Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/armv7/rmobile/Makefile
	doc/README.scrapyard

Needed manual fix:
	arch/arm/cpu/armv7/omap-common/Makefile
	board/compulab/cm_t335/u-boot.lds

6 files changed, 586 insertions, 0 deletions

diff --git a/board/imgtec/malta/Makefile b/board/imgtec/malta/Makefile
new file mode 100644
index 0000000..19dd3a3
--- /dev/null
+++ b/board/imgtec/malta/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	= malta.o
+obj-y	+= lowlevel_init.o
+obj-y	+= superio.o
diff --git a/board/imgtec/malta/flash-malta-boot.tcl b/board/imgtec/malta/flash-malta-boot.tcl
new file mode 100644
index 0000000..0eedf07
--- /dev/null
+++ b/board/imgtec/malta/flash-malta-boot.tcl
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2013 Imagination Technologies
+#
+# Programs a MIPS Malta boot flash with a flat binary image.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+proc flash-boot { binfile } {
+  puts "flash monitor binary $binfile"
+  config Coherent on
+  config CoherencyDuringLoad on
+
+  if {[endian]=="big"} {
+    puts "CPU in BE mode"
+    flash device sharp_16x32_be;
+  } else {
+    puts "CPU in LE mode"
+    flash device sharp_16x32;
+  }
+
+  flash clear all;
+  flash set 0xBE000000..0xBE0FFFFF
+  flash erase sector 0xbe000000;
+  flash erase sector 0xbe020000;
+  flash erase sector 0xbe040000;
+  flash erase sector 0xbe060000;
+  flash erase sector 0xbe080000;
+  flash erase sector 0xbe0a0000;
+  flash erase sector 0xbe0c0000;
+  flash erase sector 0xbe0e0000;
+  puts "finished erasing boot flash";
+
+  puts "programming flash, please be patient"
+  load bin 0xbe000000 $binfile size4
+
+  flash clear all
+  config CoherencyDuringLoad off
+  puts "finished programming boot flash";
+}
diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S
new file mode 100644
index 0000000..ae09c27
--- /dev/null
+++ b/board/imgtec/malta/lowlevel_init.S
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <config.h>
+#include <gt64120.h>
+#include <msc01.h>
+#include <pci.h>
+
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/malta.h>
+#include <asm/mipsregs.h>
+
+#ifdef CONFIG_SYS_BIG_ENDIAN
+#define CPU_TO_GT32(_x)		((_x))
+#else
+#define CPU_TO_GT32(_x) (					\
+	(((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) |	\
+	(((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
+#endif
+
+	.text
+	.set noreorder
+	.set mips32
+
+	.globl	lowlevel_init
+lowlevel_init:
+	/* disable any L2 cache for now */
+	sync
+	mfc0	t0, CP0_CONFIG, 2
+	ori	t0, t0, 0x1 << 12
+	mtc0	t0, CP0_CONFIG, 2
+
+	/* detect the core card */
+	li	t0, KSEG1ADDR(MALTA_REVISION)
+	lw	t0, 0(t0)
+	srl	t0, t0, MALTA_REVISION_CORID_SHF
+	andi	t0, t0, (MALTA_REVISION_CORID_MSK >> \
+			 MALTA_REVISION_CORID_SHF)
+
+	/* core cards using the gt64120 system controller */
+	li	t1, MALTA_REVISION_CORID_CORE_LV
+	beq	t0, t1, _gt64120
+
+	/* core cards using the MSC01 system controller */
+	 li	t1, MALTA_REVISION_CORID_CORE_FPGA6
+	beq	t0, t1, _msc01
+	 nop
+
+	/* unknown system controller */
+	b	.
+	 nop
+
+	/*
+	 * Load BAR registers of GT64120 as done by YAMON
+	 *
+	 * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
+	 * to the barebox mailing list.
+	 * The subject of the original patch:
+	 *   'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
+	 * URL:
+	 * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
+	 *
+	 * based on write_bootloader() in qemu.git/hw/mips_malta.c
+	 * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
+	 */
+_gt64120:
+	/* move GT64120 registers from 0x14000000 to 0x1be00000 */
+	li	t1, KSEG1ADDR(GT_DEF_BASE)
+	li	t0, CPU_TO_GT32(0xdf000000)
+	sw	t0, GT_ISD_OFS(t1)
+
+	/* setup MEM-to-PCI0 mapping */
+	li	t1, KSEG1ADDR(MALTA_GT_BASE)
+
+	/* setup PCI0 io window to 0x18000000-0x181fffff */
+	li	t0, CPU_TO_GT32(0xc0000000)
+	sw	t0, GT_PCI0IOLD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x40000000)
+	sw	t0, GT_PCI0IOHD_OFS(t1)
+
+	/* setup PCI0 mem windows */
+	li	t0, CPU_TO_GT32(0x80000000)
+	sw	t0, GT_PCI0M0LD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x3f000000)
+	sw	t0, GT_PCI0M0HD_OFS(t1)
+
+	li	t0, CPU_TO_GT32(0xc1000000)
+	sw	t0, GT_PCI0M1LD_OFS(t1)
+	li	t0, CPU_TO_GT32(0x5e000000)
+	sw	t0, GT_PCI0M1HD_OFS(t1)
+
+	jr	ra
+	 nop
+
+	/*
+	 *
+	 */
+_msc01:
+	/* setup peripheral bus controller clock divide */
+	li	t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE)
+	li	t1, 0x1 << MSC01_PBC_CLKCFG_SHF
+	sw	t1, MSC01_PBC_CLKCFG_OFS(t0)
+
+	/* tweak peripheral bus controller timings */
+	li	t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \
+		    (0x1 << MSC01_PBC_CS0TIM_CAT_SHF)
+	sw	t1, MSC01_PBC_CS0TIM_OFS(t0)
+	li	t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \
+		    (0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \
+		    (0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \
+		    (0x2 << MSC01_PBC_CS0RW_WAT_SHF)
+	sw	t1, MSC01_PBC_CS0RW_OFS(t0)
+	lw	t1, MSC01_PBC_CS0CFG_OFS(t0)
+	li	t2, MSC01_PBC_CS0CFG_DTYP_MSK
+	and	t1, t2
+	ori	t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \
+		    (0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \
+		    (0x10 << MSC01_PBC_CS0CFG_WS_SHF)
+	sw	t1, MSC01_PBC_CS0CFG_OFS(t0)
+
+	/* setup basic address decode */
+	li	t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE)
+	li	t1, 0x0
+	li	t2, -CONFIG_SYS_MEM_SIZE
+	sw	t1, MSC01_BIU_MCBAS1L_OFS(t0)
+	sw	t2, MSC01_BIU_MCMSK1L_OFS(t0)
+	sw	t1, MSC01_BIU_MCBAS2L_OFS(t0)
+	sw	t2, MSC01_BIU_MCMSK2L_OFS(t0)
+
+	/* initialise IP1 - unused */
+	li	t1, MALTA_MSC01_IP1_BASE
+	li	t2, -MALTA_MSC01_IP1_SIZE
+	sw	t1, MSC01_BIU_IP1BAS1L_OFS(t0)
+	sw	t2, MSC01_BIU_IP1MSK1L_OFS(t0)
+	sw	t1, MSC01_BIU_IP1BAS2L_OFS(t0)
+	sw	t2, MSC01_BIU_IP1MSK2L_OFS(t0)
+
+	/* initialise IP2 - PCI */
+	li	t1, MALTA_MSC01_IP2_BASE1
+	li	t2, -MALTA_MSC01_IP2_SIZE1
+	sw	t1, MSC01_BIU_IP2BAS1L_OFS(t0)
+	sw	t2, MSC01_BIU_IP2MSK1L_OFS(t0)
+	li	t1, MALTA_MSC01_IP2_BASE2
+	li	t2, -MALTA_MSC01_IP2_SIZE2
+	sw	t1, MSC01_BIU_IP2BAS2L_OFS(t0)
+	sw	t2, MSC01_BIU_IP2MSK2L_OFS(t0)
+
+	/* initialise IP3 - peripheral bus controller */
+	li	t1, MALTA_MSC01_IP3_BASE
+	li	t2, -MALTA_MSC01_IP3_SIZE
+	sw	t1, MSC01_BIU_IP3BAS1L_OFS(t0)
+	sw	t2, MSC01_BIU_IP3MSK1L_OFS(t0)
+	sw	t1, MSC01_BIU_IP3BAS2L_OFS(t0)
+	sw	t2, MSC01_BIU_IP3MSK2L_OFS(t0)
+
+	/* setup PCI memory */
+	li	t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE)
+	li	t1, MALTA_MSC01_PCIMEM_BASE
+	li	t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK
+	li	t3, MALTA_MSC01_PCIMEM_MAP
+	sw	t1, MSC01_PCI_SC2PMBASL_OFS(t0)
+	sw	t2, MSC01_PCI_SC2PMMSKL_OFS(t0)
+	sw	t3, MSC01_PCI_SC2PMMAPL_OFS(t0)
+
+	/* setup PCI I/O */
+	li	t1, MALTA_MSC01_PCIIO_BASE
+	li	t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK
+	li	t3, MALTA_MSC01_PCIIO_MAP
+	sw	t1, MSC01_PCI_SC2PIOBASL_OFS(t0)
+	sw	t2, MSC01_PCI_SC2PIOMSKL_OFS(t0)
+	sw	t3, MSC01_PCI_SC2PIOMAPL_OFS(t0)
+
+	/* setup PCI_BAR0 memory window */
+	li	t1, -CONFIG_SYS_MEM_SIZE
+	sw	t1, MSC01_PCI_BAR0_OFS(t0)
+
+	/* setup PCI to SysCon/CPU translation */
+	sw	t1, MSC01_PCI_P2SCMSKL_OFS(t0)
+	sw	zero, MSC01_PCI_P2SCMAPL_OFS(t0)
+
+	/* setup PCI vendor & device IDs */
+	li	t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \
+		    (PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF)
+	sw	t1, MSC01_PCI_HEAD0_OFS(t0)
+
+	/* setup PCI subsystem vendor & device IDs */
+	sw	t1, MSC01_PCI_HEAD11_OFS(t0)
+
+	/* setup PCI class, revision */
+	li	t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \
+		    (0x1 << MSC01_PCI_HEAD2_REV_SHF)
+	sw	t1, MSC01_PCI_HEAD2_OFS(t0)
+
+	/* ensure a sane setup */
+	sw	zero, MSC01_PCI_HEAD3_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD4_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD5_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD6_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD7_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD8_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD9_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD10_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD12_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD13_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD14_OFS(t0)
+	sw	zero, MSC01_PCI_HEAD15_OFS(t0)
+
+	/* setup PCI command register */
+	li	t1, (PCI_COMMAND_FAST_BACK | \
+		     PCI_COMMAND_SERR | \
+		     PCI_COMMAND_PARITY | \
+		     PCI_COMMAND_MASTER | \
+		     PCI_COMMAND_MEMORY)
+	sw	t1, MSC01_PCI_HEAD1_OFS(t0)
+
+	/* setup PCI byte swapping */
+#ifdef CONFIG_SYS_BIG_ENDIAN
+	li	t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \
+		    (0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF)
+	sw	t1, MSC01_PCI_SWAP_OFS(t0)
+#else
+	sw	zero, MSC01_PCI_SWAP_OFS(t0)
+#endif
+
+	/* enable PCI host configuration cycles */
+	lw	t1, MSC01_PCI_CFG_OFS(t0)
+	li	t2, MSC01_PCI_CFG_RA_MSK | \
+		    MSC01_PCI_CFG_G_MSK | \
+		    MSC01_PCI_CFG_EN_MSK
+	or	t1, t1, t2
+	sw	t1, MSC01_PCI_CFG_OFS(t0)
+
+	jr	ra
+	 nop
diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
new file mode 100644
index 0000000..d363e49
--- /dev/null
+++ b/board/imgtec/malta/malta.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 Imagination Technologies
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <pci.h>
+#include <pci_gt64120.h>
+#include <pci_msc01.h>
+#include <rtc.h>
+#include <serial.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/malta.h>
+
+#include "superio.h"
+
+enum core_card {
+	CORE_UNKNOWN,
+	CORE_LV,
+	CORE_FPGA6,
+};
+
+enum sys_con {
+	SYSCON_UNKNOWN,
+	SYSCON_GT64120,
+	SYSCON_MSC01,
+};
+
+static void malta_lcd_puts(const char *str)
+{
+	int i;
+	void *reg = (void *)CKSEG1ADDR(MALTA_ASCIIPOS0);
+
+	/* print up to 8 characters of the string */
+	for (i = 0; i < min(strlen(str), 8); i++) {
+		__raw_writel(str[i], reg);
+		reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
+	}
+
+	/* fill the rest of the display with spaces */
+	for (; i < 8; i++) {
+		__raw_writel(' ', reg);
+		reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
+	}
+}
+
+static enum core_card malta_core_card(void)
+{
+	u32 corid, rev;
+
+	rev = __raw_readl(CKSEG1ADDR(MALTA_REVISION));
+	corid = (rev & MALTA_REVISION_CORID_MSK) >> MALTA_REVISION_CORID_SHF;
+
+	switch (corid) {
+	case MALTA_REVISION_CORID_CORE_LV:
+		return CORE_LV;
+
+	case MALTA_REVISION_CORID_CORE_FPGA6:
+		return CORE_FPGA6;
+
+	default:
+		return CORE_UNKNOWN;
+	}
+}
+
+static enum sys_con malta_sys_con(void)
+{
+	switch (malta_core_card()) {
+	case CORE_LV:
+		return SYSCON_GT64120;
+
+	case CORE_FPGA6:
+		return SYSCON_MSC01;
+
+	default:
+		return SYSCON_UNKNOWN;
+	}
+}
+
+phys_size_t initdram(int board_type)
+{
+	return CONFIG_SYS_MEM_SIZE;
+}
+
+int checkboard(void)
+{
+	enum core_card core;
+
+	malta_lcd_puts("U-boot");
+	puts("Board: MIPS Malta");
+
+	core = malta_core_card();
+	switch (core) {
+	case CORE_LV:
+		puts(" CoreLV");
+		break;
+
+	case CORE_FPGA6:
+		puts(" CoreFPGA6");
+		break;
+
+	default:
+		puts(" CoreUnknown");
+	}
+
+	putc('\n');
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+void _machine_restart(void)
+{
+	void __iomem *reset_base;
+
+	reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
+	__raw_writel(GORESET, reset_base);
+}
+
+int board_early_init_f(void)
+{
+	void *io_base;
+
+	/* choose correct PCI I/O base */
+	switch (malta_sys_con()) {
+	case SYSCON_GT64120:
+		io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
+		break;
+
+	case SYSCON_MSC01:
+		io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
+		break;
+
+	default:
+		return -1;
+	}
+
+	/* setup FDC37M817 super I/O controller */
+	malta_superio_init(io_base);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	rtc_reset();
+
+	return 0;
+}
+
+struct serial_device *default_serial_console(void)
+{
+	switch (malta_sys_con()) {
+	case SYSCON_GT64120:
+		return &eserial1_device;
+
+	default:
+	case SYSCON_MSC01:
+		return &eserial2_device;
+	}
+}
+
+void pci_init_board(void)
+{
+	pci_dev_t bdf;
+	u32 val32;
+	u8 val8;
+
+	switch (malta_sys_con()) {
+	case SYSCON_GT64120:
+		set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE));
+
+		gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
+				 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
+				 0x10000000, 0x10000000, 128 * 1024 * 1024,
+				 0x00000000, 0x00000000, 0x20000);
+		break;
+
+	default:
+	case SYSCON_MSC01:
+		set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE));
+
+		msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE),
+			       0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
+			       MALTA_MSC01_PCIMEM_MAP,
+			       CKSEG1ADDR(MALTA_MSC01_PCIMEM_BASE),
+			       MALTA_MSC01_PCIMEM_SIZE, MALTA_MSC01_PCIIO_MAP,
+			       0x00000000, MALTA_MSC01_PCIIO_SIZE);
+		break;
+	}
+
+	bdf = pci_find_device(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82371AB_0, 0);
+	if (bdf == -1)
+		panic("Failed to find PIIX4 PCI bridge\n");
+
+	/* setup PCI interrupt routing */
+	pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCA, 10);
+	pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCB, 10);
+	pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCC, 11);
+	pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCD, 11);
+
+	/* mux SERIRQ onto SERIRQ pin */
+	pci_read_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, &val32);
+	val32 |= PCI_CFG_PIIX4_GENCFG_SERIRQ;
+	pci_write_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, val32);
+
+	/* enable SERIRQ - Linux currently depends upon this */
+	pci_read_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, &val8);
+	val8 |= PCI_CFG_PIIX4_SERIRQC_EN | PCI_CFG_PIIX4_SERIRQC_CONT;
+	pci_write_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, val8);
+}
diff --git a/board/imgtec/malta/superio.c b/board/imgtec/malta/superio.c
new file mode 100644
index 0000000..eaa14df
--- /dev/null
+++ b/board/imgtec/malta/superio.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * Setup code for the FDC37M817 super I/O controller
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define SIO_CONF_PORT		0x3f0
+#define SIO_DATA_PORT		0x3f1
+
+enum sio_conf_key {
+	SIOCONF_DEVNUM		= 0x07,
+	SIOCONF_ACTIVATE	= 0x30,
+	SIOCONF_ENTER_SETUP	= 0x55,
+	SIOCONF_BASE_HIGH	= 0x60,
+	SIOCONF_BASE_LOW	= 0x61,
+	SIOCONF_PRIMARY_INT	= 0x70,
+	SIOCONF_EXIT_SETUP	= 0xaa,
+	SIOCONF_MODE		= 0xf0,
+};
+
+static struct {
+	u8 key;
+	u8 data;
+} sio_config[] = {
+	/* tty0 */
+	{ SIOCONF_DEVNUM,	0x04 },
+	{ SIOCONF_BASE_HIGH,	0x03 },
+	{ SIOCONF_BASE_LOW,	0xf8 },
+	{ SIOCONF_MODE,		0x02 },
+	{ SIOCONF_PRIMARY_INT,	0x04 },
+	{ SIOCONF_ACTIVATE,	0x01 },
+
+	/* tty1 */
+	{ SIOCONF_DEVNUM,	0x05 },
+	{ SIOCONF_BASE_HIGH,	0x02 },
+	{ SIOCONF_BASE_LOW,	0xf8 },
+	{ SIOCONF_MODE,		0x02 },
+	{ SIOCONF_PRIMARY_INT,	0x03 },
+	{ SIOCONF_ACTIVATE,	0x01 },
+};
+
+void malta_superio_init(void *io_base)
+{
+	unsigned i;
+
+	/* enter config state */
+	writeb(SIOCONF_ENTER_SETUP, io_base + SIO_CONF_PORT);
+
+	/* configure peripherals */
+	for (i = 0; i < ARRAY_SIZE(sio_config); i++) {
+		writeb(sio_config[i].key, io_base + SIO_CONF_PORT);
+		writeb(sio_config[i].data, io_base + SIO_DATA_PORT);
+	}
+
+	/* exit config state */
+	writeb(SIOCONF_EXIT_SETUP, io_base + SIO_CONF_PORT);
+}
diff --git a/board/imgtec/malta/superio.h b/board/imgtec/malta/superio.h
new file mode 100644
index 0000000..1450da5
--- /dev/null
+++ b/board/imgtec/malta/superio.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * Setup code for the FDC37M817 super I/O controller
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __BOARD_MALTA_SUPERIO_H__
+#define __BOARD_MALTA_SUPERIO_H__
+
+extern void malta_superio_init(void *io_base);
+
+#endif /* __BOARD_MALTA_SUPERIO_H__ */