arm: ls102xa: Add SD boot support for LS1021AQDS board

This patch adds SD boot support for LS1021AQDS board. SPL
framework is used. PBL initialize the internal RAM and copy
SPL to it, then SPL initialize DDR using SPD and copy u-boot
from SD card to DDR, finally SPL transfer control to u-boot.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

5 files changed, 70 insertions, 1 deletions

diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index e30e944..962176b 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -6,3 +6,4 @@ F:	include/configs/ls1021aqds.h
 F:	configs/ls1021aqds_nor_defconfig
 F:	configs/ls1021aqds_ddr4_nor_defconfig
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+F:	configs/ls1021aqds_sdcard_defconfig
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index 5898e33..a539ff9 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -153,9 +153,12 @@ phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
 
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
 	puts("Initializing DDR....using SPD\n");
 	dram_size = fsl_ddr_sdram();
-
+#else
+	dram_size =  fsl_ddr_sdram_size();
+#endif
 	return dram_size;
 }
 
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index bf22fce..9eab42d 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -15,6 +15,7 @@
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_sec.h>
+#include <spl.h>
 
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
@@ -34,10 +35,17 @@ enum {
 int checkboard(void)
 {
 	char buf[64];
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
 	u8 sw;
+#endif
 
 	puts("Board: LS1021AQDS\n");
 
+#ifdef CONFIG_SD_BOOT
+	puts("SD\n");
+#elif CONFIG_QSPI_BOOT
+	puts("QSPI\n");
+#else
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
 
@@ -51,6 +59,7 @@ int checkboard(void)
 		printf("IFCCard\n");
 	else
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
 
 	printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
 	       QIXIS_READ(id), QIXIS_READ(arch));
@@ -165,6 +174,36 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+
+	/* Set global data pointer */
+	gd = &gdata;
+
+	/* Clear the BSS */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+#ifdef CONFIG_FSL_IFC
+	init_early_memctl_regs();
+#endif
+
+	get_clocks();
+
+	preloader_console_init();
+
+#ifdef CONFIG_SPL_I2C_SUPPORT
+	i2c_init_all();
+#endif
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+	dram_init();
+
+	board_init_r(NULL, 0);
+}
+#endif
+
 int config_board_mux(int ctrl_type)
 {
 	u8 reg12;
diff --git a/board/freescale/ls1021aqds/ls102xa_pbi.cfg b/board/freescale/ls1021aqds/ls102xa_pbi.cfg
new file mode 100644
index 0000000..f1a1b63
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_pbi.cfg
@@ -0,0 +1,12 @@
+#PBI commands
+
+09570200 ffffffff
+09570158 00000300
+8940007c 21f47300
+
+#Configure Scratch register
+09ee0200 10000000
+#Configure alternate space
+09570158 00001000
+#Flush PBL data
+096100c0 000FFFFF
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
new file mode 100644
index 0000000..9d99bd8
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+60000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+00000000 001b7200 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#60000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#20024800 001b7200 00000000 00000000