summaryrefslogtreecommitdiff
path: root/board/incaip
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-12-27 19:24:54 +0000
committerwdenk <wdenk>2003-12-27 19:24:54 +0000
commit7cb22f97ee41f344cf6542c077abf124c38ec5c6 (patch)
treef8370b91be3a7e71d304c05c64d6ec15a8867517 /board/incaip
parentb2001f273fcb34d0f2ca43a9b01a24e5c50da6cd (diff)
downloadu-boot-imx-7cb22f97ee41f344cf6542c077abf124c38ec5c6.zip
u-boot-imx-7cb22f97ee41f344cf6542c077abf124c38ec5c6.tar.gz
u-boot-imx-7cb22f97ee41f344cf6542c077abf124c38ec5c6.tar.bz2
* Make CPU clock on ICA-IP board controllable by a "cpuclk"
environment variable which can set to "100", "133", or "150". The CPU clock will be configured accordingly upon next reboot. Other values are ignored. In case of an invalid or undefined "cpuclk" value, the compile-time default CPU clock speed will be used. * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory window that is used to access the UART registers by the Linux driver) * Patch by Reinhard Meyer, 20 Dec 2003: Fix clock calculation for the MPC5200 for higher clock frequencies (above 2**32 / 10 = 429.5 MHz).
Diffstat (limited to 'board/incaip')
-rw-r--r--board/incaip/memsetup.S183
1 files changed, 132 insertions, 51 deletions
diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
index 245ab72..70d2885 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/memsetup.S
@@ -55,63 +55,142 @@
#define CGU_MUXCR(value) 0x0014(value)
#define CGU_PLL1SR(value) 0x000C(value)
- .globl memsetup
-memsetup:
+ .set noreorder
- /* EBU Initialization for the Flash CS0 and CS2.
- */
- li t0, EBU_MODUL_BASE
- li t1, 0xA0000041
- sw t1, EBU_ADDSEL0(t0)
+/*
+ * void ebu_init(long)
+ *
+ * a0 has the clock value we are going to run at
+ */
+ .globl ebu_init
+ .ent ebu_init
+ebu_init:
+
+ li t1, EBU_MODUL_BASE
+ li t2, 0xA0000041
+ sw t2, EBU_ADDSEL0(t1)
+ li t2, 0xA0800041
+ sw t2, EBU_ADDSEL2(t1)
+ li t2, 0xBE0000F1
+ sw t2, EBU_ADDSEL1(t1)
+
+ li t3, 100000000
+ beq a0, t3, 1f
+ nop
+ li t3, 133000000
+ beq a0, t3, 2f
+ nop
+ li t3, 150000000
+ beq a0, t3, 2f
+ nop
+ b 3f
+ nop
-#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
- lw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
- sw t1, EBU_BUSCON2(t0)
-#else /* 150 MHz or 133 MHz */
- li t1, 0x8841417E
- sw t1, EBU_BUSCON0(t0)
- sw t1, EBU_BUSCON2(t0)
-#endif
+ /* 100 MHz */
+1:
+ li t2, 0x8841417D
+ sw t2, EBU_BUSCON0(t1)
+ sw t2, EBU_BUSCON2(t1)
+ li t2, 0x684142BD
+ b 3f
+ sw t2, EBU_BUSCON1(t1) /* delay slot */
+
+ /* 133 or 150 MHz */
+2:
+ li t2, 0x8841417E
+ sw t2, EBU_BUSCON0(t1)
+ sw t2, EBU_BUSCON2(t1)
+ li t2, 0x684143FD
+ sw t2, EBU_BUSCON1(t1)
+3:
+ j ra
+ nop
+
+ .end ebu_init
- li t1, 0xA0800041
- sw t1, EBU_ADDSEL2(t0)
- /* Need to initialize CS1 too, so as to to prevent overlapping with
- * Flash bank 1.
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+ .globl cgu_init
+ .ent cgu_init
+cgu_init:
+
+ li t1, CGU_MODUL_BASE
+
+ li t3, 100000000
+ beq a0, t3, 1f
+ nop
+ li t3, 133000000
+ beq a0, t3, 2f
+ nop
+ li t3, 150000000
+ beq a0, t3, 3f
+ nop
+ b 5f
+ nop
+
+ /* 100 MHz clock */
+1:
+ li t2, 0x80000014
+ sw t2, CGU_DIVCR(t1)
+ li t2, 0x80000000
+ sw t2, CGU_MUXCR(t1)
+ li t2, 0x800B0001
+ b 5f
+ sw t2, CGU_PLL1CR(t1) /* delay slot */
+
+ /* 133 MHz clock */
+2:
+ li t2, 0x80000054
+ sw t2, CGU_DIVCR(t1)
+ li t2, 0x80000000
+ sw t2, CGU_MUXCR(t1)
+ li t2, 0x800B0001
+ b 5f
+ sw t2, CGU_PLL1CR(t1) /* delay slot */
+
+ /* 150 MHz clock */
+3:
+ li t2, 0x80000017
+ sw t2, CGU_DIVCR(t1)
+ li t2, 0xC00B0001
+ sw t2, CGU_PLL1CR(t1)
+ li t3, 0x80000000
+4:
+ lw t2, CGU_PLL1SR(t1)
+ and t2, t2, t3
+ beq t2, zero, 4b
+ nop
+ li t2, 0x80000001
+ sw t2, CGU_MUXCR(t1)
+5:
+ j ra
+ nop
+
+ .end cgu_init
+
+
+ .globl memsetup
+ .ent memsetup
+memsetup:
+
+ /* EBU and CGU Initialization.
*/
- li t1, 0xBE0000F1
- sw t1, EBU_ADDSEL1(t0)
-
-#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
- li t1, 0x684142BD
-#else /* 150 MHz or 133 MHz */
- li t1, 0x684143FD
-#endif
- sw t1, EBU_BUSCON1(t0)
-
-#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
- li t0, CGU_MODUL_BASE
- li t1, 0x80000017
- sw t1, CGU_DIVCR(t0)
- li t1, 0xC00B0001
- sw t1, CGU_PLL1CR(t0)
- lui t2, 0x8000
-b1:
- lw t1, CGU_PLL1SR(t0)
- and t1, t1, t2
- beq t1, zero, b1
- li t1, 0x80000001
- sw t1, CGU_MUXCR(t0)
-#elif CPU_CLOCK_RATE==133000000 /* 133 MHz clock for the MIPS core */
- li t0, CGU_MODUL_BASE
- li t1, 0x80000054
- sw t1, CGU_DIVCR(t0)
- li t1, 0x80000000
- sw t1, CGU_MUXCR(t0)
- li t1, 0x800B0001
- sw t1, CGU_PLL1CR(t0)
-#endif
+ li a0, CPU_CLOCK_RATE
+ move t0, ra
+
+ /* We rely on the fact that neither ebu_init() nor cgu_init()
+ * modify t0 and a0.
+ */
+ bal ebu_init
+ nop
+ bal cgu_init
+ nop
+ move ra, t0
/* SDRAM Initialization.
*/
@@ -154,3 +233,5 @@ b1:
j ra
nop
+ .end memsetup
+