* Make CPU clock on ICA-IP board controllable by a "cpuclk"

  environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).

1 files changed, 132 insertions, 51 deletions

diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
index 245ab72..70d2885 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/memsetup.S
@@ -55,63 +55,142 @@
 #define CGU_MUXCR(value)        0x0014(value)
 #define CGU_PLL1SR(value)       0x000C(value)
 
-	.globl	memsetup
-memsetup:
+	.set	noreorder		
 
-	/* EBU Initialization for the Flash CS0 and CS2.
-	 */
-	li	t0, EBU_MODUL_BASE
 
-	li	t1, 0xA0000041
-	sw	t1, EBU_ADDSEL0(t0)
+/*
+ * void ebu_init(long)
+ *
+ * a0 has the clock value we are going to run at
+ */
+	.globl	ebu_init
+	.ent	ebu_init
+ebu_init:
+
+	li	t1, EBU_MODUL_BASE
+	li	t2, 0xA0000041
+	sw	t2, EBU_ADDSEL0(t1)
+	li	t2, 0xA0800041
+	sw	t2, EBU_ADDSEL2(t1)
+	li	t2, 0xBE0000F1
+	sw	t2, EBU_ADDSEL1(t1)
+
+	li	t3, 100000000
+	beq	a0, t3, 1f
+	nop
+	li	t3, 133000000
+	beq	a0, t3, 2f
+	nop
+	li	t3, 150000000
+	beq	a0, t3, 2f
+	nop
+	b	3f
+	nop
 
-#if CPU_CLOCK_RATE==100000000	/* 100 MHz clock for the MIPS core */
-	lw	t1, EBU_BUSCON0(t0)  /* value set up by magic flash word */
-	sw	t1, EBU_BUSCON2(t0)
-#else /* 150 MHz or 133 MHz */
-	li	t1, 0x8841417E
-	sw	t1, EBU_BUSCON0(t0)
-	sw	t1, EBU_BUSCON2(t0)
-#endif
+	/* 100 MHz */
+1:
+	li	t2, 0x8841417D
+	sw	t2, EBU_BUSCON0(t1)
+	sw	t2, EBU_BUSCON2(t1)
+	li	t2, 0x684142BD
+	b	3f
+	sw	t2, EBU_BUSCON1(t1)	/* delay slot */
+
+	/* 133 or 150 MHz */
+2:
+	li	t2, 0x8841417E
+	sw	t2, EBU_BUSCON0(t1)
+	sw	t2, EBU_BUSCON2(t1)
+	li	t2, 0x684143FD
+	sw	t2, EBU_BUSCON1(t1)
+3:
+	j	ra
+	nop
+
+	.end	ebu_init
 
-	li	t1, 0xA0800041
-	sw	t1, EBU_ADDSEL2(t0)
 
-	/* Need to initialize CS1 too, so as to to prevent overlapping with
-	 * Flash bank 1.
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	cgu_init
+	.ent	cgu_init
+cgu_init:
+
+	li	t1, CGU_MODUL_BASE
+
+	li	t3, 100000000
+	beq	a0, t3, 1f
+	nop
+	li	t3, 133000000
+	beq	a0, t3, 2f
+	nop
+	li	t3, 150000000
+	beq	a0, t3, 3f
+	nop
+	b	5f
+	nop
+
+	/* 100 MHz clock */
+1:
+	li	t2, 0x80000014
+	sw	t2, CGU_DIVCR(t1)
+	li	t2, 0x80000000
+	sw	t2, CGU_MUXCR(t1)
+	li	t2, 0x800B0001
+	b	5f
+	sw	t2, CGU_PLL1CR(t1)	/* delay slot */
+
+	/* 133 MHz clock */
+2:
+	li	t2, 0x80000054
+	sw	t2, CGU_DIVCR(t1)
+	li	t2, 0x80000000
+	sw	t2, CGU_MUXCR(t1)
+	li	t2, 0x800B0001
+	b	5f
+	sw	t2, CGU_PLL1CR(t1)	/* delay slot */
+
+	/* 150 MHz clock */
+3:
+	li	t2, 0x80000017
+	sw	t2, CGU_DIVCR(t1)
+	li	t2, 0xC00B0001
+	sw	t2, CGU_PLL1CR(t1)
+	li	t3, 0x80000000
+4:
+	lw	t2, CGU_PLL1SR(t1)
+	and	t2, t2, t3
+	beq	t2, zero, 4b
+	nop
+	li	t2, 0x80000001
+	sw	t2, CGU_MUXCR(t1)
+5:
+	j	ra
+	nop
+
+	.end	cgu_init
+
+
+	.globl	memsetup
+	.ent	memsetup
+memsetup:
+
+	/* EBU and CGU Initialization.
 	 */
-	li	t1, 0xBE0000F1
- 	sw	t1, EBU_ADDSEL1(t0)
-
-#if CPU_CLOCK_RATE==100000000   /* 100 MHz clock for the MIPS core */
-	li	t1, 0x684142BD
-#else /* 150 MHz or 133 MHz */
-	li	t1, 0x684143FD
-#endif
- 	sw	t1, EBU_BUSCON1(t0)
-
-#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
-	li      t0, CGU_MODUL_BASE
-	li      t1, 0x80000017
-	sw      t1, CGU_DIVCR(t0)
-	li      t1, 0xC00B0001
-	sw      t1, CGU_PLL1CR(t0)
-	lui     t2, 0x8000
-b1:
-	lw      t1, CGU_PLL1SR(t0)
-	and     t1, t1, t2
-	beq     t1, zero, b1
-	li      t1, 0x80000001
-	sw      t1, CGU_MUXCR(t0)
-#elif CPU_CLOCK_RATE==133000000	/* 133 MHz clock for the MIPS core */
-	li	t0, CGU_MODUL_BASE
-	li	t1, 0x80000054
-	sw	t1, CGU_DIVCR(t0)
-	li	t1, 0x80000000
-	sw	t1, CGU_MUXCR(t0)
-	li	t1, 0x800B0001
-	sw	t1, CGU_PLL1CR(t0)
-#endif
+	li	a0, CPU_CLOCK_RATE
+	move	t0, ra
+
+	/* We rely on the fact that neither ebu_init() nor cgu_init()
+	 * modify t0 and a0.
+	 */
+	bal	ebu_init
+	nop
+	bal	cgu_init
+	nop
+	move	ra, t0
 
 	/* SDRAM Initialization.
 	 */
@@ -154,3 +233,5 @@ b1:
 
 	j	ra
 	nop
+	.end	memsetup
+