move ARM Ltd. to vendor dir

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

7 files changed, 0 insertions, 1580 deletions

diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile
deleted file mode 100644
index 79f501a..0000000
--- a/board/integratorap/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004
-# ARM Ltd.
-# Philippe Robin, <philippe.robin@arm.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= integratorap.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/integratorap/config.mk b/board/integratorap/config.mk
deleted file mode 100644
index e4c5c3b..0000000
--- a/board/integratorap/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-TEXT_BASE = 0x01000000
-
-ifneq ($(OBJTREE),$(SRCTREE))
-# We are building u-boot in a separate directory, use generated
-# .lds script from OBJTREE directory.
-LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
-endif
diff --git a/board/integratorap/flash.c b/board/integratorap/flash.c
deleted file mode 100644
index 0492be7..0000000
--- a/board/integratorap/flash.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)			__swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)			__swab32(x)
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
-	unsigned int sector_number;
-	unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256L18T[] = {
-	{4, 32 * 1024},				/* 4 * 32kBytes sectors */
-	{255, 128 * 1024},			/* 255 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-	OrgDef *pOrgDef;
-
-	pOrgDef = OrgIntel_28F256L18T;
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			if (i > 255) {
-				info->start[i] = base + (i * 0x8000);
-				info->protect[i] = 0;
-			} else {
-				info->start[i] = base +
-						(i * PHYS_FLASH_SECT_SIZE);
-				info->protect[i] = 0;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F256L18T:
-		printf ("FLASH 28F256L18T\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);		/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];	/* device ID        */
-	switch (value) {
-
-	case (FPW) (INTEL_ID_28F256L18T):
-		info->flash_id += FLASH_28F256L18T;
-		info->sector_count = 259;
-		info->size = 0x02000000;
-		break;			/* => 32 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK    0x0080
-
-	*addr = (FPW) 0x00500050;	/* clear status register */
-
-	/* this sends the clear lock bit command */
-	*addr = (FPW) 0x00600060;
-	*addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-				info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-				prot);
-	} else {
-		printf ("\n");
-	}
-
-
-	start = get_timer (0);
-	last = start;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			flash_unprotect_sectors (addr);
-
-			/* arm simple, non interrupt dependent timer */
-			reset_timer_masked ();
-
-			*addr = (FPW) 0x00500050;/* clear status register */
-			*addr = (FPW) 0x00200020;/* erase setup */
-			*addr = (FPW) 0x00D000D0;/* erase confirm */
-
-			while (((status =
-				*addr) & (FPW) 0x00800080) !=
-				(FPW) 0x00800080) {
-					if (get_timer_masked () >
-					CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					/* suspend erase     */
-					*addr = (FPW) 0x00B000B0;
-					/* reset to read mode */
-					*addr = (FPW) 0x00FF00FF;
-					rcode = 1;
-					break;
-				}
-			}
-
-			/* clear status register cmd.   */
-			*addr = (FPW) 0x00500050;
-			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
-		return (2);
-	}
-	flash_unprotect_sectors (addr);
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked ();
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-			return (1);
-		}
-	}
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
deleted file mode 100644
index ddacabb..0000000
--- a/board/integratorap/integratorap.c
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void flash__init (void);
-void ether__init (void);
-void peripheral_power_enable (void);
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
-	printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* arch number of Integrator Board */
-	gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	gd->flags = 0;
-
-#ifdef CONFIG_CM_REMAP
-extern void cm_remap(void);
-	cm_remap();	/* remaps writeable memory to 0x00000000 */
-#endif
-
-	icache_enable ();
-
-	flash__init ();
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_PCI
-	pci_init();
-#endif
-	setenv("verify", "n");
-	return (0);
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifdef CONFIG_PCI
-
-#ifndef CONFIG_PCI_PNP
-
-static struct pci_config_table pci_integrator_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ }
-};
-#endif
-
-/* V3 access routines */
-#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
-#define _V3Read16(o)	(*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
-
-#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
-#define _V3Read32(o)	(*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
-
-/* Compute address necessary to access PCI config space for the given */
-/* bus and device. */
-#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({				\
-	unsigned int __address, __devicebit;						\
-	unsigned short __mapaddress;							\
-	unsigned int __dev = PCI_DEV (__devfn); /* FIXME to check!! (slot?) */		\
-											\
-	if (__bus == 0) {								\
-		/* local bus segment so need a type 0 config cycle */			\
-		/* build the PCI configuration "address" with one-hot in A31-A11 */	\
-		__address = PCI_CONFIG_BASE;						\
-		__address |= ((__devfn & 0x07) << 8);					\
-		__address |= __offset & 0xFF;						\
-		__mapaddress = 0x000A;	/* 101=>config cycle, 0=>A1=A0=0 */		\
-		__devicebit = (1 << (__dev + 11));					\
-											\
-		if ((__devicebit & 0xFF000000) != 0) {					\
-			/* high order bits are handled by the MAP register */		\
-			__mapaddress |= (__devicebit >> 16);				\
-		} else {								\
-			/* low order bits handled directly in the address */		\
-			__address |= __devicebit;					\
-		}									\
-	} else {		/* bus !=0 */						\
-		/* not the local bus segment so need a type 1 config cycle */		\
-		/* A31-A24 are don't care (so clear to 0) */				\
-		__mapaddress = 0x000B;	/* 101=>config cycle, 1=>A1&A0 from PCI_CFG */	\
-		__address = PCI_CONFIG_BASE;						\
-		__address |= ((__bus & 0xFF) << 16);	/* bits 23..16 = bus number	*/  \
-		__address |= ((__dev & 0x1F) << 11);	/* bits 15..11 = device number	*/  \
-		__address |= ((__devfn & 0x07) << 8);	/* bits 10..8  = function number */ \
-		__address |= __offset & 0xFF;	/* bits	 7..0  = register number */	\
-	}										\
-	_V3Write16 (V3_LB_MAP1, __mapaddress);						\
-	__address;									\
-})
-
-/* _V3OpenConfigWindow - open V3 configuration window */
-#define _V3OpenConfigWindow() {								\
-	/* Set up base0 to see all 512Mbytes of memory space (not	     */		\
-	/* prefetchable), this frees up base1 for re-use by configuration*/		\
-	/* memory */									\
-											\
-	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
-				     0x90 | V3_LB_BASE_M_ENABLE));			\
-	/* Set up base1 to point into configuration space, note that MAP1 */		\
-	/* register is set up by pciMakeConfigAddress(). */				\
-											\
-	_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) |			\
-				     0x40 | V3_LB_BASE_M_ENABLE));			\
-}
-
-/* _V3CloseConfigWindow - close V3 configuration window */
-#define _V3CloseConfigWindow() {							\
-    /* Reassign base1 for use by prefetchable PCI memory */				\
-	_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000)	\
-					| 0x84 | V3_LB_BASE_M_ENABLE));			\
-	_V3Write16 (V3_LB_MAP1,								\
-	    (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006);	\
-											\
-	/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */	\
-											\
-	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
-			     0x80 | V3_LB_BASE_M_ENABLE));				\
-}
-
-static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
-				     int offset, unsigned char *val)
-{
-	_V3OpenConfigWindow ();
-	*val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-							       PCI_FUNC (dev),
-							       offset);
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-
-static int pci_integrator_read__word (struct pci_controller *hose,
-				      pci_dev_t dev, int offset,
-				      unsigned short *val)
-{
-	_V3OpenConfigWindow ();
-	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-								PCI_FUNC (dev),
-								offset);
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-
-static int pci_integrator_read_dword (struct pci_controller *hose,
-				      pci_dev_t dev, int offset,
-				      unsigned int *val)
-{
-	_V3OpenConfigWindow ();
-	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-								PCI_FUNC (dev),
-								offset);
-	*val |= (*(volatile unsigned int *)
-		 PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
-				     (offset + 2))) << 16;
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-
-static int pci_integrator_write_byte (struct pci_controller *hose,
-				      pci_dev_t dev, int offset,
-				      unsigned char val)
-{
-	_V3OpenConfigWindow ();
-	*(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-							PCI_FUNC (dev),
-							offset) = val;
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-
-static int pci_integrator_write_word (struct pci_controller *hose,
-				      pci_dev_t dev, int offset,
-				      unsigned short val)
-{
-	_V3OpenConfigWindow ();
-	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-							 PCI_FUNC (dev),
-							 offset) = val;
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-
-static int pci_integrator_write_dword (struct pci_controller *hose,
-				       pci_dev_t dev, int offset,
-				       unsigned int val)
-{
-	_V3OpenConfigWindow ();
-	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-							 PCI_FUNC (dev),
-							 offset) = (val & 0xFFFF);
-	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
-							 PCI_FUNC (dev),
-							 (offset + 2)) = ((val >> 16) & 0xFFFF);
-	_V3CloseConfigWindow ();
-
-	return 0;
-}
-/******************************
- * PCI initialisation
- ******************************/
-
-struct pci_controller integrator_hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_integrator_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
-	volatile int i, j;
-	struct pci_controller *hose = &integrator_hose;
-
-	/* setting this register will take the V3 out of reset */
-
-	*(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
-
-	/* wait a few usecs to settle the device and the PCI bus */
-
-	for (i = 0; i < 100; i++)
-		j = i + 1;
-
-	/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
-
-	*(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
-		(unsigned short) (V3_BASE >> 16);
-
-	do {
-		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
-		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
-			0x55;
-	} while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
-		 || *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
-						 4) != 0x55);
-
-	/* Make sure that V3 register access is not locked, if it is, unlock it */
-
-	if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
-	     V3_SYSTEM_M_LOCK)
-	    == V3_SYSTEM_M_LOCK)
-		*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
-
-	/* Ensure that the slave accesses from PCI are disabled while we */
-	/* setup windows */
-
-	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
-		~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
-
-	/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
-
-	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
-		~V3_SYSTEM_M_RST_OUT;
-
-	/* Make all accesses from PCI space retry until we're ready for them */
-
-	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
-		V3_PCI_CFG_M_RETRY_EN;
-
-	/* Set up any V3 PCI Configuration Registers that we absolutely have to */
-	/* LB_CFG controls Local Bus protocol. */
-	/* Enable LocalBus byte strobes for READ accesses too. */
-	/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
-
-	*(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
-
-	/* PCI_CMD controls overall PCI operation. */
-	/* Enable PCI bus master. */
-
-	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
-
-	/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
-
-	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
-		(INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
-					      V3_PCI_MAP_M_REG_EN |
-					      V3_PCI_MAP_M_ENABLE);
-
-	/* PCI_BASE0 is the PCI address of the start of the window */
-
-	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
-		INTEGRATOR_BOOT_ROM_BASE;
-
-	/* PCI_MAP1 is LOCAL address of the start of the window */
-
-	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
-		(INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
-						V3_PCI_MAP_M_REG_EN |
-						V3_PCI_MAP_M_ENABLE);
-
-	/* PCI_BASE1 is the PCI address of the start of the window */
-
-	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
-		INTEGRATOR_HDR0_SDRAM_BASE;
-
-	/* Set up the windows from local bus memory into PCI configuration, */
-	/* I/O and Memory. */
-	/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
-
-	*(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
-		((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
-	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
-
-	/* PCI Configuration, use LB_BASE1/LB_MAP1. */
-
-	/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
-	/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
-	/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
-
-	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
-		INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
-
-	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
-		((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
-
-	/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
-
-	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
-		INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
-
-	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
-		(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
-
-	/* Allow accesses to PCI Configuration space */
-	/* and set up A1, A0 for type 1 config cycles */
-
-	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
-		((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
-		 ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
-		V3_PCI_CFG_M_AD_LOW0;
-
-	/* now we can allow in PCI MEMORY accesses */
-
-	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
-		(*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
-		V3_COMMAND_M_MEM_EN;
-
-	/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
-	/* initialise and lock the V3 system register so that no one else */
-	/* can play with it */
-
-	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
-		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
-		V3_SYSTEM_M_RST_OUT;
-
-	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
-		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
-		V3_SYSTEM_M_LOCK;
-
-	/*
-	 * Register the hose
-	 */
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	/* System memory space */
-	pci_set_region (hose->regions + 0,
-			0x00000000, 0x40000000, 0x01000000,
-			PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-	/* PCI Memory - config space */
-	pci_set_region (hose->regions + 1,
-			0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
-
-	/* PCI V3 regs */
-	pci_set_region (hose->regions + 2,
-			0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
-
-	/* PCI I/O space */
-	pci_set_region (hose->regions + 3,
-			0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
-
-	pci_set_ops (hose,
-		     pci_integrator_read_byte,
-		     pci_integrator_read__word,
-		     pci_integrator_read_dword,
-		     pci_integrator_write_byte,
-		     pci_integrator_write_word, pci_integrator_write_dword);
-
-	hose->region_count = 4;
-
-	pci_register_hose (hose);
-
-	pciauto_config_init (hose);
-	pciauto_config_device (hose, 0);
-
-	hose->last_busno = pci_hose_scan (hose);
-}
-#endif
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size	 = PHYS_SDRAM_1_SIZE;
-
-#ifdef CONFIG_CM_SPD_DETECT
-	{
-extern void dram_query(void);
-	unsigned long cm_reg_sdram;
-	unsigned long sdram_shift;
-
-	dram_query();	/* Assembler accesses to CM registers */
-			/* Queries the SPD values	      */
-
-	/* Obtain the SDRAM size from the CM SDRAM register */
-
-	cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
-	/*   Register	      SDRAM size
-	 *
-	 *   0xXXXXXXbbb000bb	 16 MB
-	 *   0xXXXXXXbbb001bb	 32 MB
-	 *   0xXXXXXXbbb010bb	 64 MB
-	 *   0xXXXXXXbbb011bb	128 MB
-	 *   0xXXXXXXbbb100bb	256 MB
-	 *
-	 */
-	sdram_shift		 = ((cm_reg_sdram & 0x0000001C)/4)%4;
-	gd->bd->bi_dram[0].size	 = 0x01000000 << sdram_shift;
-
-	}
-#endif /* CM_SPD_DETECT */
-
-	return 0;
-}
-
-/* The Integrator/AP timer1 is clocked at 24MHz
- * can be divided by 16 or 256
- * and is a 16-bit counter
- */
-/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
-static ulong timestamp;		/* U-Boot ticks since startup	      */
-static ulong total_count = 0;	/* Total timer count		      */
-static ulong lastdec;		/* Timer reading at last call	      */
-static ulong div_clock	 = 256; /* Divisor applied to the timer clock */
-static ulong div_timer	 = 1;	/* Divisor to convert timer reading
-				 * change to U-Boot ticks
-				 */
-/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-
-#define TIMER_LOAD_VAL 0x0000FFFFL
-#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
-
-/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
- *  - unless otherwise stated
- */
-
-/* starts a counter
- * - the Integrator/AP timer issues an interrupt
- *   each time it reaches zero
- */
-int interrupt_init (void)
-{
-	/* Load timer with initial value */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
-	/* Set timer to be
-	 *	enabled		  1
-	 *	free-running	  0
-	 *	XX		 00
-	 *	divider 256	 10
-	 *	XX		 00
-	 */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
-	total_count = 0;
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	div_timer  = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
-	div_timer /= div_clock;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base_ticks)
-{
-	return get_timer_masked () - base_ticks;
-}
-
-void set_timer (ulong ticks)
-{
-	timestamp = ticks;
-	total_count = ticks * div_timer;
-	reset_timer_masked();
-}
-
-/* delay x useconds */
-void udelay (unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	/* Convert to U-Boot ticks */
-	tmo  = usec * CONFIG_SYS_HZ;
-	tmo /= (1000000L);
-
-	tmp  = get_timer_masked();	/* get current timestamp */
-	tmo += tmp;			/* wake up timestamp	 */
-
-	while (get_timer_masked () < tmo) { /* loop till event */
-		/*NOP*/;
-	}
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec	  = READ_TIMER; /* capture current decrementer value   */
-	timestamp = 0;		/* start "advancing" time stamp from 0 */
-}
-
-/* converts the timer reading to U-Boot ticks	       */
-/* the timestamp is the number of ticks since reset    */
-/* This routine does not detect wraps unless called regularly
-   ASSUMES a call at least every 16 seconds to detect every reload */
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;		/* current count */
-
-	if (now > lastdec) {
-		/* Must have wrapped */
-		total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
-	} else {
-		total_count += lastdec - now;
-	}
-	lastdec	  = now;
-	timestamp = total_count/div_timer;
-
-	return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-	udelay(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * Return the timebase clock frequency
- * i.e. how often the timer decrements
- */
-ulong get_tbclk (void)
-{
-	return CONFIG_SYS_HZ_CLOCK/div_clock;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/integratorap/lowlevel_init.S b/board/integratorap/lowlevel_init.S
deleted file mode 100644
index ab9589c..0000000
--- a/board/integratorap/lowlevel_init.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-	/* Reset using CM control register */
-.global reset_cpu
-reset_cpu:
-	mov	r0, #CM_BASE
-	ldr	r1,[r0,#OS_CTRL]
-	orr	r1,r1,#CMMASK_RESET
-	str	r1,[r0,#OS_CTRL]
-
-reset_failed:
-	b	reset_failed
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-	/* If U-Boot has been run after the ARM boot monitor
-	 * then all the necessary actions have been done
-	 * otherwise we are running from user flash mapped to 0x00000000
-	 * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
-	 * Changes to the (possibly soft) reset defaults of the processor
-	 * itself should be performed in cpu/arm<>/start.S
-	 * This function affects only the core module or board settings
-	 */
-
-#ifdef CONFIG_CM_INIT
-	/* CM has an initialization register
-	 * - bits in it are wired into test-chip pins to force
-	 *   reset defaults
-	 * - may need to change its contents for U-Boot
-	 */
-
-	/* set the desired CM specific value */
-	mov	r2,#CMMASK_LOWVEC	/* Vectors at 0x00000000 for all */
-
-#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
-	orr	r2,r2,#CMMASK_INIT_102
-#else
-
-#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
-     !defined (CONFIG_CM940T)
-
-#ifdef	CONFIG_CM_MULTIPLE_SSRAM
-	/* set simple mapping			*/
-	and	r2,r2,#CMMASK_MAP_SIMPLE
-#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM	*/
-
-#ifdef	CONFIG_CM_TCRAM
-	/* disable TCRAM			*/
-	and	r2,r2,#CMMASK_TCRAM_DISABLE
-#endif /* #ifdef CONFIG_CM_TCRAM		*/
-
-#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
-     defined (CONFIG_CM1136JF_S)
-
-	and	r2,r2,#CMMASK_LE
-
-#endif /* cpu with little endian initialization */
-
-	orr	r2,r2,#CMMASK_CMxx6_COMMON
-
-#endif /* CMxx6 code */
-
-#endif /* ARM102xxE value */
-
-	/* read CM_INIT		 */
-	mov	r0, #CM_BASE
-	ldr	r1, [r0, #OS_INIT]
-	/* check against desired bit setting */
-	and	r3,r1,r2
-	cmp	r3,r2
-	beq	init_reg_OK
-
-	/* lock for change */
-	mov	r3, #CMVAL_LOCK1
-	add	r3,r3,#CMVAL_LOCK2
-	str	r3, [r0, #OS_LOCK]
-	/* set desired value */
-	orr	r1,r1,r2
-	/* write & relock CM_INIT */
-	str	r1, [r0, #OS_INIT]
-	mov	r1, #CMVAL_UNLOCK
-	str	r1, [r0, #OS_LOCK]
-
-	/* soft reset so new values used */
-	b	reset_cpu
-
-init_reg_OK:
-
-#endif /* CONFIG_CM_INIT */
-
-	mov	pc, lr
-
-#ifdef	CONFIG_CM_SPD_DETECT
-	/* Fast memory is available for the DRAM data
-	 * - ensure it has been transferred, then summarize the data
-	 *   into a CM register
-	 */
-.globl dram_query
-dram_query:
-	stmfd	r13!,{r4-r6,lr}
-	/* set up SDRAM info					*/
-	/* - based on example code from the CM User Guide */
-	mov	r0, #CM_BASE
-
-readspdbit:
-	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register	*/
-	and	r1, r1, #0x20		/* mask SPD bit (5)		*/
-	cmp	r1, #0x20		/* test if set			*/
-	bne	readspdbit
-
-setupsdram:
-	add	r0, r0, #OS_SPD		/* address the copy of the SDP data	*/
-	ldrb	r1, [r0, #3]		/* number of row address lines		*/
-	ldrb	r2, [r0, #4]		/* number of column address lines	*/
-	ldrb	r3, [r0, #5]		/* number of banks			*/
-	ldrb	r4, [r0, #31]		/* module bank density			*/
-	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)	*/
-	mov	r5, r5, ASL#2		/* size in MB				*/
-	mov	r0, #CM_BASE		/* reload for later code		*/
-	cmp	r5, #0x10		/* is it 16MB?				*/
-	bne	not16
-	mov	r6, #0x2		/* store size and CAS latency of 2	*/
-	b	writesize
-
-not16:
-	cmp	r5, #0x20		/* is it  32MB? */
-	bne	not32
-	mov	r6, #0x6
-	b	writesize
-
-not32:
-	cmp	r5, #0x40		/* is it  64MB? */
-	bne	not64
-	mov	r6, #0xa
-	b	writesize
-
-not64:
-	cmp	r5, #0x80		/* is it 128MB? */
-	bne	not128
-	mov	r6, #0xe
-	b	writesize
-
-not128:
-	/* if it is none of these sizes then it is either 256MB, or
-	 * there is no SDRAM fitted so default to 256MB
-	 */
-	mov	r6, #0x12
-
-writesize:
-	mov	r1, r1, ASL#8		/* row addr lines from SDRAM reg */
-	orr	r2, r1, r2, ASL#12	/* OR in column address lines	 */
-	orr	r3, r2, r3, ASL#16	/* OR in number of banks	 */
-	orr	r6, r6, r3		/* OR in size and CAS latency	 */
-	str	r6, [r0, #OS_SDRAM]	/* store SDRAM parameters	 */
-
-#endif /* #ifdef CONFIG_CM_SPD_DETECT */
-
-	ldmfd	r13!,{r4-r6,pc}			/* back to caller */
-
-#ifdef	CONFIG_CM_REMAP
-	/* CM remap bit is operational
-	 * - use it to map writeable memory at 0x00000000, in place of flash
-	 */
-.globl cm_remap
-cm_remap:
-	stmfd	r13!,{r4-r10,lr}
-
-	mov	r0, #CM_BASE
-	ldr	r1, [r0, #OS_CTRL]
-	orr	r1, r1, #CMMASK_REMAP	/* set remap and led bits */
-	str	r1, [r0, #OS_CTRL]
-
-	/* Now 0x00000000 is writeable, replace the vectors	*/
-	ldr	r0, =_start	/* r0 <- start of vectors	*/
-	ldr	r2, =_armboot_start	/* r2 <- past vectors	*/
-	sub	r1,r1,r1		/* destination 0x00000000	*/
-
-copy_vec:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]	*/
-	stmia	r1!, {r3-r10}		/* copy to	 target address [r1]	*/
-	cmp	r0, r2			/* until source end address [r2]	*/
-	ble	copy_vec
-
-	ldmfd	r13!,{r4-r10,pc}	/* back to caller			*/
-
-#endif /* #ifdef CONFIG_CM_REMAP */
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
deleted file mode 100755
index 8c54250..0000000
--- a/board/integratorap/split_by_variant.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/bin/sh
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-echo -n	"/* Integrator configuration implied "	 > tmp.fil
-echo	" by Makefile target */"		>> tmp.fil
-echo -n	"#define CONFIG_INTEGRATOR"		>> tmp.fil
-echo	" /* Integrator board */"		>> tmp.fil
-echo -n	"#define CONFIG_ARCH_INTEGRATOR"	>> tmp.fil
-echo	" 1 /* Integrator/AP	 */"		>> tmp.fil
-# ---------------------------------------------------------
-#	Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$1" = "" ]
-then
-	echo "$0:: No parameters - using arm_intcm"
-else
-	case "$1" in
-	ap7_config)
-	cpu="arm_intcm"
-	variant="unported core module CM7TDMI"
-	;;
-
-	ap966)
-	cpu="arm_intcm"
-	variant="unported core module CM966E-S"
-	;;
-
-	ap922_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T"
-	;;
-
-	integratorap_config	|	\
-	ap_config)
-	cpu="arm_intcm"
-	variant="unspecified core module"
-	;;
-
-	ap720t_config)
-	cpu="arm720t"
-	echo -n	"#define CONFIG_CM720T"			>> tmp.fil
-	echo	" 1 /* CPU core is ARM720T */ "		>> tmp.fil
-	variant="Core module CM720T"
-	;;
-
-	ap922_XA10_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T_XA10"
-	echo -n	"#define CONFIG_CM922T_XA10"		>> tmp.fil
-	echo	" 1 /* CPU core is ARM922T_XA10 */"	>> tmp.fil
-	;;
-
-	ap920t_config)
-	cpu="arm920t"
-	variant="Core module CM920T"
-	echo -n	"#define CONFIG_CM920T"			>> tmp.fil
-	echo	" 1 /* CPU core is ARM920T */"		>> tmp.fil
-	;;
-
-	ap926ejs_config)
-	cpu="arm926ejs"
-	variant="Core module CM926EJ-S"
-	echo -n	"#define CONFIG_CM926EJ_S"		>> tmp.fil
-	echo	" 1 /* CPU core is ARM926EJ-S */ "	>> tmp.fil
-	;;
-
-	ap946es_config)
-	cpu="arm946es"
-	variant="Core module CM946E-S"
-	echo -n	"#define CONFIG_CM946E_S"		>> tmp.fil
-	echo	" 1 /* CPU core is ARM946E-S */ "	>> tmp.fil
-	;;
-
-	*)
-	echo "$0:: Unknown core module"
-	variant="unknown core module"
-	cpu="arm_intcm"
-	;;
-
-	esac
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
-	echo "/* Core module undefined/not ported */"	>> tmp.fil
-	echo "#define CONFIG_ARM_INTCM 1"		>> tmp.fil
-	echo -n	"#undef CONFIG_CM_MULTIPLE_SSRAM"	>> tmp.fil
-	echo -n	"	/* CM may not have "		>> tmp.fil
-	echo	"multiple SSRAM mapping */"		>> tmp.fil
-	echo -n	"#undef CONFIG_CM_SPD_DETECT "		>> tmp.fil
-	echo -n	" /* CM may not support SPD "		>> tmp.fil
-	echo	"query */"				>> tmp.fil
-	echo -n	"#undef CONFIG_CM_REMAP	"		>> tmp.fil
-	echo -n	" /* CM may not support "		>> tmp.fil
-	echo	"remapping */"				>> tmp.fil
-	echo -n	"#undef CONFIG_CM_INIT	"		>> tmp.fil
-	echo -n	" /* CM may not have	"		>> tmp.fil
-	echo	"initialization reg */"			>> tmp.fil
-	echo -n	"#undef CONFIG_CM_TCRAM	"		>> tmp.fil
-	echo	" /* CM may not have TCRAM */"		>> tmp.fil
-fi
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/integratorap
-mv tmp.fil ${obj}include/config.h
-# ---------------------------------------------------------
-#	Ensure correct core object loaded first in U-Boot image
-# ---------------------------------------------------------
-sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorap/u-boot.lds.template > ${obj}board/integratorap/u-boot.lds
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a integratorap arm $cpu integratorap;
-echo "Variant:: $variant with core $cpu"
-
diff --git a/board/integratorap/u-boot.lds.template b/board/integratorap/u-boot.lds.template
deleted file mode 100644
index 0ec8087..0000000
--- a/board/integratorap/u-boot.lds.template
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-# Template used during configuration to emsure the core module processor code,
-# from CPU_FILE, is placed at the start of the image */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-	. = ALIGN(4);
-	.text	:
-	{
-		CPU_FILE (.text)
-		*(.text)
-	}
-	.rodata : { *(.rodata) }
-	. = ALIGN(4);
-	.data : { *(.data) }
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}