Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

6 files changed, 58 insertions, 58 deletions

diff --git a/board/kup/common/flash.c b/board/kup/common/flash.c
index 7688ce2..134a9d5 100644
--- a/board/kup/common/flash.c
+++ b/board/kup/common/flash.c
@@ -25,12 +25,12 @@
 #include <mpc8xx.h>
 
 #ifndef	CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR	(CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
 #define CONFIG_FLASH_16BIT
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -43,13 +43,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -64,17 +64,17 @@ unsigned long flash_init (void)
 
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -325,7 +325,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 #else
 			while ((sect_addr[0] & 0x00800080) != 0x00800080) {
 #endif
-				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					return 1;
 				}
@@ -467,7 +467,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
@@ -507,7 +507,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
 #endif
 
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/kup/common/kup.c b/board/kup/common/kup.c
index d018e3c..fec5407 100644
--- a/board/kup/common/kup.c
+++ b/board/kup/common/kup.c
@@ -27,7 +27,7 @@
 
 int misc_init_f (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf8xx_t *siu = &immap->im_siu_conf;
 
 	while (siu->sc_sipend & 0x20000000) {
@@ -47,7 +47,7 @@ int misc_init_f (void)
 #ifdef CONFIG_IDE_LED
 void ide_led (uchar led, uchar status)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* We have one led for both pcmcia slots */
 	if (status) {		/* led on */
@@ -60,7 +60,7 @@ void ide_led (uchar led, uchar status)
 
 void poweron_key (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_ioport.iop_pcpar &= ~(PC_SWITCH1);
 	immap->im_ioport.iop_pcdir &= ~(PC_SWITCH1);
diff --git a/board/kup/common/load_sernum_ethaddr.c b/board/kup/common/load_sernum_ethaddr.c
index b7b7499..741e9a5 100644
--- a/board/kup/common/load_sernum_ethaddr.c
+++ b/board/kup/common/load_sernum_ethaddr.c
@@ -33,8 +33,8 @@
  * The KUP Hardware Information Block is defined as
  * follows:
  * - located in first flash bank
- * - starts at offset CFG_HWINFO_OFFSET
- * - size CFG_HWINFO_SIZE
+ * - starts at offset CONFIG_SYS_HWINFO_OFFSET
+ * - size CONFIG_SYS_HWINFO_SIZE
  *
  * Internal structure:
  * - sequence of ASCII character lines
@@ -55,15 +55,15 @@ void load_sernum_ethaddr (void)
 {
 	unsigned char *hwi;
 	char *var;
-	unsigned char hwi_stack[CFG_HWINFO_SIZE];
+	unsigned char hwi_stack[CONFIG_SYS_HWINFO_SIZE];
 	char *p;
 
-	hwi = (unsigned char *) (CFG_FLASH_BASE + CFG_HWINFO_OFFSET);
-	if (*((unsigned long *) hwi) != (unsigned long) CFG_HWINFO_MAGIC) {
+	hwi = (unsigned char *) (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
+	if (*((unsigned long *) hwi) != (unsigned long) CONFIG_SYS_HWINFO_MAGIC) {
 		printf ("HardwareInfo not found!\n");
 		return;
 	}
-	memcpy (hwi_stack, hwi, CFG_HWINFO_SIZE);
+	memcpy (hwi_stack, hwi, CONFIG_SYS_HWINFO_SIZE);
 
 	/*
 	 ** ethaddr
@@ -72,7 +72,7 @@ void load_sernum_ethaddr (void)
 	if (var) {
 		var += sizeof (ETHADDR_TOKEN) - 1;
 		p = strchr (var, '\r');
-		if ((unsigned char *)p < hwi + CFG_HWINFO_SIZE) {
+		if ((unsigned char *)p < hwi + CONFIG_SYS_HWINFO_SIZE) {
 			*p = '\0';
 			setenv ("ethaddr", var);
 			*p = '\r';
@@ -85,7 +85,7 @@ void load_sernum_ethaddr (void)
 	if (var) {
 		var += sizeof (LCD_TOKEN) - 1;
 		p = strchr (var, '\r');
-		if ((unsigned char *)p < hwi + CFG_HWINFO_SIZE) {
+		if ((unsigned char *)p < hwi + CONFIG_SYS_HWINFO_SIZE) {
 			*p = '\0';
 			setenv ("lcd", var);
 			*p = '\r';
diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c
index 8f0cf17..ce6b186 100644
--- a/board/kup/common/pcmcia.c
+++ b/board/kup/common/pcmcia.c
@@ -30,10 +30,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure SIUMCR to enable PCMCIA port B
@@ -125,9 +125,9 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* remove all power */
 	if (slot)
@@ -162,9 +162,9 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	if (!slot) /* Slot A is not configurable */
 		return 0;
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index 66d6180..df3ffb4 100644
--- a/board/kup/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -119,7 +119,7 @@ const uint sdram_table[] = {
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	uchar *latch,rev,mod;
 
 	/*
@@ -139,7 +139,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0 = 0;
 	long int size_b1 = 0;
@@ -154,7 +154,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -163,14 +163,14 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+/*	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;	*/
 
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+/*	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;	*/
 
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -204,7 +204,7 @@ phys_size_t initdram (int board_type)
 	size_b0 = 0x00800000;
 	size_b1 = 0x00800000;
 	size_b2 = 0x00800000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF800A00;
 	memctl->memc_br1 = 0x00000081;
@@ -216,7 +216,7 @@ phys_size_t initdram (int board_type)
 	size_b0 = 0x01000000;
 	size_b1 = 0x01000000;
 	size_b2 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF000A00;
 	memctl->memc_br1 = 0x00000081;
@@ -236,7 +236,7 @@ phys_size_t initdram (int board_type)
 int misc_init_r (void)
 {
 #ifdef CONFIG_STATUS_LED
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 #endif
 #ifdef CONFIG_KUP4K_LOGO
 	bd_t *bd = gd->bd;
@@ -263,7 +263,7 @@ void lcd_logo (bd_t * bd)
 	FB_INFO_S1D13xxx fb_info;
 	S1D_INDEX s1dReg;
 	S1D_VALUE s1dValue;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl;
 	ushort i;
 	uchar *fb;
diff --git a/board/kup/kup4x/kup4x.c b/board/kup/kup4x/kup4x.c
index f07ef18..c5b742d 100644
--- a/board/kup/kup4x/kup4x.c
+++ b/board/kup/kup4x/kup4x.c
@@ -114,7 +114,7 @@ const uint sdram_table[] = {
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile uchar *latch;
 	uchar rev, mod;
@@ -136,7 +136,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0 = 0;
 	long int size_b1 = 0;
@@ -151,7 +151,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -160,13 +160,13 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+/*	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;	*/
 
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+/*	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;	*/
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -207,7 +207,7 @@ phys_size_t initdram (int board_type)
 	size_b1 = 0x00800000;
 	size_b2 = 0x00800000;
 	size_b3 = 0x00800000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF800A00;
 	memctl->memc_br1 = 0x00000081;
@@ -222,7 +222,7 @@ phys_size_t initdram (int board_type)
 	size_b1 = 0x01000000;
 	size_b2 = 0x01000000;
 	size_b3 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF000A00;
 	memctl->memc_br1 = 0x00000081;
@@ -251,7 +251,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
 	ulong cnt, val;
@@ -294,7 +294,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 int misc_init_r (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifdef CONFIG_IDE_LED
 	/* Configure PA8 as output port */