MIPS: Add VCT board series support (Part 2/3)

Signed-off-by: Stefan Roese <sr@denx.de>

9 files changed, 2047 insertions, 0 deletions

diff --git a/board/micronas/vct/ehci.c b/board/micronas/vct/ehci.c
new file mode 100644
index 0000000..d04bdce
--- /dev/null
+++ b/board/micronas/vct/ehci.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Original Author Guenter Gebhardt
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include "vct.h"
+
+int vct_ehci_hcd_init(u32 *hccr, u32 *hcor)
+{
+	int retval;
+	u32 val;
+	u32 addr;
+
+	dcgu_set_reset_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_ON);
+	dcgu_set_reset_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_ON);
+	dcgu_set_clk_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_ON);
+	dcgu_set_clk_switch(DCGU_HW_MODULE_USB_PLL, DCGU_SWITCH_ON);
+	dcgu_set_reset_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_OFF);
+
+	/* Wait until (DCGU_USBPHY_STAT == 7) */
+	addr = DCGU_USBPHY_STAT(DCGU_BASE);
+	val = reg_read(addr);
+	while (val != 7)
+		val = reg_read(addr);
+
+	dcgu_set_clk_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_ON);
+	dcgu_set_reset_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_OFF);
+
+	retval = scc_reset(SCC_USB_RW, 0);
+	if (retval) {
+		printf("scc_reset(SCC_USB_RW, 0) returned: 0x%x\n", retval);
+		return retval;
+	} else {
+		retval = scc_reset(SCC_CPU1_SPDMA_RW, 0);
+		if (retval) {
+			printf("scc_reset(SCC_CPU1_SPDMA_RW, 0) returned: 0x%x\n",
+			       retval);
+			return retval;
+		}
+	}
+
+	if (!retval) {
+		/*
+		 * For the AGU bypass, where the  SCC client provides full
+		 * physical address
+		 */
+		scc_set_usb_address_generation_mode(1);
+		scc_setup_dma(SCC_USB_RW, BCU_USB_BUFFER_1, DMA_LINEAR,
+			      USE_NO_FH, DMA_READ, 0);
+		scc_setup_dma(SCC_CPU1_SPDMA_RW, BCU_USB_BUFFER_1, DMA_LINEAR,
+			      USE_NO_FH, DMA_WRITE, 0);
+		scc_setup_dma(SCC_USB_RW, BCU_USB_BUFFER_0, DMA_LINEAR,
+			      USE_NO_FH, DMA_WRITE, 0);
+		scc_setup_dma(SCC_CPU1_SPDMA_RW, BCU_USB_BUFFER_0, DMA_LINEAR,
+			      USE_NO_FH, DMA_READ, 0);
+
+		/* Enable memory interface */
+		scc_enable(SCC_USB_RW, 1);
+
+		/* Start (start_cmd=0) DMAs */
+		scc_dma_cmd(SCC_USB_RW, DMA_START, 0, DMA_READ);
+		scc_dma_cmd(SCC_USB_RW, DMA_START, 0, DMA_WRITE);
+	} else {
+		printf("Cannot configure USB memory channel.\n");
+		printf("USB can not access RAM. SCC configuration failed.\n");
+		return retval;
+	}
+
+	/* Wait a short while */
+	udelay(300000);
+
+	reg_write(USBH_BURSTSIZE(USBH_BASE), 0x00001c1c);
+
+	/* Set EHCI structures and DATA in RAM */
+	reg_write(USBH_USBHMISC(USBH_BASE), 0x00840003);
+	/* Set USBMODE to bigendian and set host mode */
+	reg_write(USBH_USBMODE(USBH_BASE), 0x00000007);
+
+	/*
+	 * USBH_BURSTSIZE MUST EQUAL 0x00001c1c in order for
+	 * 512 byte USB transfers on the bulk pipe to work properly.
+	 * Set USBH_BURSTSIZE to 0x00001c1c
+	 */
+	reg_write(USBH_BURSTSIZE(USBH_BASE), 0x00001c1c);
+
+	/* Insert access register addresses */
+	*hccr = REG_GLOBAL_START_ADDR + USBH_CAPLENGTH(USBH_BASE);
+	*hcor = REG_GLOBAL_START_ADDR + USBH_USBCMD(USBH_BASE);
+
+	return 0;
+}
diff --git a/board/micronas/vct/gpio.c b/board/micronas/vct/gpio.c
new file mode 100644
index 0000000..2c113be
--- /dev/null
+++ b/board/micronas/vct/gpio.c
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include "vct.h"
+
+/*
+ * Find out to which of the 2 gpio modules the pin specified in the
+ * argument belongs:
+ * GPIO_MODULE yields 0 for pins  0 to 31,
+ *                    1 for pins 32 to 63
+ */
+#define GPIO_MODULE(pin)	((pin) >> 5)
+
+/*
+ * Bit position within a 32-bit peripheral register (where every
+ * bit is one bitslice)
+ */
+#define MASK(pin)		(1 << ((pin) & 0x1F))
+#define BASE_ADDR(mod)		module_base[mod]
+
+/*
+ * Lookup table for transforming gpio module number 0 to 2 to
+ * address offsets
+ */
+static u32 module_base[] = {
+	GPIO1_BASE,
+	GPIO2_BASE
+};
+
+static void clrsetbits(u32 addr, u32 and_mask, u32 or_mask)
+{
+	reg_write(addr, (reg_read(addr) & ~and_mask) | or_mask);
+}
+
+int vct_gpio_dir(int pin, int dir)
+{
+	u32 gpio_base;
+
+	gpio_base = BASE_ADDR(GPIO_MODULE(pin));
+
+	if (dir == 0)
+		clrsetbits(GPIO_SWPORTA_DDR(gpio_base), MASK(pin), 0);
+	else
+		clrsetbits(GPIO_SWPORTA_DDR(gpio_base), 0, MASK(pin));
+
+	return 0;
+}
+
+void vct_gpio_set(int pin, int val)
+{
+	u32 gpio_base;
+
+	gpio_base = BASE_ADDR(GPIO_MODULE(pin));
+
+	if (val == 0)
+		clrsetbits(GPIO_SWPORTA_DR(gpio_base), MASK(pin), 0);
+	else
+		clrsetbits(GPIO_SWPORTA_DR(gpio_base), 0, MASK(pin));
+}
+
+int vct_gpio_get(int pin)
+{
+	u32 gpio_base;
+	u32 value;
+
+	gpio_base = BASE_ADDR(GPIO_MODULE(pin));
+	value = reg_read(GPIO_EXT_PORTA(gpio_base));
+
+	return ((value & MASK(pin)) ? 1 : 0);
+}
diff --git a/board/micronas/vct/scc.c b/board/micronas/vct/scc.c
new file mode 100644
index 0000000..0368183
--- /dev/null
+++ b/board/micronas/vct/scc.c
@@ -0,0 +1,669 @@
+/*
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+
+#include "vct.h"
+
+/*
+ * List of statically defined buffers per SCC.
+ * The first entry in the table is the number of fixed buffers
+ * followed by the list of buffer IDs
+ */
+static u32 buffer_list_0[] = { 6, 120, 121, 122, 123, 139, 140 };
+static u32 buffer_list_1[] = { 6, 120, 121, 122, 123, 139, 140 };
+static u32 buffer_list_2[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_3[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_4[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_5[] = { 3, 127, 139, 140 };
+static u32 buffer_list_6[] = { 3, 127, 139, 140 };
+static u32 buffer_list_7[] = { 6, 128, 129, 130, 131, 139, 140 };
+static u32 buffer_list_8[] = { 6, 128, 129, 130, 131, 139, 140 };
+static u32 buffer_list_9[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_10[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_11[] = { 5, 124, 125, 126, 139, 140 };
+static u32 buffer_list_12[] = { 6, 132, 133, 134, 135, 139, 140 };
+static u32 buffer_list_13[] = { 6, 132, 133, 134, 135, 139, 140 };
+static u32 buffer_list_14[] = { 4, 137, 138, 139, 140 };
+static u32 buffer_list_15[] = { 6, 136, 136, 137, 138, 139, 140 };
+
+/** Issue#7674 (new) - DP/DVP buffer assignment */
+static u32 buffer_list_16[] = { 6, 106, 108, 109, 107, 139, 140 };
+static u32 buffer_list_17[] = { 6, 106, 110, 107, 111, 139, 140 };
+static u32 buffer_list_18[] = { 6, 106, 113, 107, 114, 139, 140 };
+static u32 buffer_list_19[] = { 3, 112, 139, 140 };
+static u32 buffer_list_20[] = { 35, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				79, 80, 81, 82, 83, 84, 85, 86, 139, 140 };
+static u32 buffer_list_21[] = { 27, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				139, 140 };
+static u32 buffer_list_22[] = { 81, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+				37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+				49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60,
+				61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72,
+				73, 74, 75, 76, 77, 78, 139, 140 };
+static u32 buffer_list_23[] = { 29, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				88, 89, 139, 140 };
+static u32 buffer_list_24[] = { 6, 90, 91, 92, 93, 139, 140 };
+static u32 buffer_list_25[] = { 18, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,
+				100, 101, 102, 103, 104, 105, 139, 140 };
+static u32 buffer_list_26[] = { 5, 94, 95, 96, 139, 140 };
+static u32 buffer_list_27[] = { 5, 97, 98, 99, 139, 140 };
+static u32 buffer_list_28[] = { 5, 100, 101, 102, 139, 140 };
+static u32 buffer_list_29[] = { 5, 103, 104, 105, 139, 140 };
+static u32 buffer_list_30[] = { 10, 108, 109, 110, 111, 113, 114, 116, 117,
+				139, 140 };
+static u32 buffer_list_31[] = { 13, 106, 107, 108, 109, 110, 111, 113, 114,
+				115, 116, 117, 139, 140 };
+static u32 buffer_list_32[] = { 13, 106, 107, 108, 109, 110, 111, 113, 114,
+				115, 116, 117, 139, 140 };
+static u32 buffer_list_33[] = { 27, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				139, 140 };
+static u32 buffer_list_34[] = { 27, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				139, 140 };
+static u32 buffer_list_35[] = { 28, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				87, 139, 140 };
+static u32 buffer_list_36[] = { 28, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				87, 139, 140 };
+static u32 buffer_list_37[] = { 27, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				139, 140 };
+static u32 buffer_list_38[] = { 29, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				118, 119, 139, 140 };
+static u32 buffer_list_39[] = { 91, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
+				13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+				25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+				37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+				49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60,
+				61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72,
+				73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84,
+				85, 86, 118, 119, 139, 140 };
+static u32 buffer_list_40[] = { 0 };
+
+/*
+ * List of statically defined vcid.csize values.
+ * The first entry in the table is the number of possible csize values
+ * followed by the list of data path values in bits.
+ */
+static u32 csize_list_0[] = { 2, 0, 1 };
+static u32 csize_list_1[] = { 2, 0, 1 };
+static u32 csize_list_2[] = { 1, 1 };
+static u32 csize_list_3[] = { 1, 1 };
+static u32 csize_list_4[] = { 1, 1 };
+static u32 csize_list_5[] = { 1, 0 };
+static u32 csize_list_6[] = { 1, 0 };
+static u32 csize_list_7[] = { 1, 1 };
+static u32 csize_list_8[] = { 1, 1 };
+static u32 csize_list_9[] = { 1, 1 };
+static u32 csize_list_10[] = { 1, 1 };
+static u32 csize_list_11[] = { 1, 1 };
+static u32 csize_list_12[] = { 1, 1 };
+static u32 csize_list_13[] = { 1, 1 };
+static u32 csize_list_14[] = { 1, 2 };
+static u32 csize_list_15[] = { 1, 4 };
+static u32 csize_list_16[] = { 3, 0, 1, 2 };
+static u32 csize_list_17[] = { 3, 0, 1, 2 };
+static u32 csize_list_18[] = { 3, 0, 1, 2 };
+static u32 csize_list_19[] = { 1, 2 };
+static u32 csize_list_20[] = { 1, 0 };
+static u32 csize_list_21[] = { 1, 0 };
+static u32 csize_list_22[] = { 1, 2 };
+static u32 csize_list_23[] = { 1, 3 };
+static u32 csize_list_24[] = { 1, 3 };
+static u32 csize_list_25[] = { 1, 3 };
+static u32 csize_list_26[] = { 1, 0 };
+static u32 csize_list_27[] = { 1, 0 };
+static u32 csize_list_28[] = { 1, 0 };
+static u32 csize_list_29[] = { 1, 0 };
+static u32 csize_list_30[] = { 1, 2 };
+static u32 csize_list_31[] = { 1, 2 };
+static u32 csize_list_32[] = { 1, 2 };
+static u32 csize_list_33[] = { 1, 2 };
+static u32 csize_list_34[] = { 1, 2 };
+static u32 csize_list_35[] = { 1, 2 };
+static u32 csize_list_36[] = { 1, 2 };
+static u32 csize_list_37[] = { 2, 0, 1 };
+static u32 csize_list_38[] = { 1, 2 };
+static u32 csize_list_39[] = { 1, 3 };
+static u32 csize_list_40[] = { 1, 3 };
+
+/*
+ * SCC_Configuration table
+ */
+static const struct scc_descriptor scc_descriptor_table[] = {
+/* scn  scc_name  profile  SCC  scc_id  mci_id  rd  wr   m   p fh  si cfg sta */
+	{"fe_", "fe_3dcomb_wr", STRM_P, SCC0_BASE, 0, 0, 0, 4, 1, 1, 0, 0, 0, 1,
+	 buffer_list_0, csize_list_0},
+	{"fe_", "fe_3dcomb_rd", STRM_P, SCC1_BASE, 1, 18, 4, 0, 1, 1, 0, 1, 0,
+	 1, buffer_list_1, csize_list_1},
+	{"di_", "di_tnr_wr", STRM_P, SCC2_BASE, 2, 1, 0, 3, 1, 1, 0, 2, 0, 1,
+	 buffer_list_2, csize_list_2},
+	{"di_", "di_tnr_field_rd", STRM_P, SCC3_BASE, 3, 19, 3, 0, 1, 1, 0, 3,
+	 0, 1, buffer_list_3, csize_list_3},
+	{"di_", "di_tnr_frame_rd", STRM_P, SCC4_BASE, 4, 20, 3, 0, 1, 1, 0, 4,
+	 0, 1, buffer_list_4, csize_list_4},
+	{"di_", "di_mval_wr", STRM_P, SCC5_BASE, 5, 2, 0, 1, 1, 1, 0, 5, 0, 1,
+	 buffer_list_5, csize_list_5},
+	{"di_", "di_mval_rd", STRM_P, SCC6_BASE, 6, 21, 1, 0, 1, 1, 0, 6, 0, 1,
+	 buffer_list_6, csize_list_6},
+	{"rc_", "rc_frame_wr", STRM_P, SCC7_BASE, 7, 3, 0, 4, 1, 1, 0, 7, 0, 1,
+	 buffer_list_7, csize_list_7},
+	{"rc_", "rc_frame0_rd", STRM_P, SCC8_BASE, 8, 22, 4, 0, 1, 1, 0, 8, 0,
+	 1, buffer_list_8, csize_list_8},
+	{"opt", "opt_field0_rd", STRM_P, SCC9_BASE, 9, 23, 3, 0, 1, 1, 0, 9, 0,
+	 1, buffer_list_9, csize_list_9},
+	{"opt", "opt_field1_rd", STRM_P, SCC10_BASE, 10, 24, 3, 0, 1, 1, 0, 10,
+	 0, 1, buffer_list_10, csize_list_10},
+	{"opt", "opt_field2_rd", STRM_P, SCC11_BASE, 11, 25, 3, 0, 1, 1, 0, 11,
+	 0, 1, buffer_list_11, csize_list_11},
+	{"pip", "pip_frame_wr", STRM_P, SCC12_BASE, 12, 4, 0, 4, 1, 1, 0, 12, 0,
+	 1, buffer_list_12, csize_list_12},
+	{"pip", "pip_frame_rd", STRM_P, SCC13_BASE, 13, 26, 4, 0, 1, 1, 0, 13,
+	 0, 1, buffer_list_13, csize_list_13},
+	{"dp_", "dp_agpu_rd", STRM_P, SCC14_BASE, 14, 27, 2, 0, 2, 1, 0, 14, 0,
+	 1, buffer_list_14, csize_list_14},
+	{"ewa", "ewarp_rw", SRMD, SCC15_BASE, 15, 11, 1, 1, 0, 0, 0, -1, 0, 0,
+	 buffer_list_15, csize_list_15},
+	{"dp_", "dp_osd_rd", STRM_P, SCC16_BASE, 16, 28, 3, 0, 2, 1, 0, 15, 0,
+	 1, buffer_list_16, csize_list_16},
+	{"dp_", "dp_graphic_rd", STRM_P, SCC17_BASE, 17, 29, 3, 0, 2, 1, 0, 16,
+	 0, 1, buffer_list_17, csize_list_17},
+	{"dvp", "dvp_osd_rd", STRM_P, SCC18_BASE, 18, 30, 2, 0, 2, 1, 0, 17, 0,
+	 1, buffer_list_18, csize_list_18},
+	{"dvp", "dvp_vbi_rd", STRM_D, SCC19_BASE, 19, 31, 1, 0, 0, 1, 0, -1, 0,
+	 0, buffer_list_19, csize_list_19},
+	{"tsi", "tsio_wr", STRM_P, SCC20_BASE, 20, 5, 0, 8, 2, 1, 1, -1, 0, 0,
+	 buffer_list_20, csize_list_20},
+	{"tsi", "tsio_rd", STRM_P, SCC21_BASE, 21, 32, 4, 0, 2, 1, 1, -1, 0, 0,
+	 buffer_list_21, csize_list_21},
+	{"tsd", "tsd_wr", SRMD, SCC22_BASE, 22, 6, 0, 64, 0, 0, 1, -1, 0, 0,
+	 buffer_list_22, csize_list_22},
+	{"vd_", "vd_ud_st_rw", SRMD, SCC23_BASE, 23, 12, 2, 2, 0, 0, 1, -1, 0,
+	 0, buffer_list_23, csize_list_23},
+	{"vd_", "vd_frr_rd", SRMD, SCC24_BASE, 24, 33, 4, 0, 0, 0, 0, -1, 0, 0,
+	 buffer_list_24, csize_list_24},
+	{"vd_", "vd_frw_disp_wr", SRMD, SCC25_BASE, 25, 7, 0, 16, 0, 0, 0, -1,
+	 0, 0, buffer_list_25, csize_list_25},
+	{"mr_", "mr_vd_m_y_rd", STRM_P, SCC26_BASE, 26, 34, 3, 0, 2, 1, 0, 18,
+	 0, 1, buffer_list_26, csize_list_26},
+	{"mr_", "mr_vd_m_c_rd", STRM_P, SCC27_BASE, 27, 35, 3, 0, 2, 1, 0, 19,
+	 0, 1, buffer_list_27, csize_list_27},
+	{"mr_", "mr_vd_s_y_rd", STRM_P, SCC28_BASE, 28, 36, 3, 0, 2, 1, 0, 20,
+	 0, 1, buffer_list_28, csize_list_28},
+	{"mr_", "mr_vd_s_c_rd", STRM_P, SCC29_BASE, 29, 37, 3, 0, 2, 1, 0, 21,
+	 0, 1, buffer_list_29, csize_list_29},
+	{"ga_", "ga_wr", STRM_P, SCC30_BASE, 30, 8, 0, 1, 1, 1, 0, -1, 1, 1,
+	 buffer_list_30, csize_list_30},
+	{"ga_", "ga_src1_rd", STRM_P, SCC31_BASE, 31, 38, 1, 0, 1, 1, 0, -1, 1,
+	 1, buffer_list_31, csize_list_31},
+	{"ga_", "ga_src2_rd", STRM_P, SCC32_BASE, 32, 39, 1, 0, 1, 1, 0, -1, 1,
+	 1, buffer_list_32, csize_list_32},
+	{"ad_", "ad_rd", STRM_D, SCC33_BASE, 33, 40, 2, 0, 0, 1, 1, -1, 0, 0,
+	 buffer_list_33, csize_list_33},
+	{"ad_", "ad_wr", STRM_D, SCC34_BASE, 34, 9, 0, 3, 0, 1, 1, -1, 0, 0,
+	 buffer_list_34, csize_list_34},
+	{"abp", "abp_rd", STRM_D, SCC35_BASE, 35, 41, 5, 0, 0, 1, 1, -1, 0, 0,
+	 buffer_list_35, csize_list_35},
+	{"abp", "abp_wr", STRM_D, SCC36_BASE, 36, 10, 0, 3, 0, 1, 1, -1, 0, 0,
+	 buffer_list_36, csize_list_36},
+	{"ebi", "ebi_rw", STRM_P, SCC37_BASE, 37, 13, 4, 4, 2, 1, 1, -1, 0, 0,
+	 buffer_list_37, csize_list_37},
+	{"usb", "usb_rw", SRMD, SCC38_BASE, 38, 14, 1, 1, 0, 0, 1, -1, 0, 0,
+	 buffer_list_38, csize_list_38},
+	{"cpu", "cpu1_spdma_rw", SRMD, SCC39_BASE, 39, 15, 1, 1, 0, 0, 1, -1, 0,
+	 0, buffer_list_39, csize_list_39},
+	{"cpu", "cpu1_bridge_rw", SRMD, SCC40_BASE, 40, 16, 0, 0, 0, 0, 0, -1,
+	 0, 0, buffer_list_40, csize_list_40},
+};
+
+/* DMA state structures for read and write channels for each SCC */
+
+static struct scc_dma_state scc_state_rd_0[] = { {-1} };
+static struct scc_dma_state scc_state_wr_0[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_1[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_1[] = { {-1} };
+static struct scc_dma_state scc_state_rd_2[] = { {-1} };
+static struct scc_dma_state scc_state_wr_2[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_3[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_3[] = { {-1} };
+static struct scc_dma_state scc_state_rd_4[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_4[] = { {-1} };
+static struct scc_dma_state scc_state_rd_5[] = { {-1} };
+static struct scc_dma_state scc_state_wr_5[] = { {0} };
+static struct scc_dma_state scc_state_rd_6[] = { {0} };
+static struct scc_dma_state scc_state_wr_6[] = { {-1} };
+static struct scc_dma_state scc_state_rd_7[] = { {-1} };
+static struct scc_dma_state scc_state_wr_7[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_8[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_8[] = { {-1} };
+static struct scc_dma_state scc_state_rd_9[] = { {0}, {0}, {0}, };
+static struct scc_dma_state scc_state_wr_9[] = { {-1} };
+static struct scc_dma_state scc_state_rd_10[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_10[] = { {-1} };
+static struct scc_dma_state scc_state_rd_11[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_11[] = { {-1} };
+static struct scc_dma_state scc_state_rd_12[] = { {-1} };
+static struct scc_dma_state scc_state_wr_12[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_13[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_13[] = { {-1} };
+static struct scc_dma_state scc_state_rd_14[] = { {0}, {0} };
+static struct scc_dma_state scc_state_wr_14[] = { {-1} };
+static struct scc_dma_state scc_state_rd_15[] = { {0} };
+static struct scc_dma_state scc_state_wr_15[] = { {0} };
+static struct scc_dma_state scc_state_rd_16[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_16[] = { {-1} };
+static struct scc_dma_state scc_state_rd_17[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_17[] = { {-1} };
+static struct scc_dma_state scc_state_rd_18[] = { {0}, {0} };
+static struct scc_dma_state scc_state_wr_18[] = { {-1} };
+static struct scc_dma_state scc_state_rd_19[] = { {0} };
+static struct scc_dma_state scc_state_wr_19[] = { {-1} };
+static struct scc_dma_state scc_state_rd_20[] = { {-1} };
+static struct scc_dma_state scc_state_wr_20[] = {
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_21[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_21[] = { {-1} };
+static struct scc_dma_state scc_state_rd_22[] = { {-1} };
+static struct scc_dma_state scc_state_wr_22[] = {
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0},
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0},
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0},
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0},
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_23[] = { {0}, {0} };
+static struct scc_dma_state scc_state_wr_23[] = { {0}, {0} };
+static struct scc_dma_state scc_state_rd_24[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_24[] = { {-1} };
+static struct scc_dma_state scc_state_rd_25[] = { {-1} };
+static struct scc_dma_state scc_state_wr_25[] = {
+	{0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0}, {0},
+	{0}, {0} };
+static struct scc_dma_state scc_state_rd_26[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_26[] = { {-1} };
+static struct scc_dma_state scc_state_rd_27[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_27[] = { {-1} };
+static struct scc_dma_state scc_state_rd_28[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_28[] = { {-1} };
+static struct scc_dma_state scc_state_rd_29[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_29[] = { {-1} };
+static struct scc_dma_state scc_state_rd_30[] = { {-1} };
+static struct scc_dma_state scc_state_wr_30[] = { {0} };
+static struct scc_dma_state scc_state_rd_31[] = { {0} };
+static struct scc_dma_state scc_state_wr_31[] = { {-1} };
+static struct scc_dma_state scc_state_rd_32[] = { {0} };
+static struct scc_dma_state scc_state_wr_32[] = { {-1} };
+static struct scc_dma_state scc_state_rd_33[] = { {0}, {0} };
+static struct scc_dma_state scc_state_wr_33[] = { {-1} };
+static struct scc_dma_state scc_state_rd_34[] = { {-1} };
+static struct scc_dma_state scc_state_wr_34[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_35[] = { {0}, {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_35[] = { {-1} };
+static struct scc_dma_state scc_state_rd_36[] = { {-1} };
+static struct scc_dma_state scc_state_wr_36[] = { {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_37[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_wr_37[] = { {0}, {0}, {0}, {0} };
+static struct scc_dma_state scc_state_rd_38[] = { {0} };
+static struct scc_dma_state scc_state_wr_38[] = { {0} };
+static struct scc_dma_state scc_state_rd_39[] = { {0} };
+static struct scc_dma_state scc_state_wr_39[] = { {0} };
+static struct scc_dma_state scc_state_rd_40[] = { {-1} };
+static struct scc_dma_state scc_state_wr_40[] = { {-1} };
+
+/* DMA state references to access from the driver */
+static struct scc_dma_state *scc_state_rd[] = {
+	scc_state_rd_0,
+	scc_state_rd_1,
+	scc_state_rd_2,
+	scc_state_rd_3,
+	scc_state_rd_4,
+	scc_state_rd_5,
+	scc_state_rd_6,
+	scc_state_rd_7,
+	scc_state_rd_8,
+	scc_state_rd_9,
+	scc_state_rd_10,
+	scc_state_rd_11,
+	scc_state_rd_12,
+	scc_state_rd_13,
+	scc_state_rd_14,
+	scc_state_rd_15,
+	scc_state_rd_16,
+	scc_state_rd_17,
+	scc_state_rd_18,
+	scc_state_rd_19,
+	scc_state_rd_20,
+	scc_state_rd_21,
+	scc_state_rd_22,
+	scc_state_rd_23,
+	scc_state_rd_24,
+	scc_state_rd_25,
+	scc_state_rd_26,
+	scc_state_rd_27,
+	scc_state_rd_28,
+	scc_state_rd_29,
+	scc_state_rd_30,
+	scc_state_rd_31,
+	scc_state_rd_32,
+	scc_state_rd_33,
+	scc_state_rd_34,
+	scc_state_rd_35,
+	scc_state_rd_36,
+	scc_state_rd_37,
+	scc_state_rd_38,
+	scc_state_rd_39,
+	scc_state_rd_40,
+};
+
+static struct scc_dma_state *scc_state_wr[] = {
+	scc_state_wr_0,
+	scc_state_wr_1,
+	scc_state_wr_2,
+	scc_state_wr_3,
+	scc_state_wr_4,
+	scc_state_wr_5,
+	scc_state_wr_6,
+	scc_state_wr_7,
+	scc_state_wr_8,
+	scc_state_wr_9,
+	scc_state_wr_10,
+	scc_state_wr_11,
+	scc_state_wr_12,
+	scc_state_wr_13,
+	scc_state_wr_14,
+	scc_state_wr_15,
+	scc_state_wr_16,
+	scc_state_wr_17,
+	scc_state_wr_18,
+	scc_state_wr_19,
+	scc_state_wr_20,
+	scc_state_wr_21,
+	scc_state_wr_22,
+	scc_state_wr_23,
+	scc_state_wr_24,
+	scc_state_wr_25,
+	scc_state_wr_26,
+	scc_state_wr_27,
+	scc_state_wr_28,
+	scc_state_wr_29,
+	scc_state_wr_30,
+	scc_state_wr_31,
+	scc_state_wr_32,
+	scc_state_wr_33,
+	scc_state_wr_34,
+	scc_state_wr_35,
+	scc_state_wr_36,
+	scc_state_wr_37,
+	scc_state_wr_38,
+	scc_state_wr_39,
+	scc_state_wr_40,
+};
+
+static u32 scc_takeover_mode = SCC_TO_IMMEDIATE;
+
+/* Change mode of the SPDMA for given direction */
+static u32 scc_agu_mode_sp = AGU_BYPASS;
+
+/* Change mode of the USB for given direction */
+static u32 scc_agu_mode_usb = AGU_BYPASS;
+
+static union scc_softwareconfiguration scc_software_configuration[SCC_MAX];
+
+static u32 dma_fsm[4][4] = {
+	/* DMA_CMD_RESET  DMA_CMD_SETUP    DMA_CMD_START    DMA_CMD_STOP */
+	/* DMA_STATE_RESET */
+	{DMA_STATE_RESET, DMA_STATE_SETUP, DMA_STATE_ERROR, DMA_STATE_ERROR},
+	/* DMA_STATE_SETUP */
+	{DMA_STATE_RESET, DMA_STATE_SETUP, DMA_STATE_START, DMA_STATE_SETUP},
+	/* DMA_STATE_START */
+	{DMA_STATE_RESET, DMA_STATE_ERROR, DMA_STATE_START, DMA_STATE_SETUP},
+	/* DMA_STATE_ERROR */
+	{DMA_STATE_RESET, DMA_STATE_ERROR, DMA_STATE_ERROR, DMA_STATE_ERROR},
+};
+
+static void dma_state_process(struct scc_dma_state *dma_state, u32 cmd)
+{
+	dma_state->dma_status = dma_fsm[dma_state->dma_status][cmd];
+	dma_state->dma_cmd = cmd;
+}
+
+static void dma_state_process_dma_command(struct scc_dma_state *dma_state,
+					  u32 dma_cmd)
+{
+	dma_state->dma_cmd = dma_cmd;
+	switch (dma_cmd) {
+	case DMA_START:
+	case DMA_START_FH_RESET:
+		dma_state_process(dma_state, DMA_CMD_START);
+		break;
+	case DMA_STOP:
+		dma_state_process(dma_state, DMA_CMD_STOP);
+		break;
+	default:
+		break;
+	}
+}
+
+static void scc_takeover_dma(enum scc_id id, u32 dma_id, u32 drs)
+{
+	union scc_cmd dma_cmd;
+
+	dma_cmd.reg = 0;
+
+	/* Prepare the takeover for the DMA channel */
+	dma_cmd.bits.action = DMA_TAKEOVER;
+	dma_cmd.bits.id = dma_id;
+	dma_cmd.bits.rid = TO_DMA_CFG;	/* this is DMA_CFG register takeover */
+	if (drs == DMA_WRITE)
+		dma_cmd.bits.drs = DMA_WRITE;
+
+	reg_write(SCC_CMD(scc_descriptor_table[id].base_address), dma_cmd.reg);
+}
+
+int scc_dma_cmd(enum scc_id id, u32 cmd, u32 dma_id, u32 drs)
+{
+	union scc_cmd dma_cmd;
+	struct scc_dma_state *dma_state;
+
+	if ((id >= SCC_MAX) || (id < 0))
+		return -EINVAL;
+
+	dma_cmd.reg = 0;
+
+	/* Prepare the takeover for the DMA channel */
+	dma_cmd.bits.action = cmd;
+	dma_cmd.bits.id = dma_id;
+	if (drs == DMA_WRITE) {
+		dma_cmd.bits.drs = DMA_WRITE;
+		dma_state = &scc_state_wr[id][dma_id];
+	} else {
+		dma_state = &scc_state_rd[id][dma_id];
+	}
+
+	dma_state->scc_id = id;
+	dma_state->dma_id = dma_id;
+	dma_state_process_dma_command(dma_state, cmd);
+
+	reg_write(SCC_CMD(scc_descriptor_table[id].base_address), dma_cmd.reg);
+
+	return 0;
+}
+
+int scc_set_usb_address_generation_mode(u32 agu_mode)
+{
+	if (AGU_ACTIVE == agu_mode) {
+		/* Ensure both DMAs are stopped */
+		scc_dma_cmd(SCC_USB_RW, DMA_STOP, 0, DMA_WRITE);
+		scc_dma_cmd(SCC_USB_RW, DMA_STOP, 0, DMA_READ);
+	} else {
+		agu_mode = AGU_BYPASS;
+	}
+
+	scc_agu_mode_usb = agu_mode;
+
+	return 0;
+}
+
+int scc_setup_dma(enum scc_id id, u32 buffer_tag,
+		  u32 type, u32 fh_mode, u32 drs, u32 dma_id)
+{
+	struct scc_dma_state *dma_state;
+	int return_value = 0;
+	union scc_dma_cfg dma_cfg;
+	u32 *buffer_tag_list = scc_descriptor_table[id].buffer_tag_list;
+	u32 tag_count, t, t_valid;
+
+	if ((id >= SCC_MAX) || (id < 0))
+		return -EINVAL;
+
+	/* if the register is only configured by hw, cannot write! */
+	if (1 == scc_descriptor_table[id].hw_dma_cfg)
+		return -EACCES;
+
+	if (DMA_WRITE == drs) {
+		if (dma_id >= scc_descriptor_table[id].p_dma_channels_wr)
+			return -EINVAL;
+		dma_state = &scc_state_wr[id][dma_id];
+	} else {
+		if (dma_id >= scc_descriptor_table[id].p_dma_channels_rd)
+			return -EINVAL;
+		dma_state = &scc_state_rd[id][dma_id];
+	}
+
+	/* Compose the DMA configuration register */
+	tag_count = buffer_tag_list[0];
+	t_valid = 0;
+	for (t = 1; t <= tag_count; t++) {
+		if (buffer_tag == buffer_tag_list[t]) {
+			/* Tag found - validate */
+			t_valid = 1;
+			break;
+		}
+	}
+
+	if (!t_valid)
+		return -EACCES;
+
+	/*
+	 * Read the register first -- two functions write into the register
+	 * it does not make sense to read the DMA config back, because there
+	 * are two register configuration sets (drs)
+	 */
+	dma_cfg.reg = 0;
+	dma_cfg.bits.buffer_id = buffer_tag;
+	dma_state_process(dma_state, DMA_CMD_SETUP);
+
+	/*
+	 * This is Packet CFG set select - usable for TSIO, EBI and those SCCs
+	 * which habe 2 packet configs
+	 */
+	dma_cfg.bits.packet_cfg_id =
+		scc_software_configuration[id].bits.packet_select;
+
+	if (type == DMA_CYCLIC)
+		dma_cfg.bits.buffer_type = 1;
+	else
+		dma_cfg.bits.buffer_type = 0;
+
+	if (fh_mode == USE_FH)
+		dma_cfg.bits.fh_mode = 1;
+	else
+		dma_cfg.bits.fh_mode = 0;
+
+	if (id == SCC_CPU1_SPDMA_RW)
+		dma_cfg.bits.agu_mode = scc_agu_mode_sp;
+
+	if (id == SCC_USB_RW)
+		dma_cfg.bits.agu_mode = scc_agu_mode_usb;
+
+	reg_write(SCC_DMA_CFG(scc_descriptor_table[id].base_address),
+		  dma_cfg.reg);
+
+	/* The DMA_CFG needs a takeover! */
+	if (SCC_TO_IMMEDIATE == scc_takeover_mode)
+		scc_takeover_dma(id, dma_id, drs);
+
+	/* if (buffer_tag is not used) */
+	dma_state->buffer_tag = buffer_tag;
+
+	dma_state->scc_id = id;
+	dma_state->dma_id = dma_id;
+
+	return return_value;
+}
+
+int scc_enable(enum scc_id id, u32 value)
+{
+	if ((id >= SCC_MAX) || (id < 0))
+		return -EINVAL;
+
+	if (value == 0) {
+		scc_software_configuration[id].bits.enable_status = 0;
+	} else {
+		value = 1;
+		scc_software_configuration[id].bits.enable_status = 1;
+	}
+	reg_write(SCC_ENABLE(scc_descriptor_table[id].base_address), value);
+
+	return 0;
+}
+
+static inline void ehb(void)
+{
+	__asm__ __volatile__(
+		"	.set	mips32r2	\n"
+		"	ehb			\n"
+		"	.set	mips0		\n");
+}
+
+int scc_reset(enum scc_id id, u32 value)
+{
+	if ((id >= SCC_MAX) || (id < 0))
+		return -EINVAL;
+
+	/* Invert value to the strait logic from the negative hardware logic */
+	if (value == 0)
+		value = 1;
+	else
+		value = 0;
+
+	/* Write the value to the register */
+	reg_write(SCC_RESET(scc_descriptor_table[id].base_address), value);
+
+	/* sync flush */
+	asm("sync");	/* request bus write queue flush */
+	ehb();		/* wait until previous bus commit instr has finished */
+	asm("nop");	/* wait for flush to occur */
+	asm("nop");	/* wait for flush to occur */
+
+	udelay(100);
+
+	return 0;
+}
diff --git a/board/micronas/vct/scc.h b/board/micronas/vct/scc.h
new file mode 100644
index 0000000..8415167
--- /dev/null
+++ b/board/micronas/vct/scc.h
@@ -0,0 +1,205 @@
+/*
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SCC_H
+#define _SCC_H
+
+#define DMA_READ		0	/* SCC read  DMA		*/
+#define DMA_WRITE		1	/* SCC write DMA		*/
+
+#define DMA_LINEAR		0	/* DMA linear buffer access method */
+#define DMA_CYCLIC		1	/* DMA cyclic buffer access method */
+
+#define DMA_START		0	/* DMA command - start DMA	*/
+#define DMA_STOP		1	/* DMA command - stop  DMA	*/
+#define DMA_START_FH_RESET	2	/* DMA command - start DMA reset FH */
+#define DMA_TAKEOVER		15	/* DMA command - commit the DMA conf */
+
+#define AGU_ACTIVE		0	/* enable AGU address calculation */
+#define AGU_BYPASS		1	/* set AGU to bypass mode	*/
+
+#define USE_NO_FH		0	/* order the DMA to not use FH	*/
+#define USE_FH			1	/* order the DMA to work with FH*/
+
+#define SCC_DBG_IDLE		0	/* DEBUG status (idle interfaces) */
+#define SCC_DBG_SYNC_RES	0x0001	/* synchronuous reset		*/
+
+#define SCC_TO_IMMEDIATE	1	/* takeover command issued immediately*/
+#define TO_DMA_CFG		2	/* takeover command for the DMA config*/
+
+#define DMA_CMD_RESET		0
+#define DMA_CMD_SETUP		1
+#define DMA_CMD_START		2
+#define DMA_CMD_STOP		3
+
+#define DMA_STATE_RESET		0
+#define DMA_STATE_SETUP		1
+#define DMA_STATE_START		2
+#define DMA_STATE_ERROR		3
+
+#define SRMD			0
+#define STRM_D			1
+#define STRM_P			2
+
+/*
+ * Slowest Monterey domain is DVP 27 MHz (324/27 = 12; 12*16 = 192 CPU clocks)
+ */
+#define RESET_TIME		2	/* cycle calc see in SCC_Reset	*/
+
+struct scc_descriptor {
+	char *pu_name;		/* PU identifier			*/
+	char *scc_instance;	/* SCC Name				*/
+	u32 profile;		/* SCC VCI_D profile			*/
+
+	u32 base_address;	/* base address of the SCC unit reg shell*/
+
+	/* SCS Interconnect configuration */
+	u32 p_scc_id;		/* instance number of SCC unit		*/
+	u32 p_mci_id;		/* memory channel ID			*/
+
+	/* DMA Registers configuration */
+	u32 p_dma_channels_rd;	/* Number of Read DMA channels		*/
+	u32 p_dma_channels_wr;	/* Number of Write DMA channels		*/
+
+	u32 p_dma_packet_desc;	/* Number of packet descriptors		*/
+	u32 p_dma_mci_desc;	/* Number of MCI_CFG Descriptors	*/
+
+	int use_fh;		/* the flag tells if SCC uses an FH	*/
+
+	int p_si2ocp_id;	/* instance number of SI2OCP unit	*/
+	int hw_dma_cfg;		/* HW or SW DMA config flag		*/
+	int hw_dma_start;	/* HW or SW DMA start/stop flag		*/
+
+	u32 *buffer_tag_list;	/* list of the buffer tags available	*/
+	u32 *csize_list;	/* list of the valid CSIZE values	*/
+};
+
+struct scc_dma_state {
+	u32 scc_id:8;		/* SCC id				*/
+	u32 dma_id:8;		/* DMA id, used for match with array idx*/
+	u32 buffer_tag:8;	/* mem buf tag, assigned to this DMA	*/
+	u32 dma_status:2;	/* state of DMA, of the DMA_STATE_ const*/
+	u32 dma_drs:2;		/* DMA dir, either DMA_READ or DMA_WRITE*/
+	u32 dma_cmd:4;		/* last executed command on this DMA	*/
+};
+
+union scc_cmd {
+	u32 reg;
+	struct {
+		u32 res1:19;	/* reserved				*/
+		u32 drs:1;	/* DMA Register Set			*/
+		u32 rid:2;	/* Register Identifier			*/
+		u32 id:6;	/* DMA Identifier			*/
+		u32 action:4;	/* DMA Command encoding			*/
+	} bits;
+};
+
+union scc_dma_cfg {
+	u32 reg;
+	struct {
+		u32 res1:17;		/* reserved			*/
+		u32 agu_mode:1;		/* AGU Mode			*/
+		u32 res2:1;		/* reserved			*/
+		u32 fh_mode:1;		/* Fifo Handler			*/
+		u32 buffer_type:1;	/* Defines type of mem buffers	*/
+		u32 mci_cfg_id:1;	/* MCI_CFG register selector	*/
+		u32 packet_cfg_id:1;	/* PACKET_CFG register selector	*/
+		u32 buffer_id:8;	/* DMA Buffer Identifier	*/
+	} bits;
+};
+
+union scc_debug {
+	u32 reg;
+	struct {
+		u32 res1:20;	/* reserved				*/
+		u32 arg:8;	/* SCC Debug Command Argument (#)	*/
+		u32 cmd:4;	/* SCC Debug Command Register		*/
+	} bits;
+};
+
+union scc_softwareconfiguration {
+	u32 reg;
+	struct {
+		u32 res1:28;		/* reserved			*/
+		u32 clock_status:1;	/* clock on/off			*/
+		u32 packet_select:1;	/* active SCC packet id		*/
+		u32 enable_status:1;	/* enabled [1/0]		*/
+		u32 active_status:1;	/* 1=active  0=reset		*/
+	} bits;
+};
+
+/*
+ * System on Chip Channel ID
+ */
+enum scc_id {
+	SCC_NULL = -1,		/* illegal SCC identifier		*/
+	SCC_FE_3DCOMB_WR,	/* SCC_FE_3DCOMB Write channel		*/
+	SCC_FE_3DCOMB_RD,	/* SCC_FE_3DCOMB Read channel		*/
+	SCC_DI_TNR_WR,		/* SCC_DI_TNR Write channel		*/
+	SCC_DI_TNR_FIELD_RD,	/* SCC_DI_TNR_FIELD Read channel	*/
+	SCC_DI_TNR_FRAME_RD,	/* SCC_DI_TNR_FRAME Read channel	*/
+	SCC_DI_MVAL_WR,		/* SCC_DI_MVAL Write channel		*/
+	SCC_DI_MVAL_RD,		/* SCC_DI_MVAL Read channel		*/
+	SCC_RC_FRAME_WR,	/* SCC_RC_FRAME Write channel		*/
+	SCC_RC_FRAME0_RD,	/* SCC_RC_FRAME0 Read channel		*/
+	SCC_OPT_FIELD0_RD,	/* SCC_OPT_FIELD0 Read channel		*/
+	SCC_OPT_FIELD1_RD,	/* SCC_OPT_FIELD1 Read channel		*/
+	SCC_OPT_FIELD2_RD,	/* SCC_OPT_FIELD2 Read channel		*/
+	SCC_PIP_FRAME_WR,	/* SCC_PIP_FRAME Write channel		*/
+	SCC_PIP_FRAME_RD,	/* SCC_PIP_FRAME Read channel		*/
+	SCC_DP_AGPU_RD,		/* SCC_DP_AGPU Read channel		*/
+	SCC_EWARP_RW,		/* SCC_EWARP Read/Write channel		*/
+	SCC_DP_OSD_RD,		/* SCC_DP_OSD Read channel		*/
+	SCC_DP_GRAPHIC_RD,	/* SCC_DP_GRAPHIC Read channel		*/
+	SCC_DVP_OSD_RD,		/* SCC_DVP_OSD Read channel		*/
+	SCC_DVP_VBI_RD,		/* SCC_DVP_VBI Read channel		*/
+	SCC_TSIO_WR,		/* SCC_TSIO Write channel		*/
+	SCC_TSIO_RD,		/* SCC_TSIO Read channel		*/
+	SCC_TSD_WR,		/* SCC_TSD Write channel		*/
+	SCC_VD_UD_ST_RW,	/* SCC_VD_UD_ST Read/Write channel	*/
+	SCC_VD_FRR_RD,		/* SCC_VD_FRR Read channel		*/
+	SCC_VD_FRW_DISP_WR,	/* SCC_VD_FRW_DISP Write channel	*/
+	SCC_MR_VD_M_Y_RD,	/* SCC_MR_VD_M_Y Read channel		*/
+	SCC_MR_VD_M_C_RD,	/* SCC_MR_VD_M_C Read channel		*/
+	SCC_MR_VD_S_Y_RD,	/* SCC_MR_VD_S_Y Read channel		*/
+	SCC_MR_VD_S_C_RD,	/* SCC_MR_VD_S_C Read channel		*/
+	SCC_GA_WR,		/* SCC_GA Write channel			*/
+	SCC_GA_SRC1_RD,		/* SCC_GA_SRC1 Read channel		*/
+	SCC_GA_SRC2_RD,		/* SCC_GA_SRC2 Read channel		*/
+	SCC_AD_RD,		/* SCC_AD Read channel			*/
+	SCC_AD_WR,		/* SCC_AD Write channel			*/
+	SCC_ABP_RD,		/* SCC_ABP Read channel			*/
+	SCC_ABP_WR,		/* SCC_ABP Write channel		*/
+	SCC_EBI_RW,		/* SCC_EBI Read/Write channel		*/
+	SCC_USB_RW,		/* SCC_USB Read/Write channel		*/
+	SCC_CPU1_SPDMA_RW,	/* SCC_CPU1_SPDMA Read/Write channel	*/
+	SCC_CPU1_BRIDGE_RW,	/* SCC_CPU1_BRIDGE Read/Write channel	*/
+	SCC_MAX			/* maximum limit on the SCC id		*/
+};
+
+int scc_set_usb_address_generation_mode(u32 agu_mode);
+int scc_dma_cmd(enum scc_id id, u32 cmd, u32 dma_id, u32 drs);
+int scc_setup_dma(enum scc_id id, u32 buffer_tag,
+		  u32 type, u32 fh_mode, u32 drs, u32 dma_id);
+int scc_enable(enum scc_id id, u32 value);
+int scc_reset(enum scc_id id, u32 value);
+
+#endif /* _SCC_H */
diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c
new file mode 100644
index 0000000..2bc7ad4
--- /dev/null
+++ b/board/micronas/vct/smc_eeprom.c
@@ -0,0 +1,394 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright 2005, Seagate Technology LLC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#undef DEBUG
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+
+#include "vct.h"
+
+#define SMSC9118_BASE		CONFIG_DRIVER_SMC911X_BASE
+#define BYTE_TEST		(SMSC9118_BASE + 0x64)
+#define GPIO_CFG		(SMSC9118_BASE + 0x88)
+#define MAC_CSR_CMD		(SMSC9118_BASE + 0xA4)
+#define  MAC_CSR_CMD_CSR_BUSY	(0x80000000)
+#define  MAC_CSR_CMD_RNW	(0x40000000)
+#define  MAC_RD_CMD(reg)	((reg & 0x000000FF) |			\
+				 (MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_RNW))
+#define  MAC_WR_CMD(reg)	((reg & 0x000000FF) |		\
+				 (MAC_CSR_CMD_CSR_BUSY))
+#define MAC_CSR_DATA		(SMSC9118_BASE + 0xA8)
+#define E2P_CMD			(SMSC9118_BASE + 0xB0)
+#define  E2P_CMD_EPC_BUSY_	(0x80000000UL)	/* Self Clearing */
+#define  E2P_CMD_EPC_CMD_	(0x70000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_READ_	(0x00000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_EWDS_	(0x10000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_EWEN_	(0x20000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_WRITE_	(0x30000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_WRAL_	(0x40000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_ERASE_	(0x50000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_ERAL_	(0x60000000UL)	/* R/W */
+#define  E2P_CMD_EPC_CMD_RELOAD_ (0x70000000UL)	/* R/W */
+#define  E2P_CMD_EPC_TIMEOUT_	(0x00000200UL)	/* R */
+#define  E2P_CMD_MAC_ADDR_LOADED_ (0x00000100UL) /* RO */
+#define  E2P_CMD_EPC_ADDR_	(0x000000FFUL)	/* R/W */
+#define E2P_DATA		(SMSC9118_BASE + 0xB4)
+
+#define MAC_ADDRH		(0x2)
+#define MAC_ADDRL		(0x3)
+
+#define MAC_TIMEOUT		200
+
+#define HIBYTE(word)		((u8)(((u16)(word)) >> 8))
+#define LOBYTE(word)		((u8)(((u16)(word)) & 0x00FFU))
+#define HIWORD(dword)		((u16)(((u32)(dword)) >> 16))
+#define LOWORD(dword)		((u16)(((u32)(dword)) & 0x0000FFFFUL))
+
+static int mac_busy(int req_to)
+{
+	int timeout = req_to;
+
+	while (timeout--) {
+		if (!(smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY))
+			goto done;
+	}
+	return 1;		/* Timeout */
+
+done:
+	return 0;		/* No timeout */
+}
+
+static ulong get_mac_reg(int reg)
+{
+	ulong reg_val = 0xffffffff;
+
+	if (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) {
+		printf("get_mac_reg: previous command not complete\n");
+		goto done;
+	}
+
+	smc911x_reg_write(MAC_CSR_CMD, MAC_RD_CMD(reg));
+	udelay(10000);
+
+	if (mac_busy(MAC_TIMEOUT) == 1) {
+		printf("get_mac_reg: timeout waiting for response from MAC\n");
+		goto done;
+	}
+
+	reg_val = smc911x_reg_read(MAC_CSR_DATA);
+
+done:
+	return (reg_val);
+}
+
+static ulong eeprom_enable_access(void)
+{
+	ulong gpio;
+
+	gpio = smc911x_reg_read(GPIO_CFG);
+	debug("%s: gpio= 0x%08lx ---> 0x%08lx\n", __func__, gpio,
+	      (gpio & 0xFF0FFFFFUL));
+
+	smc911x_reg_write(GPIO_CFG, (gpio & 0xFF0FFFFFUL));
+	return gpio;
+}
+
+static void eeprom_disable_access(ulong gpio)
+{
+	debug("%s: gpio= 0x%08lx\n", __func__, gpio);
+	smc911x_reg_write(GPIO_CFG, gpio);
+}
+
+static int eeprom_is_mac_address_loaded(void)
+{
+	int ret;
+
+	ret = smc911x_reg_read(MAC_CSR_CMD) & E2P_CMD_MAC_ADDR_LOADED_;
+	debug("%s: ret = %x\n", __func__, ret);
+
+	return ret;
+}
+
+static int eeprom_read_location(unchar address, u8 *data)
+{
+	ulong timeout = 100000;
+	ulong temp = 0;
+
+	if ((temp = smc911x_reg_read(E2P_CMD)) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start, E2P_CMD=0x%08lX\n", __func__, temp);
+		return 0;
+	}
+
+	smc911x_reg_write(E2P_CMD,
+			  (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_ |
+			   ((ulong) address)));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		printf("Timeout\n");
+		return 0;
+	}
+	(*data) = (unchar) (smc911x_reg_read(E2P_DATA));
+	debug("%s: ret = %x\n", __func__, (*data));
+
+	return 1;
+}
+
+static int eeprom_enable_erase_and_write(void)
+{
+	ulong timeout = 100000;
+
+	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start\n", __func__);
+		return 0;
+	}
+	smc911x_reg_write(E2P_CMD, (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		printf("Timeout[1]\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int eeprom_disable_erase_and_write(void)
+{
+	ulong timeout = 100000;
+
+	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start\n", __func__);
+		return 0;
+	}
+	smc911x_reg_write(E2P_CMD, (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWDS_));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		printf("Timeout[2]\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int eeprom_write_location(unchar address, unchar data)
+{
+	ulong timeout = 100000;
+
+	debug("%s: address: %x data = %x\n", __func__, address, data);
+
+	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start\n", __func__);
+		return 0;
+	}
+
+	smc911x_reg_write(E2P_DATA, ((ulong) data));
+	smc911x_reg_write(E2P_CMD,
+			  (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_ |
+			   ((ulong) address)));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		printf("Timeout[3]\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int eeprom_erase_all(void)
+{
+	ulong timeout = 100000;
+
+	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start\n", __func__);
+		return 0;
+	}
+
+	smc911x_reg_write(E2P_CMD, (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_ERAL_));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		printf("Timeout[4]\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+static int eeprom_reload(void)
+{
+	ulong timeout = 100000;
+
+	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+		printf("%s: Busy at start\n", __func__);
+		return -1;
+	}
+	smc911x_reg_write(E2P_CMD,
+			  (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_RELOAD_));
+
+	while ((timeout > 0) && (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY_)) {
+		udelay(10);
+		timeout--;
+	}
+
+	if (timeout == 0)
+		return 0;
+
+	return 1;
+}
+
+static int eeprom_save_mac_address(ulong dwHi16, ulong dwLo32)
+{
+	int result = 0;
+
+	debug("%s: dwHI: 0x%08lx dwLO: %08lx, \n", __func__, dwHi16, dwLo32);
+
+	if (!eeprom_enable_erase_and_write())
+		goto DONE;
+	if (!eeprom_erase_all())
+		goto DONE;
+	if (!eeprom_write_location(0, 0xA5))
+		goto DONE;
+	if (!eeprom_write_location(1, LOBYTE(LOWORD(dwLo32))))
+		goto DONE;
+	if (!eeprom_write_location(2, HIBYTE(LOWORD(dwLo32))))
+		goto DONE;
+	if (!eeprom_write_location(3, LOBYTE(HIWORD(dwLo32))))
+		goto DONE;
+	if (!eeprom_write_location(4, HIBYTE(HIWORD(dwLo32))))
+		goto DONE;
+	if (!eeprom_write_location(5, LOBYTE(LOWORD(dwHi16))))
+		goto DONE;
+	if (!eeprom_write_location(6, HIBYTE(LOWORD(dwHi16))))
+		goto DONE;
+	if (!eeprom_disable_erase_and_write())
+		goto DONE;
+
+	result = 1;
+
+DONE:
+	return result;
+}
+
+static int do_eeprom_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unchar data = 0, index = 0;
+	ulong gpio_old_val;
+
+	gpio_old_val = eeprom_enable_access();
+
+	printf("EEPROM content: \n");
+	for (index = 0; index < 8; index++) {
+		if (eeprom_read_location(index, &data))
+			printf("%02x ", data);
+		else
+			printf("FAILED");
+	}
+
+	eeprom_disable_access(gpio_old_val);
+	printf("\n");
+
+	return 0;
+}
+
+static int do_eeprom_erase_all(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	eeprom_erase_all();
+
+	return 0;
+}
+
+static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong hi16, lo32;
+	unchar ethaddr[6], i;
+	ulong gpio;
+	char *tmp, *end;
+
+	tmp = argv[1];
+	for (i = 0; i < 6; i++) {
+		ethaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+		if (tmp)
+			tmp = (*end) ? end + 1 : end;
+	}
+
+	hi16 = (ethaddr[5] << 8) | (ethaddr[4]);
+	lo32 = (ethaddr[3] << 24) | (ethaddr[2] << 16) |
+		(ethaddr[1] << 8) | (ethaddr[0]);
+
+	gpio = eeprom_enable_access();
+
+	eeprom_save_mac_address(hi16, lo32);
+
+	eeprom_reload();
+
+	/* Check new values */
+	if (eeprom_is_mac_address_loaded()) {
+		ulong mac_hi16, mac_lo32;
+
+		mac_hi16 = get_mac_reg(MAC_ADDRH);
+		mac_lo32 = get_mac_reg(MAC_ADDRL);
+		printf("New MAC address: %lx, %lx\n", mac_hi16, mac_lo32);
+	} else {
+		printf("Address is not reloaded \n");
+	}
+	eeprom_disable_access(gpio);
+
+	return 0;
+}
+
+U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all,
+	   "smcee   - Erase content of SMC EEPROM\n",);
+
+U_BOOT_CMD(smced, 1, 0, do_eeprom_dump,
+	   "smced   - Dump content of SMC EEPROM\n",);
+
+U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac,
+	   "smcew   - Write MAC address to SMC EEPROM\n",
+	   "aa:bb:cc:dd:ee:ff  new mac address\n");
diff --git a/board/micronas/vct/top.c b/board/micronas/vct/top.c
new file mode 100644
index 0000000..0923954
--- /dev/null
+++ b/board/micronas/vct/top.c
@@ -0,0 +1,289 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "vct.h"
+
+typedef union _TOP_PINMUX_t
+{
+	u32 reg;
+	struct {
+		u32 res		: 24;   /* reserved		*/
+		u32 drive	:  2;   /* Driver strength	*/
+		u32 slew	:  1;   /* Slew rate		*/
+		u32 strig	:  1;   /* Schmitt trigger input*/
+		u32 pu_pd	:  2;   /* Pull up/ pull down	*/
+		u32 funsel	:  2;   /* Pin function		*/
+	} Bits;
+} TOP_PINMUX_t;
+
+#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+
+static TOP_PINMUX_t top_read_pin(int pin)
+{
+	TOP_PINMUX_t reg;
+
+	switch (pin) {
+	case 2:
+	case 3:
+	case 6:
+	case 9:
+		reg.reg = 0xdeadbeef;
+		break;
+	case 4:
+		reg.reg = reg_read(FWSRAM_TOP_SCL_CFG(FWSRAM_BASE));
+		break;
+	case 5:
+		reg.reg = reg_read(FWSRAM_TOP_SDA_CFG(FWSRAM_BASE));
+		break;
+	case 7:
+		reg.reg = reg_read(FWSRAM_TOP_TDO_CFG(FWSRAM_BASE));
+		break;
+	case 8:
+		reg.reg = reg_read(FWSRAM_TOP_GPIO2_0_CFG(FWSRAM_BASE));
+		break;
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+		reg.reg = reg_read(FWSRAM_BASE + FWSRAM_TOP_GPIO2_1_CFG_OFFS +
+				   ((pin - 10) * 4));
+		break;
+	default:
+		reg.reg = reg_read(TOP_BASE + (pin * 4));
+		break;
+	}
+
+	return reg;
+}
+
+static void top_write_pin(int pin, TOP_PINMUX_t reg)
+{
+
+	switch (pin) {
+	case 4:
+		reg_write(FWSRAM_TOP_SCL_CFG(FWSRAM_BASE), reg.reg);
+		break;
+	case 5:
+		reg_write(FWSRAM_TOP_SDA_CFG(FWSRAM_BASE), reg.reg);
+		break;
+	case 7:
+		reg_write(FWSRAM_TOP_TDO_CFG(FWSRAM_BASE), reg.reg);
+		break;
+	case 8:
+		reg_write(FWSRAM_TOP_GPIO2_0_CFG(FWSRAM_BASE), reg.reg);
+		break;
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+		reg_write(FWSRAM_BASE + FWSRAM_TOP_GPIO2_1_CFG_OFFS +
+			  ((pin - 10) * 4), reg.reg);
+		break;
+	default:
+		reg_write(TOP_BASE + (pin * 4), reg.reg);
+		break;
+	}
+}
+
+int top_set_pin(int pin, int func)
+{
+	TOP_PINMUX_t reg;
+
+	/* check global range */
+	if ((pin < 0) || (pin > 170) || (func < 0) || (func > 3))
+		return -1;  /* pin number or function out of valid range */
+
+	/* check undefined values; */
+	if ((pin == 2) || (pin == 3) || (pin == 6) || (pin == 9))
+		return -1;  /* pin number out of valid range */
+
+	reg = top_read_pin(pin);
+	reg.Bits.funsel = func;
+	top_write_pin(pin, reg);
+
+	return 0;
+}
+
+#endif
+
+#if defined(CONFIG_VCT_PLATINUMAVC)
+
+int top_set_pin(int pin, int func)
+{
+	TOP_PINMUX_t reg;
+
+	/* check global range */
+	if ((pin < 0) || (pin > 158))
+		return -1;	/* pin number or function out of valid range */
+
+	reg.reg = reg_read(TOP_BASE + (pin * 4));
+	reg.Bits.funsel = func;
+	reg_write(TOP_BASE + (pin * 4), reg.reg);
+
+	return 0;
+}
+
+#endif
+
+void vct_pin_mux_initialize(void)
+{
+#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+	top_set_pin(34, 01);	/* EBI_CS0	*/
+	top_set_pin(33, 01);	/* EBI_CS1	*/
+	top_set_pin(32, 01);	/* EBI_CS2	*/
+	top_set_pin(100, 02);	/* EBI_CS3	*/
+	top_set_pin(101, 02);	/* EBI_CS4	*/
+	top_set_pin(102, 02);	/* EBI_CS5	*/
+	top_set_pin(103, 02);	/* EBI_CS6	*/
+	top_set_pin(104, 02);	/* EBI_CS7	top_set_pin(104,03); EBI_GENIO3 */
+	top_set_pin(35, 01);	/* EBI_ALE	*/
+	top_set_pin(36, 01);	/* EBI_ADDR15	*/
+	top_set_pin(37, 01);	/* EBI_ADDR14	top_set_pin(78,03); EBI_ADDR14 */
+	top_set_pin(38, 01);	/* EBI_ADDR13	*/
+	top_set_pin(39, 01);	/* EBI_ADDR12	*/
+	top_set_pin(40, 01);	/* EBI_ADDR11	*/
+	top_set_pin(41, 01);	/* EBI_ADDR10	*/
+	top_set_pin(42, 01);	/* EBI_ADDR9	*/
+	top_set_pin(43, 01);	/* EBI_ADDR8	*/
+	top_set_pin(44, 01);	/* EBI_ADDR7	*/
+	top_set_pin(45, 01);	/* EBI_ADDR6	*/
+	top_set_pin(46, 01);	/* EBI_ADDR5	*/
+	top_set_pin(47, 01);	/* EBI_ADDR4	*/
+	top_set_pin(48, 01);	/* EBI_ADDR3	*/
+	top_set_pin(49, 01);	/* EBI_ADDR2	*/
+	top_set_pin(50, 01);	/* EBI_ADDR1	*/
+	top_set_pin(51, 01);	/* EBI_ADDR0	*/
+	top_set_pin(52, 01);	/* EBI_DIR	*/
+	top_set_pin(53, 01);	/* EBI_DAT15	top_set_pin(81,01); EBI_DAT15 */
+	top_set_pin(54, 01);	/* EBI_DAT14	top_set_pin(82,01); EBI_DAT14 */
+	top_set_pin(55, 01);	/* EBI_DAT13	top_set_pin(83,01); EBI_DAT13 */
+	top_set_pin(56, 01);	/* EBI_DAT12	top_set_pin(84,01); EBI_DAT12 */
+	top_set_pin(57, 01);	/* EBI_DAT11	top_set_pin(85,01); EBI_DAT11 */
+	top_set_pin(58, 01);	/* EBI_DAT10	top_set_pin(86,01); EBI_DAT10 */
+	top_set_pin(59, 01);	/* EBI_DAT9	top_set_pin(87,01); EBI_DAT9 */
+	top_set_pin(60, 01);	/* EBI_DAT8	top_set_pin(88,01); EBI_DAT8 */
+	top_set_pin(61, 01);	/* EBI_DAT7	*/
+	top_set_pin(62, 01);	/* EBI_DAT6	*/
+	top_set_pin(63, 01);	/* EBI_DAT5	*/
+	top_set_pin(64, 01);	/* EBI_DAT4	*/
+	top_set_pin(65, 01);	/* EBI_DAT3	*/
+	top_set_pin(66, 01);	/* EBI_DAT2	*/
+	top_set_pin(67, 01);	/* EBI_DAT1	*/
+	top_set_pin(68, 01);	/* EBI_DAT0	*/
+	top_set_pin(69, 01);	/* EBI_IORD	*/
+	top_set_pin(70, 01);	/* EBI_IOWR	*/
+	top_set_pin(71, 01);	/* EBI_WE	*/
+	top_set_pin(72, 01);	/* EBI_OE	*/
+	top_set_pin(73, 01);	/* EBI_IORDY	*/
+	top_set_pin(95, 02);	/* EBI_EBI_DMACK*/
+	top_set_pin(112, 02);	/* EBI_IRQ0	*/
+	top_set_pin(111, 02);	/* EBI_IRQ1	top_set_pin(111,03); EBI_DMARQ */
+	top_set_pin(107, 02);	/* EBI_IRQ2	*/
+	top_set_pin(108, 02);	/* EBI_IRQ3	*/
+	top_set_pin(30, 01);	/* EBI_GENIO1   top_set_pin(99,03); EBI_GENIO1 */
+	top_set_pin(31, 01);	/* EBI_GENIO2   top_set_pin(98,03); EBI_GENIO2 */
+	top_set_pin(105, 02);	/* EBI_GENIO3   top_set_pin(104,03); EBI_GENIO3 */
+	top_set_pin(106, 02);	/* EBI_GENIO4   top_set_pin(144,02); EBI_GENIO4 */
+	top_set_pin(109, 02);	/* EBI_GENIO5   top_set_pin(142,02); EBI_GENIO5 */
+	top_set_pin(110, 02);	/* EBI_BURST_CLK	*/
+#endif
+
+#if defined(CONFIG_VCT_PLATINUMAVC)
+	top_set_pin(19, 01);	/* EBI_CS0	*/
+	top_set_pin(18, 01);	/* EBI_CS1	*/
+	top_set_pin(17, 01);	/* EBI_CS2	*/
+	top_set_pin(92, 02);	/* EBI_CS3	*/
+	top_set_pin(93, 02);	/* EBI_CS4	*/
+	top_set_pin(95, 02);	/* EBI_CS6	*/
+	top_set_pin(96, 02);	/* EBI_CS7	top_set_pin(104,03); EBI_GENIO3 */
+	top_set_pin(20, 01);	/* EBI_ALE	*/
+	top_set_pin(21, 01);	/* EBI_ADDR15	*/
+	top_set_pin(22, 01);	/* EBI_ADDR14	top_set_pin(78,03); EBI_ADDR14 */
+	top_set_pin(23, 01);	/* EBI_ADDR13	*/
+	top_set_pin(24, 01);	/* EBI_ADDR12	*/
+	top_set_pin(25, 01);	/* EBI_ADDR11	*/
+	top_set_pin(26, 01);	/* EBI_ADDR10	*/
+	top_set_pin(27, 01);	/* EBI_ADDR9	*/
+	top_set_pin(28, 01);	/* EBI_ADDR8	*/
+	top_set_pin(29, 01);	/* EBI_ADDR7	*/
+	top_set_pin(30, 01);	/* EBI_ADDR6	*/
+	top_set_pin(31, 01);	/* EBI_ADDR5	*/
+	top_set_pin(32, 01);	/* EBI_ADDR4	*/
+	top_set_pin(33, 01);	/* EBI_ADDR3	*/
+	top_set_pin(34, 01);	/* EBI_ADDR2	*/
+	top_set_pin(35, 01);	/* EBI_ADDR1	*/
+	top_set_pin(36, 01);	/* EBI_ADDR0	*/
+	top_set_pin(37, 01);	/* EBI_DIR	*/
+	top_set_pin(38, 01);	/* EBI_DAT15	top_set_pin(81,01); EBI_DAT15 */
+	top_set_pin(39, 01);	/* EBI_DAT14	top_set_pin(82,01); EBI_DAT14 */
+	top_set_pin(40, 01);	/* EBI_DAT13	top_set_pin(83,01); EBI_DAT13 */
+	top_set_pin(41, 01);	/* EBI_DAT12	top_set_pin(84,01); EBI_DAT12 */
+	top_set_pin(42, 01);	/* EBI_DAT11	top_set_pin(85,01); EBI_DAT11 */
+	top_set_pin(43, 01);	/* EBI_DAT10	top_set_pin(86,01); EBI_DAT10 */
+	top_set_pin(44, 01);	/* EBI_DAT9	top_set_pin(87,01); EBI_DAT9 */
+	top_set_pin(45, 01);	/* EBI_DAT8	top_set_pin(88,01); EBI_DAT8 */
+	top_set_pin(46, 01);	/* EBI_DAT7	*/
+	top_set_pin(47, 01);	/* EBI_DAT6	*/
+	top_set_pin(48, 01);	/* EBI_DAT5	*/
+	top_set_pin(49, 01);	/* EBI_DAT4	*/
+	top_set_pin(50, 01);	/* EBI_DAT3	*/
+	top_set_pin(51, 01);	/* EBI_DAT2	*/
+	top_set_pin(52, 01);	/* EBI_DAT1	*/
+	top_set_pin(53, 01);	/* EBI_DAT0	*/
+	top_set_pin(54, 01);	/* EBI_IORD	*/
+	top_set_pin(55, 01);	/* EBI_IOWR	*/
+	top_set_pin(56, 01);	/* EBI_WE	*/
+	top_set_pin(57, 01);	/* EBI_OE	*/
+	top_set_pin(58, 01);	/* EBI_IORDY	*/
+	top_set_pin(87, 02);	/* EBI_EBI_DMACK*/
+	top_set_pin(106, 02);	/* EBI_IRQ0	*/
+	top_set_pin(105, 02);	/* EBI_IRQ1	top_set_pin(111,03); EBI_DMARQ */
+	top_set_pin(101, 02);	/* EBI_IRQ2	*/
+	top_set_pin(102, 02);	/* EBI_IRQ3	*/
+	top_set_pin(15, 01);	/* EBI_GENIO1   top_set_pin(99,03); EBI_GENIO1 */
+	top_set_pin(16, 01);	/* EBI_GENIO2   top_set_pin(98,03); EBI_GENIO2 */
+	top_set_pin(99, 02);	/* EBI_GENIO3   top_set_pin(104,03); EBI_GENIO3 */
+	top_set_pin(100, 02);	/* EBI_GENIO4   top_set_pin(144,02); EBI_GENIO4 */
+	top_set_pin(103, 02);	/* EBI_GENIO5   top_set_pin(142,02); EBI_GENIO5 */
+	top_set_pin(104, 02);	/* EBI_BURST_CLK	*/
+#endif
+
+	/* I2C: Configure I2C-2 as GPIO to enable soft-i2c */
+	top_set_pin(0, 2);	/* SCL2 on GPIO 11 */
+	top_set_pin(1, 2);	/* SDA2 on GPIO 10 */
+
+	/* UART pins */
+#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+	top_set_pin(141, 1);
+	top_set_pin(143, 1);
+#endif
+#if defined(CONFIG_VCT_PLATINUMAVC)
+	top_set_pin(107, 1);
+	top_set_pin(109, 1);
+#endif
+}
diff --git a/board/micronas/vct/u-boot.lds b/board/micronas/vct/u-boot.lds
new file mode 100644
index 0000000..da9e605
--- /dev/null
+++ b/board/micronas/vct/u-boot.lds
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	. = ALIGN(4);
+	.sdata  : { *(.sdata) }
+
+	. = ALIGN(4);
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
+
+	. = ALIGN(4);
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss (NOLOAD)  : { *(.sbss) }
+	. = ALIGN(4);
+	.bss (NOLOAD)  : { *(.bss) }
+	uboot_end = .;
+}
diff --git a/board/micronas/vct/vct.c b/board/micronas/vct/vct.c
new file mode 100644
index 0000000..d320e0b
--- /dev/null
+++ b/board/micronas/vct/vct.c
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/mipsregs.h>
+#include "vct.h"
+
+#if defined(CONFIG_VCT_PREMIUM)
+#define BOARD_NAME	"PremiumD"
+#elif defined(CONFIG_VCT_PLATINUM)
+#define BOARD_NAME	"PlatinumD"
+#elif defined(CONFIG_VCT_PLATINUMAVC)
+#define BOARD_NAME	"PlatinumAVC"
+#else
+#error "vct: No board variant defined!"
+#endif
+
+#if defined(CONFIG_VCT_ONENAND)
+#define BOARD_NAME_ADD	" OneNAND"
+#else
+#define BOARD_NAME_ADD	" NOR"
+#endif
+
+int board_early_init_f(void)
+{
+	/*
+	 * First initialize the PIN mulitplexing
+	 */
+	vct_pin_mux_initialize();
+
+	/*
+	 * Init the EBI very early so that FLASH can be accessed
+	 */
+	ebi_initialize();
+
+	return 0;
+}
+
+void _machine_restart(void)
+{
+	reg_write(DCGU_EN_WDT_RESET(DCGU_BASE), DCGU_MAGIC_WDT);
+	reg_write(WDT_TORR(WDT_BASE), 0x00);
+	reg_write(WDT_CR(WDT_BASE), 0x1D);
+
+	/*
+	 * Now wait for the watchdog to trigger the reset
+	 */
+	udelay(1000000);
+}
+
+/*
+ * SDRAM is already configured by the bootstrap code, only return the
+ * auto-detected size here
+ */
+phys_size_t initdram(int board_type)
+{
+	return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+			    CONFIG_SYS_MBYTES_SDRAM << 20);
+}
+
+int checkboard(void)
+{
+	u32 config0 = read_c0_prid();
+	char *s = getenv("serial#");
+
+	if ((config0 & 0xff0000) == PRID_COMP_LEGACY
+	    && (config0 & 0xff00) == PRID_IMP_LX4280) {
+		puts("Board: MDED \n");
+		printf("CPU:   LX4280 id: 0x%02x, rev: 0x%02x\n",
+		       (config0 >> 8) & 0xFF, config0 & 0xFF);
+	} else if ((config0 & 0xff0000) == PRID_COMP_MIPS
+		   && (config0 & 0xff00) == PRID_IMP_VGC) {
+		u32 jedec_id = *((u32 *) 0xBEBC71A0);
+		if ((((jedec_id) >> 12) & 0xFF) == 0x40) {
+			puts("Board: VGCA \n");
+		} else if ((((jedec_id) >> 12) & 0xFF) == 0x48
+			   || (((jedec_id) >> 12) & 0xFF) == 0x49) {
+			puts("Board: VGCB \n");
+		}
+		printf("CPU:   MIPS 4K id: 0x%02x, rev: 0x%02x\n",
+		       (config0 >> 8) & 0xFF, config0 & 0xFF);
+	} else if (config0 == 0x19378) {
+		printf("CPU:   MIPS 24K id: 0x%02x, rev: 0x%02x\n",
+		       (config0 >> 8) & 0xFF, config0 & 0xFF);
+	} else {
+		printf("Unsupported cpu %d, proc_id=0x%x\n", config0 >> 24,
+		       config0);
+	}
+
+	printf("Board: Micronas VCT " BOARD_NAME BOARD_NAME_ADD);
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return 0;
+}
diff --git a/board/micronas/vct/vct.h b/board/micronas/vct/vct.h
new file mode 100644
index 0000000..f1a4851
--- /dev/null
+++ b/board/micronas/vct/vct.h
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/io.h>
+
+#include "bcu.h"
+#include "dcgu.h"
+#include "ebi.h"
+#include "scc.h"
+
+#ifdef CONFIG_VCT_PREMIUM
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR	0xbf800000
+#define TOP_BASE		0x000c8000
+
+#include "vcth/reg_ebi.h"
+#include "vcth/reg_dcgu.h"
+#include "vcth/reg_wdt.h"
+#include "vcth/reg_gpio.h"
+#include "vcth/reg_fwsram.h"
+#include "vcth/reg_scc.h"
+#include "vcth/reg_usbh.h"
+#endif
+
+#ifdef CONFIG_VCT_PLATINUM
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR	0xbf800000
+#define TOP_BASE		0x000c8000
+
+#include "vcth2/reg_ebi.h"
+#include "vcth/reg_dcgu.h"
+#include "vcth/reg_wdt.h"
+#include "vcth/reg_gpio.h"
+#include "vcth/reg_fwsram.h"
+#include "vcth/reg_scc.h"
+#include "vcth/reg_usbh.h"
+#endif
+
+#ifdef CONFIG_VCT_PLATINUMAVC
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR	0xbdc00000
+#define TOP_BASE		0x00050000
+
+#include "vctv/reg_ebi.h"
+#include "vctv/reg_dcgu.h"
+#include "vctv/reg_wdt.h"
+#include "vctv/reg_gpio.h"
+#endif
+
+#ifndef _VCT_H
+#define _VCT_H
+
+/*
+ * Defines
+ */
+#define PRID_COMP_LEGACY	0x000000
+#define PRID_COMP_MIPS		0x010000
+#define PRID_IMP_LX4280		0xc200
+#define PRID_IMP_VGC		0x9000
+
+/*
+ * Prototypes
+ */
+int ebi_initialize(void);
+int ebi_init_nor_flash(void);
+int ebi_init_onenand(void);
+int ebi_init_smc911x(void);
+u32 smc911x_reg_read(u32 addr);
+void smc911x_reg_write(u32 addr, u32 data);
+int top_set_pin(int pin, int func);
+void vct_pin_mux_initialize(void);
+
+/*
+ * static inlines
+ */
+static inline void reg_write(u32 addr, u32 data)
+{
+	__raw_writel(data, addr + REG_GLOBAL_START_ADDR);
+}
+
+static inline u32 reg_read(u32 addr)
+{
+	return __raw_readl(addr + REG_GLOBAL_START_ADDR);
+}
+
+#endif /* _VCT_H */