ARM: remove broken "m501sk" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 203 deletions

diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c
deleted file mode 100644
index c995768..0000000
--- a/board/m501sk/m501sk.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2008
- * Based on modifications by Alan Lu / Artila
- * Author : Timo Tuunainen / Sysart
-			Kimmo Leppala / Sysart
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-#include "m501sk.h"
-#include "net.h"
-
-#ifdef CONFIG_M501SK
-
-void m501sk_gpio_init(void)
-{
-	AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) |
-		1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
-		1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
-	AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) |
-		1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
-		1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
-	AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96);
-	AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96);
-	AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32);
-	AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32);
-	AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8);
-
-	/* Power OFF all USART's LEDs */
-	AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
-		AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
-		AT91C_PA23_TXD2;
-
-	AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
-		AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
-		AT91C_PA23_TXD2;
-
-	AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
-		AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
-		AT91C_PA23_TXD2;
-
-	AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-	AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-	AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-}
-
-uchar m501sk_gpio_set(M501SK_PIO io)
-{
-	uchar status = 0xff;
-	switch (io) {
-	case M501SK_DEBUG_LED1:
-	case M501SK_DEBUG_LED2:
-	case M501SK_DEBUG_LED3:
-	case M501SK_DEBUG_LED4:
-	case M501SK_READY_LED:
-		AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96);
-		status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
-		break;
-	case M501SK_BUZZER:
-		AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32);
-		status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
-		break;
-	}
-	return status;
-}
-
-uchar m501sk_gpio_clear(M501SK_PIO io)
-{
-	uchar status = 0xff;
-	switch (io) {
-	case M501SK_DEBUG_LED1:
-	case M501SK_DEBUG_LED2:
-	case M501SK_DEBUG_LED3:
-	case M501SK_DEBUG_LED4:
-	case M501SK_READY_LED:
-		AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96);
-		status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
-		break;
-	case M501SK_BUZZER:
-		AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32);
-		status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
-		break;
-	}
-	return status;
-}
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* Enable Ctrlc */
-	console_init_f();
-
-	/* Correct IRDA resistor problem */
-	/* Set PA23_TXD in Output */
-	((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-	gd->bd->bi_arch_number = MACH_TYPE_M501;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-	m501sk_gpio_init();
-
-	/* Do interrupt init here, because flash needs timers */
-	timer_init();
-	flash_init();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	int i = 0;
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-
-	for (i = 0; i < 500; i++) {
-		m501sk_gpio_clear(M501SK_DEBUG_LED3);
-		m501sk_gpio_clear(M501SK_BUZZER);
-		udelay(250);
-		m501sk_gpio_set(M501SK_DEBUG_LED3);
-		m501sk_gpio_set(M501SK_BUZZER);
-		udelay(80);
-	}
-	m501sk_gpio_clear(M501SK_BUZZER);
-	m501sk_gpio_clear(M501SK_DEBUG_LED3);
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-#if defined(CONFIG_CMD_NET)
-	eth_init(gd->bd);
-	eth_halt();
-#endif
-
-	/* Protect U-Boot, kernel & ramdisk memory addresses */
-	run_command("protect on 10000000 1041ffff", 0);
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-/*
- * Name:
- *     at91rm9200_GetPhyInterface
- * Description:
- *     Initialise the interface functions to the PHY
- * Arguments:
- *     None
- * Return value:
- *     None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-	p_phyops->Init = dm9161_InitPhy;
-	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
-	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
-	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-	rc = at91emac_register(bis, 0);
-	return rc;
-}
-#endif
-#endif /* CONFIG_M501SK */