powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641

The MPC8641 boards actually only have PCIE not PCI.  Rename so we are
uniform with regards to names so we can replace this code with templated
code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 38 insertions, 38 deletions

diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index bd357b8..8c8ce95 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -32,14 +32,14 @@
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
  * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0x8000_0000     0x9fff_ffff     PCIE1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCIE2 MEM                512M
  * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
  * 0x8000_0000     0x9fff_ffff     RapidIO                 512M
  * endif
  * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
- * 0xffc0_0000     0xffc0_ffff     PCI1 IO                 64K
- * 0xffc1_0000     0xffc1_ffff     PCI2 IO                 64K
+ * 0xffc0_0000     0xffc0_ffff     PCIE1 IO                 64K
+ * 0xffc1_0000     0xffc1_ffff     PCIE2 IO                 64K
  * 0xffe0_0000     0xffef_ffff     CCSRBAR                 1M
  * 0xffdf_0000     0xffe0_0000     PIXIS, CF               64K
  * 0xef80_0000     0xefff_ffff     FLASH (boot bank)       8M
@@ -54,10 +54,10 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
 #ifdef CONFIG_PCI
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
 #elif defined(CONFIG_RIO)
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 9e88102..a88be5a 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2007 Freescale Semiconductor.
+ * Copyright 2006, 2007, 2010 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -129,21 +129,21 @@ fixed_sdram(void)
 
 
 #if defined(CONFIG_PCI)
-static struct pci_controller pci1_hose;
+static struct pci_controller pcie1_hose;
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif	/* CONFIG_PCIE2 */
 
 int first_free_busno = 0;
 
 void pci_init_board(void)
 {
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
-	struct pci_controller *hose = &pci1_hose;
+	struct pci_controller *hose = &pcie1_hose;
 	struct pci_region *r = hose->regions;
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -169,16 +169,16 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BUS,
-			       CONFIG_SYS_PCI1_MEM_PHYS,
-			       CONFIG_SYS_PCI1_MEM_SIZE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BUS,
-			       CONFIG_SYS_PCI1_IO_PHYS,
-			       CONFIG_SYS_PCI1_IO_SIZE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
 		hose->region_count = r - hose->regions;
@@ -195,8 +195,8 @@ void pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
-				       + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
+		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+				       + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
 
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
@@ -204,26 +204,26 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
 
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
-	struct pci_controller *hose = &pci2_hose;
+	struct pci_controller *hose = &pcie2_hose;
 	struct pci_region *r = hose->regions;
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BUS,
-		       CONFIG_SYS_PCI2_MEM_PHYS,
-		       CONFIG_SYS_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCIE2_MEM_BUS,
+		       CONFIG_SYS_PCIE2_MEM_PHYS,
+		       CONFIG_SYS_PCIE2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BUS,
-		       CONFIG_SYS_PCI2_IO_PHYS,
-		       CONFIG_SYS_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCIE2_IO_BUS,
+		       CONFIG_SYS_PCIE2_IO_PHYS,
+		       CONFIG_SYS_PCIE2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = r - hose->regions;
@@ -238,7 +238,7 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
 
 }
 
@@ -253,11 +253,11 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
 #endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
 
 	/*