* Patch by Arun Dharankar, 4 Apr 2003:

  Add IDMA example code (tested on 8260 only)

* Add support for Purple Board (MIPS64 5Kc)

* Add support for MIPS64 5Kc CPUs

* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS

* Patch by Denis Peter, 04 Apr 2003:
  - update MIP405-4 board

* Patches by Denis Peter, 03 April 2003:
  - fix PCI IRQs on MPL boards
  - fix two more un-relocated pointer problems

* Fix behaviour of "run" command:
  - print error message iv variable does not exist
  - terminate processing of arguments in case of error

* Patches by Peter Figuli, 10 Mar 2003
  - Add support for BTUART on PXA platform
  - Add support for WEP EP250 (PXA) board

* Fix flash problems on INCA-IP; add tool to allow bruning images  to
  flash using a BDI2000

* Implement fix for I2C Edge Conditions problem for all boards that
  use the bit-banging driver (common/soft_i2c.c)

* Add patches by Robert Schwebel, 31 Mar 2003:
  - csb226 board: bring in sync with innokom/memsetup.S
  - csb226 board: fix MDREFR handling
  - misc doc fixes / extensions
  - innokom board: cleanup, MDREFR fix in memsetup.S, config update
  - add BOOT_PROGRESS to armlinux.c

3 files changed, 15 insertions, 22 deletions

diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 32c57d8..b7c2072 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -10,7 +10,8 @@
  * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
  *
  * (C) Copyright 2002
- * Kai-Uwe Bloem, GDS, <kai-uwe.bloem@auerswald.de>
+ * Auerswald GmbH & Co KG, Germany 
+ * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 5ee5117..da238da 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -48,7 +48,7 @@ int i2c_init_board(void)
 	icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
 	
 	/* set gpio pin low _before_ we change direction to output          */
-		GPCR(70) = GPIO_bit(70);
+	GPCR(70) = GPIO_bit(70);
 	
 	/* now toggle between output=low and high-impedance                 */
 	for (i = 0; i < 20; i++) {
@@ -100,13 +100,8 @@ int board_init (void)
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
-	/* arch number of Innokom board */
 	gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
-
-	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* baud rate */
 	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
 
 	return 0;
diff --git a/board/innokom/memsetup.S b/board/innokom/memsetup.S
index a2bc99d..60f9d50 100644
--- a/board/innokom/memsetup.S
+++ b/board/innokom/memsetup.S
@@ -237,17 +237,16 @@ mem_init:
         /* ---------------------------------------------------------------- */
 
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
-	/* this to power on defaults + DIR field.                           */
+	/* this to power on defaults + DRI field.                           */
 
-	ldr	r4,	=0x03ca4fff
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-        ldr     r4,	[r1, #MDREFR_OFFSET]
+	ldr 	r3, 	=CFG_MDREFR_VAL
+	ldr	r2,	=0xFFF
+	and	r3,	r3, r2
+	ldr	r4,	=0x03ca4000
+	orr	r4,	r4,  r3
 
-	ldr	r4,	=0x03ca4030
 	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr	r4,	[r1, #MDREFR_OFFSET]
-
-        /* Note: preserve the mdrefr value in r4                            */
+        ldr     r4,	[r1, #MDREFR_OFFSET]
 
 
 	/* ---------------------------------------------------------------- */
@@ -267,18 +266,16 @@ mem_init:
         /* Step 4: Initialize SDRAM                                         */
         /* ---------------------------------------------------------------- */
 
-	/* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure      */
+	/* Step 4a: assert MDREFR:K?RUN and configure                       */
 	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
 
-	orr	r4,	r4,	#(MDREFR_K1RUN|MDREFR_K0RUN)
-
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
+	ldr	r4,	=CFG_MDREFR_VAL
+	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+	ldr	r4,	[r1, #MDREFR_OFFSET]
 
 	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
 
-	bic	r4,	r4,	#(MDREFR_SLFRSH)
+	bic	r4,	r4, #(MDREFR_SLFRSH)
 
         str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
         ldr     r4,     [r1, #MDREFR_OFFSET]