ARM : Add support for MINI2440 (s3c2440).

Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git

Currently, supporting only boot from NOR.

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>

3 files changed, 322 insertions, 0 deletions

diff --git a/board/friendlyarm/mini2440/Makefile b/board/friendlyarm/mini2440/Makefile
new file mode 100644
index 0000000..b88e569
--- /dev/null
+++ b/board/friendlyarm/mini2440/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2012
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= mini2440.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c
new file mode 100644
index 0000000..e97d981
--- /dev/null
+++ b/board/friendlyarm/mini2440/mini2440.c
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2009
+ * Michel Pollet <buserror@gmail.com>
+ *
+ * (C) Copyright 2012
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/s3c2440.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <netdev.h>
+#include "mini2440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline void pll_delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+int board_early_init_f(void)
+{
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+
+	/* to reduce PLL lock time, adjust the LOCKTIME register */
+	clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
+	clk_power->clkdivn = CLKDIVN_VAL;
+
+	/* configure UPLL */
+	clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+	/* some delay between MPLL and UPLL */
+	pll_delay(100);
+
+	/* configure MPLL */
+	clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	pll_delay(10000);
+
+	return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+	/* IOMUX Port H : UART Configuration */
+	gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
+		IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
+
+	gpio_direction_output(GPH8, 0);
+	gpio_direction_output(GPH9, 0);
+	gpio_direction_output(GPH10, 0);
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
+
+	/*
+	 * Configuring bus width and timing
+	 * Initialize clocks for each bank 0..5
+	 * Bank 3 and 4 are used for DM9000
+	 */
+	writel(BANK_CONF, &memctl->bwscon);
+	writel(B0_CONF, &memctl->bankcon[0]);
+	writel(B1_CONF, &memctl->bankcon[1]);
+	writel(B2_CONF, &memctl->bankcon[2]);
+	writel(B3_CONF, &memctl->bankcon[3]);
+	writel(B4_CONF, &memctl->bankcon[4]);
+	writel(B5_CONF, &memctl->bankcon[5]);
+
+	/* Bank 6 and 7 are used for DRAM */
+	writel(SDRAM_64MB, &memctl->bankcon[6]);
+	writel(SDRAM_64MB, &memctl->bankcon[7]);
+
+	writel(MEM_TIMING, &memctl->refresh);
+	writel(BANKSIZE_CONF, &memctl->banksize);
+	writel(B6_MRSR, &memctl->mrsrb6);
+	writel(B7_MRSR, &memctl->mrsrb7);
+
+	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+			PHYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_DRIVER_DM9000
+	return dm9000_initialize(bis);
+#else
+	return 0;
+#endif
+}
diff --git a/board/friendlyarm/mini2440/mini2440.h b/board/friendlyarm/mini2440/mini2440.h
new file mode 100644
index 0000000..db386ea
--- /dev/null
+++ b/board/friendlyarm/mini2440/mini2440.h
@@ -0,0 +1,144 @@
+#ifndef __MINI2440_BOARD_CONF_H__
+#define __MINI2440_BOARD_CONF_H__
+
+/* PLL Parameters */
+#define CLKDIVN_VAL	7
+#define M_MDIV		0x7f
+#define M_PDIV		0x2
+#define M_SDIV		0x1
+
+#define U_M_MDIV	0x38
+#define U_M_PDIV	0x2
+#define U_M_SDIV	0x2
+
+/* BWSCON */
+#define DW8				0x0
+#define DW16			0x1
+#define DW32			0x2
+#define WAIT			(0x1<<2)
+#define UBLB			(0x1<<3)
+
+#define B1_BWSCON		(DW32)
+#define B2_BWSCON		(DW16)
+#define B3_BWSCON		(DW16 + WAIT + UBLB)
+#define B4_BWSCON		(DW16 + WAIT + UBLB)
+#define B5_BWSCON		(DW16)
+#define B6_BWSCON		(DW32)
+#define B7_BWSCON		(DW32)
+
+/*
+ * Bank Configuration
+ */
+#define B0_Tacs			0x0	/*  0clk */
+#define B0_Tcos			0x0	/*  0clk */
+#define B0_Tacc			0x7	/* 14clk */
+#define B0_Tcoh			0x0	/*  0clk */
+#define B0_Tah			0x0	/*  0clk */
+#define B0_Tacp			0x0 /*  0clk */
+#define B0_PMC			0x0	/* normal */
+
+#define B1_Tacs			0x0
+#define B1_Tcos			0x0
+#define B1_Tacc			0x7
+#define B1_Tcoh			0x0
+#define B1_Tah			0x0
+#define B1_Tacp			0x0
+#define B1_PMC			0x0
+
+#define B2_Tacs			0x0
+#define B2_Tcos			0x0
+#define B2_Tacc			0x7
+#define B2_Tcoh			0x0
+#define B2_Tah			0x0
+#define B2_Tacp			0x0
+#define B2_PMC			0x0
+
+#define B3_Tacs			0x0
+#define B3_Tcos			0x3	/*  4clk */
+#define B3_Tacc			0x7
+#define B3_Tcoh			0x1	/*  1clk */
+#define B3_Tah			0x3	/*  4clk */
+#define B3_Tacp			0x0
+#define B3_PMC			0x0
+
+#define B4_Tacs			0x0
+#define B4_Tcos			0x3
+#define B4_Tacc			0x7
+#define B4_Tcoh			0x1
+#define B4_Tah			0x3
+#define B4_Tacp			0x0
+#define B4_PMC			0x0
+
+#define B5_Tacs			0x0
+#define B5_Tcos			0x0
+#define B5_Tacc			0x7
+#define B5_Tcoh			0x0
+#define B5_Tah			0x0
+#define B5_Tacp			0x0
+#define B5_PMC			0x0
+
+/*
+ * SDRAM Configuration
+ */
+#define SDRAM_MT		0x3	/* SDRAM */
+#define SDRAM_Trcd		0x0	/* 2clk */
+#define SDRAM_SCAN_9	0x1	/* 9bit */
+#define SDRAM_SCAN_10	0x2	/* 10bit */
+
+#define SDRAM_64MB	((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
+
+/*
+ * Refresh Parameter
+ */
+#define REFEN		0x1	/* Refresh enable */
+#define TREFMD		0x0	/* CBR(CAS before RAS)/Auto refresh */
+#define Trp			0x1	/* 3clk */
+#define Trc			0x3	/* 7clk */
+#define Tchr		0x0	/* unused */
+#define REFCNT	1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
+
+/*
+ * MRSR Parameter
+ */
+#define BL	0x0
+#define BT	0x0
+#define CL	0x3 /* 3 clocks */
+#define TM	0x0
+#define WBL	0x0
+
+/*
+ * BankSize Parameter
+ */
+#define BK76MAP	0x2 /* 128MB/128MB */
+#define SCLK_EN	0x1 /* SCLK active */
+#define SCKE_EN	0x1 /* SDRAM power down mode enable */
+#define BURST_EN	0x1 /* Burst enable */
+
+/*
+ * Register values
+ */
+#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
+			(B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
+			(B7_BWSCON<<28)))
+
+#define B0_CONF	((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
+		(B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
+#define B1_CONF	((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
+		(B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
+#define B2_CONF	((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
+		(B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
+#define B3_CONF	((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
+		(B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
+#define B4_CONF	((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
+		(B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
+#define B5_CONF	((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
+		(B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
+
+#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
+	(Trc<<18) + (Tchr<<16) + REFCNT
+
+#define BANKSIZE_CONF	(BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
+#define B6_MRSR			(CL<<4)
+#define B7_MRSR			(CL<<4)
+
+#endif