summaryrefslogtreecommitdiff
path: root/board/keymile
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2011-02-22 09:34:33 +0100
committerWolfgang Denk <wd@denx.de>2011-04-30 00:45:00 +0200
commit1ebbb77a194788424e519955f6b04dda8aa7e625 (patch)
treeb35ddaa429299aff20672008272fecdf8c47a09c /board/keymile
parent44097e26cce5b4ce4f64d15880a5a60524212ddf (diff)
downloadu-boot-imx-1ebbb77a194788424e519955f6b04dda8aa7e625.zip
u-boot-imx-1ebbb77a194788424e519955f6b04dda8aa7e625.tar.gz
u-boot-imx-1ebbb77a194788424e519955f6b04dda8aa7e625.tar.bz2
km_arm: change some register values for SDRAM initialization
These new values are: - enables UART0 and UART1 pins in MPP - define some L2 cache settings - changes a SDRAM timing to better fit the hardware - removed three writes that were the same as the reset values Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/keymile')
-rw-r--r--board/keymile/km_arm/kwbimage.cfg32
1 files changed, 18 insertions, 14 deletions
diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg
index 26d6aa0..b2f5193 100644
--- a/board/keymile/km_arm/kwbimage.cfg
+++ b/board/keymile/km_arm/kwbimage.cfg
@@ -27,16 +27,18 @@
# Boot Media configurations
BOOT_FROM spi # Boot from SPI flash
-DATA 0xFFD10000 0x01111111 # MPP Control 0 Register
-# bit 3-0: MPPSel0 1, NF_IO[2]
-# bit 7-4: MPPSel1 1, NF_IO[3]
-# bit 12-8: MPPSel2 1, NF_IO[4]
-# bit 15-12: MPPSel3 1, NF_IO[5]
+DATA 0xFFD10000 0x01112222 # MPP Control 0 Register
+# bit 3-0: MPPSel0 2, NF_IO[2]
+# bit 7-4: MPPSel1 2, NF_IO[3]
+# bit 12-8: MPPSel2 2, NF_IO[4]
+# bit 15-12: MPPSel3 2, NF_IO[5]
# bit 19-16: MPPSel4 1, NF_IO[6]
# bit 23-20: MPPSel5 1, NF_IO[7]
# bit 27-24: MPPSel6 1, SYSRST_O
# bit 31-28: MPPSel7 0, GPO[7]
+DATA 0xFFD10004 0x03303300
+
DATA 0xFFD10008 0x00001100 # MPP Control 2 Register
# bit 3-0: MPPSel16 0, GPIO[16]
# bit 7-4: MPPSel17 0, GPIO[17]
@@ -48,8 +50,8 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register
# bit 31-28: MPPSel23 0, GPIO[23]
DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register
-DATA 0xFFD20134 0xBBBBBBBB # L2 RAM Timing 0 Register
-DATA 0xFFD20138 0x00BBBBBB # L2 RAM Timing 1 Register
+DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register
DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register
DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register
@@ -63,7 +65,7 @@ DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register
# bit29-26: zero
# bit31-30: 01
-DATA 0xFFD01404 0x36343000 # DDR Controller Control Low
+DATA 0xFFD01404 0x39543000 # DDR Controller Control Low
# bit 3-0: 0 reserved
# bit 4: 0=addr/cmd in smame cycle
# bit 5: 0=clk is driven during self refresh, we don't care for APX
@@ -75,7 +77,7 @@ DATA 0xFFD01404 0x36343000 # DDR Controller Control Low
# bit30-28: 3 required
# bit31: 0=no additional STARTBURST delay
-DATA 0xFFD01408 0x2302544B # DDR Timing (Low) (active cycles value +1)
+DATA 0xFFD01408 0x34136552 # DDR Timing (Low) (active cycles value +1)
# bit3-0: TRAS lsbs
# bit7-4: TRCD
# bit11- 8: TRP
@@ -86,7 +88,7 @@ DATA 0xFFD01408 0x2302544B # DDR Timing (Low) (active cycles value +1)
# bit27-24: TRRD
# bit31-28: TRTP
-DATA 0xFFD0140C 0x00000032 # DDR Timing (High)
+DATA 0xFFD0140C 0x00000033 # DDR Timing (High)
# bit6-0: TRFC
# bit8-7: TR2R
# bit10-9: TR2W
@@ -116,8 +118,8 @@ DATA 0xFFD01418 0x00000000 # DDR Operation
# bit3-0: 0x0, DDR cmd
# bit31-4: 0 required
-DATA 0xFFD0141C 0x00000642 # DDR Mode
-DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+DATA 0xFFD0141C 0x00000652 # DDR Mode
+DATA 0xFFD01420 0x00000044 # DDR Extended Mode
# bit0: 0, DDR DLL enabled
# bit1: 0, DDR drive strenght normal
# bit2: 1, DDR ODT control lsd disabled
@@ -140,6 +142,8 @@ DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
# bit15-12: 1111 required
# bit31-16: 0 required
+DATA 0xFFD01428 0x00074510
+DATA 0xFFD0147c 0x00007451
DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
@@ -153,7 +157,7 @@ DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
-DATA 0xFFD01494 0x00000000 # DDR ODT Control (Low)
+DATA 0xFFD01494 0x00010001 # DDR ODT Control (Low)
# bit3-0: 0, ODT0Rd, MODT[0] asserted during read from DRAM CS0
# bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0
@@ -162,7 +166,7 @@ DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
# bit3-2: 00, ODT1 controlled by register
# bit31-4: zero, required
-DATA 0xFFD0149C 0x0000E90F # CPU ODT Control
+DATA 0xFFD0149C 0x0000FC11 # CPU ODT Control
# bit3-0: F, ODT0Rd, Internal ODT asserted during read from DRAM bank0
# bit7-4: 0, ODT0Wr, Internal ODT asserted during write to DRAM bank0
# bit9-8: 1, ODTEn, never active