Update make target for ARM supported boards.

Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005

1 files changed, 214 insertions, 0 deletions

diff --git a/board/integratorcp/lowlevel_init.S b/board/integratorcp/lowlevel_init.S
new file mode 100644
index 0000000..e679215
--- /dev/null
+++ b/board/integratorcp/lowlevel_init.S
@@ -0,0 +1,214 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003, ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+/* Reset using CM control register */
+.global reset_cpu
+reset_cpu:
+	mov	r0, #CM_BASE
+	ldr	r1,[r0,#OS_CTRL]
+	orr	r1,r1,#CMMASK_RESET
+	str	r1,[r0,#OS_CTRL]
+
+reset_failed:
+	b	reset_failed
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+	/* If U-Boot has been run after the ARM boot monitor
+	 * then all the necessary actions have been done
+	 * otherwise we are running from user flash mapped to 0x00000000
+	 * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
+	 * Changes to the (possibly soft) reset defaults of the processor
+	 * itself should be performed in cpu/arm<>/start.S
+	 * This function affects only the core module or board settings
+	 */
+
+#ifdef CONFIG_CM_INIT
+	/* CM has an initialization register
+	 * - bits in it are wired into test-chip pins to force
+	 *   reset defaults
+	 * - may need to change its contents for U-Boot
+	 */
+
+	/* set the desired CM specific value */
+	mov	r2,#CMMASK_LOWVEC	/* Vectors at 0x00000000 for all */
+
+#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
+	orr	r2,r2,#CMMASK_INIT_102
+#else
+
+#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
+    !defined (CONFIG_CM940T)
+    /* CMxx6 code */
+
+#ifdef	CONFIG_CM_MULTIPLE_SSRAM
+	/* set simple mapping		  */
+	and	r2,r2,#CMMASK_MAP_SIMPLE
+#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
+
+#ifdef	CONFIG_CM_TCRAM
+	/* disable TCRAM		  */
+	and	r2,r2,#CMMASK_TCRAM_DISABLE
+#endif /* #ifdef CONFIG_CM_TCRAM	  */
+
+#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
+	    defined (CONFIG_CM1136JF_S)
+
+	and	r2,r2,#CMMASK_LE
+
+#endif /* cpu with little endian initialization */
+
+	orr	r2,r2,#CMMASK_CMxx6_COMMON
+
+#endif /* CMxx6 code */
+
+#endif /* ARM102xxE value */
+
+	/* read CM_INIT	   */
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_INIT]
+	/* check against desired bit setting */
+	and	r3,r1,r2
+	cmp	r3,r2
+	beq	init_reg_OK
+
+	/* lock for change */
+	mov	r3, #CMVAL_LOCK1
+	and	r3, r3, #CMVAL_LOCK2
+	str	r3, [r0, #OS_LOCK]
+	/* set desired value */
+	orr	r1,r1,r2
+	/* write & relock CM_INIT */
+	str	r1, [r0, #OS_INIT]
+	mov	r1, #CMVAL_UNLOCK
+	str	r1, [r0, #OS_LOCK]
+
+	/* soft reset so new values used */
+	b	reset_cpu
+
+init_reg_OK:
+
+#endif /* CONFIG_CM_INIT */
+
+	mov	pc, lr
+
+#ifdef	CONFIG_CM_SPD_DETECT
+	/* Fast memory is available for the DRAM data
+	 * - ensure it has been transferred, then summarize the data
+	 *   into a CM register
+	 */
+.globl dram_query
+dram_query:
+	stmfd	r13!,{r4-r6,lr}
+	/* set up SDRAM info				  */
+	/* - based on example code from the CM User Guide */
+	mov	r0, #CM_BASE
+
+readspdbit:
+	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register */
+	and	r1, r1, #0x20		/* mask SPD bit (5)	   */
+	cmp	r1, #0x20		/* test if set		   */
+	bne	readspdbit
+
+setupsdram:
+	add	r0, r0, #OS_SPD		/* address the copy of the SDP data */
+	ldrb	r1, [r0, #3]		/* number of row address lines	    */
+	ldrb	r2, [r0, #4]		/* number of column address lines   */
+	ldrb	r3, [r0, #5]		/* number of banks		    */
+	ldrb	r4, [r0, #31]		/* module bank density		    */
+	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)  */
+	mov	r5, r5, ASL#2		/* size in MB			    */
+	mov	r0, #CM_BASE		/* reload for later code	    */
+	cmp	r5, #0x10		/* is it 16MB?			    */
+	bne	not16
+	mov	r6, #0x2		/* store size and CAS latency of 2  */
+	b	writesize
+
+not16:
+	cmp	r5, #0x20		/* is it  32MB? */
+	bne	not32
+	mov	r6, #0x6
+	b	writesize
+
+not32:
+	cmp	r5, #0x40		/* is it  64MB? */
+	bne	not64
+	mov	r6, #0xa
+	b	writesize
+
+not64:
+	cmp	r5, #0x80		/* is it 128MB? */
+	bne	not128
+	mov	r6, #0xe
+	b	writesize
+
+not128:
+	/* if it is none of these sizes then it is either 256MB, or
+	 * there is no SDRAM fitted so default to 256MB
+	 */
+	mov	r6, #0x12
+
+writesize:
+	mov	r1, r1, ASL#8		/* row addr lines from SDRAM reg */
+	orr	r2, r1, r2, ASL#12	/* OR in column address lines	 */
+	orr	r3, r2, r3, ASL#16	/* OR in number of banks	 */
+	orr	r6, r6, r3		/* OR in size and CAS latency	 */
+	str	r6, [r0, #OS_SDRAM]	/* store SDRAM parameters	 */
+
+#endif /* #ifdef CONFIG_CM_SPD_DETECT */
+
+	ldmfd	r13!,{r4-r6,pc}			/* back to caller */
+
+#ifdef	CONFIG_CM_REMAP
+	/* CM remap bit is operational
+	 * - use it to map writeable memory at 0x00000000, in place of flash
+	 */
+.globl cm_remap
+cm_remap:
+	stmfd	r13!,{r4-r10,lr}
+
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_CTRL]
+	orr	r1, r1, #CMMASK_REMAP	/* set remap and led bits */
+	str	r1, [r0, #OS_CTRL]
+
+	/* Now 0x00000000 is writeable, replace the vectors  */
+	ldr	r0, =_start	/* r0 <- start of vectors	    */
+	ldr	r2, =_armboot_start	/* r2 <- past vectors		    */
+	sub	r1,r1,r1		/* destination 0x00000000	    */
+
+copy_vec:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end address [r2]    */
+	ble	copy_vec
+
+	ldmfd	r13!,{r4-r10,pc}	/* back to caller		    */
+
+#endif /* #ifdef CONFIG_CM_REMAP */