summaryrefslogtreecommitdiff
path: root/board/keymile
diff options
context:
space:
mode:
authorValentin Longchamp <valentin.longchamp@keymile.com>2011-06-16 18:11:15 +0530
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-07-04 10:55:28 +0200
commit8f2827fc43fe92c93875631c730cb9b54998d340 (patch)
tree92450ce6932dbedfa3a9bcb2adb768f3f27c4a20 /board/keymile
parent680cfaf805e896d7e345916d168f44a325d5e784 (diff)
downloadu-boot-imx-8f2827fc43fe92c93875631c730cb9b54998d340.zip
u-boot-imx-8f2827fc43fe92c93875631c730cb9b54998d340.tar.gz
u-boot-imx-8f2827fc43fe92c93875631c730cb9b54998d340.tar.bz2
arm/km: ethernet support for mgcoge3un
The phy is also configured with "RGMII clock transitions when data stable" and "Class A driver for the direct backplane connection". Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board/keymile')
-rw-r--r--board/keymile/km_arm/km_arm.c39
1 files changed, 38 insertions, 1 deletions
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index d86acc9..ed6ede3 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -335,7 +335,42 @@ void dram_init_banksize(void)
}
}
-/* Configure and enable MV88E1118 PHY */
+#if defined(CONFIG_MGCOGE3UN)
+
+#define PHY_LED_SEL 0x18
+#define PHY_LED0_LINK (0x5)
+#define PHY_LED1_ACT (0x8<<4)
+#define PHY_LED2_INT (0xe<<8)
+#define PHY_SPEC_CTRL 0x1c
+#define PHY_RGMII_CLK_STABLE (0x1<<10)
+#define PHY_CLSA (0x1<<1)
+
+/* Configure and enable MV88E3018 PHY */
+void reset_phy(void)
+{
+ char *name = "egiga0";
+ unsigned short reg;
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* RGMII clk transition on data stable */
+ if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL, &reg) != 0)
+ printf("Error reading PHY spec ctrl reg\n");
+ if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL,
+ reg | PHY_RGMII_CLK_STABLE | PHY_CLSA) != 0)
+ printf("Error writing PHY spec ctrl reg\n");
+
+ /* leds setup */
+ if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL,
+ PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT) != 0)
+ printf("Error writing PHY LED reg\n");
+
+ /* reset the phy */
+ miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+}
+#else
+/* Configure and enable MV88E1118 PHY on the piggy*/
void reset_phy(void)
{
char *name = "egiga0";
@@ -346,6 +381,8 @@ void reset_phy(void)
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
}
+#endif
+
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var(void)