Merge with /home/wd/git/u-boot/custodian/u-boot-coldfire

5 files changed, 365 insertions, 382 deletions

diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile
index cf07cf4..2ec71ee 100644
--- a/board/m5282evb/Makefile
+++ b/board/m5282evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o
+COBJS	= $(BOARD).o mii.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/m5282evb/config.mk b/board/m5282evb/config.mk
index 8484307..0aa2361 100644
--- a/board/m5282evb/config.mk
+++ b/board/m5282evb/config.mk
@@ -22,4 +22,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0x20000
+TEXT_BASE = 0xFFE00000
diff --git a/board/m5282evb/flash.c b/board/m5282evb/flash.c
deleted file mode 100644
index 36a7c31..0000000
--- a/board/m5282evb/flash.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define PHYS_FLASH_1 CFG_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (AMD_ID_PL160CB & FLASH_TYPEMASK):
-		printf ("AM29PL160CB (16Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-      Done:
-	return;
-}
-
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(AMD_MANUFACT & FLASH_VENDMASK) |
-			(AMD_ID_PL160CB & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured to many flash banks!\n");
-
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			if (j == 0) {
-				/* 1st is 16 KiB */
-				flash_info[i].start[j] = flashbase;
-			}
-			if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x4000 + 0x2000 * (j - 1);
-			}
-			if (j == 3) {
-				/* 4th is 32 KiB */
-				flash_info[i].start[j] = flashbase + 0x8000;
-			}
-			if ((j >= 4) && (j <= 34)) {
-				/* rest is 256 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x10000 + 0x10000 * (j -
-									 4);
-			}
-		}
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
-
-	return size;
-}
-
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result;
-	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
-	int chip1;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	printf ("\n");
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		set_timer (0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile u16 *addr =
-				(volatile u16 *) (info->start[sect]);
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			chip1 = 0;
-
-			do {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					chip1 = TMO;
-					break;
-				}
-
-				if (!chip1
-				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-					chip1 = READY;
-
-			} while (!chip1);
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
-				goto outahere;
-			}
-			if (chip1 == TMO) {
-				rc = ERR_TIMOUT;
-				goto outahere;
-			}
-
-			printf ("ok.\n");
-		} else {	/* it was protected */
-
-			printf ("protected!\n");
-		}
-	}
-
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-      outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay (10000);
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile u16 *addr = (volatile u16 *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int cflag, iflag;
-	int chip1;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	set_timer (0);
-
-	/* wait until flash is ready */
-	chip1 = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-			chip1 = ERR | TMO;
-			break;
-		}
-		if (!chip1 && ((result & 0x80) == (data & 0x80)))
-			chip1 = READY;
-
-	} while (!chip1);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	}
-
-#if 0
-	if (cnt & 1) {
-		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
-	}
-#endif
-
-	wp = addr;
-
-	if (addr & 1) {
-		data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
-							  src);
-		if ((rc = write_word (info, wp - 1, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	while (cnt >= 2) {
-		data = *((volatile u16 *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src) << 8) |
-			*((volatile u8 *) (wp + 1));
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c
index a08af68..243d6a4 100644
--- a/board/m5282evb/m5282evb.c
+++ b/board/m5282evb/m5282evb.c
@@ -22,14 +22,71 @@
  */
 
 #include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard (void)
 {
-	puts ("MOTOROLA M5272EVB Evaluation Board\n");
+	puts ("Board: Freescale M5282EVB Evaluation Board\n");
 	return 0;
 }
 
 long int initdram (int board_type)
 {
-	return 0x1000000;
+	u32 dramsize, i, dramclk;
+
+	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE))
+	{
+		dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+
+		/* Initialize DRAM Control Register: DCR */
+		MCFSDRAMC_DCR = (0
+			| MCFSDRAMC_DCR_RTIM_6
+			| MCFSDRAMC_DCR_RC((15 * dramclk)>>4));
+
+		/* Initialize DACR0 */
+		MCFSDRAMC_DACR0 = (0
+			| MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE)
+			| MCFSDRAMC_DACR_CASL(1)
+			| MCFSDRAMC_DACR_CBM(3)
+			| MCFSDRAMC_DACR_PS_32);
+
+		/* Initialize DMR0 */
+		MCFSDRAMC_DMR0 = (0
+			| ((dramsize - 1) & 0xFFFC0000)
+			| MCFSDRAMC_DMR_V);
+
+		/* Set IP (bit 3) in DACR */
+		MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+
+		/* Wait 30ns to allow banks to precharge */
+		for (i = 0; i < 5; i++) {
+			asm ("nop");
+		}
+
+		/* Write to this block to initiate precharge */
+		*(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696;
+
+		/* Set RE (bit 15) in DACR */
+		MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+
+		/* Wait for at least 8 auto refresh cycles to occur */
+		for (i = 0; i < 2000; i++) {
+			asm(" nop");
+		}
+
+		/* Finish the configuration by issuing the IMRS. */
+		MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS;
+
+		/* Write to the SDRAM Mode Register */
+		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+	}
 }
diff --git a/board/m5282evb/mii.c b/board/m5282evb/mii.c
new file mode 100644
index 0000000..ebd3ed9
--- /dev/null
+++ b/board/m5282evb/mii.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		MCFGPIO_PASPAR |= 0x0F00;
+		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+	} else {
+		MCFGPIO_PASPAR &= 0xF0FF;
+		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
+	}
+	return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
+#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
+
+#define STR_ID_LXT970		"LXT970"
+#define STR_ID_LXT971		"LXT971"
+#define STR_ID_82555		"Intel82555"
+#define STR_ID_QS6612		"QS6612"
+#define STR_ID_AMD79C784	"AMD79C784"
+#define STR_ID_AMD79C874VC	"AMD79C874VC"
+#define STR_ID_LSI80225		"LSI80225"
+#define STR_ID_LSI80225B	"LSI80225/B"
+#define STR_ID_DP83848VV	"N83848"
+#define STR_ID_DP83849		"N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+	volatile fec_t *fecp = (fec_t *) (info->miibase);
+	int i;
+
+	fecp->ecr = FEC_ECR_RESET;
+	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+		udelay(1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf("FEC_RESET_DELAY timeout\n");
+	}
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	volatile fec_t *ep;
+	uint mii_reply;
+	int j = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	ep = (fec_t *) info->miibase;
+
+	ep->mmfr = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j >= MCFFEC_TOUT_LOOP) {
+		printf("MII not complete\n");
+		return -1;
+	}
+
+	mii_reply = ep->mmfr;	/* result from phy */
+	ep->eir = FEC_EIR_MII;	/* clear MII complete */
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+	return (mii_reply & 0xffff);	/* data read from phy */
+}
+#endif				/* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+	struct fec_info_s *info = dev->priv;
+	int phyaddr, pass;
+	uint phyno, phytype;
+
+	if (info->phyname_init)
+		return info->phy_addr;
+
+	phyaddr = -1;		/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+
+		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |=
+				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_AMD79C874VC:
+					strcpy(info->phy_name,
+					       STR_ID_AMD79C874VC);
+					info->phyname_init = 1;
+					break;
+				default:
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
+					break;
+				}
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ", phyno, pass);
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_AMD79C874VC:
+					printf(STR_ID_AMD79C874VC);
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0)
+		printf("No PHY device found.\n");
+
+	return phyaddr;
+}
+#endif				/* CFG_DISCOVER_PHY */
+
+int mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+	volatile fec_t *fecp;
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	int miispd = 0, i = 0;
+	u16 autoneg = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	fecp = (fec_t *) info->miibase;
+
+	fecpin_setclear(dev, 1);
+
+	mii_reset(info);
+
+	/* We use strictly polling mode only */
+	fecp->eimr = 0;
+
+	/* Clear any pending interrupt */
+	fecp->eir = 0xffffffff;
+
+	/* Set MII speed */
+	miispd = (gd->bus_clk / 1000000) / 5;
+	fecp->mscr = miispd << 1;
+
+	info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+	while (i < MCFFEC_TOUT_LOOP) {
+		autoneg = 0;
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		i++;
+
+		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+			break;
+
+		udelay(500);
+	}
+	if (i >= MCFFEC_TOUT_LOOP) {
+		printf("Auto Negotiation not complete\n");
+	}
+
+	/* adapt to the half/full speed settings */
+	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		       unsigned short *value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+			unsigned short value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+
+#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */