mini2440: remove board support

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 0 insertions, 118 deletions

diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c
deleted file mode 100644
index 59ed054..0000000
--- a/board/friendlyarm/mini2440/mini2440.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2009
- * Michel Pollet <buserror@gmail.com>
- *
- * (C) Copyright 2012
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/s3c2440.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <netdev.h>
-#include "mini2440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static inline void pll_delay(unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-	  "subs %0, %1, #1\n"
-	  "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-int board_early_init_f(void)
-{
-	struct s3c24x0_clock_power * const clk_power =
-					s3c24x0_get_base_clock_power();
-
-	/* to reduce PLL lock time, adjust the LOCKTIME register */
-	clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
-	clk_power->clkdivn = CLKDIVN_VAL;
-
-	/* configure UPLL */
-	clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-	/* some delay between MPLL and UPLL */
-	pll_delay(100);
-
-	/* configure MPLL */
-	clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
-	/* some delay between MPLL and UPLL */
-	pll_delay(10000);
-
-	return 0;
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
-	/* IOMUX Port H : UART Configuration */
-	gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
-		IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
-
-	gpio_direction_output(GPH8, 0);
-	gpio_direction_output(GPH9, 0);
-	gpio_direction_output(GPH10, 0);
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
-
-	/*
-	 * Configuring bus width and timing
-	 * Initialize clocks for each bank 0..5
-	 * Bank 3 and 4 are used for DM9000
-	 */
-	writel(BANK_CONF, &memctl->bwscon);
-	writel(B0_CONF, &memctl->bankcon[0]);
-	writel(B1_CONF, &memctl->bankcon[1]);
-	writel(B2_CONF, &memctl->bankcon[2]);
-	writel(B3_CONF, &memctl->bankcon[3]);
-	writel(B4_CONF, &memctl->bankcon[4]);
-	writel(B5_CONF, &memctl->bankcon[5]);
-
-	/* Bank 6 and 7 are used for DRAM */
-	writel(SDRAM_64MB, &memctl->bankcon[6]);
-	writel(SDRAM_64MB, &memctl->bankcon[7]);
-
-	writel(MEM_TIMING, &memctl->refresh);
-	writel(BANKSIZE_CONF, &memctl->banksize);
-	writel(B6_MRSR, &memctl->mrsrb6);
-	writel(B7_MRSR, &memctl->mrsrb7);
-
-	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
-			PHYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_DRIVER_DM9000
-	return dm9000_initialize(bis);
-#else
-	return 0;
-#endif
-}