KB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("\n");
break;
case CPU_7448:
- printf("L1 Instruction cache - 32KB 8-way");
- (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
- printf(" L1 Data cache - 32KB 8-way");
- (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
- printf(" Unified L2 cache - 1MB 8-way");
- (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") :
- printf(" DISABLED\n");
+ printf ("L1 Instruction cache - 32KB 8-way");
+ (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("L1 Data cache - 32KB 8-way");
+ (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
+ printf ("Unified L2 cache - 1MB 8-way");
+ (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+ printf (" DISABLED\n");
break;
default:
break;