summaryrefslogtreecommitdiff
path: root/board/keymile
diff options
context:
space:
mode:
authorHolger Brunck <holger.brunck@keymile.com>2011-05-31 02:12:52 +0000
committerU-Boot <uboot@lilith.(none)>2011-05-31 19:46:19 +0200
commit8612b7015400e8b897ed3aeba03baf47cfbf1e94 (patch)
tree52b02980fc960f9402216ad1251b5f8c18619405 /board/keymile
parentd3920144e132eb7f30d40d4a5ad13ae85d2e2818 (diff)
downloadu-boot-imx-8612b7015400e8b897ed3aeba03baf47cfbf1e94.zip
u-boot-imx-8612b7015400e8b897ed3aeba03baf47cfbf1e94.tar.gz
u-boot-imx-8612b7015400e8b897ed3aeba03baf47cfbf1e94.tar.bz2
arm/km: update mgcoge3un board support
We change default settings for egiga on mgcoge3un. The reason we need this is that we have the gig port on mgcoge3un connected using a back-to-back pair of PHYs. There are no magnetics and because of that the port has to be run with a fixd configuration and auto-negotiation must be disabled. In the default mode the egiga driver uses autoneg to determine port speed - which defaults to 1G (we need 100M full duplex). Add wait for the GPIO line connected to mgcoge3ne before starting mgcoge3un. A board specific ethernet present function was added, because on this board ethernet is always present. The BOCO FPGA access was enhanced and changed to use register definitions. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/keymile')
-rw-r--r--board/keymile/km_arm/km_arm.c80
1 files changed, 66 insertions, 14 deletions
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 4049a4e..d86acc9 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -41,6 +41,16 @@
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * BOCO FPGA definitions
+ */
+#define BOCO 0x10
+#define REG_CTRL_H 0x02
+#define MASK_WRL_UNITRUN 0x01
+#define MASK_RBX_PGY_PRESENT 0x40
+#define REG_IRQ_CIRQ2 0x2d
+#define MASK_RBI_DEFECT_16 0x01
+
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
MPP0_NF_IO2,
@@ -102,43 +112,64 @@ u32 kwmpp_config[] = {
0
};
+#if defined(CONFIG_MGCOGE3UN)
+/*
+ * Wait for startup OK from mgcoge3ne
+ */
+int startup_allowed(void)
+{
+ unsigned char buf;
+
+ /*
+ * Read CIRQ16 bit (bit 0)
+ */
+ if (i2c_read(BOCO, REG_IRQ_CIRQ2, 1, &buf, 1) != 0)
+ printf("%s: Error reading Boco\n", __func__);
+ else
+ if ((buf & MASK_RBI_DEFECT_16) == MASK_RBI_DEFECT_16)
+ return 1;
+ return 0;
+}
+
+/*
+ * mgcoge3un has always ethernet present. Its connected to the 6061 switch
+ * and provides ICNev and piggy4 connections.
+ */
+int ethernet_present(void)
+{
+ return 1;
+}
+#else
int ethernet_present(void)
{
uchar buf;
int ret = 0;
- if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
+ if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error reading Boco\n", __func__);
return -1;
}
- if ((buf & 0x40) == 0x40)
+ if ((buf & MASK_RBX_PGY_PRESENT) == MASK_RBX_PGY_PRESENT)
ret = 1;
return ret;
}
+#endif
int initialize_unit_leds(void)
{
/*
- * init the unit LEDs
- * per default they all are
+ * Init the unit LEDs per default they all are
* ok apart from bootstat
- * LED connected through BOCO
- * BOCO lies at the address 0x10
- * LEDs are in the block CTRL_H (addr 0x02)
- * BOOTSTAT LED is the first 0x01
*/
- #define BOCO 0x10
- #define CTRL_H 0x02
- #define APPLEDMASK 0x01
uchar buf;
- if (i2c_read(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+ if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error reading Boco\n", __func__);
return -1;
}
- buf |= APPLEDMASK;
- if (i2c_write(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+ buf |= MASK_WRL_UNITRUN;
+ if (i2c_write(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error writing Boco\n", __func__);
return -1;
}
@@ -167,6 +198,27 @@ int misc_init_r(void)
printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
gd->bd->bi_arch_number = mach_type;
}
+#if defined(CONFIG_MGCOGE3UN)
+ char *wait_for_ne;
+ wait_for_ne = getenv("waitforne");
+ if (wait_for_ne != NULL) {
+ if (strcmp(wait_for_ne, "true") == 0) {
+ int cnt = 0;
+ puts("NE go: ");
+ while (startup_allowed() == 0) {
+ udelay(200000);
+ cnt++;
+ if (cnt == 5)
+ puts("wait\b\b\b\b");
+ if (cnt == 10) {
+ cnt = 0;
+ puts(" \b\b\b\b");
+ }
+ }
+ puts("OK\n");
+ }
+ }
+#endif
initialize_unit_leds();
set_km_env();