Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

3 files changed, 21 insertions, 21 deletions

diff --git a/board/idmr/flash.c b/board/idmr/flash.c
index 33512b8..57c9948 100644
--- a/board/idmr/flash.c
+++ b/board/idmr/flash.c
@@ -23,11 +23,11 @@
 
 #include <common.h>
 
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
 #define FLASH_BANK_SIZE 0x800000
 #define EN29LV640 0x227e227e
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 void flash_print_info (flash_info_t * info)
 {
@@ -75,15 +75,15 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(AMD_MANUFACT & FLASH_VENDMASK) |
 			(EN29LV640 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0x2ffff, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + 0x2ffff, &flash_info[0]);
 
 	return size;
 }
@@ -111,8 +111,8 @@ unsigned long flash_init (void)
 #define CMD_PROGRAM		0x00A0
 #define CMD_UNLOCK_BYPASS	0x0020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
 
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
@@ -191,7 +191,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+				if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -280,7 +280,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
index 4f073fc..3771c19 100644
--- a/board/idmr/idmr.c
+++ b/board/idmr/idmr.c
@@ -35,7 +35,7 @@ phys_size_t initdram (int board_type) {
 	/*
 	 * After reset, CS0 is configured to cover entire address space. We
 	 * need to configure it to its proper values, so that writes to
-	 * CFG_SDRAM_BASE and vicinity during SDRAM controller setup below do
+	 * CONFIG_SYS_SDRAM_BASE and vicinity during SDRAM controller setup below do
 	 * now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual).
 	 */
 
@@ -99,7 +99,7 @@ phys_size_t initdram (int board_type) {
 	 * PS: 16 bit
 	 */
 	mbar_writeLong(MCF_SDRAMC_DACR0,
-			MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) |
+			MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) |
 			MCF_SDRAMC_DACRn_BA(0x00) |
 			MCF_SDRAMC_DACRn_CASL(0x03) |
 			MCF_SDRAMC_DACRn_CBM(0x03) |
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type) {
 			MCF_SDRAMC_DACRn_IP);
 
 	/* Write to this block to initiate precharge */
-	*(volatile u16 *)(CFG_SDRAM_BASE) = 0xa5a5;
+	*(volatile u16 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5;
 
 	/*
 	 * Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We
@@ -153,9 +153,9 @@ phys_size_t initdram (int board_type) {
 	 * Burst Type = Sequential
 	 * Burst Length = 1
 	 */
-	*(volatile u32 *)(CFG_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
+	*(volatile u32 *)(CONFIG_SYS_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
index 78a7028..e79fa19 100644
--- a/board/idmr/mii.c
+++ b/board/idmr/mii.c
@@ -38,14 +38,14 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
 {
 	if (setclear) {
 		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
+		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
 	} else {
 	}
 
 	return 0;
 }
 
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
 #include <miiphy.h>
 
 /* Make MII read/write commands for the FEC. */
@@ -131,9 +131,9 @@ uint mii_send(uint mii_cmd)
 
 	return (mii_reply & 0xffff);	/* data read from phy */
 }
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
 
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
 int mii_discover_phy(struct eth_device *dev)
 {
 #define MAX_PHY_PASSES 11
@@ -198,7 +198,7 @@ int mii_discover_phy(struct eth_device *dev)
 
 	return phyaddr;
 }
-#endif				/* CFG_DISCOVER_PHY */
+#endif				/* CONFIG_SYS_DISCOVER_PHY */
 
 void mii_init(void) __attribute__((weak,alias("__mii_init")));