Merge branch 'mimc200'

1 files changed, 44 insertions, 73 deletions

diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 8516dcb..6df741e 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -27,9 +27,10 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
 #include <lcd.h>
 
-#define SM_PM_GCCTRL				0x0060
+#include "../../../cpu/at32ap/hsmc3.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -54,98 +55,59 @@ int board_early_init_f(void)
 	/* Enable SDRAM in the EBI mux */
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-	gpio_enable_ebi();
-	gpio_enable_usart1();
-
-	/* enable higher address lines for larger flash devices */
-	gpio_select_periph_A(GPIO_PIN_PE16, 0);	/* ADDR23 */
-	gpio_select_periph_A(GPIO_PIN_PE17, 0);	/* ADDR24 */
-	gpio_select_periph_A(GPIO_PIN_PE18, 0);	/* ADDR25 */
-
-	/* enable data flash chip select */
-	gpio_select_periph_A(GPIO_PIN_PE25, 0);	/* NCS2 */
+	/* Enable 26 address bits and NCS2 */
+	portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 	/* de-assert "force sys reset" pin */
-	gpio_set_value(GPIO_PIN_PD15, 1);	/* FORCE RESET	*/
-	gpio_select_pio(GPIO_PIN_PD15, GPIOF_OUTPUT);
+	portmux_select_gpio(PORTMUX_PORT_D, 1 << 15,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
 
 	/* init custom i/o */
 	/* cpu type inputs */
-	gpio_select_pio(GPIO_PIN_PE19, 0);
-	gpio_select_pio(GPIO_PIN_PE20, 0);
-	gpio_select_pio(GPIO_PIN_PE23, 0);
+	portmux_select_gpio(PORTMUX_PORT_E, (1 << 19) | (1 << 20) | (1 << 23),
+			PORTMUX_DIR_INPUT);
 	/* main board type inputs */
-	gpio_select_pio(GPIO_PIN_PB19, 0);
-	gpio_select_pio(GPIO_PIN_PB29, 0);
+	portmux_select_gpio(PORTMUX_PORT_B, (1 << 19) | (1 << 29),
+			PORTMUX_DIR_INPUT);
 	/* DEBUG input (use weak pullup) */
-	gpio_select_pio(GPIO_PIN_PE21, GPIOF_PULLUP);
+	portmux_select_gpio(PORTMUX_PORT_E, 1 << 21,
+			PORTMUX_DIR_INPUT | PORTMUX_PULL_UP);
 
 	/* are we suppressing the console ? */
-	if (gpio_get_value(GPIO_PIN_PE21) == 1)
-		gd->flags |= GD_FLG_SILENT;
+	if (gpio_get_value(GPIO_PIN_PE(21)) == 1)
+		gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
 
 	/* reset phys */
-	gpio_select_pio(GPIO_PIN_PE24, 0);
-	gpio_set_value(GPIO_PIN_PC18, 1);	/* PHY RESET	*/
-	gpio_select_pio(GPIO_PIN_PC18, GPIOF_OUTPUT);
-
-	/* GCLK0 - 10MHz clock */
-	writel(0x00000004, (void *)SM_BASE + SM_PM_GCCTRL);
-	gpio_select_periph_A(GPIO_PIN_PA30, 0);
+	portmux_select_gpio(PORTMUX_PORT_E, 1 << 24, PORTMUX_DIR_INPUT);
+	portmux_select_gpio(PORTMUX_PORT_C, 1 << 18,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
 
 	udelay(5000);
 
 	/* release phys reset */
-	gpio_set_value(GPIO_PIN_PC18, 0);	/* PHY RESET (Release)	*/
+	gpio_set_value(GPIO_PIN_PC(18), 0);	/* PHY RESET (Release)	*/
+
+	/* setup Data Flash chip select (NCS2) */
+	hsmc3_writel(MODE2, 0x20121003);
+	hsmc3_writel(CYCLE2, 0x000a0009);
+	hsmc3_writel(PULSE2, 0x0a060806);
+	hsmc3_writel(SETUP2, 0x00030102);
+
+	/* setup FRAM chip select (NCS3) */
+	hsmc3_writel(MODE3, 0x10120001);
+	hsmc3_writel(CYCLE3, 0x001e001d);
+	hsmc3_writel(PULSE3, 0x08040704);
+	hsmc3_writel(SETUP3, 0x02050204);
 
 #if defined(CONFIG_MACB)
 	/* init macb0 pins */
-	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
-	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
-	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
-	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
-	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
-	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
-	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
-	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
-	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
-#endif
-
-	/* init macb1 pins */
-	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
-	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
-	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
-	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
-	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
-	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
-	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
-	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
-	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
-	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
-	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
-#endif
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
+	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
 #endif
 
 #if defined(CONFIG_MMC)
-	gpio_enable_mmci();
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
 	return 0;
@@ -171,10 +133,19 @@ phys_size_t initdram(int board_type)
 	return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
 	gd->bd->bi_phy_id[1] = 0x03;
+	return 0;
+}
+
+int board_postclk_init(void)
+{
+	/* Use GCLK0 as 10MHz output */
+	gclk_enable_output(0, PORTMUX_DRIVE_LOW);
+	gclk_set_rate(0, GCLK_PARENT_OSC0, 10000000);
+	return 0;
 }
 
 /* SPI chip select control */