powerpc: ppc4xx: remove JSE board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Williams <steve@icarus.com>

1 files changed, 0 insertions, 77 deletions

diff --git a/board/jse/host_bridge.c b/board/jse/host_bridge.c
deleted file mode 100644
index 76c07b0..0000000
--- a/board/jse/host_bridge.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (c) 2004 Picture Elements, Inc.
- *    Stephen Williams (steve@icarus.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ident "$Id:$"
-
-# include  <common.h>
-# include  <pci.h>
-# include  "jse_priv.h"
-
-/*
- * The JSE board has an Intel 21555 non-transparent bridge for
- * communication with the host. We need to render it harmless on the
- * JSE side, but leave it alone on the host (primary) side. Normally,
- * this will all be done before the host BIOS can gain access to the
- * board, due to the Primary Access Lockout bit.
- *
- * The host_bridge_init function is called as a late initialization
- * function, after most of the board is set up, including a PCI scan.
- */
-
-void host_bridge_init (void)
-{
-	/* The bridge chip is at a fixed location. */
-	pci_dev_t dev = PCI_BDF (0, 10, 0);
-
-	/* Set PCI Class code --
-	   The primary side sees this class code at 0x08 in the
-	   primary config space. This must be something other then a
-	   bridge, or MS Windows starts doing weird stuff to me. */
-	pci_write_config_dword (dev, 0x48, 0x04800000);
-
-	/* Set subsystem ID --
-	   The primary side sees this value at 0x2c. We set it here so
-	   that the host can tell what sort of device this is:
-	   We are a Picture Elements [0x12c5] JSE [0x008a]. */
-	pci_write_config_dword (dev, 0x6c, 0x008a12c5);
-
-	/* Downstream (Primary-to-Secondary) BARs are set up mostly
-	   off. We need only the Memory-0 Bar so that the host can get
-	   at the CSR region to set up tables and the lot. */
-
-	/* Downstream Memory 0 setup (4K for CSR) */
-	pci_write_config_dword (dev, 0xac, 0xfffff000);
-	/* Downstream Memory 1 setup (off) */
-	pci_write_config_dword (dev, 0xb0, 0x00000000);
-	/* Downstream Memory 2 setup (off) */
-	pci_write_config_dword (dev, 0xb4, 0x00000000);
-	/* Downstream Memory 3 setup (off) */
-	pci_write_config_dword (dev, 0xb8, 0x00000000);
-
-	/* Upstream (Secondary-to-Primary) BARs are used to get at
-	   host memory from the JSE card. Create two regions: a small
-	   one to manage individual word reads/writes, and a larger
-	   one for doing bulk frame moves. */
-
-	/* Upstream Memory 0 Setup -- (BAR2) 4K non-prefetchable */
-	pci_write_config_dword (dev, 0xc4, 0xfffff000);
-	/* Upstream Memory 1 setup -- (BAR3) 4K non-prefetchable */
-	pci_write_config_dword (dev, 0xc8, 0xfffff000);
-
-	/* Upstream Memory 2 (BAR4) uses page translation, and is set
-	   up in CCR1. Configure for 4K pages. */
-
-	/* Set CCR1,0 reigsters. This clears the Primary PCI Lockout
-	   bit as well, so we are done configuring after this
-	   point. Therefore, this must be the last step.
-
-	   CC1[15:12]= 0  (disable I2O message unit)
-	   CC1[11:8] = 0x5 (4K page size)
-	   CC0[11]   = 1  (Secondary Clock Disable: disable clock)
-	   CC0[10]   = 0  (Primary Access Lockout: allow primary access)
-	 */
-	pci_write_config_dword (dev, 0xcc, 0x05000800);
-}