summaryrefslogtreecommitdiff
path: root/board/lpc2292sodimm
diff options
context:
space:
mode:
authorPeter Pearse <peter.pearse@arm.com>2007-05-09 11:40:34 +0100
committerPeter Pearse <peter.pearse@arm.com>2007-05-09 11:40:34 +0100
commit5c6d2b5a500f8c49670de8910150b78a41f781fc (patch)
treea2bef26ef455a7d01195e967c6d4fa344714af6a /board/lpc2292sodimm
parentb0d8f5bf0d215adc9424cb228b2484dbf07f7761 (diff)
downloadu-boot-imx-5c6d2b5a500f8c49670de8910150b78a41f781fc.zip
u-boot-imx-5c6d2b5a500f8c49670de8910150b78a41f781fc.tar.gz
u-boot-imx-5c6d2b5a500f8c49670de8910150b78a41f781fc.tar.bz2
Remove the deleted files for the SMN42 patch
Diffstat (limited to 'board/lpc2292sodimm')
-rw-r--r--board/lpc2292sodimm/eth.c885
-rw-r--r--board/lpc2292sodimm/iap_entry.S7
-rw-r--r--board/lpc2292sodimm/mmc.c154
-rw-r--r--board/lpc2292sodimm/mmc_hw.c233
-rw-r--r--board/lpc2292sodimm/mmc_hw.h29
-rw-r--r--board/lpc2292sodimm/spi.c40
-rw-r--r--board/lpc2292sodimm/spi.h82
7 files changed, 0 insertions, 1430 deletions
diff --git a/board/lpc2292sodimm/eth.c b/board/lpc2292sodimm/eth.c
deleted file mode 100644
index 249ab04..0000000
--- a/board/lpc2292sodimm/eth.c
+++ /dev/null
@@ -1,885 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include "spi.h"
-
-/*
- * Control Registers in Bank 0
- */
-
-#define CTL_REG_ERDPTL 0x00
-#define CTL_REG_ERDPTH 0x01
-#define CTL_REG_EWRPTL 0x02
-#define CTL_REG_EWRPTH 0x03
-#define CTL_REG_ETXSTL 0x04
-#define CTL_REG_ETXSTH 0x05
-#define CTL_REG_ETXNDL 0x06
-#define CTL_REG_ETXNDH 0x07
-#define CTL_REG_ERXSTL 0x08
-#define CTL_REG_ERXSTH 0x09
-#define CTL_REG_ERXNDL 0x0A
-#define CTL_REG_ERXNDA 0x0B
-#define CTL_REG_ERXRDPTL 0x0C
-#define CTL_REG_ERXRDPTH 0x0D
-#define CTL_REG_ERXWRPTL 0x0E
-#define CTL_REG_ERXWRPTH 0x0F
-#define CTL_REG_EDMASTL 0x10
-#define CTL_REG_EDMASTH 0x11
-#define CTL_REG_EDMANDL 0x12
-#define CTL_REG_EDMANDH 0x13
-#define CTL_REG_EDMADSTL 0x14
-#define CTL_REG_EDMADSTH 0x15
-#define CTL_REG_EDMACSL 0x16
-#define CTL_REG_EDMACSH 0x17
-/* these are common in all banks */
-#define CTL_REG_EIE 0x1B
-#define CTL_REG_EIR 0x1C
-#define CTL_REG_ESTAT 0x1D
-#define CTL_REG_ECON2 0x1E
-#define CTL_REG_ECON1 0x1F
-
-/*
- * Control Registers in Bank 1
- */
-
-#define CTL_REG_EHT0 0x00
-#define CTL_REG_EHT1 0x01
-#define CTL_REG_EHT2 0x02
-#define CTL_REG_EHT3 0x03
-#define CTL_REG_EHT4 0x04
-#define CTL_REG_EHT5 0x05
-#define CTL_REG_EHT6 0x06
-#define CTL_REG_EHT7 0x07
-#define CTL_REG_EPMM0 0x08
-#define CTL_REG_EPMM1 0x09
-#define CTL_REG_EPMM2 0x0A
-#define CTL_REG_EPMM3 0x0B
-#define CTL_REG_EPMM4 0x0C
-#define CTL_REG_EPMM5 0x0D
-#define CTL_REG_EPMM6 0x0E
-#define CTL_REG_EPMM7 0x0F
-#define CTL_REG_EPMCSL 0x10
-#define CTL_REG_EPMCSH 0x11
-#define CTL_REG_EPMOL 0x14
-#define CTL_REG_EPMOH 0x15
-#define CTL_REG_EWOLIE 0x16
-#define CTL_REG_EWOLIR 0x17
-#define CTL_REG_ERXFCON 0x18
-#define CTL_REG_EPKTCNT 0x19
-
-/*
- * Control Registers in Bank 2
- */
-
-#define CTL_REG_MACON1 0x00
-#define CTL_REG_MACON2 0x01
-#define CTL_REG_MACON3 0x02
-#define CTL_REG_MACON4 0x03
-#define CTL_REG_MABBIPG 0x04
-#define CTL_REG_MAIPGL 0x06
-#define CTL_REG_MAIPGH 0x07
-#define CTL_REG_MACLCON1 0x08
-#define CTL_REG_MACLCON2 0x09
-#define CTL_REG_MAMXFLL 0x0A
-#define CTL_REG_MAMXFLH 0x0B
-#define CTL_REG_MAPHSUP 0x0D
-#define CTL_REG_MICON 0x11
-#define CTL_REG_MICMD 0x12
-#define CTL_REG_MIREGADR 0x14
-#define CTL_REG_MIWRL 0x16
-#define CTL_REG_MIWRH 0x17
-#define CTL_REG_MIRDL 0x18
-#define CTL_REG_MIRDH 0x19
-
-/*
- * Control Registers in Bank 3
- */
-
-#define CTL_REG_MAADR1 0x00
-#define CTL_REG_MAADR0 0x01
-#define CTL_REG_MAADR3 0x02
-#define CTL_REG_MAADR2 0x03
-#define CTL_REG_MAADR5 0x04
-#define CTL_REG_MAADR4 0x05
-#define CTL_REG_EBSTSD 0x06
-#define CTL_REG_EBSTCON 0x07
-#define CTL_REG_EBSTCSL 0x08
-#define CTL_REG_EBSTCSH 0x09
-#define CTL_REG_MISTAT 0x0A
-#define CTL_REG_EREVID 0x12
-#define CTL_REG_ECOCON 0x15
-#define CTL_REG_EFLOCON 0x17
-#define CTL_REG_EPAUSL 0x18
-#define CTL_REG_EPAUSH 0x19
-
-
-/*
- * PHY Register
- */
-
-#define PHY_REG_PHID1 0x02
-#define PHY_REG_PHID2 0x03
-
-
-/*
- * Receive Filter Register (ERXFCON) bits
- */
-
-#define ENC_RFR_UCEN 0x80
-#define ENC_RFR_ANDOR 0x40
-#define ENC_RFR_CRCEN 0x20
-#define ENC_RFR_PMEN 0x10
-#define ENC_RFR_MPEN 0x08
-#define ENC_RFR_HTEN 0x04
-#define ENC_RFR_MCEN 0x02
-#define ENC_RFR_BCEN 0x01
-
-/*
- * ECON1 Register Bits
- */
-
-#define ENC_ECON1_TXRST 0x80
-#define ENC_ECON1_RXRST 0x40
-#define ENC_ECON1_DMAST 0x20
-#define ENC_ECON1_CSUMEN 0x10
-#define ENC_ECON1_TXRTS 0x08
-#define ENC_ECON1_RXEN 0x04
-#define ENC_ECON1_BSEL1 0x02
-#define ENC_ECON1_BSEL0 0x01
-
-/*
- * ECON2 Register Bits
- */
-#define ENC_ECON2_AUTOINC 0x80
-#define ENC_ECON2_PKTDEC 0x40
-#define ENC_ECON2_PWRSV 0x20
-#define ENC_ECON2_VRPS 0x08
-
-/*
- * EIR Register Bits
- */
-#define ENC_EIR_PKTIF 0x40
-#define ENC_EIR_DMAIF 0x20
-#define ENC_EIR_LINKIF 0x10
-#define ENC_EIR_TXIF 0x08
-#define ENC_EIR_WOLIF 0x04
-#define ENC_EIR_TXERIF 0x02
-#define ENC_EIR_RXERIF 0x01
-
-/*
- * ESTAT Register Bits
- */
-
-#define ENC_ESTAT_INT 0x80
-#define ENC_ESTAT_LATECOL 0x10
-#define ENC_ESTAT_RXBUSY 0x04
-#define ENC_ESTAT_TXABRT 0x02
-#define ENC_ESTAT_CLKRDY 0x01
-
-/*
- * EIE Register Bits
- */
-
-#define ENC_EIE_INTIE 0x80
-#define ENC_EIE_PKTIE 0x40
-#define ENC_EIE_DMAIE 0x20
-#define ENC_EIE_LINKIE 0x10
-#define ENC_EIE_TXIE 0x08
-#define ENC_EIE_WOLIE 0x04
-#define ENC_EIE_TXERIE 0x02
-#define ENC_EIE_RXERIE 0x01
-
-/*
- * MACON1 Register Bits
- */
-#define ENC_MACON1_LOOPBK 0x10
-#define ENC_MACON1_TXPAUS 0x08
-#define ENC_MACON1_RXPAUS 0x04
-#define ENC_MACON1_PASSALL 0x02
-#define ENC_MACON1_MARXEN 0x01
-
-
-/*
- * MACON2 Register Bits
- */
-#define ENC_MACON2_MARST 0x80
-#define ENC_MACON2_RNDRST 0x40
-#define ENC_MACON2_MARXRST 0x08
-#define ENC_MACON2_RFUNRST 0x04
-#define ENC_MACON2_MATXRST 0x02
-#define ENC_MACON2_TFUNRST 0x01
-
-/*
- * MACON3 Register Bits
- */
-#define ENC_MACON3_PADCFG2 0x80
-#define ENC_MACON3_PADCFG1 0x40
-#define ENC_MACON3_PADCFG0 0x20
-#define ENC_MACON3_TXCRCEN 0x10
-#define ENC_MACON3_PHDRLEN 0x08
-#define ENC_MACON3_HFRMEN 0x04
-#define ENC_MACON3_FRMLNEN 0x02
-#define ENC_MACON3_FULDPX 0x01
-
-/*
- * MICMD Register Bits
- */
-#define ENC_MICMD_MIISCAN 0x02
-#define ENC_MICMD_MIIRD 0x01
-
-/*
- * MISTAT Register Bits
- */
-#define ENC_MISTAT_NVALID 0x04
-#define ENC_MISTAT_SCAN 0x02
-#define ENC_MISTAT_BUSY 0x01
-
-/*
- * PHID1 and PHID2 values
- */
-#define ENC_PHID1_VALUE 0x0083
-#define ENC_PHID2_VALUE 0x1400
-#define ENC_PHID2_MASK 0xFC00
-
-
-#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
-#define ENC_RESET 0x00020000 /* pin P1.17 */
-
-#define FAILSAFE_VALUE 5000
-
-/*
- * Controller memory layout:
- *
- * 0x0000 - 0x17ff 6k bytes receive buffer
- * 0x1800 - 0x1fff 2k bytes transmit buffer
- */
-/* Use the lower memory for receiver buffer. See errata pt. 5 */
-#define ENC_RX_BUF_START 0x0000
-#define ENC_TX_BUF_START 0x1800
-
-/* maximum frame length */
-#define ENC_MAX_FRM_LEN 1518
-
-#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
-#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
-#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
-
-
-static unsigned char encReadReg (unsigned char regNo);
-static void encWriteReg (unsigned char regNo, unsigned char data);
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
-static void encReadBuff (unsigned short length, unsigned char *pBuff);
-static void encWriteBuff (unsigned short length, unsigned char *pBuff);
-static void encBitSet (unsigned char regNo, unsigned char data);
-static void encBitClr (unsigned char regNo, unsigned char data);
-static void encReset (void);
-static void encInit (unsigned char *pEthAddr);
-static unsigned short phyRead (unsigned char addr);
-static void encPoll (void);
-static void encRx (void);
-
-#define m_nic_read(reg) encReadReg(reg)
-#define m_nic_write(reg, data) encWriteReg(reg, data)
-#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
-#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
-#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
-
-/* bit field set */
-#define m_nic_bfs(reg, data) encBitSet(reg, data)
-
-/* bit field clear */
-#define m_nic_bfc(reg, data) encBitClr(reg, data)
-
-static unsigned char bank = 0; /* current bank in enc28j60 */
-static unsigned char next_pointer_lsb;
-static unsigned char next_pointer_msb;
-
-static unsigned char buffer[ENC_MAX_FRM_LEN];
-static int rxResetCounter = 0;
-
-#define RX_RESET_COUNTER 1000;
-
-/*-----------------------------------------------------------------------------
- * Returns 0 when failes otherwize 1
- */
-int eth_init (bd_t * bis)
-{
- /* configure GPIO */
- (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
- (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
-
- /* CS and RESET active low */
- PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
- PUT32 (IO1SET, ENC_RESET);
-
- spi_init ();
-
- /* initialize controller */
- encReset ();
- encInit (bis->bi_enetaddr);
-
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-
- return 0;
-}
-
-int eth_send (volatile void *packet, int length)
-{
- /* check frame length, etc. */
- /* TODO: */
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /* set EWRPT */
- m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
- m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
-
- /* set ETXST */
- m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
- m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
-
- /* write packet */
- m_nic_write_data (length, (unsigned char *) packet);
-
- /* set ETXND */
- m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
- m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
-
- /* set ECON1.TXRTS */
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
-
- return 0;
-}
-
-
-/*****************************************************************************
- * This function resets the receiver only. This function may be called from
- * interrupt-context.
- */
-static void encReceiverReset (void)
-{
- unsigned char econ1;
-
- econ1 = m_nic_read (CTL_REG_ECON1);
- if ((econ1 & ENC_ECON1_RXRST) == 0) {
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
- rxResetCounter = RX_RESET_COUNTER;
- }
-}
-
-/*****************************************************************************
- * receiver reset timer
- */
-static void encReceiverResetCallback (void)
-{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-}
-
-/*-----------------------------------------------------------------------------
- * Check for received packets. Call NetReceive for each packet. The return
- * value is ignored by the caller.
- */
-int eth_rx (void)
-{
- if (rxResetCounter > 0 && --rxResetCounter == 0) {
- encReceiverResetCallback ();
- }
-
- encPoll ();
-
- return 0;
-}
-
-void eth_halt (void)
-{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
-}
-
-/*****************************************************************************/
-
-static void encPoll (void)
-{
- unsigned char eir_reg;
- volatile unsigned char estat_reg;
- unsigned char pkt_cnt;
-
- /* clear global interrupt enable bit in enc28j60 */
- m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
- estat_reg = m_nic_read (CTL_REG_ESTAT);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
-
- if (eir_reg & ENC_EIR_TXIF) {
- /* clear TXIF bit in EIR */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
- }
-
- /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- if (pkt_cnt > 0) {
- if ((eir_reg & ENC_EIR_PKTIF) == 0) {
- /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
- }
- encRx ();
- /* clear PKTIF bit in EIR, this should not need to be done but it
- seems like we get problems if we do not */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
- }
-
- if (eir_reg & ENC_EIR_RXERIF) {
- printf ("encPoll: rx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
- }
- if (eir_reg & ENC_EIR_TXERIF) {
- printf ("encPoll: tx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
- }
-
- /* set global interrupt enable bit in enc28j60 */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-}
-
-static void encRx (void)
-{
- unsigned short pkt_len;
- unsigned short copy_len;
- unsigned short status;
- unsigned char eir_reg;
- unsigned char pkt_cnt = 0;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
- do {
- m_nic_read_data (6, buffer);
- next_pointer_lsb = buffer[0];
- next_pointer_msb = buffer[1];
- pkt_len = buffer[2];
- pkt_len |= (unsigned short) buffer[3] << 8;
- status = buffer[4];
- status |= (unsigned short) buffer[5] << 8;
-
- if (pkt_len <= ENC_MAX_FRM_LEN) {
- copy_len = pkt_len;
- } else {
- copy_len = 0;
- /* p_priv->stats.rx_dropped++; */
- /* we will drop this packet */
- }
-
- if ((status & (1L << 7)) == 0) { /* check Received Ok bit */
- copy_len = 0;
- /* p_priv->stats.rx_errors++; */
- }
-
- if (copy_len > 0) {
- m_nic_read_data (copy_len, buffer);
- }
-
- /* advance read pointer to next pointer */
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
- /* decrease packet counter */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1,
- (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- if (copy_len == 0) {
- eir_reg = m_nic_read (CTL_REG_EIR);
- encReceiverReset ();
- printf ("eth_rx: copy_len=0\n");
- continue;
- }
-
- NetReceive ((unsigned char *) buffer, pkt_len);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
- } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
- m_nic_write (CTL_REG_ERXRDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERXRDPTH, next_pointer_msb);
-}
-
-static void encWriteReg (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
-{
- unsigned char readback;
- int i;
-
- spi_lock ();
-
- for (i = 0; i < c; i++) {
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
-
- spi_unlock (); /* we must unlock spi first */
-
- readback = encReadReg (regNo);
-
- spi_lock ();
-
- if (readback == data)
- break;
- }
- spi_unlock ();
-
- if (i == c) {
- printf ("enc28j60: write reg %d failed\n", regNo);
- }
-}
-
-static unsigned char encReadReg (unsigned char regNo)
-{
- unsigned char rxByte;
-
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x1f); /* read reg 0x1f */
-
- bank = spi_read () & 0x3;
-
- enc_disable ();
- enc_enable ();
-
- spi_write (regNo);
- rxByte = spi_read ();
-
- /* check if MAC or MII register */
- if (((bank == 2) && (regNo <= 0x1a)) ||
- ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
- /* ignore first byte and read another byte */
- rxByte = spi_read ();
- }
-
- enc_disable ();
- spi_unlock ();
-
- return rxByte;
-}
-
-static void encReadBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x20 | 0x1a); /* read buffer memory */
-
- while (length--) {
- if (pBuff != NULL)
- *pBuff++ = spi_read ();
- else
- spi_write (0);
- }
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x60 | 0x1a); /* write buffer memory */
-
- spi_write (0x00); /* control byte */
-
- while (length--)
- spi_write (*pBuff++);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitSet (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x80 | regNo); /* bit field set */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitClr (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xA0 | regNo); /* bit field clear */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encReset (void)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xff); /* soft reset */
-
- enc_disable ();
- spi_unlock ();
-
- /* sleep 1 ms. See errata pt. 2 */
- udelay (1000);
-
-#if 0
- (*((volatile unsigned long *) IO1CLR)) &= ENC_RESET;
- mdelay (5);
- (*((volatile unsigned long *) IO1SET)) &= ENC_RESET;
-#endif
-}
-
-static void encInit (unsigned char *pEthAddr)
-{
- unsigned short phid1 = 0;
- unsigned short phid2 = 0;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /*
- * Setup the buffer space. The reset values are valid for the
- * other pointers.
- */
-#if 0
- /* We shall not write to ERXST, see errata pt. 5. Instead we
- have to make sure that ENC_RX_BUS_START is 0. */
- m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
-#endif
- m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
- next_pointer_msb = (ENC_RX_BUF_START >> 8);
-
- /*
- * For tracking purposes, the ERXRDPT registers should be programmed with
- * the same value. This is the read pointer.
- */
- m_nic_write (CTL_REG_ERXRDPTL, (ENC_RX_BUF_START & 0xFF));
- m_nic_write_retry (CTL_REG_ERXRDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- /* Setup receive filters. */
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* OR-filtering, Unicast, CRC-check and broadcast */
- m_nic_write_retry (CTL_REG_ERXFCON,
- (ENC_RFR_UCEN | ENC_RFR_CRCEN | ENC_RFR_BCEN), 1);
-
- /* Wait for Oscillator Start-up Timer (OST). */
- while ((m_nic_read (CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY) == 0) {
- static int cnt = 0;
-
- if (cnt++ >= 1000) {
- cnt = 0;
- }
- }
-
- /* verify identification */
- phid1 = phyRead (PHY_REG_PHID1);
- phid2 = phyRead (PHY_REG_PHID2);
-
- if (phid1 != ENC_PHID1_VALUE
- || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
- printf ("ERROR: failed to identify controller\n");
- printf ("phid1 = %x, phid2 = %x\n",
- phid1, (phid2 & ENC_PHID2_MASK));
- printf ("should be phid1 = %x, phid2 = %x\n",
- ENC_PHID1_VALUE, ENC_PHID2_VALUE);
- }
-
- /*
- * --- MAC Initialization ---
- */
-
- /* Pull MAC out of Reset */
-
- /* switch to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- /* clear MAC reset bits */
- m_nic_write_retry (CTL_REG_MACON2, 0, 1);
-
- /* enable MAC to receive frames */
- m_nic_write_retry (CTL_REG_MACON1, ENC_MACON1_MARXEN, 10);
-
- /* configure pad, tx-crc and duplex */
- /* TODO maybe enable FRMLNEN */
- m_nic_write_retry (CTL_REG_MACON3,
- (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN), 10);
-
- /* set maximum frame length */
- m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
- m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
-
- /*
- * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
- * and 0x15 for full duplex.
- */
- m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
-
- /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
- m_nic_write_retry (CTL_REG_MAIPGL, 0x12, 10);
-
- /*
- * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
- * 0x0c for half-duplex. Nothing for full-duplex
- */
- m_nic_write_retry (CTL_REG_MAIPGH, 0x0C, 10);
-
- /* set MAC address */
-
- /* switch to bank 3 */
- m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
-
- m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
- m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
- m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
- m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
- m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
- m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
-
- /*
- * Receive settings
- */
-
- /* auto-increment RX-pointer when reading a received packet */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_AUTOINC);
-
- /* enable interrupts */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-}
-
-/*****************************************************************************
- *
- * Description:
- * Read PHY registers.
- *
- * NOTE! This function will change to Bank 2.
- *
- * Params:
- * [in] addr address of the register to read
- *
- * Returns:
- * The value in the register
- */
-static unsigned short phyRead (unsigned char addr)
-{
- unsigned short ret = 0;
-
- /* move to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* write address to MIREGADR */
- m_nic_write (CTL_REG_MIREGADR, addr);
-
- /* set MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
-
- /* poll MISTAT.BUSY bit until operation is complete */
- while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
-
- if (cnt++ >= 1000) {
- /* GJ - this seems extremely dangerous! */
- /* printf("#"); */
- cnt = 0;
- }
- }
-
- /* clear MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, 0);
-
- ret = (m_nic_read (CTL_REG_MIRDH) << 8);
- ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
-
- return ret;
-}
diff --git a/board/lpc2292sodimm/iap_entry.S b/board/lpc2292sodimm/iap_entry.S
deleted file mode 100644
index c31d519..0000000
--- a/board/lpc2292sodimm/iap_entry.S
+++ /dev/null
@@ -1,7 +0,0 @@
-IAP_ADDRESS: .word 0x7FFFFFF1
-
-.globl iap_entry
-iap_entry:
- ldr r2, IAP_ADDRESS
- bx r2
- mov pc, lr
diff --git a/board/lpc2292sodimm/mmc.c b/board/lpc2292sodimm/mmc.c
deleted file mode 100644
index 1c0922f..0000000
--- a/board/lpc2292sodimm/mmc.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <fat.h>
-#include "mmc_hw.h"
-#include "spi.h"
-
-#ifdef CONFIG_MMC
-
-#undef MMC_DEBUG
-
-static block_dev_desc_t mmc_dev;
-
-/* these are filled out by a call to mmc_hw_get_parameters */
-static int hw_size; /* in kbytes */
-static int hw_nr_sects;
-static int hw_sect_size; /* in bytes */
-
-block_dev_desc_t * mmc_get_dev(int dev)
-{
- return (block_dev_desc_t *)(&mmc_dev);
-}
-
-unsigned long mmc_block_read(int dev,
- unsigned long start,
- lbaint_t blkcnt,
- unsigned long *buffer)
-{
- unsigned long rc = 0;
- unsigned char *p = (unsigned char *)buffer;
- unsigned long i;
- unsigned long addr = start;
-
-#ifdef MMC_DEBUG
- printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
- (unsigned long)blkcnt);
-#endif
-
- for(i = 0; i < (unsigned long)blkcnt; i++) {
-#ifdef MMC_DEBUG
- printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
-#endif
- (void)mmc_read_sector(addr, p);
- rc++;
- addr++;
- p += hw_sect_size;
- }
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------------
- * Read hardware paramterers (sector size, size, number of sectors)
- */
-static int mmc_hw_get_parameters(void)
-{
- unsigned char csddata[16];
- unsigned int sizemult;
- unsigned int size;
-
- mmc_read_csd(csddata);
- hw_sect_size = 1<<(csddata[5] & 0x0f);
- size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
- sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
- hw_nr_sects = (size+1)*(1<<(sizemult+2));
- hw_size = hw_nr_sects*hw_sect_size/1024;
-
-#ifdef MMC_DEBUG
- printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
- "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
-#endif
-
- return 0;
-}
-
-int mmc_init(int verbose)
-{
- int ret = -ENODEV;
-
- if (verbose)
- printf("mmc_init\n");
-
- spi_init();
- mmc_hw_init();
-
- mmc_hw_get_parameters();
-
- mmc_dev.if_type = IF_TYPE_MMC;
- mmc_dev.part_type = PART_TYPE_DOS;
- mmc_dev.dev = 0;
- mmc_dev.lun = 0;
- mmc_dev.type = 0;
- mmc_dev.blksz = hw_sect_size;
- mmc_dev.lba = hw_nr_sects;
- sprintf((char*)mmc_dev.vendor, "Unknown vendor");
- sprintf((char*)mmc_dev.product, "Unknown product");
- sprintf((char*)mmc_dev.revision, "N/A");
- mmc_dev.removable = 0; /* should be true??? */
- mmc_dev.block_read = mmc_block_read;
-
- fat_register_device(&mmc_dev, 1);
-
- ret = 0;
-
- return ret;
-}
-
-int mmc_write(uchar * src, ulong dst, int size)
-{
-#ifdef MMC_DEBUG
- printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size);
-#endif
- /* Since mmc2info always returns 0 this function will never be called */
- return 0;
-}
-
-int mmc_read(ulong src, uchar * dst, int size)
-{
-#ifdef MMC_DEBUG
- printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size);
-#endif
- /* Since mmc2info always returns 0 this function will never be called */
- return 0;
-}
-
-int mmc2info(ulong addr)
-{
- /* This function is used by cmd_cp to determine if source or destination
- address resides on MMC-card or not. We do not support copy to and from
- MMC-card so we always return 0. */
- return 0;
-}
-
-#endif /* CONFIG_MMC */
diff --git a/board/lpc2292sodimm/mmc_hw.c b/board/lpc2292sodimm/mmc_hw.c
deleted file mode 100644
index 31f2a79..0000000
--- a/board/lpc2292sodimm/mmc_hw.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- This code was original written by Ulrich Radig and modified by
- Embedded Artists AB (www.embeddedartists.com).
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include "spi.h"
-
-#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
-#define MMC_Disable() PUT32(IO1SET, 1l << 22)
-#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
-
-static unsigned char Write_Command_MMC (unsigned char *CMD);
-static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
- unsigned short int Bytes);
-
-/* initialize the hardware */
-int mmc_hw_init(void)
-{
- unsigned long a;
- unsigned short int Timeout = 0;
- unsigned char b;
- unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
-
- /* set-up GPIO and SPI */
- (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
- (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
-
- MMC_Disable();
-
- spi_lock();
- spi_set_clock(248);
- spi_set_cfg(0, 1, 0);
- MMC_Enable();
-
- /* waste some time */
- for(a=0; a < 20000; a++)
- asm("nop");
-
- /* Put the MMC/SD-card into SPI-mode */
- for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
- spi_write(0xff);
-
- /* Sends command CMD0 to MMC/SD-card */
- while (Write_Command_MMC(CMD) != 1) {
- if (Timeout++ > 200) {
- MMC_Disable();
- spi_unlock();
- return(1); /* Abort with command 1 (return 1) */
- }
- }
- /* Sends Command CMD1 an MMC/SD-card */
- Timeout = 0;
- CMD[0] = 0x41;/* Command 1 */
- CMD[5] = 0xFF;
-
- while (Write_Command_MMC(CMD) != 0) {
- if (Timeout++ > 200) {
- MMC_Disable();
- spi_unlock();
- return (2); /* Abort with command 2 (return 2) */
- }
- }
-
- MMC_Disable();
- spi_unlock();
-
- return 0;
-}
-
-/* ############################################################################
- Sends a command to the MMC/SD-card
- ######################################################################### */
-static unsigned char Write_Command_MMC (unsigned char *CMD)
-{
- unsigned char a, tmp = 0xff;
- unsigned short int Timeout = 0;
-
- MMC_Disable();
- spi_write(0xFF);
- MMC_Enable();
-
- for (a = 0; a < 0x06; a++)
- spi_write(*CMD++);
-
- while (tmp == 0xff) {
- tmp = spi_read();
- if (Timeout++ > 5000)
- break;
- }
-
- return (tmp);
-}
-
-/* ############################################################################
- Routine to read the CID register from the MMC/SD-card (16 bytes)
- ######################################################################### */
-void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
- int Bytes)
-{
- unsigned short int a;
-
- spi_lock();
- mmc_spi_cfg();
- MMC_Enable();
-
- if (Write_Command_MMC(CMD) != 0) {
- MMC_Disable();
- spi_unlock();
- return;
- }
-
- while (spi_read() != 0xfe) {};
- for (a = 0; a < Bytes; a++)
- *Buffer++ = spi_read();
-
- /* Read the CRC-byte */
- spi_read(); /* CRC - byte is discarded */
- spi_read(); /* CRC - byte is discarded */
- /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
- MMC_Disable();
- spi_unlock();
-
- return;
-}
-
-/* ############################################################################
- Routine to read a block (512 bytes) from the MMC/SD-card
- ######################################################################### */
-unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
-{
- /* Command 16 to read aBlocks from the MMC/SD - caed */
- unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
-
- /* The addres on the MMC/SD-card is in bytes,
- addr is transformed from blocks to bytes and the result is
- placed into the command */
-
- addr = addr << 9; /* addr = addr * 512 */
-
- CMD[1] = ((addr & 0xFF000000) >> 24);
- CMD[2] = ((addr & 0x00FF0000) >> 16);
- CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
- MMC_Read_Block(CMD, Buffer, 512);
-
- return (0);
-}
-
-/* ############################################################################
- Routine to write a block (512 byte) to the MMC/SD-card
- ######################################################################### */
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
-{
- unsigned char tmp, a;
- unsigned short int b;
- /* Command 24 to write a block to the MMC/SD - card */
- unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
- /* The addres on the MMC/SD-card is in bytes,
- addr is transformed from blocks to bytes and the result is
- placed into the command */
-
- addr = addr << 9; /* addr = addr * 512 */
-
- CMD[1] = ((addr & 0xFF000000) >> 24);
- CMD[2] = ((addr & 0x00FF0000) >> 16);
- CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
- spi_lock();
- mmc_spi_cfg();
- MMC_Enable();
-
- /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
- tmp = Write_Command_MMC(CMD);
- if (tmp != 0) {
- MMC_Disable();
- spi_unlock();
- return(tmp);
- }
-
- /* Do a short delay and send a clock-pulse to the MMC/SD-card */
- for (a = 0; a < 100; a++)
- spi_read();
-
- /* Send a start byte to the MMC/SD-card */
- spi_write(0xFE);
-
- /* Write the block (512 bytes) to the MMC/SD-card */
- for (b = 0; b < 512; b++)
- spi_write(*Buffer++);
-
- /* write the CRC-Byte */
- spi_write(0xFF); /* write a dummy CRC */
- spi_write(0xFF); /* CRC code is not used */
-
- /* Wait for MMC/SD-card busy */
- while (spi_read() != 0xff) {};
-
- /* set MMC_Chip_Select to high (MMC/SD-card inactive) */
- MMC_Disable();
- spi_unlock();
- return (0);
-}
-
-/* #########################################################################
- Routine to read the CSD register from the MMC/SD-card (16 bytes)
- ######################################################################### */
-unsigned char mmc_read_csd (unsigned char *Buffer)
-{
- /* Command to read the CSD register */
- unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
- MMC_Read_Block(CMD, Buffer, 16);
-
- return (0);
-}
diff --git a/board/lpc2292sodimm/mmc_hw.h b/board/lpc2292sodimm/mmc_hw.h
deleted file mode 100644
index 3687dbf..0000000
--- a/board/lpc2292sodimm/mmc_hw.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- This module implements a linux character device driver for the 24c256 chip.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef _MMC_HW_
-#define _MMC_HW_
-
-unsigned char mmc_read_csd(unsigned char *Buffer);
-unsigned char mmc_read_sector (unsigned long addr,
- unsigned char *Buffer);
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
-int mmc_hw_init(void);
-
-#endif /* _MMC_HW_ */
diff --git a/board/lpc2292sodimm/spi.c b/board/lpc2292sodimm/spi.c
deleted file mode 100644
index 4ba1468..0000000
--- a/board/lpc2292sodimm/spi.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- This module implements an interface to the SPI on the lpc22xx.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include "spi.h"
-
-unsigned long spi_flags;
-unsigned char spi_idle = 0x00;
-
-int spi_init(void)
-{
- unsigned long pinsel0_value;
-
- /* activate spi pins */
- pinsel0_value = GET32(PINSEL0);
- pinsel0_value &= ~(0xFFl << 8);
- pinsel0_value |= (0x55l << 8);
- PUT32(PINSEL0, pinsel0_value);
-
- return 0;
-}
diff --git a/board/lpc2292sodimm/spi.h b/board/lpc2292sodimm/spi.h
deleted file mode 100644
index 6ae66e8..0000000
--- a/board/lpc2292sodimm/spi.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- This file defines the interface to the lpc22xx SPI module.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This file may be included in software not adhering to the GPL.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef SPI_H
-#define SPI_H
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-
-#define SPIF 0x80
-
-#define spi_lock() disable_interrupts();
-#define spi_unlock() enable_interrupts();
-
-extern unsigned long spi_flags;
-extern unsigned char spi_idle;
-
-int spi_init(void);
-
-static inline unsigned char spi_read(void)
-{
- unsigned char b;
-
- PUT8(S0SPDR, spi_idle);
- while (!(GET8(S0SPSR) & SPIF));
- b = GET8(S0SPDR);
-
- return b;
-}
-
-static inline void spi_write(unsigned char b)
-{
- PUT8(S0SPDR, b);
- while (!(GET8(S0SPSR) & SPIF));
- GET8(S0SPDR); /* this will clear the SPIF bit */
-}
-
-static inline void spi_set_clock(unsigned char clk_value)
-{
- PUT8(S0SPCCR, clk_value);
-}
-
-static inline void spi_set_cfg(unsigned char phase,
- unsigned char polarity,
- unsigned char lsbf)
-{
- unsigned char v = 0x20; /* master bit set */
-
- if (phase)
- v |= 0x08; /* set phase bit */
- if (polarity) {
- v |= 0x10; /* set polarity bit */
- spi_idle = 0xFF;
- } else {
- spi_idle = 0x00;
- }
- if (lsbf)
- v |= 0x40; /* set lsbf bit */
-
- PUT8(S0SPCR, v);
-}
-#endif /* SPI_H */