diff options
| author | Adam Ford <aford173@gmail.com> | 2016-01-29 20:12:34 -0600 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-02-08 10:10:39 -0500 |
| commit | 49c7303f0e526d46f8d16c5556963faf47c59d35 (patch) | |
| tree | c475a37013d191b3688d9f58ec90375cc280bfab /board/logicpd | |
| parent | 7443a9c40568179492af453841fbecc69d08071b (diff) | |
| download | u-boot-imx-49c7303f0e526d46f8d16c5556963faf47c59d35.zip u-boot-imx-49c7303f0e526d46f8d16c5556963faf47c59d35.tar.gz u-boot-imx-49c7303f0e526d46f8d16c5556963faf47c59d35.tar.bz2 | |
OMAP3: Enable SPL on omap3_logic
Previously, Omap3_logic assumed X-loader was present. With this
patch, we can finally replace X-loader with an MLO generated by
U-Boot. This requires ECC to be setup to match the Linux Kernel
and the PBIAS confgured for the SD card.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/logicpd')
| -rw-r--r-- | board/logicpd/omap3som/omap3logic.c | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index b86da5a..27ea4bb 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -26,10 +26,15 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/mach-types.h> +#include <linux/mtd/nand.h> #include "omap3logic.h" DECLARE_GLOBAL_DATA_PTR; +#define CONTROL_WKUP_CTRL 0x48002a5c +#define GPIO_IO_PWRDNZ (1 << 6) +#define PBIASLITEVMODE1 (1 << 8) + /* * two dimensional array of strucures containining board name and Linux * machine IDs; row it selected based on CPU column is slected based @@ -73,6 +78,57 @@ static struct board_id { }, }; +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + return serial_tstc() && serial_getc() == 'c'; +} +#endif + +#if defined(CONFIG_SPL_BUILD) +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on the first bank. This + * provides the timing values back to the function that configures + * the memory. + */ +void get_board_mem_timings(struct board_sdrc_timings *timings) +{ + timings->mr = MICRON_V_MR_165; + /* 256MB DDR */ + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; +} +#endif + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + t2_t *t2_base = (t2_t *)T2_BASE; + u32 pbias_lite; + /* set up dual-voltage GPIOs to 1.8V */ + pbias_lite = readl(&t2_base->pbias_lite); + pbias_lite &= ~PBIASLITEVMODE1; + pbias_lite |= PBIASLITEPWRDNZ1; + writel(pbias_lite, &t2_base->pbias_lite); + if (get_cpu_family() == CPU_OMAP36XX) + writel(readl(CONTROL_WKUP_CTRL) | GPIO_IO_PWRDNZ, + CONTROL_WKUP_CTRL); + twl4030_power_init(); + + omap_die_id_display(); + putc('\n'); + + return 0; +} + /* * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV */ |