Merge remote-tracking branch 'u-boot/master'

Conflicts:
	boards.cfg

Conflicts were trivial once u-boot-arm/master boards.cfg was
reformatted (commit 6130c146) to match u-boot/master's own
reformatting (commit 1b37fa83).

6 files changed, 145 insertions, 26 deletions

diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 95a19cd..6bc8eb8 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -79,7 +79,7 @@ int get_scl(void)
 
 
 #define ZL30158_RST	8
-#define ZL30343_RST	9
+#define BFTIC4_RST	0
 
 int board_early_init_f(void)
 {
@@ -88,13 +88,15 @@ int board_early_init_f(void)
 	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
 	setbits_be32(&gur->ddrclkdr, 0x001f000f);
 
-	/* take the Zarlinks out of reset as soon as possible */
-	qrio_prst(ZL30158_RST, false, false);
-	qrio_prst(ZL30343_RST, false, false);
+	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable WD on it */
+	qrio_wdmask(BFTIC4_RST, true);
 
-	/* and set their reset to power-up only */
-	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST);
-	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST);
+	/* set the ZL30138's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and take it out of reset as soon as possible (needed for Hooper) */
+	qrio_prst(ZL30158_RST, false, false);
 
 	return 0;
 }
@@ -113,6 +115,12 @@ int board_early_init_r(void)
 	if (ret)
 		printf("error triggering PCIe FPGA config\n");
 
+	/* enable the Unit LED (red) & Boot LED (on) */
+	qrio_set_leds();
+
+	/* enable Application Buffer */
+	qrio_enable_app_buffer();
+
 	return ret;
 }
 
@@ -121,16 +129,37 @@ unsigned long get_board_sys_clk(unsigned long dummy)
 	return 66666666;
 }
 
+#define ETH_FRONT_PHY_RST	15
+#define QSFP2_RST		11
+#define QSFP1_RST		10
+#define ZL30343_RST		9
+
 int misc_init_f(void)
 {
 	/* configure QRIO pis for i2c deblocking */
 	i2c_deblock_gpio_cfg();
 
+	/* configure the front phy's prstcfg and take it out of reset */
+	qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prst(ETH_FRONT_PHY_RST, false, false);
+
+	/* set the ZL30343 prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable the WD on it */
+	qrio_wdmask(ZL30343_RST, true);
+
+	/* set the QSFPs' prstcfg to reset at power-up and unit rst only */
+	qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST);
+	qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST);
+
+	/* and enable the WD on them */
+	qrio_wdmask(QSFP1_RST, true);
+	qrio_wdmask(QSFP2_RST, true);
+
 	return 0;
 }
 
 #define NUM_SRDS_BANKS	2
-#define PHY_RST		15
 
 int misc_init_r(void)
 {
@@ -151,9 +180,6 @@ int misc_init_r(void)
 		}
 	}
 
-	/* take the mgmt eth phy out of reset */
-	qrio_prst(PHY_RST, false, false);
-
 	return 0;
 }
 
@@ -166,9 +192,23 @@ int hush_init_var(void)
 #endif
 
 #if defined(CONFIG_LAST_STAGE_INIT)
+
 int last_stage_init(void)
 {
+#if defined(CONFIG_KMCOGE4)
+	/* on KMCOGE4, the BFTIC4 is on the LBAPP2 */
+	struct bfticu_iomap *bftic4 =
+		(struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE;
+	u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+#endif
 	set_km_env();
+
 	return 0;
 }
 #endif
@@ -232,3 +272,16 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_fman_mac_addresses(blob);
 #endif
 }
+
+#if defined(CONFIG_POST)
+
+/* DIC26_SELFTEST GPIO used to start factory test sw */
+#define SELFTEST_PORT	GPIO_A
+#define SELFTEST_PIN	31
+
+int post_hotkeys_pressed(void)
+{
+	qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN);
+	return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN);
+}
+#endif
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index 0267596..afede99 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -20,6 +20,9 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
 #define PRSTCFG_POWUP_RST		0x3
 
 void qrio_prst(u8 bit, bool en, bool wden);
+void qrio_wdmask(u8 bit, bool wden);
 void qrio_prstcfg(u8 bit, u8 mode);
+void qrio_set_leds(void);
+void qrio_enable_app_buffer(void);
 
 void pci_of_setup(void *blob, bd_t *bd);
diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg
index 9af8bd5..1e0a171 100644
--- a/board/keymile/kmp204x/pbi.cfg
+++ b/board/keymile/kmp204x/pbi.cfg
@@ -8,16 +8,47 @@
 #
 
 #PBI commands
-#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
-#Freescale's errarta sheet suggests it may be done with PBI
+#Configure ALTCBAR for DCSR -> DCSR@89000000
+091380c0 000009C4
 09000010 00000000
+091380c0 000009C4
 09000014 00000000
+091380c0 000009C4
 09000018 81d00000
-09021008 0000f000
-09021028 0000f000
-09021048 0000f000
-09021068 0000f000
+#Workaround for A-004849
+091380c0 000009C4
+890B0050 00000002
+091380c0 000009C4
+890B0054 00000002
+091380c0 000009C4
+890B0058 00000002
+091380c0 000009C4
+890B005C 00000002
+091380c0 000009C4
+890B0090 00000002
+091380c0 000009C4
+890B0094 00000002
+091380c0 000009C4
+890B0098 00000002
+091380c0 000009C4
+890B009C 00000002
+091380c0 000009C4
+890B0108 00000012
+091380c0 000009C4
+#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
+89021008 0000f000
+091380c0 000009C4
+89021028 0000f000
+091380c0 000009C4
+89021048 0000f000
+091380c0 000009C4
+89021068 0000f000
+091380c0 000009C4
+#Flush PBL data
+09138000 00000000
+#Disable ALTCBAR
 09000018 00000000
+091380c0 000009C4
 #Initialize CPC1 as 1MB SRAM
 09010000 00200400
 09138000 00000000
diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c
index a484eb5..2b0b054 100644
--- a/board/keymile/kmp204x/pci.c
+++ b/board/keymile/kmp204x/pci.c
@@ -94,20 +94,23 @@ err_out:
 }
 
 #define PCIE_SW_RST	14
-#define PEXHC_SW_RST	13
-#define HOOPER_SW_RST	12
+#define PEXHC_RST	13
+#define HOOPER_RST	12
 
 void pci_init_board(void)
 {
-	/* first wait for the PCIe FPGA to be configured
+	qrio_prstcfg(PCIE_SW_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(PEXHC_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(HOOPER_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+
+	/* wait for the PCIe FPGA to be configured
 	 * it has been triggered earlier in board_early_init_r */
-	int ret = wait_for_fpga_config();
-	if (ret)
+	if (wait_for_fpga_config())
 		printf("error finishing PCIe FPGA config\n");
 
 	qrio_prst(PCIE_SW_RST, false, false);
-	qrio_prst(PEXHC_SW_RST, false, false);
-	qrio_prst(HOOPER_SW_RST, false, false);
+	qrio_prst(PEXHC_RST, false, false);
+	qrio_prst(HOOPER_RST, false, false);
 	/* Hooper is not direcly PCIe capable */
 	mdelay(50);
 
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
index 49f9aa2..b6ba93a 100644
--- a/board/keymile/kmp204x/qrio.c
+++ b/board/keymile/kmp204x/qrio.c
@@ -91,7 +91,7 @@ void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
 
 #define WDMASK_OFF	0x16
 
-static void qrio_wdmask(u8 bit, bool wden)
+void qrio_wdmask(u8 bit, bool wden)
 {
 	u16 wdmask;
 	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
@@ -144,3 +144,32 @@ void qrio_prstcfg(u8 bit, u8 mode)
 
 	out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
 }
+
+#define CTRLH_OFF		0x02
+#define CTRLH_WRL_BOOT		0x01
+#define CTRLH_WRL_UNITRUN	0x02
+
+void qrio_set_leds(void)
+{
+	u8 ctrlh;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* set UNIT LED to RED and BOOT LED to ON */
+	ctrlh = in_8(qrio_base + CTRLH_OFF);
+	ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN);
+	out_8(qrio_base + CTRLH_OFF, ctrlh);
+}
+
+#define CTRLL_OFF		0x03
+#define CTRLL_WRB_BUFENA	0x20
+
+void qrio_enable_app_buffer(void)
+{
+	u8 ctrll;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* enable application buffer */
+	ctrll = in_8(qrio_base + CTRLL_OFF);
+	ctrll |= (CTRLL_WRB_BUFENA);
+	out_8(qrio_base + CTRLL_OFF, ctrll);
+}
diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg
index 2d4c48c..236d513 100644
--- a/board/keymile/kmp204x/rcw_kmp204x.cfg
+++ b/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -7,5 +7,5 @@ aa55aa55 010e0100
 #64 bytes RCW data
 14600000 00000000 28200000 00000000
 148E70CF CFC02000 58000000 41000000
-00000000 00000000 00000000 F0428002
+00000000 00000000 00000000 F0428816
 00000000 00000000 00000000 00000000