diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2015-03-17 12:28:09 +0900 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-03-17 11:00:26 -0400 |
commit | 5043045dede0ad4ffb4c5ec21da81956ca3c8362 (patch) | |
tree | 7cbf13d68cbf85739080cd06337b01236e51ace4 /board/korat/init.S | |
parent | 41eb4e5c31fa0db032a596f00fe925185102d0f7 (diff) | |
download | u-boot-imx-5043045dede0ad4ffb4c5ec21da81956ca3c8362.zip u-boot-imx-5043045dede0ad4ffb4c5ec21da81956ca3c8362.tar.gz u-boot-imx-5043045dede0ad4ffb4c5ec21da81956ca3c8362.tar.bz2 |
powerpc: ppc4xx: remove korat board support
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Larry Johnson <lrj@acm.org>
Diffstat (limited to 'board/korat/init.S')
-rw-r--r-- | board/korat/init.S | 80 |
1 files changed, 0 insertions, 80 deletions
diff --git a/board/korat/init.S b/board/korat/init.S deleted file mode 100644 index 20c5bdd..0000000 --- a/board/korat/init.S +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_RWX | SA_G ) - - /* - * TLB entries for SDRAM are not needed on this platform. They are - * generated dynamically in the SPD DDR2 detection routine. - */ - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, - AC_RWX | SA_G ) -#endif - - /* TLB-entry for PCI Memory */ - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x00000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x00000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x10000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x10000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x20000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x20000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x30000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x30000000, 1, AC_RW | SA_IG ) - - /* TLB-entry for EBC */ - tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_RW | SA_IG ) - - /* TLB-entry for Internal Registers & OCM */ - /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ - tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_RWX | SA_I ) - - /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RW | SA_IG ) - - /* TLB-entry for peripherals */ - tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RW | SA_IG) - - /* TLB-entry PCI IO Space - from sr@denx.de */ - tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RW | SA_IG) - - tlbtab_end - -#if defined(CONFIG_KORAT_PERMANENT) - .globl korat_branch_absolute -korat_branch_absolute: - mtlr r3 - blr -#endif |