mpc8xx: remove KUP4X, KUP4K board support

These boards are still non-generic boards.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Klaus Heydeck <heydeck@kieback-peter.de>

5 files changed, 0 insertions, 436 deletions

diff --git a/board/kup/kup4k/Kconfig b/board/kup/kup4k/Kconfig
deleted file mode 100644
index 903c341..0000000
--- a/board/kup/kup4k/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_KUP4K
-
-config SYS_BOARD
-	default "kup4k"
-
-config SYS_VENDOR
-	default "kup"
-
-config SYS_CONFIG_NAME
-	default "KUP4K"
-
-endif
diff --git a/board/kup/kup4k/MAINTAINERS b/board/kup/kup4k/MAINTAINERS
deleted file mode 100644
index 25d90cf..0000000
--- a/board/kup/kup4k/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-KUP4K BOARD
-M:	Klaus Heydeck <heydeck@kieback-peter.de>
-S:	Maintained
-F:	board/kup/kup4k/
-F:	include/configs/KUP4K.h
-F:	configs/KUP4K_defconfig
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
deleted file mode 100644
index c896fcd..0000000
--- a/board/kup/kup4k/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= kup4k.o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
deleted file mode 100644
index 71c6a79..0000000
--- a/board/kup/kup4k/kup4k.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <libfdt.h>
-#include <mpc8xx.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include "../common/kup.h"
-#include <asm/io.h>
-
-static unsigned char swapbyte(unsigned char c);
-static int read_diag(void);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ----------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47,		/* last */
-
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1FF77C35, 0xEFEABC34, 0x1FB57C35,	/* last */
-
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7FFFFC07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	uchar rev,mod,tmp,pcf,ak_rev,ak_mod;
-
-	/*
-	 * Init ChipSelect #4 (CAN + HW-Latch)
-	 */
-	out_be32(&immap->im_memctl.memc_or4, CONFIG_SYS_OR4);
-	out_be32(&immap->im_memctl.memc_br4, CONFIG_SYS_BR4);
-
-	/*
-	 * Init ChipSelect #5 (S1D13768)
-	 */
-	out_be32(&immap->im_memctl.memc_or5, CONFIG_SYS_OR5);
-	out_be32(&immap->im_memctl.memc_br5, CONFIG_SYS_BR5);
-
-	tmp = swapbyte(in_8((unsigned char*) LATCH_ADDR));
-	rev = (tmp & 0xF8) >> 3;
-	mod = (tmp & 0x07);
-
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	if (read_diag())
-		gd->flags &= ~GD_FLG_SILENT;
-
-	printf("Board: KUP4K Rev %d.%d AK:",rev,mod);
-	/*
-	 * TI Application report: Before using the IO as an input,
-	 * a high must be written to the IO first
-	 */
-	pcf = 0xFF;
-	i2c_write(0x21, 0, 0 , &pcf, 1);
-	if (i2c_read(0x21, 0, 0, &pcf, 1)) {
-		puts("n/a\n");
-	} else {
-		ak_rev = (pcf & 0xF8) >> 3;
-		ak_mod = (pcf & 0x07);
-		printf("%d.%d\n", ak_rev, ak_mod);
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size = 0;
-	uchar *latch, rev, tmp;
-
-	/*
-	 * Init ChipSelect #4 (CAN + HW-Latch) to determine Hardware Revision
-	 * Rev 1..6 -> 48 MB RAM;   Rev >= 7 -> 96 MB
-	 */
-	out_be32(&immap->im_memctl.memc_or4, CONFIG_SYS_OR4);
-	out_be32(&immap->im_memctl.memc_br4, CONFIG_SYS_BR4);
-
-	latch = (uchar *)0x90000200;
-	tmp = swapbyte(*latch);
-	rev = (tmp & 0xF8) >> 3;
-
-	upmconfig(UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
-
-	out_be32(&memctl->memc_mar, 0x00000088);
-	/* no refresh yet */
-	if(rev >= 7) {
-		out_be32(&memctl->memc_mamr,
-				 CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)));
-	} else {
-		out_be32(&memctl->memc_mamr,
-				 CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)));
-	}
-
-	udelay(200);
-
-	/* perform SDRAM initializsation sequence */
-
-	/* SDRAM bank 0 */
-	out_be32(&memctl->memc_mcr, 0x80002105);
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80002830); /* execute twice */
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80002106); /* RUN MRS Pattern from loc 6 */
-	udelay(1);
-
-	/* SDRAM bank 1 */
-	out_be32(&memctl->memc_mcr, 0x80004105);
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80004830); /* execute twice */
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80004106); /* RUN MRS Pattern from loc 6 */
-	udelay(1);
-
-	/* SDRAM bank 2 */
-	out_be32(&memctl->memc_mcr, 0x80006105);
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80006830); /* execute twice */
-	udelay(1);
-	out_be32(&memctl->memc_mcr, 0x80006106); /* RUN MRS Pattern from loc 6 */
-	udelay(1);
-
-	setbits_be32(&memctl->memc_mamr, MAMR_PTAE); /* enable refresh */
-	udelay(1000);
-
-	out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
-	udelay(1000);
-	if(rev >= 7) {
-		size = 32 * 3 * 1024 * 1024;
-		out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_9COL);
-		out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_9COL);
-		out_be32(&memctl->memc_or2, CONFIG_SYS_OR2_9COL);
-		out_be32(&memctl->memc_br2, CONFIG_SYS_BR2_9COL);
-		out_be32(&memctl->memc_or3, CONFIG_SYS_OR3_9COL);
-		out_be32(&memctl->memc_br3, CONFIG_SYS_BR3_9COL);
-	} else {
-		size = 16 * 3 * 1024 * 1024;
-		out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_8COL);
-		out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_8COL);
-		out_be32(&memctl->memc_or2, CONFIG_SYS_OR2_8COL);
-		out_be32(&memctl->memc_br2, CONFIG_SYS_BR2_8COL);
-		out_be32(&memctl->memc_or3, CONFIG_SYS_OR3_8COL);
-		out_be32(&memctl->memc_br3, CONFIG_SYS_BR3_8COL);
-	}
-	return (size);
-}
-
-/* ----------------------------------------------------------------------- */
-
-
-int misc_init_r(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#ifdef CONFIG_IDE_LED
-	/* Configure PA8 as output port */
-	setbits_be16(&immap->im_ioport.iop_padir, PA_8);
-	setbits_be16(&immap->im_ioport.iop_paodr, PA_8);
-	clrbits_be16(&immap->im_ioport.iop_papar, PA_8);
-	setbits_be16(&immap->im_ioport.iop_padat, PA_8); /* turn it off */
-#endif
-	load_sernum_ethaddr();
-	setenv("hw","4k");
-	poweron_key();
-	return (0);
-}
-
-
-static int read_diag(void)
-{
-	int diag;
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	clrbits_be16(&immr->im_ioport.iop_pcdir, PC_4);	/* input */
-	clrbits_be16(&immr->im_ioport.iop_pcpar, PC_4);	/* gpio */
-	setbits_be16(&immr->im_ioport.iop_pcdir, PC_5);	/* output */
-	clrbits_be16(&immr->im_ioport.iop_pcpar, PC_4);	/* gpio */
-	setbits_be16(&immr->im_ioport.iop_pcdat, PC_5);	/* 1 */
-	udelay(500);
-	if (in_be16(&immr->im_ioport.iop_pcdat) & PC_4) {
-		clrbits_be16(&immr->im_ioport.iop_pcdat, PC_5);/* 0 */
-		udelay(500);
-		if(in_be16(&immr->im_ioport.iop_pcdat) & PC_4)
-			diag = 0;
-		else
-			diag = 1;
-	} else {
-		diag = 0;
-	}
-	clrbits_be16(&immr->im_ioport.iop_pcdir, PC_5);	/* input */
-	return (diag);
-}
-
-static unsigned char swapbyte(unsigned char c)
-{
-	unsigned char result = 0;
-	int i = 0;
-
-	for(i = 0; i < 8; ++i) {
-		result = result << 1;
-		result |= (c & 1);
-		c = c >> 1;
-	}
-	return result;
-}
-
-/*
- * Device Tree Support
- */
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
deleted file mode 100644
index 0ea27e8..0000000
--- a/board/kup/kup4k/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}