rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 42 insertions, 42 deletions

diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 7f17ba6..8c95341 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -72,7 +72,7 @@
 #define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
 #endif
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /**
  * flash_init: - initialize data structures for flash chips
@@ -85,14 +85,14 @@ ulong flash_init(void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT & FLASH_VENDMASK) |
 			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 		switch (i) {
 			case 0:
@@ -110,8 +110,8 @@ ulong flash_init(void)
 
 	/* Protect u-boot sectors */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + (256*1024) - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
 			&flash_info[0]);
 
 #ifdef CONFIG_ENV_IS_IN_FLASH
@@ -135,7 +135,7 @@ void flash_print_info  (flash_info_t *info)
 {
 	int i, j;
 
-	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
 
 		switch (info->flash_id & FLASH_VENDMASK) {
 
@@ -235,7 +235,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 			while ((*addr & 0x0080) != 0x0080) {
 				PRINTK(".");
-				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0x00B0; /* suspend erase*/
 					*addr = 0x00FF; /* read mode    */
 					rc = ERR_TIMOUT;
@@ -306,7 +306,7 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
 
 	/* wait while polling the status register */
 	while(((val = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			*addr = 0xB0; /* suspend program command */
 			goto outahere;
diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S
index 4c9f10f..9892430 100644
--- a/board/innokom/lowlevel_init.S
+++ b/board/innokom/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -54,71 +54,71 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 /*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
 /*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
 /*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
 /* */
@@ -168,17 +168,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -187,37 +187,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -239,7 +239,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr	r3,	=CFG_MDREFR_VAL
+	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
 	ldr	r2,	=0xFFF
 	and	r3,	r3, r2
 	ldr	r4,	=0x03ca4000
@@ -269,7 +269,7 @@ mem_init:
 	/* Step 4a: assert MDREFR:K?RUN and configure                       */
 	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
 
-	ldr	r4,	=CFG_MDREFR_VAL
+	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
 	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
 	ldr	r4,	[r1, #MDREFR_OFFSET]
 
@@ -292,7 +292,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -325,7 +325,7 @@ mem_init:
 	/*          Jan 2003, Errata #116, page 30.                         */
 
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2, [r3]
 	str	r2, [r3]
 	str	r2, [r3]
@@ -345,7 +345,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]