Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

147 files changed, 2706 insertions, 6022 deletions

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 508e3b5..02a824d 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -30,12 +30,12 @@ endif
 LIB	= $(obj)lib$(VENDOR).a
 
 COBJS-${CONFIG_FSL_CADMUS}	+= cadmus.o
-COBJS-${CONFIG_FSL_CDS_EEPROM}	+= cds_eeprom.o
 COBJS-${CONFIG_FSL_VIA}		+= cds_via.o
 COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
 COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o
 COBJS-${CONFIG_PQ_MDS_PIB}	+= pq-mds-pib.o
 COBJS-${CONFIG_ID_EEPROM}	+= sys_eeprom.o
+COBJS-${CONFIG_FSL_SGMII_RISER}	+= sgmii_riser.o
 
 COBJS-${CONFIG_MPC8541CDS}	+= cds_pci_ft.o
 COBJS-${CONFIG_MPC8548CDS}	+= cds_pci_ft.o
diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c
index 5f86de5..db54bc4 100644
--- a/board/freescale/common/cadmus.c
+++ b/board/freescale/common/cadmus.c
@@ -27,8 +27,8 @@
 /*
  * CADMUS Board System Registers
  */
-#ifndef CFG_CADMUS_BASE_REG
-#define CFG_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
+#ifndef CONFIG_SYS_CADMUS_BASE_REG
+#define CONFIG_SYS_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
 #endif
 
 typedef struct cadmus_reg {
@@ -47,7 +47,7 @@ typedef struct cadmus_reg {
 unsigned int
 get_board_version(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	return cadmus->cm_ver;
 }
@@ -56,7 +56,7 @@ get_board_version(void)
 unsigned long
 get_clock_freq(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
 
@@ -74,7 +74,7 @@ get_clock_freq(void)
 unsigned int
 get_pci_slot(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	/*
 	 * PCI slot in USER bits CSR[6:7] by convention.
@@ -86,7 +86,7 @@ get_pci_slot(void)
 unsigned int
 get_pci_dual(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	/*
 	 * PCI DUAL in CM_PCI[3]
diff --git a/board/freescale/common/cds_eeprom.c b/board/freescale/common/cds_eeprom.c
deleted file mode 100644
index 5034e0c..0000000
--- a/board/freescale/common/cds_eeprom.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
-	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
-	u8 idee_major;
-	u8 idee_minor;
-	char idee_serial[10];
-	char idee_errata[2];
-	char idee_date[8];		/* yyyymmdd */
-	/* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
-	uint major = 0;
-	uint minor = 0;
-
-	id_eeprom_t id_eeprom;
-
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
-		 (uchar *) &id_eeprom, sizeof(id_eeprom));
-
-	major = id_eeprom.idee_major;
-	minor = id_eeprom.idee_minor;
-
-	if (major == 0xff && minor == 0xff) {
-		major = minor = 0;
-	}
-
-	return MPC85XX_CPU_BOARD_REV(major,minor);
-}
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 75f782e..2fc878b 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -205,7 +205,7 @@ int fsl_diu_init(int xres,
 	unsigned int i, j;
 
 	debug("Enter fsl_diu_init\n");
-	dr.diu_reg = (struct diu *) (CFG_DIU_ADDR);
+	dr.diu_reg = (struct diu *) (CONFIG_SYS_DIU_ADDR);
 	hw = (struct diu *) dr.diu_reg;
 
 	disable_lcdc();
@@ -242,10 +242,10 @@ int fsl_diu_init(int xres,
 			printf("Unable to allocate fb memory 1\n");
 			return -1;
 		}
-	} else {
-		memset(info->screen_base, 0, info->smem_len);
 	}
 
+	memset(info->screen_base, 0, info->smem_len);
+
 	dr.diu_reg->desc[0] = (unsigned int) &dummy_ad;
 	dr.diu_reg->desc[1] = (unsigned int) &dummy_ad;
 	dr.diu_reg->desc[2] = (unsigned int) &dummy_ad;
@@ -403,7 +403,7 @@ static int map_video_memory(struct fb_info *info, unsigned long bytes_align)
 	mask = bytes_align - 1;
 	offset = (unsigned long)info->screen_base & mask;
 	if (offset) {
-		info->screen_base += offset;
+		info->screen_base += (bytes_align - offset);
 		info->smem_len = info->smem_len - (bytes_align - offset);
 	} else
 		info->smem_len = info->smem_len - bytes_align;
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 64e2e08..96820ac 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -26,6 +26,7 @@
 #include <command.h>
 #include <watchdog.h>
 #include <asm/cache.h>
+#include <asm/io.h>
 
 #include "pixis.h"
 
@@ -206,8 +207,8 @@ void read_from_px_regs_altbank(int set)
 	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
 }
 
-#ifndef CFG_PIXIS_VBOOT_MASK
-#define CFG_PIXIS_VBOOT_MASK	(0x40)
+#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	(0x40)
 #endif
 
 void clear_altbank(void)
@@ -215,7 +216,7 @@ void clear_altbank(void)
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp &= ~CFG_PIXIS_VBOOT_MASK;
+	tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
@@ -226,7 +227,7 @@ void set_altbank(void)
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp |= CFG_PIXIS_VBOOT_MASK;
+	tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
@@ -282,6 +283,76 @@ U_BOOT_CMD(
 	   "diswd	- Disable watchdog timer \n",
 	   NULL);
 
+#ifdef CONFIG_PIXIS_SGMII_CMD
+int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int which_tsec = -1;
+	uchar mask;
+	uchar switch_mask;
+
+	if (argc > 2)
+		if (strcmp(argv[1], "all") != 0)
+			which_tsec = simple_strtoul(argv[1], NULL, 0);
+
+	switch (which_tsec) {
+#ifdef CONFIG_TSEC1
+	case 1:
+		mask = PIXIS_VSPEED2_TSEC1SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC1SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC2
+	case 2:
+		mask = PIXIS_VSPEED2_TSEC2SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC2SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC3
+	case 3:
+		mask = PIXIS_VSPEED2_TSEC3SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC3SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC4
+	case 4:
+		mask = PIXIS_VSPEED2_TSEC4SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC4SER;
+		break;
+#endif
+	default:
+		mask = PIXIS_VSPEED2_MASK;
+		switch_mask = PIXIS_VCFGEN1_MASK;
+		break;
+	}
+
+	/* Toggle whether the switches or FPGA control the settings */
+	if (!strcmp(argv[argc - 1], "switch"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+	else
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+
+	/* If it's not the switches, enable or disable SGMII, as specified */
+	if (!strcmp(argv[argc - 1], "on"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+	else if (!strcmp(argv[argc - 1], "off"))
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+		pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
+		"pixis_set_sgmii"
+		" - Enable or disable SGMII mode for a given TSEC \n",
+		"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
+		"    TSEC num: 1,2,3,4 or 'all'.  'all' is default.\n"
+		"    on - enables SGMII\n"
+		"    off - disables SGMII\n"
+		"    switch - use switch settings\n");
+#endif
+
 /*
  * This function takes the non-integral cpu:mpx pll ratio
  * and converts it to an integer that can be used to assign
@@ -398,7 +469,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 	if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
 	    ||	unknown_param) {
+#ifdef CONFIG_SYS_LONGHELP
 		puts(cmdtp->help);
+#endif
 		return 1;
 	}
 
@@ -428,7 +501,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		if (!(set_px_sysclk(sysclk)
 		      && set_px_corepll(corepll)
 		      && set_px_mpxpll(mpxpll))) {
+#ifdef CONFIG_SYS_LONGHELP
 			puts(cmdtp->help);
+#endif
 			return 1;
 		}
 		read_from_px_regs(1);
@@ -463,7 +538,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 
 U_BOOT_CMD(
-	pixis_reset, CFG_MAXARGS, 1, pixis_reset_cmd,
+	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
 	"pixis_reset - Reset the board using the FPGA sequencer\n",
 	"    pixis_reset\n"
 	"    pixis_reset [altbank]\n"
diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c
new file mode 100644
index 0000000..5ccd6bc
--- /dev/null
+++ b/board/freescale/common/sgmii_riser.c
@@ -0,0 +1,26 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <tsec.h>
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		if (tsec_info[i].flags & TSEC_SGMII)
+			tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
+}
diff --git a/board/freescale/common/sgmii_riser.h b/board/freescale/common/sgmii_riser.h
new file mode 100644
index 0000000..8d56a1f
--- /dev/null
+++ b/board/freescale/common/sgmii_riser.h
@@ -0,0 +1,15 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num);
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index e53ead0..eb58c7f 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -30,8 +30,8 @@
 
 #include "../common/eeprom.h"
 
-#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID)
-#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID"
+#if !defined(CONFIG_SYS_I2C_EEPROM_CCID) && !defined(CONFIG_SYS_I2C_EEPROM_NXID)
+#error "Please define either CONFIG_SYS_I2C_EEPROM_CCID or CONFIG_SYS_I2C_EEPROM_NXID"
 #endif
 
 /**
@@ -40,7 +40,7 @@
  * See application note AN3638 for details.
  */
 static struct __attribute__ ((__packed__)) eeprom {
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'CCID' */
 	u8 major;         /* 0x04        Board revision, major */
 	u8 minor;         /* 0x05        Board revision, minor */
@@ -53,7 +53,7 @@ static struct __attribute__ ((__packed__)) eeprom {
 	u8 mac[8][6];     /* 0x42 - 0x71 MAC addresses */
 	u32 crc;          /* 0x72        CRC32 checksum */
 #endif
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'NXID' */
 	u8 sn[12];        /* 0x04 - 0x0F Serial Number */
 	u8 errata[5];     /* 0x10 - 0x14 Errata Level */
@@ -74,12 +74,12 @@ static struct __attribute__ ((__packed__)) eeprom {
 /* Set to 1 if we've read EEPROM into memory */
 static int has_been_read = 0;
 
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 /* Is this a valid NXID EEPROM? */
 #define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D'))
 #endif
 
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 /* Is this a valid CCID EEPROM? */
 #define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
 #endif
@@ -93,7 +93,7 @@ static void show_eeprom(void)
 	unsigned int crc;
 
 	/* EEPROM tag ID, either CCID or NXID */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
 		be32_to_cpu(e.version));
 #else
@@ -104,7 +104,7 @@ static void show_eeprom(void)
 	printf("SN: %s\n", e.sn);
 
 	/* Errata level. */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	printf("Errata: %s\n", e.errata);
 #else
 	printf("Errata: %c%c\n",
@@ -152,22 +152,22 @@ static void show_eeprom(void)
 static int read_eeprom(void)
 {
 	int ret;
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	unsigned int bus;
 #endif
 
 	if (has_been_read)
 		return 0;
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
 
-	ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+	ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		(void *)&e, sizeof(e));
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	i2c_set_bus_num(bus);
 #endif
 
@@ -188,12 +188,12 @@ static int prog_eeprom(void)
 	int ret, i, length;
 	unsigned int crc;
 	void *p;
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	unsigned int bus;
 #endif
 
 	/* Set the reserved values to 0xFF   */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	e.res_0 = 0xFF;
 	memset(e.res_1, 0xFF, sizeof(e.res_1));
 #else
@@ -204,20 +204,20 @@ static int prog_eeprom(void)
 	crc = crc32(0, (void *)&e, length - 4);
 	e.crc = cpu_to_be32(crc);
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
 
 	for (i = 0, p = &e; i < length; i += 8, p += 8) {
-		ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN,
+		ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 			p, min((length - i), 8));
 		if (ret)
 			break;
 		udelay(5000);	/* 5ms write cycle timing */
 	}
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	i2c_set_bus_num(bus);
 #endif
 
@@ -343,7 +343,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
 		break;
 	case 'e':	/* errata */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 		memset(e.errata, 0, 5);
 		strncpy((char *)e.errata, argv[2], 4);
 #else
@@ -429,7 +429,7 @@ int mac_read_from_eeprom(void)
 	return 0;
 }
 
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 
 /**
  * get_cpu_board_revision - get the CPU board revision on 85xx boards
@@ -439,11 +439,11 @@ int mac_read_from_eeprom(void)
  * This function is called before relocation, so we need to read a private
  * copy of the EEPROM into a local variable on the stack.
  *
- * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM.  The global
- * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM,
+ * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM.  The global
+ * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM,
  * so that the SPD code will work.  This means that all pre-relocation I2C
- * operations can only occur on the CFG_SPD_BUS_NUM bus.  So if
- * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when
+ * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus.  So if
+ * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when
  * this function is called.  Oh well.
  */
 unsigned int get_cpu_board_revision(void)
@@ -454,7 +454,7 @@ unsigned int get_cpu_board_revision(void)
 		u8 minor;         /* 0x05        Board revision, minor */
 	} be;
 
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		(void *)&be, sizeof(be));
 
 	if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
@@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void)
 	if ((be.major == 0xff) && (be.minor == 0xff))
 		return MPC85XX_CPU_BOARD_REV(0, 0);
 
-	return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+	return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
 }
 #endif
diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk
index ce014ed..b42fcc9 100644
--- a/board/freescale/m52277evb/config.mk
+++ b/board/freescale/m52277evb/config.mk
@@ -22,4 +22,6 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
index e5f47d2..9109edb 100644
--- a/board/freescale/m52277evb/m52277evb.c
+++ b/board/freescale/m52277evb/m52277evb.c
@@ -38,10 +38,20 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
+	u32 dramsize;
+
+#ifdef CONFIG_CF_SBF
+	/*
+	 * Serial Boot: The dram is already initialized in start.S
+	 * only require to return DRAM size
+	 */
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+#else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
-	u32 dramsize, i;
+	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -49,31 +59,39 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Issue LEMR */
-	/*sdram->sdmr = CFG_SDRAM_EMOD; */
-	sdram->sdmr = CFG_SDRAM_MODE;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
+	__asm__("nop");
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
+	__asm__("nop");
 
 	udelay(1000);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00;
 
 	udelay(100);
-
+#endif
 	return (dramsize);
 };
 
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.spa
index 098e9d3..7ae70d4 100644
--- a/board/freescale/m52277evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.spa
@@ -63,7 +63,7 @@ SECTIONS
     common/main.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m52277evb/u-boot.stm
index 33133a0..03ff532 100644
--- a/board/freescale/m5235evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.stm
@@ -33,11 +33,11 @@ SECTIONS
   .dynsym        : { *(.dynsym)		}
   .dynstr        : { *(.dynstr)		}
   .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
+  .rela.text     : { *(.rela.text) 	}
   .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
   .rel.got       : { *(.rel.got)		}
   .rela.got      : { *(.rela.got)		}
   .rel.ctors     : { *(.rel.ctors)	}
@@ -55,15 +55,7 @@ SECTIONS
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf523x/start.o		(.text)
-    cpu/mcf523x/cpu_init.o	(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    cpu/mcf5227x/start.o		(.text)
 
     *(.text)
     *(.fixup)
@@ -129,7 +121,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss       :
   {
    _sbss = .;
    *(.sbss) *(.scommon)
diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5235evb/Makefile
+++ b/board/freescale/m5235evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c
index bd8a4e5..b9e6126 100644
--- a/board/freescale/m5235evb/m5235evb.c
+++ b/board/freescale/m5235evb/m5235evb.c
@@ -57,7 +57,7 @@ phys_size_t initdram(int board_type)
 	    GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS |
 	    GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3);
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
@@ -65,7 +65,7 @@ phys_size_t initdram(int board_type)
 	i--;
 
 	if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) {
-		dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+		dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ);
 
 		/* Initialize DRAM Control Register: DCR */
 		sdram->dcr = SDRAMC_DCR_RTIM_9CLKS |
@@ -73,7 +73,7 @@ phys_size_t initdram(int board_type)
 
 		/* Initialize DACR0 */
 		sdram->dacr0 =
-		    SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
+		    SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
 		    SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32;
 		asm("nop");
 
@@ -90,7 +90,7 @@ phys_size_t initdram(int board_type)
 		}
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xA5A59696;
 
 		/*  Set RE (bit 15) in DACR */
 		sdram->dacr0 |= SDRAMC_DARCn_RE;
@@ -105,7 +105,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Write to the SDRAM Mode Register */
-		*(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
 
 	return dramsize;
diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c
deleted file mode 100644
index 1fd4d99..0000000
--- a/board/freescale/m5235evb/mii.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16
index 4ca026f..c134884 100644
--- a/board/freescale/m5235evb/u-boot.16
+++ b/board/freescale/m5235evb/u-boot.16
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32
index eeffdfb..53c337d 100644
--- a/board/freescale/m5235evb/u-boot.32
+++ b/board/freescale/m5235evb/u-boot.32
@@ -71,7 +71,7 @@ SECTIONS
     lib_generic/libgeneric.a	(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c
index c9ed341..b1ccbeb 100644
--- a/board/freescale/m5249evb/m5249evb.c
+++ b/board/freescale/m5249evb/m5249evb.c
@@ -42,7 +42,7 @@ int checkboard (void) {
 	/*
 	 * Set LED on
 	 */
-	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED;
+	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
 	mbar2_writeLong(MCFSIM_GPIO1_OUT, val);   /* Set LED on */
 
 	return 0;
@@ -57,13 +57,13 @@ phys_size_t initdram (int board_type) {
 	 *	RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
 	 */
 
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	/*
 	 * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
 	 */
 	mbar_writeShort(MCFSIM_DCR, 0x8239);
-#elif CFG_PLL_BYPASS
+#elif CONFIG_SYS_PLL_BYPASS
 	/*
 	 * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type) {
 	mbar_writeLong(MCFSIM_DACR0, 0x0000b364);  /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
 	*((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds
index afdb720..aec7e9b 100644
--- a/board/freescale/m5249evb/u-boot.lds
+++ b/board/freescale/m5249evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c
index 1bf1e97..08f767d 100644
--- a/board/freescale/m5253demo/flash.c
+++ b/board/freescale/m5253demo/flash.c
@@ -28,7 +28,7 @@
 
 #include <asm/immap.h>
 
-#ifndef CFG_FLASH_CFI
+#ifndef CONFIG_SYS_FLASH_CFI
 typedef unsigned short FLASH_PORT_WIDTH;
 typedef volatile unsigned short FLASH_PORT_WIDTHV;
 
@@ -49,14 +49,14 @@ int flash_get_offsets(ulong base, flash_info_t * info);
 int write_word(flash_info_t * info, FPWV * dest, u16 data);
 void inline spin_wheel(void);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 ulong flash_init(void)
 {
 	ulong size = 0;
 	ulong fbase = 0;
 
-	fbase = (ulong) CFG_FLASH_BASE;
+	fbase = (ulong) CONFIG_SYS_FLASH_BASE;
 	flash_get_size((FPWV *) fbase, &flash_info[0]);
 	flash_get_offsets((ulong) fbase, &flash_info[0]);
 	fbase += flash_info[0].size;
@@ -64,8 +64,8 @@ ulong flash_init(void)
 
 	/* Protect monitor and environment sectors */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	return size;
 }
@@ -77,8 +77,8 @@ int flash_get_offsets(ulong base, flash_info_t * info)
 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
 
 		info->start[0] = base;
-		for (k = 0, j = 0; j < CFG_SST_SECT; j++, k++) {
-			info->start[k + 1] = info->start[k] + CFG_SST_SECTSZ;
+		for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) {
+			info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ;
 			info->protect[k] = 0;
 		}
 	}
@@ -174,16 +174,16 @@ ulong flash_get_size(FPWV * addr, flash_info_t * info)
 
 	info->sector_count = 0;
 	info->size = 0;
-	info->sector_count = CFG_SST_SECT;
-	info->size = CFG_SST_SECT * CFG_SST_SECTSZ;
+	info->sector_count = CONFIG_SYS_SST_SECT;
+	info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ;
 
 	/* reset ID mode */
 	*addr = (FPWV) 0x00F000F0;
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+		       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	return (info->size);
@@ -235,7 +235,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	start = get_timer(0);
 	last = start;
 
-	if ((s_last - s_first) == (CFG_SST_SECT - 1)) {
+	if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) {
 		if (prot == 0) {
 			addr = (FPWV *) info->start[0];
 
@@ -255,7 +255,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 					count = 0;
 				}
 
-				if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf("Timeout\n");
 					*addr = 0x00F0;	/* reset to read mode */
 
@@ -271,7 +271,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 				enable_interrupts();
 
 			return 0;
-		} else if (prot == CFG_SST_SECT) {
+		} else if (prot == CONFIG_SYS_SST_SECT) {
 			return 1;
 		}
 	}
@@ -294,7 +294,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 
 					flag = disable_interrupts();
 
-					base = (FPWV *) (CFG_FLASH_BASE);	/* First sector */
+					base = (FPWV *) (CONFIG_SYS_FLASH_BASE);	/* First sector */
 
 					base[FLASH_CYCLE1] = 0x00AA;	/* unlock */
 					base[FLASH_CYCLE2] = 0x0055;	/* unlock */
@@ -308,7 +308,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 
 					while ((*addr & 0x0080) != 0x0080) {
 						if (get_timer(start) >
-						    CFG_FLASH_ERASE_TOUT) {
+						    CONFIG_SYS_FLASH_ERASE_TOUT) {
 							printf("Timeout\n");
 							*addr = 0x00F0;	/* reset to read mode */
 
@@ -424,7 +424,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data)
 		return (2);
 	}
 
-	base = (FPWV *) (CFG_FLASH_BASE);
+	base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
 
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
@@ -444,7 +444,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data)
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (u8) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
index 2eb6a04..b39cd4d 100644
--- a/board/freescale/m5253demo/m5253demo.c
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -45,7 +45,7 @@ phys_size_t initdram(int board_type)
 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
 		u32 RC, temp;
 
-		RC = (CFG_CLK / 1000000) >> 1;
+		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
 		RC = (RC * 15) >> 4;
 
 		/* Initialize DRAM Control Register: DCR */
@@ -56,7 +56,7 @@ phys_size_t initdram(int board_type)
 		__asm__("nop");
 
 		/* Initialize DMR0 */
-		dramsize = (CFG_SDRAM_SIZE << 20);
+		dramsize = (CONFIG_SYS_SDRAM_SIZE << 20);
 		temp = (dramsize - 1) & 0xFFFC0000;
 		mbar_writeLong(MCFSIM_DMR0, temp | 1);
 		__asm__("nop");
@@ -65,7 +65,7 @@ phys_size_t initdram(int board_type)
 		__asm__("nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 		__asm__("nop");
 
 		/* Set RE bit in DACR */
@@ -81,7 +81,7 @@ phys_size_t initdram(int board_type)
 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
 		__asm__("nop");
 
-		*(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
 	}
 
 	return dramsize;
@@ -104,7 +104,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -121,7 +121,7 @@ void ide_set_reset(int idereset)
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
 
 #define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / (CFG_CLK / 2);	/* period in ns */
+		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
 		ata->t1 = CALC_TIMING(piotms[2][0]);
diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds
index 4bdea5e..a295764 100644
--- a/board/freescale/m5253demo/u-boot.lds
+++ b/board/freescale/m5253demo/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
 
     *(.text)
diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c
index f3b1efd..ae69f67 100644
--- a/board/freescale/m5253evbe/m5253evbe.c
+++ b/board/freescale/m5253evbe/m5253evbe.c
@@ -43,7 +43,7 @@ phys_size_t initdram(int board_type)
 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
 		u32 RC, dramsize;
 
-		RC = (CFG_CLK / 1000000) >> 1;
+		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
 		RC = (RC * 15) >> 4;
 
 		/* Initialize DRAM Control Register: DCR */
@@ -54,7 +54,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Initialize DMR0 */
-		dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000;
+		dramsize = ((CONFIG_SYS_SDRAM_SIZE << 20) - 1) & 0xFFFC0000;
 		mbar_writeLong(MCFSIM_DMR0, dramsize | 1);
 		asm("nop");
 
@@ -62,7 +62,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 		asm("nop");
 
 		/* Set RE bit in DACR */
@@ -78,10 +78,10 @@ phys_size_t initdram(int board_type)
 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
 		asm("nop");
 
-		*(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
 	}
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
 int testdram(void)
@@ -101,7 +101,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -118,7 +118,7 @@ void ide_set_reset(int idereset)
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
 
 #define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / (CFG_CLK / 2);	/* period in ns */
+		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
 		ata->t1 = CALC_TIMING(piotms[2][0]);
diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds
index 6d225f5..239cf95 100644
--- a/board/freescale/m5253evbe/u-boot.lds
+++ b/board/freescale/m5253evbe/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5271evb/Makefile
+++ b/board/freescale/m5271evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c
index e089d5f..5505cc4 100644
--- a/board/freescale/m5271evb/m5271evb.c
+++ b/board/freescale/m5271evb/m5271evb.c
@@ -66,7 +66,7 @@ phys_size_t initdram (int board_type) {
 		 * PS: 32bit port size
 		 */
 		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18)
+				MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18)
 				| MCF_SDRAMC_DACRn_CASL(1)
 				| MCF_SDRAMC_DACRn_CBM(3)
 				| MCF_SDRAMC_DACRn_PS(0));
@@ -85,7 +85,7 @@ phys_size_t initdram (int board_type) {
 			asm(" nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *)(CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 
 		/* Set RE bit in DACR */
 		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
@@ -108,10 +108,10 @@ phys_size_t initdram (int board_type) {
 		 * Burst Type = Sequential
 		 * Burst Length = 1
 		 */
-		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
 	}
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 int testdram (void) {
diff --git a/board/freescale/m5271evb/mii.c b/board/freescale/m5271evb/mii.c
deleted file mode 100644
index 78a7028..0000000
--- a/board/freescale/m5271evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds
index c07d023..0bc7fa1 100644
--- a/board/freescale/m5271evb/u-boot.lds
+++ b/board/freescale/m5271evb/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile
index be704b7..424ab1c 100644
--- a/board/freescale/m5272c3/Makefile
+++ b/board/freescale/m5272c3/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5272c3/flash.c b/board/freescale/m5272c3/flash.c
deleted file mode 100644
index ea0b1fd..0000000
--- a/board/freescale/m5272c3/flash.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define PHYS_FLASH_1 CFG_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (AMD_ID_PL160CB & FLASH_TYPEMASK):
-		printf ("AM29PL160CB (16Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-      Done:
-	return;
-}
-
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(AMD_MANUFACT & FLASH_VENDMASK) |
-			(AMD_ID_PL160CB & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured to many flash banks!\n");
-
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			if (j == 0) {
-				/* 1st is 16 KiB */
-				flash_info[i].start[j] = flashbase;
-			}
-			if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x4000 + 0x2000 * (j - 1);
-			}
-			if (j == 3) {
-				/* 4th is 224 KiB */
-				flash_info[i].start[j] = flashbase + 0x8000;
-			}
-			if ((j >= 4) && (j <= 10)) {
-				/* rest is 256 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x40000 + 0x40000 * (j -
-									 4);
-			}
-		}
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0x3ffff, &flash_info[0]);
-
-	return size;
-}
-
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result;
-	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
-	int chip1;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	printf ("\n");
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		set_timer (0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile u16 *addr =
-				(volatile u16 *) (info->start[sect]);
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			chip1 = 0;
-
-			do {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					chip1 = TMO;
-					break;
-				}
-
-				if (!chip1
-				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-					chip1 = READY;
-
-			} while (!chip1);
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
-				goto outahere;
-			}
-			if (chip1 == TMO) {
-				rc = ERR_TIMOUT;
-				goto outahere;
-			}
-
-			printf ("ok.\n");
-		} else {	/* it was protected */
-
-			printf ("protected!\n");
-		}
-	}
-
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-      outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay (10000);
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile u16 *addr = (volatile u16 *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int cflag, iflag;
-	int chip1;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	set_timer (0);
-
-	/* wait until flash is ready */
-	chip1 = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-			chip1 = ERR | TMO;
-			break;
-		}
-		if (!chip1 && ((result & 0x80) == (data & 0x80)))
-			chip1 = READY;
-
-	} while (!chip1);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	}
-
-#if 0
-	if (cnt & 1) {
-		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
-	}
-#endif
-
-	wp = addr;
-
-	if (addr & 1) {
-		data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
-							  src);
-		if ((rc = write_word (info, wp - 1, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	while (cnt >= 2) {
-		data = *((volatile u16 *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src) << 8) |
-			*((volatile u8 *) (wp + 1));
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c
index d17cb2e..902ca3a 100644
--- a/board/freescale/m5272c3/m5272c3.c
+++ b/board/freescale/m5272c3/m5272c3.c
@@ -40,7 +40,7 @@ phys_size_t initdram (int board_type) {
 	/* Dummy write to start SDRAM */
 	*((volatile unsigned long *)0) = 0;
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 	};
 
 int testdram (void) {
diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c
deleted file mode 100644
index b30ba80..0000000
--- a/board/freescale/m5272c3/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds
index 8420c91..e5c7b67 100644
--- a/board/freescale/m5272c3/u-boot.lds
+++ b/board/freescale/m5272c3/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c
index be19e02..35c9b20 100644
--- a/board/freescale/m5275evb/m5275evb.c
+++ b/board/freescale/m5275evb/m5275evb.c
@@ -44,7 +44,7 @@ phys_size_t initdram(int board_type)
 	gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */
 
 	/* Set up chip select */
-	sdp->sdbar0 = CFG_SDRAM_BASE;
+	sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE;
 	sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V;
 
 	/* Set up timing */
@@ -58,34 +58,34 @@ phys_size_t initdram(int board_type)
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
 
 	/* Dummy write to start SDRAM */
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LEMR */
 	sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR
 			| MCF_SDRAMC_SDMR_AD(0x0)
 			| MCF_SDRAMC_SDMR_CMD;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LMR */
 	sdp->sdmr = 0x058d0000;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
 	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
 
 	/* Set precharge */
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop manual precharge, send 2 IREF */
 	sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL);
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IREF;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Write mode register, clear reset DLL */
 	sdp->sdmr = 0x018d0000;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
 	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
@@ -100,7 +100,7 @@ phys_size_t initdram(int board_type)
 		| MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1)
 		| MCF_SDRAMC_SDCR_DQS_OE(0x3);
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 int testdram(void)
diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c
deleted file mode 100644
index 6c7ace9..0000000
--- a/board/freescale/m5275evb/mii.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
-
-	if (setclear) {
-		/* Enable Ethernet pins */
-		if (info->iobase == CFG_FEC0_IOBASE) {
-			gpio->par_feci2c |= 0x0F00;
-			gpio->par_fec0hl |= 0xC0;
-		} else {
-			gpio->par_feci2c |= 0x00A0;
-			gpio->par_fec1hl |= 0xC0;
-		}
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE) {
-			gpio->par_feci2c &= ~0x0F00;
-			gpio->par_fec0hl &= ~0xC0;
-		} else {
-			gpio->par_feci2c &= ~0x00A0;
-			gpio->par_fec1hl &= ~0xC0;
-		}
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif	/* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds
index d810ebc..a3e03d5 100644
--- a/board/freescale/m5275evb/u-boot.lds
+++ b/board/freescale/m5275evb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5282evb/Makefile
+++ b/board/freescale/m5282evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5282evb/m5282evb.c b/board/freescale/m5282evb/m5282evb.c
index 31d6923..b0c9fc8 100644
--- a/board/freescale/m5282evb/m5282evb.c
+++ b/board/freescale/m5282evb/m5282evb.c
@@ -36,7 +36,7 @@ phys_size_t initdram (int board_type)
 {
 	u32 dramsize, i, dramclk;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
@@ -45,7 +45,7 @@ phys_size_t initdram (int board_type)
 
 	if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE))
 	{
-		dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+		dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ);
 
 		/* Initialize DRAM Control Register: DCR */
 		MCFSDRAMC_DCR = (0
@@ -55,7 +55,7 @@ phys_size_t initdram (int board_type)
 
 		/* Initialize DACR0 */
 		MCFSDRAMC_DACR0 = (0
-			| MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE)
+			| MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE)
 			| MCFSDRAMC_DACR_CASL(1)
 			| MCFSDRAMC_DACR_CBM(3)
 			| MCFSDRAMC_DACR_PS_32);
@@ -77,7 +77,7 @@ phys_size_t initdram (int board_type)
 		}
 
 		/* Write to this block to initiate precharge */
-		*(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xA5A59696;
 		asm("nop");
 
 		/* Set RE (bit 15) in DACR */
@@ -94,7 +94,7 @@ phys_size_t initdram (int board_type)
 		asm("nop");
 
 		/* Write to the SDRAM Mode Register */
-		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
 	return dramsize;
 }
diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c
deleted file mode 100644
index 8ae2ec6..0000000
--- a/board/freescale/m5282evb/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds
index 96fde65..707b228 100644
--- a/board/freescale/m5282evb/u-boot.lds
+++ b/board/freescale/m5282evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/crc32.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m53017evb/Makefile b/board/freescale/m53017evb/Makefile
new file mode 100644
index 0000000..981763d
--- /dev/null
+++ b/board/freescale/m53017evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m53017evb/config.mk b/board/freescale/m53017evb/config.mk
new file mode 100644
index 0000000..ce014ed
--- /dev/null
+++ b/board/freescale/m53017evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c
new file mode 100644
index 0000000..f331786
--- /dev/null
+++ b/board/freescale/m53017evb/m53017evb.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale M53017EVB\n");
+	return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+#endif
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	asm("nop");
+
+	/* Issue LEMR */
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
+	asm("nop");
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	asm("nop");
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds
index 1aa53c2..dc53141 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m53017evb/u-boot.lds
@@ -55,14 +55,14 @@ SECTIONS
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf5445x/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
+    cpu/mcf532x/start.o		(.text)
+    cpu/mcf532x/libmcf532x.a	(.text)
+    lib_m68k/libm68k.a		(.text)
     common/dlmalloc.o		(.text)
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5329evb/Makefile
+++ b/board/freescale/m5329evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
index f9fa9fb..b4df22f 100644
--- a/board/freescale/m5329evb/m5329evb.c
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -42,7 +42,7 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -50,29 +50,29 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CFG_SDRAM_BASE | i);
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 
diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c
deleted file mode 100644
index 8f6abf3..0000000
--- a/board/freescale/m5329evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index f84912e..cf27dda 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -36,56 +36,42 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <linux/mtd/mtd.h>
 
 #define SET_CLE		0x10
-#define CLR_CLE		~SET_CLE
 #define SET_ALE		0x08
-#define CLR_ALE		~SET_ALE
 
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-/*	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			nand_baseaddr |= SET_CLE;
-		else
-			nand_baseaddr &= CLR_CLE;
-		if ( ctrl & NAND_ALE )
-			nand_baseaddr |= SET_ALE;
-		else
-			nand_baseaddr &= CLR_ALE;
-	}
-	this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
+		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
 
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
 
-static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	*((volatile u8 *)(this->IO_ADDR_W)) = byte;
-}
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= SET_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= SET_ALE;
 
-static u8 nand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	return (u8) (*((volatile u8 *)this->IO_ADDR_R));
-}
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
+	}
 
-static int nand_dev_ready(struct mtd_info *mtdinfo)
-{
-	return 1;
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
 int board_nand_init(struct nand_chip *nand)
 {
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
-	*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
-
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
@@ -95,9 +81,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->chip_delay = 50;
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->cmd_ctrl = nand_hwcontrol;
-	nand->read_byte = nand_read_byte;
-	nand->write_byte = nand_write_byte;
-	nand->dev_ready = nand_dev_ready;
 
 	return 0;
 }
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
index 1ddfbc4..c9da922 100644
--- a/board/freescale/m5329evb/u-boot.lds
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5373evb/Makefile
+++ b/board/freescale/m5373evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c
index a269ee6..376de4b 100644
--- a/board/freescale/m5373evb/m5373evb.c
+++ b/board/freescale/m5373evb/m5373evb.c
@@ -42,7 +42,7 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -50,29 +50,29 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CFG_SDRAM_BASE | i);
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 
diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c
deleted file mode 100644
index 8f6abf3..0000000
--- a/board/freescale/m5373evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index 404a9c3..3ebef05 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -41,19 +41,21 @@ DECLARE_GLOBAL_DATA_PTR;
 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-		IO_ADDR_W &= ~(SET_ALE | SE_CLE);
 
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
+
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= SET_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= SET_ALE;
 
-		at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
 		this->IO_ADDR_W = (void *)IO_ADDR_W;
 
 	}
@@ -67,10 +69,13 @@ int board_nand_init(struct nand_chip *nand)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 
-	*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
 	fbcs->csmr2 &= ~FBCS_CSMR_WP;
 
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
index d30a401..fcf1ff1 100644
--- a/board/freescale/m5373evb/u-boot.lds
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54451evb/Makefile
+++ b/board/freescale/m54451evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c
index 768f40b..088c8c4 100644
--- a/board/freescale/m54451evb/m54451evb.c
+++ b/board/freescale/m54451evb/m54451evb.c
@@ -49,16 +49,16 @@ phys_size_t initdram(int board_type)
 	 * Serial Boot: The dram is already initialized in start.S
 	 * only require to return DRAM size
 	 */
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 #else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
 	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
-	if ((sdram->sdcfg1 == CFG_SDRAM_CFG1) &&
-	    (sdram->sdcfg2 == CFG_SDRAM_CFG2))
+	if ((sdram->sdcfg1 == CONFIG_SYS_SDRAM_CFG1) &&
+	    (sdram->sdcfg2 == CONFIG_SYS_SDRAM_CFG2))
 		return dramsize;
 
 	for (i = 0x13; i < 0x20; i++) {
@@ -67,32 +67,32 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH;
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	udelay(200);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 	__asm__("nop");
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 	__asm__("nop");
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 	__asm__("nop");
 
 	/* Issue LEMR */
-	sdram->sdmr = CFG_SDRAM_MODE;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
 	__asm__("nop");
-	sdram->sdmr = CFG_SDRAM_EMOD;
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
 	__asm__("nop");
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000000;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000;
 
 	udelay(100);
 #endif
diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c
deleted file mode 100644
index 5a4330c..0000000
--- a/board/freescale/m54451evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_KSZ8041NL	0x00221512
-#define STR_ID_KSZ8041NL	"KSZ8041NL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					strcpy(info->phy_name,
-					       STR_ID_KSZ8041NL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					printf(STR_ID_KSZ8041NL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54451evb/u-boot.spa b/board/freescale/m54451evb/u-boot.spa
index 22c6048..08e184c 100644
--- a/board/freescale/m54451evb/u-boot.spa
+++ b/board/freescale/m54451evb/u-boot.spa
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54451evb/u-boot.stm b/board/freescale/m54451evb/u-boot.stm
index 0752e27..e9eac67 100644
--- a/board/freescale/m54451evb/u-boot.stm
+++ b/board/freescale/m54451evb/u-boot.stm
@@ -68,7 +68,7 @@ SECTIONS
     board/freescale/m54455evb/m54455evb.o	(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 */
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 100682a..293b5b0 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -45,13 +45,13 @@ phys_size_t initdram(int board_type)
 	 * Serial Boot: The dram is already initialized in start.S
 	 * only require to return DRAM size
 	 */
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 #else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
 	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -59,33 +59,33 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH;
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
-	sdram->sdcs1 = (CFG_SDRAM_BASE1 | i);
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i);
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->sdmr = CFG_SDRAM_EMOD | 0x408;
-	sdram->sdmr = CFG_SDRAM_MODE | 0x300;
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300;
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->sdmr = CFG_SDRAM_MODE | 0x200;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200;
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 #endif
@@ -175,11 +175,11 @@ void pci_init_board(void)
 #include <flash.h>
 ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 {
-	int sect[] = CFG_ATMEL_SECT;
-	int sectsz[] = CFG_ATMEL_SECTSZ;
+	int sect[] = CONFIG_SYS_ATMEL_SECT;
+	int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
 	int i, j, k;
 
-	if (base != CFG_ATMEL_BASE)
+	if (base != CONFIG_SYS_ATMEL_BASE)
 		return 0;
 
 	info->flash_id          = 0x01000000;
@@ -205,9 +205,9 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	info->name              = "CFI conformant";
 
 	info->size              = 0;
-	info->sector_count      = CFG_ATMEL_TOTALSECT;
+	info->sector_count      = CONFIG_SYS_ATMEL_TOTALSECT;
 	info->start[0] = base;
-	for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
+	for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
 		info->size += sect[i] * sectsz[i];
 
 		for (j = 0; j < sect[i]; j++, k++) {
@@ -218,4 +218,4 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 
 	return 1;
 }
-#endif				/* CFG_FLASH_CFI */
+#endif				/* CONFIG_SYS_FLASH_CFI */
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
deleted file mode 100644
index 0be5439..0000000
--- a/board/freescale/m54455evb/mii.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm
index 22c6048..08e184c 100644
--- a/board/freescale/m54455evb/u-boot.atm
+++ b/board/freescale/m54455evb/u-boot.atm
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m547xevb/Makefile
+++ b/board/freescale/m547xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
index 6d7d270..9f1ec38 100644
--- a/board/freescale/m547xevb/m547xevb.c
+++ b/board/freescale/m547xevb/m547xevb.c
@@ -43,53 +43,53 @@ phys_size_t initdram(int board_type)
 	volatile siu_t *siu = (siu_t *) (MMAP_SIU);
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
-#ifdef CFG_DRAMSZ1
+#ifdef CONFIG_SYS_DRAMSZ1
 	u32 temp;
 #endif
 
-	siu->drv = CFG_SDRAM_DRVSTRENGTH;
+	siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
 
-	dramsize = CFG_DRAMSZ * 0x100000;
+	dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
 	}
 	i--;
-	siu->cs0cfg = (CFG_SDRAM_BASE | i);
+	siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
 
-#ifdef CFG_DRAMSZ1
-	temp = CFG_DRAMSZ1 * 0x100000;
+#ifdef CONFIG_SYS_DRAMSZ1
+	temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (temp == (1 << i))
 			break;
 	}
 	i--;
 	dramsize += temp;
-	siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+	siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
 #endif
 
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
 
 	udelay(100);
 
diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c
deleted file mode 100644
index 5b2683b..0000000
--- a/board/freescale/m547xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
index cc7f3eb..c25c8dc 100644
--- a/board/freescale/m547xevb/u-boot.lds
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     common/dlmalloc.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m548xevb/Makefile
+++ b/board/freescale/m548xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c
index e6510c9..4a2a5c7 100644
--- a/board/freescale/m548xevb/m548xevb.c
+++ b/board/freescale/m548xevb/m548xevb.c
@@ -44,49 +44,49 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	siu->drv = CFG_SDRAM_DRVSTRENGTH;
+	siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
 
-	dramsize = CFG_DRAMSZ * 0x100000;
+	dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
 	}
 	i--;
-	siu->cs0cfg = (CFG_SDRAM_BASE | i);
+	siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
 
-#ifdef CFG_DRAMSZ1
-	temp = CFG_DRAMSZ1 * 0x100000;
+#ifdef CONFIG_SYS_DRAMSZ1
+	temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (temp == (1 << i))
 			break;
 	}
 	i--;
 	dramsize += temp;
-	siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+	siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
 #endif
 
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
 
 	udelay(100);
 
diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c
deleted file mode 100644
index 5b2683b..0000000
--- a/board/freescale/m548xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
index cc7f3eb..c25c8dc 100644
--- a/board/freescale/m548xevb/u-boot.lds
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     common/dlmalloc.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/mpc7448hpc2/asm_init.S b/board/freescale/mpc7448hpc2/asm_init.S
index 521301f..b9495fd 100644
--- a/board/freescale/mpc7448hpc2/asm_init.S
+++ b/board/freescale/mpc7448hpc2/asm_init.S
@@ -123,7 +123,7 @@ board_asm_init:
 
 /* Initialize pointer to Tsi108 register space */
 
-	LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+	LOAD_PTR(r29,CONFIG_SYS_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
 	ori r4,r29,TSI108_PB_REG_OFFSET
 
 /* Check Processor Version Number */
@@ -214,12 +214,12 @@ do_tsi108_init:
 
 	ori r4,r29,TSI108_PB_REG_OFFSET
 
-#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
+#if (CONFIG_SYS_TSI108_CSR_BASE != CONFIG_SYS_TSI108_CSR_RST_BASE)
 	/* Relocate (if required) Tsi108 registers. Set new value for
 	 * PB_REG_BAR:
 	 * Note we are in the 32-bit address mode.
 	 */
-	LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+	LOAD_U32(r5,(CONFIG_SYS_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
 	stw	r5,PB_REG_BAR(r4)
 	andis.	r29,r5,0xFFFF
 	sync
diff --git a/board/freescale/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c
index 6f74c31..117b951 100644
--- a/board/freescale/mpc7448hpc2/mpc7448hpc2.c
+++ b/board/freescale/mpc7448hpc2/mpc7448hpc2.c
@@ -32,6 +32,7 @@
 #include <common.h>
 #include <74xx_7xx.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #undef	DEBUG
 
@@ -59,7 +60,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -92,3 +93,12 @@ ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#if defined(CONFIG_TSI108_ETH)
+	rc = tsi108_eth_initialize(bis);
+#endif
+	return rc;
+}
diff --git a/board/freescale/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c
index 9c40b72..74bb564 100644
--- a/board/freescale/mpc7448hpc2/tsi108_init.c
+++ b/board/freescale/mpc7448hpc2/tsi108_init.c
@@ -88,7 +88,7 @@ PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
 	{0x00000000, 0x00000240}  /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
 };
 
-#ifdef CFG_CLK_SPREAD
+#ifdef CONFIG_SYS_CLK_SPREAD
 typedef struct {
 	ulong ctrl0;
 	ulong ctrl1;
@@ -111,7 +111,7 @@ static PLL_CTRL_SET pll0_config[8] = {
 	{0x005c0044, 0x00000039},	/* 6: CG_PB_CLKO = 200 MHz */
 	{0x004f0044, 0x0000003e}	/* 7: CG_PB_CLKO = 233 MHz */
 };
-#endif	/* CFG_CLK_SPREAD */
+#endif	/* CONFIG_SYS_CLK_SPREAD */
 
 /*
  * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
@@ -129,7 +129,7 @@ unsigned long get_board_bus_clk (void)
 	ulong i;
 
 	/* Detect PB clock freq. */
-	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
 	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
 
 	return pb_clk_sel[i] * 1000000;
@@ -146,7 +146,7 @@ int board_early_init_f (void)
 	ulong i;
 
 	gd->mem_clk = 0;
-	i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+	i = in32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
 			CG_PWRUP_STATUS);
 	i = (i >> 20) & 0x07;	/* Get GD PLL multiplier */
 	switch (i) {
@@ -182,7 +182,7 @@ int board_early_init_r (void)
 	volatile ulong *reg_ptr;
 
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
 
 	for (i = 0; i < 32; i++) {
 		*reg_ptr++ = 0x00000201;	/* SWAP ENABLED */
@@ -194,7 +194,7 @@ int board_early_init_r (void)
 
 	/* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
 		0x80000001);
 	__asm__ __volatile__ ("sync");
 
@@ -202,7 +202,7 @@ int board_early_init_r (void)
 	 * read from SDRAM)
 	 */
 
-	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+	temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -221,7 +221,7 @@ int board_early_init_r (void)
 	 * initialize pointer to LUT associated with PB_OCN_BAR1
 	 */
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
 
 	for (i = 0; i < 32; i++) {
 		*reg_ptr++ = pb2ocn_lut1[i].lower;
@@ -232,73 +232,73 @@ int board_early_init_r (void)
 
 	/* Base addresses for CS0, CS1, CS2, CS3 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
 		0x00000000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
 		0x00100000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
 		0x00200000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
 		0x00300000);
 	__asm__ __volatile__ ("sync");
 
 	/* Masks for HLP banks */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
 	/* Set CTRL0 values for banks */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
 		0x7FFC44C2);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
 		0x7FFC44C0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
 		0x7FFC44C0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
 		0x7FFC44C2);
 	__asm__ __volatile__ ("sync");
 
 	/* Set banks to latched mode, enabled, and other default settings */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
@@ -306,7 +306,7 @@ int board_early_init_r (void)
 	 * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
 	 * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
 	 */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
 		0xE0000011);
 	__asm__ __volatile__ ("sync");
 
@@ -314,7 +314,7 @@ int board_early_init_r (void)
 	 * immediate read from SDRAM)
 	 */
 
-	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+	temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -341,7 +341,7 @@ int board_early_init_r (void)
 	temp = get_cpu_type ();
 
 	if ((CPU_750FX == temp) || (CPU_750GX == temp))
-		out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+		out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
 			0x00009955);
 #endif	/* DISABLE_PBM */
 
@@ -351,27 +351,27 @@ int board_early_init_r (void)
 	 */
 
 	/* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
 		PCI_PFAB_BAR0_UPPER, 0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
 		0xFB000001);
 	__asm__ __volatile__ ("sync");
 
 	/* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
 
-	temp =	in32(CFG_TSI108_CSR_BASE +
+	temp =	in32(CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
 
 	temp &= ~0xFF00;	/* Clear the BUS_NUM field */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
 		temp);
 
 	/* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
 		0);
 	__asm__ __volatile__ ("sync");
 
@@ -379,7 +379,7 @@ int board_early_init_r (void)
 	 * and maps it as a IO address.
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
 		0x00000001);
 	__asm__ __volatile__ ("sync");
 
@@ -405,7 +405,7 @@ int board_early_init_r (void)
 	 */
 
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
 
 #ifdef DISABLE_PBM
 
@@ -442,7 +442,7 @@ int board_early_init_r (void)
 	__asm__ __volatile__ ("eieio");
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
@@ -450,9 +450,9 @@ int board_early_init_r (void)
 	 * ( 0 is the best choice for easy mapping)
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
 		0x00000000);
 	__asm__ __volatile__ ("sync");
 
@@ -470,7 +470,7 @@ int board_early_init_r (void)
 	 *  set pointer to LUT associated with PCI P2O_BAR3
 	 */
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
 
 	reg_val = 0x00000004;	/* Destination port = SDC */
 
@@ -490,19 +490,19 @@ int board_early_init_r (void)
 	/* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
 
 	reg_val =
-		in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+		in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
 		 PCI_P2O_PAGE_SIZES);
 	reg_val &= ~0x00FF;
 	reg_val |= 0x0071;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
 	/* Set 64-bit base PCI bus address for window (0x20000000) */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
 		0x20000000);
 	__asm__ __volatile__ ("sync");
 
@@ -511,17 +511,17 @@ int board_early_init_r (void)
 #ifdef ENABLE_PCI_CSR_BAR
 	/* open if required access to Tsi108 CSRs from the PCI/X bus */
 	/* enable BAR0 on the PCI/X bus */
-	reg_val = in32(CFG_TSI108_CSR_BASE +
+	reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
 	reg_val |= 0x02;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
-		CFG_TSI108_CSR_BASE);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+		CONFIG_SYS_TSI108_CSR_BASE);
 	__asm__ __volatile__ ("sync");
 
 #endif
@@ -530,9 +530,9 @@ int board_early_init_r (void)
 	 * Finally enable PCI/X Bus Master and Memory Space access
 	 */
 
-	reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+	reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
 	reg_val |= 0x06;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
 	__asm__ __volatile__ ("sync");
 
 #endif	/* CONFIG_PCI */
@@ -546,10 +546,10 @@ int board_early_init_r (void)
 	 * PB_INT[3] -> MCP (CPU1)
 	 * Set interrupt controller outputs as Level_Sensitive/Active_Low
 	 */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -584,42 +584,42 @@ unsigned long get_l2cr (void)
 
 int misc_init_r (void)
 {
-#ifdef CFG_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
+#ifdef CONFIG_SYS_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
 	ulong i;
 
 	/* Ensure that Spread-Spectrum is disabled */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
 
 	/* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
 	 * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
 		0x002e0044);	/* D = 0.25% */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
 		0x00000039);	/* BWADJ */
 
 	/* Initialize PLL0: CG_PB_CLKO  */
 	/* Detect PB clock freq. */
-	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
 	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
 
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
 
 	/* Wait and set SSEN for both PLL0 and 1 */
 	udelay (1000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
 		0x802e0044);	/* D=0.25% */
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
 		0x80000000 | pll0_config[i].ctrl0);
-#endif	/* CFG_CLK_SPREAD */
+#endif	/* CONFIG_SYS_CLK_SPREAD */
 
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 	printf ("BUS:   %lu MHz\n", gd->bus_clk / 1000000);
diff --git a/board/freescale/mpc7448hpc2/u-boot.lds b/board/freescale/mpc7448hpc2/u-boot.lds
index 6b228f7..f3f6c54 100644
--- a/board/freescale/mpc7448hpc2/u-boot.lds
+++ b/board/freescale/mpc7448hpc2/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c
index 59997aa..e03852f 100644
--- a/board/freescale/mpc8260ads/flash.c
+++ b/board/freescale/mpc8260ads/flash.c
@@ -52,7 +52,7 @@
 #define INTEL_FINISHED 0x80808080
 #define INTEL_OK       0x80808080
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
@@ -66,8 +66,8 @@ unsigned long flash_init (void)
 	ulong size = 0, sect_start, sect_size = 0, bank_size;
 	ushort sect_count = 0;
 	int i, j, nbanks;
-	vu_long *addr = (vu_long *)CFG_FLASH_BASE;
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 	switch (bcsr[2] & 0xF) {
 	case 0:
@@ -80,11 +80,11 @@ unsigned long flash_init (void)
 		nbanks = 1;
 		break;
 	default:		/* Unsupported configurations */
-		nbanks = CFG_MAX_FLASH_BANKS;
+		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
 	}
 
-	if (nbanks > CFG_MAX_FLASH_BANKS)
-		nbanks = CFG_MAX_FLASH_BANKS;
+	if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
+		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
 
 	for (i = 0; i < nbanks; i++) {
 		*addr = INTEL_READID;	/* Read Intelligent Identifier */
@@ -98,9 +98,9 @@ unsigned long flash_init (void)
 				break;
 			default:
 				flash_info[i].flash_id = FLASH_UNKNOWN;
-				sect_count = CFG_MAX_FLASH_SECT;
+				sect_count = CONFIG_SYS_MAX_FLASH_SECT;
 				sect_size =
-				   CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS / CFG_MAX_FLASH_SECT;
+				   CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT;
 			}
 		}
 		else
@@ -127,10 +127,10 @@ unsigned long flash_init (void)
 	}
 
 	if (size == 0) {	/* Unknown flash, fill with hard-coded values */
-		sect_start = CFG_FLASH_BASE;
-		for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		sect_start = CONFIG_SYS_FLASH_BASE;
+		for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS;
+			flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS;
 			flash_info[i].sector_count = sect_count;
 			for (j = 0; j < sect_count; j++) {
 				flash_info[i].start[j]   = sect_start;
@@ -138,28 +138,28 @@ unsigned long flash_init (void)
 				sect_start += sect_size;
 			}
 		}
-		size = CFG_FLASH_SIZE;
+		size = CONFIG_SYS_FLASH_SIZE;
 	}
 	else
-		for (i = nbanks; i < CFG_MAX_FLASH_BANKS; i++) {
+		for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 			flash_info[i].flash_id = FLASH_UNKNOWN;
 			flash_info[i].size = 0;
 			flash_info[i].sector_count = 0;
 		}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -274,7 +274,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 				enable_interrupts();
 
 			while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = INTEL_RESET;	/* reset bank */
 					return 1;
@@ -338,7 +338,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			printf("Write timed out\n");
 			rc = 1;
 			break;
@@ -454,7 +454,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 
 	start = get_timer(0);
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -480,7 +480,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 				addr = (vu_long *)(info->start[i]);
 				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
 				*addr = INTEL_PROTECT;	/* set */
-				udelay(CFG_FLASH_LOCK_TOUT * 1000);
+				udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000);
 			}
 
 	if (flag)
diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c
index 8ab7d35..49a88bb 100644
--- a/board/freescale/mpc8260ads/mpc8260ads.c
+++ b/board/freescale/mpc8260ads/mpc8260ads.c
@@ -58,32 +58,32 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-#define CFG_FCC3 (CONFIG_ETHER_INDEX == 3)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
     {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
+	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
+	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
+	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
+	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
+	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
+	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
 	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
 	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
 	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
 	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
+	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
+	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
+	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
+	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
+	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
+	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
+	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
+	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
 	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
 	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
 	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
@@ -102,34 +102,34 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B configuration */
     {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
-	/* PB16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
-	/* PB15 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
-	/* PB14 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
-	/* PB13 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
-	/* PB12 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
-	/* PB11 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB10 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB9  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB8  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB7  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB6  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB5  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB4  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
+	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
+	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
+	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
+	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
+	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
+	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB17 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
+	/* PB16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
+	/* PB15 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
+	/* PB14 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
+	/* PB13 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
+	/* PB12 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
+	/* PB11 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB10 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB9  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB8  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB7  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB6  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB5  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB4  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
@@ -147,32 +147,32 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25 */
 	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24 */
 	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23 */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
+	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
+	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
 	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	/* PC19 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 	/* PC18 */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-	/* PC17 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
-	/* PC16 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
+	/* PC17 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
+	/* PC16 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
 #else
-	/* PC19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
+	/* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
+	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
 	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
 	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16 */
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
 	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
 	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
 	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12 */
 	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11 */
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10 */
 	/* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9  */
 #else
 	/* PC10 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 	/* PC9  */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8 */
 	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7 */
 	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6 */
@@ -223,10 +223,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 void reset_phy (void)
 {
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 	/* Reset the PHY */
-#if CFG_PHY_ADDR == 0
+#if CONFIG_SYS_PHY_ADDR == 0
 	bcsr[1] &= ~(FETHIEN1 | FETH1_RST);
 	udelay(2);
 	bcsr[1] |=  FETH1_RST;
@@ -234,16 +234,16 @@ void reset_phy (void)
 	bcsr[3] &= ~(FETHIEN2 | FETH2_RST);
 	udelay(2);
 	bcsr[3] |=  FETH2_RST;
-#endif /* CFG_PHY_ADDR == 0 */
+#endif /* CONFIG_SYS_PHY_ADDR == 0 */
 	udelay(1000);
 #ifdef CONFIG_MII
-#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
 	/*
 	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
 	 * Enable autonegotiation.
 	 */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, 16, 0x610);
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
 			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #else
 	/*
@@ -254,14 +254,14 @@ void reset_phy (void)
 	 */
 
 	/* Advertise all capabilities */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_ANAR, 0x01E1);
 
 	/* Do not bypass Rx/Tx (de)scrambler */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR,  0x0000);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_DCR,  0x0000);
 
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
 			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 #endif /* CONFIG_MII */
 }
 
@@ -274,10 +274,10 @@ typedef struct pci_ic_s {
 
 int board_early_init_f (void)
 {
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 #ifdef CONFIG_PCI
-	volatile pci_ic_t* pci_ic = (pci_ic_t *) CFG_PCI_INT;
+	volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 
 	/* mask alll the PCI interrupts */
 	pci_ic->pci_int_mask |= 0xfff00000;
@@ -289,19 +289,19 @@ int board_early_init_f (void)
 	bcsr[1] &= ~RS232EN_2;
 #endif
 
-#if CONFIG_ADSTYPE != CFG_8260ADS /* PCI mode can be selected */
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */
+#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 	{
-		volatile immap_t *immap = (immap_t *) CFG_IMMR;
+		volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 		immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
 		immap->im_siu_conf.sc_siumcr =
 			(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
 			| SIUMCR_LBPC01;
 	}
-#endif /* CONFIG_ADSTYPE != CFG_8260ADS */
+#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */
 
 	return 0;
 }
@@ -310,16 +310,16 @@ int board_early_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-#if   CONFIG_ADSTYPE == CFG_PQ2FADS
+#if   CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	long int msize = 32;
-#elif CONFIG_ADSTYPE == CFG_8272ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	long int msize = 64;
 #else
 	long int msize = 16;
 #endif
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *ramaddr, c = 0xff;
 	uint or;
@@ -332,33 +332,33 @@ phys_size_t initdram (int board_type)
 	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-#ifdef CFG_LSDRAM_BASE
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+#ifdef CONFIG_SYS_LSDRAM_BASE
 	/*
 	  Initialise local bus SDRAM only if the pins
 	  are configured as local bus pins and not as PCI.
 	  The configuration is determined by the HRCW.
 	*/
 	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
-		memctl->memc_lsrt  = CFG_LSRT;
-#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
+		memctl->memc_lsrt  = CONFIG_SYS_LSRT;
+#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */
 		memctl->memc_or3   = 0xFF803280;
-		memctl->memc_br3   = CFG_LSDRAM_BASE | 0x00001861;
+		memctl->memc_br3   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
 #else				  /* CS4 */
 		memctl->memc_or4   = 0xFFC01480;
-		memctl->memc_br4   = CFG_LSDRAM_BASE | 0x00001861;
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
-		memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
-		ramaddr = (uchar *) CFG_LSDRAM_BASE;
+		memctl->memc_br4   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
+		ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
 		for (i = 0; i < 8; i++)
 			*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
 	}
-#endif /* CFG_LSDRAM_BASE */
+#endif /* CONFIG_SYS_LSDRAM_BASE */
 
 	/* Init 60x bus SDRAM */
 #ifdef CONFIG_SPD_EEPROM
@@ -498,14 +498,14 @@ phys_size_t initdram (int board_type)
 #endif /* SPD_DEBUG */
 	}
 #else  /* !CONFIG_SPD_EEPROM */
-	or    = CFG_OR2;
-	psdmr = CFG_PSDMR;
-	psrt  = CFG_PSRT;
+	or    = CONFIG_SYS_OR2;
+	psdmr = CONFIG_SYS_PSDMR;
+	psrt  = CONFIG_SYS_PSRT;
 #endif /* CONFIG_SPD_EEPROM */
 	memctl->memc_psrt = psrt;
 	memctl->memc_or2 = or;
-	memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041;
-	ramaddr = (uchar *) CFG_SDRAM_BASE;
+	memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041;
+	ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
 	memctl->memc_psdmr = psdmr | 0x28000000;	/* Precharge all banks */
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | 0x08000000;	/* CBR refresh */
@@ -516,7 +516,7 @@ phys_size_t initdram (int board_type)
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | 0x40000000;	/* Refresh enable */
 	*ramaddr = c;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/* return total 60x bus SDRAM size */
 	return (msize * 1024 * 1024);
@@ -524,13 +524,13 @@ phys_size_t initdram (int board_type)
 
 int checkboard (void)
 {
-#if   CONFIG_ADSTYPE == CFG_8260ADS
+#if   CONFIG_ADSTYPE == CONFIG_SYS_8260ADS
 	puts ("Board: Motorola MPC8260ADS\n");
-#elif CONFIG_ADSTYPE == CFG_8266ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS
 	puts ("Board: Motorola MPC8266ADS\n");
-#elif CONFIG_ADSTYPE == CFG_PQ2FADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	puts ("Board: Motorola PQ2FADS-ZU\n");
-#elif CONFIG_ADSTYPE == CFG_8272ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	puts ("Board: Motorola MPC8272ADS\n");
 #else
 	puts ("Board: unknown\n");
diff --git a/board/freescale/mpc8266ads/flash.c b/board/freescale/mpc8266ads/flash.c
index 9512c72..06dde36 100644
--- a/board/freescale/mpc8266ads/flash.c
+++ b/board/freescale/mpc8266ads/flash.c
@@ -29,17 +29,17 @@
 #include <common.h>
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -56,7 +56,7 @@ static int clear_block_lock_bit(vu_long * addr);
 unsigned long flash_init (void)
 {
 #ifndef CONFIG_MPC8266ADS
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t	*memctl = &immap->im_memctl;
 	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
 #endif
@@ -71,7 +71,7 @@ unsigned long flash_init (void)
 #endif
 
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		/* set the default sector offset */
@@ -88,28 +88,28 @@ unsigned long flash_init (void)
 
 #ifndef CONFIG_MPC8266ADS
 	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 				(memctl->memc_br1 & ~(BR_BA_MSK));
 #endif
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -336,7 +336,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
 				}
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
@@ -461,7 +461,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer (0);
 	flag  = 0;
 	while (((csr = *addr) & 0x80808080) != 0x80808080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			flag = 1;
 			break;
 		}
@@ -499,7 +499,7 @@ static int clear_block_lock_bit(vu_long  * addr)
 
 	start = get_timer (0);
 	while(*addr != 0x80808080){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout on clearing Block Lock Bit\n");
 			*addr = 0xFFFFFFFF;	/* reset bank */
 			return 1;
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 090a534..66acc41 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -224,7 +224,7 @@ typedef struct pci_ic_s {
 
 void reset_phy(void)
 {
-    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
+    volatile bcsr_t  *bcsr           = (bcsr_t *)CONFIG_SYS_BCSR;
 
     /* reset the FEC port */
     bcsr->bcsr1                    &= ~FETH_RST;
@@ -234,8 +234,8 @@ void reset_phy(void)
 
 int board_early_init_f (void)
 {
-    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
-    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CFG_PCI_INT;
+    volatile bcsr_t  *bcsr         = (bcsr_t *)CONFIG_SYS_BCSR;
+    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 
     bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
 
@@ -254,17 +254,17 @@ int checkboard(void)
 phys_size_t initdram(int board_type)
 {
 	/* Autoinit part stolen from board/sacsng/sacsng.c */
-    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap         = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl   = &immap->im_memctl;
     volatile uchar c = 0xff;
-    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
-    uint  psdmr = CFG_PSDMR;
+    volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
+    uint  psdmr = CONFIG_SYS_PSDMR;
     int i;
 
     uint   psrt = 0x21;					/* for no SPD */
     uint   chipselects = 1;				/* for no SPD */
-    uint   sdram_size = CFG_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
-    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+    uint   sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CONFIG_SYS_OR2_PRELIM;				/* for no SPD */
     uint   data_width;
     uint   rows;
     uint   banks;
@@ -286,7 +286,7 @@ phys_size_t initdram(int board_type)
     /*
      * Read the SDRAM SPD EEPROM via I2C.
      */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
     i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
     spd_size = data;
@@ -506,13 +506,13 @@ phys_size_t initdram(int board_type)
      *  accessing the SDRAM with a single-byte transaction."
      *
      * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
      */
 
-    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR;
     memctl->memc_psrt  = psrt;
 
-    memctl->memc_br2 = CFG_BR2_PRELIM;
+    memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
     memctl->memc_or2 = or;
 
     memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -536,7 +536,7 @@ phys_size_t initdram(int board_type)
 	{
 	ramaddr += sdram_size;
 
-		memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
 		memctl->memc_or3 = or;
 
 		memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index ebb703d..9ffd4bf 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -36,8 +36,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-#ifndef CFG_8313ERDB_BROKEN_PMC
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
@@ -55,28 +55,28 @@ int checkboard(void)
 #ifndef CONFIG_NAND_SPL
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -88,14 +88,14 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF;
 #endif
 
@@ -135,13 +135,13 @@ void ft_board_setup(void *blob, bd_t *bd)
 void board_init_f(ulong bootflag)
 {
 	board_early_init_f();
-	NS16550_init((NS16550_t)(CFG_IMMR + 0x4500),
-	             CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+	NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+	             CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
 	puts("NAND boot... ");
 	init_timebase();
 	initdram(0);
-	relocate_code(CFG_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
-	              CFG_NAND_U_BOOT_RELOC);
+	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+	              CONFIG_SYS_NAND_U_BOOT_RELOC);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)
@@ -155,8 +155,8 @@ void putc(char c)
 		return;
 
 	if (c == '\n')
-		NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), '\r');
+		NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
 
-	NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), c);
+	NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
 }
 #endif
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 3a6347f..cb13829 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -35,7 +35,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 static void resume_from_sleep(void)
 {
 	u32 magic = *(u32 *)0;
@@ -58,15 +58,15 @@ static void resume_from_sleep(void)
  */
 static long fixed_sdram(void)
 {
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 
 	/*
 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
@@ -75,29 +75,29 @@ static long fixed_sdram(void)
 	udelay(50000);
 
 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
 
 	/* Currently we use only one CS, so disable the other bank. */
 	im->ddr.cs_config[1] = 0;
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI;
+		im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG | SDRAM_CFG_BI;
 	else
 #endif
-		im->ddr.sdram_cfg = CFG_SDRAM_CFG;
+		im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG;
 
-	im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE_2;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE_2;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 
 	/* enable DDR controller */
@@ -109,8 +109,8 @@ static long fixed_sdram(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc = &im->lbus;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &im->lbus;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
@@ -120,11 +120,11 @@ phys_size_t initdram(int board_type)
 	msize = fixed_sdram();
 
 	/* Local Bus setup lbcr and mrtpr */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	sync();
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		resume_from_sleep();
 #endif
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
index 3eecee2..ea4b04f 100644
--- a/board/freescale/mpc8315erdb/mpc8315erdb.c
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -29,12 +29,13 @@
 #include <fdt_support.h>
 #include <pci.h>
 #include <mpc83xx.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
@@ -47,7 +48,7 @@ static u8 read_board_info(void)
 	u8 val8;
 	i2c_set_bus_num(0);
 
-	if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
+	if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
 		return val8;
 	else
 		return 0;
@@ -75,28 +76,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -108,10 +109,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
@@ -165,3 +166,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_tsec1_fixup(blob, bd);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Initialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
index 07e6486..ead7b1e 100644
--- a/board/freescale/mpc8315erdb/sdram.c
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -56,13 +56,13 @@ static void resume_from_sleep(void)
  */
 static long fixed_sdram(void)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE  & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 
 	/*
 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
@@ -71,27 +71,27 @@ static long fixed_sdram(void)
 	udelay(50000);
 
 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 
 	/* Currently we use only one CS, so disable the other bank. */
 	im->ddr.cs_config[1] = 0;
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG | SDRAM_CFG_BI;
+		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI;
 	else
-		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
 
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 
 	/* enable DDR controller */
@@ -103,7 +103,7 @@ static long fixed_sdram(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
index f5220ab..8680a19 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -75,14 +75,14 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 
 	msize = fixed_sdram();
 
@@ -95,12 +95,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -109,18 +109,18 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__ ("sync");
 	udelay(200);
 
@@ -137,28 +137,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -167,10 +167,10 @@ void pci_init_board(void)
 	clk->occr |= 0xe0000000;
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
@@ -186,7 +186,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 
-#if defined(CFG_I2C_MAC_OFFSET)
+#if defined(CONFIG_SYS_I2C_MAC_OFFSET)
 int mac_read_from_eeprom(void)
 {
 	uchar buf[28];
@@ -196,9 +196,9 @@ int mac_read_from_eeprom(void)
 	unsigned char enetvar[32];
 
 	/* Read MAC addresses from EEPROM */
-	if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) {
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) {
 		printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
-		       CFG_I2C_EEPROM_ADDR);
+		       CONFIG_SYS_I2C_EEPROM_ADDR);
 	} else {
 		if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
 			printf("Reading MAC from EEPROM\n");
diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c
index 4ad6e9d..d4d4479 100644
--- a/board/freescale/mpc832xemds/mpc832xemds.c
+++ b/board/freescale/mpc832xemds/mpc832xemds.c
@@ -76,7 +76,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 
 int board_early_init_f(void)
 {
-	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+	volatile u8 *bcsr = (volatile u8 *)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[9] &= ~0x08;
@@ -96,14 +96,14 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 
 	msize = fixed_sdram();
 
@@ -116,12 +116,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -130,21 +130,21 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 128)
+#if (CONFIG_SYS_DDR_SIZE != 128)
 #warning Currenly any ddr size other than 128 is not supported
 #endif
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__ ("sync");
 	udelay(200);
 
diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c
index b030422..2a48dd2 100644
--- a/board/freescale/mpc832xemds/pci.c
+++ b/board/freescale/mpc832xemds/pci.c
@@ -67,7 +67,7 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
 	pci_ctrl = immr->pci_ctrl;
@@ -93,7 +93,7 @@ void pci_init_board(void)
 	hose[0].first_busno = 0;
 	hose[0].last_busno = 0xff;
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 	reg16 = 0xff;
 
 	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
@@ -134,7 +134,7 @@ void pci_init_board(void)
 	u32 val32;
 	u32 dev;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -161,10 +161,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
 
 	/*
@@ -172,26 +172,26 @@ void pci_init_board(void)
 	 */
 
 	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr =
 	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI mmio - non-prefetch mem space */
-	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI IO space */
-	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/*
 	 * Configure PCI Inbound Translation Windows
 	 */
-	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
-	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
 	pci_ctrl[0].piebar1 = 0x0;
 	pci_ctrl[0].piwar1 =
 	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
@@ -209,31 +209,31 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose[0].regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI_MEM_BASE,
+		       CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose[0].regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MMIO_BASE,
+		       CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose[0].regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BASE,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose[0].regions + 3,
-		       CFG_PCI_SLV_MEM_LOCAL,
-		       CFG_PCI_SLV_MEM_BUS,
-		       CFG_PCI_SLV_MEM_SIZE,
+		       CONFIG_SYS_PCI_SLV_MEM_LOCAL,
+		       CONFIG_SYS_PCI_SLV_MEM_BUS,
+		       CONFIG_SYS_PCI_SLV_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose[0].region_count = 4;
 
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 4c04f2c..06064d9 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -44,12 +44,12 @@ void ddr_enable_ecc(unsigned int dram_size);
 
 int board_early_init_f (void)
 {
-	volatile u8* bcsr = (volatile u8*)CFG_BCSR;
+	volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[1] &= ~0x01;
 
-#ifdef CFG_USE_MPC834XSYS_USB_PHY
+#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
 	/* Use USB PHY on SYS board */
 	bcsr[5] |= 0x02;
 #endif
@@ -61,14 +61,14 @@ int board_early_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
 	msize = spd_sdram();
 #else
@@ -96,12 +96,12 @@ phys_size_t initdram (int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1);
 	     ddr_size = ddr_size>>1, ddr_size_log2++) {
@@ -109,36 +109,36 @@ int fixed_sdram(void)
 			return -1;
 		}
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currenly any ddr size other than 256 is not supported
 #endif
 #ifdef CONFIG_DDR_II
-	im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
-	im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
+	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 #else
 	im->ddr.csbnds[2].csbnds = 0x0000000f;
-	im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
 
 	/* currently we use only one CS, so disable the other banks */
 	im->ddr.cs_config[0] = 0;
 	im->ddr.cs_config[1] = 0;
 	im->ddr.cs_config[3] = 0;
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
 
 	im->ddr.sdram_cfg =
 		SDRAM_CFG_SREN
@@ -150,9 +150,9 @@ int fixed_sdram(void)
 	/* for 32-bit mode burst length is 8 */
 	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
 #endif
-	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 #endif
 	udelay(200);
 
@@ -160,7 +160,7 @@ int fixed_sdram(void)
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	return msize;
 }
-#endif/*!CFG_SPD_EEPROM*/
+#endif/*!CONFIG_SYS_SPD_EEPROM*/
 
 
 int checkboard (void)
@@ -181,41 +181,41 @@ int checkboard (void)
 /*
  * if MPC8349EMDS is soldered with SDRAM
  */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
+#if defined(CONFIG_SYS_BR2_PRELIM)  \
+	&& defined(CONFIG_SYS_OR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 
 void sdram_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc= &immap->lbus;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &immap->lbus;
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	/*
 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 	 */
 
 	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller Machine Mode Register.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 
-	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
 	asm("sync");
 	/*1 times*/
 	*sdram_addr = 0xff;
@@ -243,12 +243,12 @@ void sdram_init(void)
 	udelay(100);
 
 	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
@@ -273,14 +273,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 
 void spi_cs_activate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat &= ~SPI_CS_MASK;
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat |=  SPI_CS_MASK;
 }
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
index 9c19e30..ad7bf5d 100644
--- a/board/freescale/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@@ -33,21 +33,21 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct pci_region pci1_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 };
@@ -55,21 +55,21 @@ static struct pci_region pci1_regions[] = {
 #ifdef CONFIG_MPC83XX_PCI2
 static struct pci_region pci2_regions[] = {
 	{
-		bus_start: CFG_PCI2_MEM_BASE,
-		phys_start: CFG_PCI2_MEM_PHYS,
-		size: CFG_PCI2_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI2_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
+		size: CONFIG_SYS_PCI2_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI2_IO_BASE,
-		phys_start: CFG_PCI2_IO_PHYS,
-		size: CFG_PCI2_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI2_IO_BASE,
+		phys_start: CONFIG_SYS_PCI2_IO_PHYS,
+		size: CONFIG_SYS_PCI2_IO_SIZE,
 		flags: PCI_REGION_IO
 	},
 	{
-		bus_start: CFG_PCI2_MMIO_BASE,
-		phys_start: CFG_PCI2_MMIO_PHYS,
-		size: CFG_PCI2_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
+		size: CONFIG_SYS_PCI2_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 };
@@ -135,7 +135,7 @@ void pib_init(void)
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 #ifndef CONFIG_MPC83XX_PCI2
@@ -152,10 +152,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
 
 	udelay(2000);
@@ -170,7 +170,7 @@ void pci_init_board(void)
 #else
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0];
@@ -181,10 +181,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
 
 	udelay(2000);
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index d3fc560..35285b4 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -42,11 +42,11 @@
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 ddr_size;		/* The size of RAM, in bytes */
 	u32 ddr_size_log2 = 0;
 
-	for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
+	for (ddr_size = CONFIG_SYS_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
 		if (ddr_size & 1) {
 			return -1;
 		}
@@ -55,11 +55,11 @@ int fixed_sdram(void)
 
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 
 	/* Only one CS0 for DDR */
 	im->ddr.csbnds[0].csbnds = 0x0000000f;
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
 
 	debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
 	debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
@@ -67,15 +67,15 @@ int fixed_sdram(void)
 	debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
 	debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
 	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
 	im->ddr.sdram_mode =
 	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
 	im->ddr.sdram_interval =
 	    (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
 						       SDRAM_INTERVAL_BSTOPRE_SHIFT);
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 
 	udelay(200);
 
@@ -87,7 +87,7 @@ int fixed_sdram(void)
 	debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
 	debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
 
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
 #endif
 
@@ -130,7 +130,7 @@ volatile static struct pci_controller hose[] = {
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 #ifdef CONFIG_DDR_ECC
 	volatile ddr83xx_t *ddr = &im->ddr;
@@ -140,7 +140,7 @@ phys_size_t initdram(int board_type)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #ifdef CONFIG_SPD_EEPROM
 	msize = spd_sdram();
 #else
@@ -196,7 +196,7 @@ int misc_init_f(void)
 	   don't enable compact flash for U-Boot.
 	 */
 
-	vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
+	vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0);
 	*vsc7385_cpuctrl |= 0x0c;
 #endif
 
@@ -220,11 +220,11 @@ int misc_init_f(void)
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
 	};
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbus = &immap->lbus;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbus = &immap->lbus;
 
-	lbus->bank[3].br = CFG_BR3_PRELIM;
-	lbus->bank[3].or = CFG_OR3_PRELIM;
+	lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM;
+	lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM;
 
 	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
 	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
@@ -265,26 +265,26 @@ int misc_init_r(void)
 	unsigned int orig_bus = i2c_get_bus_num();
 	u8 i2c_data;
 
-#ifdef CFG_I2C_RTC_ADDR
+#ifdef CONFIG_SYS_I2C_RTC_ADDR
 	u8 ds1339_data[17];
 #endif
 
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	static u8 eeprom_data[] =	/* HRCW data */
 	{
 		0xAA, 0x55, 0xAA,       /* Preamble */
 		0x7C,		        /* ACS=0, BYTE_EN=1111, CONT=1 */
 		0x02, 0x40,	        /* RCWL ADDR=0x0_0900 */
-		(CFG_HRCW_LOW >> 24) & 0xFF,
-		(CFG_HRCW_LOW >> 16) & 0xFF,
-		(CFG_HRCW_LOW >> 8) & 0xFF,
-		CFG_HRCW_LOW & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 24) & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 16) & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 8) & 0xFF,
+		CONFIG_SYS_HRCW_LOW & 0xFF,
 		0x7C,		        /* ACS=0, BYTE_EN=1111, CONT=1 */
 		0x02, 0x41,	        /* RCWH ADDR=0x0_0904 */
-		(CFG_HRCW_HIGH >> 24) & 0xFF,
-		(CFG_HRCW_HIGH >> 16) & 0xFF,
-		(CFG_HRCW_HIGH >> 8) & 0xFF,
-		CFG_HRCW_HIGH & 0xFF
+		(CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF,
+		(CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF,
+		(CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF,
+		CONFIG_SYS_HRCW_HIGH & 0xFF
 	};
 
 	u8 data[sizeof(eeprom_data)];
@@ -292,22 +292,22 @@ int misc_init_r(void)
 
 	printf("Board revision: ");
 	i2c_set_bus_num(1);
-	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+	if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 		printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
-	else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+	else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 		printf("%u.%u (PCF8475)\n",  (i2c_data & 0x02) >> 1, i2c_data & 0x01);
 	else {
 		printf("Unknown\n");
 		rc = 1;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	i2c_set_bus_num(0);
 
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
 		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
 			if (i2c_write
-			    (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
+			    (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
 			     sizeof(eeprom_data)) != 0) {
 				puts("Failure writing the HRCW to EEPROM via I2C.\n");
 				rc = 1;
@@ -319,10 +319,10 @@ int misc_init_r(void)
 	}
 #endif
 
-#ifdef CFG_I2C_RTC_ADDR
+#ifdef CONFIG_SYS_I2C_RTC_ADDR
 	i2c_set_bus_num(1);
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
 	    == 0) {
 
 		/* Work-around for MPC8349E-mITX bug #13601.
@@ -366,7 +366,7 @@ int misc_init_r(void)
 		 */
 
 		if (i2c_write
-		    (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
+		    (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data,
 		     sizeof(ds1339_data))) {
 			puts("Failure writing to the RTC via I2C.\n");
 			rc = 1;
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index d33edf3..fd2c172 100644
--- a/board/freescale/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -37,8 +37,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc8349itx_config_table[] = {
@@ -92,7 +92,7 @@ void pci_init_board(void)
 	u32 dev;
 	struct pci_controller *hose;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -111,8 +111,8 @@ void pci_init_board(void)
 #ifdef CONFIG_HARD_I2C
 	i2c_set_bus_num(1);
 	/* Read the PCI_M66EN jumper setting */
-	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
-	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
+	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
+	    (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
 		if (reg8 & I2C_8574_PCI66)
 			clk->occr = 0xff000000;	/* 66 MHz PCI */
 		else
@@ -150,10 +150,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
 
 	/*
@@ -161,18 +161,18 @@ void pci_init_board(void)
 	 */
 
 	/* PCI1 mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;
 
 	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
 
 	/* PCI1 mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
 
 	/*
@@ -192,19 +192,19 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_PHYS,
+		       CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_MMIO_BASE,
-		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI1_MMIO_BASE,
+		       CONFIG_SYS_PCI1_MMIO_PHYS, CONFIG_SYS_PCI1_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose->regions + 3,
@@ -215,7 +215,7 @@ void pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
@@ -251,18 +251,18 @@ void pci_init_board(void)
 	 */
 
 	/* PCI2 mem space - prefetch */
-	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[3].potar = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[3].pobar = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;
 
 	/* PCI2 IO space */
-	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[4].potar = (CONFIG_SYS_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[4].pobar = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;
 
 	/* PCI2 mmio - non-prefetch mem space */
-	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[5].potar = (CONFIG_SYS_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[5].pobar = (CONFIG_SYS_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;
 
 	/*
@@ -283,19 +283,19 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MMIO_BASE,
-		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI2_MMIO_BASE,
+		       CONFIG_SYS_PCI2_MMIO_PHYS, CONFIG_SYS_PCI2_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose->regions + 3,
@@ -306,7 +306,7 @@ void pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));
+			   (CONFIG_SYS_IMMR + 0x8380), (CONFIG_SYS_IMMR + 0x8384));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 5c3b5db..85c0120 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -92,8 +92,8 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 int board_early_init_f(void)
 {
 
-	u8 *bcsr = (u8 *)CFG_BCSR;
-	const immap_t *immr = (immap_t *)CFG_IMMR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
+	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	/* Enable flash write */
 	bcsr[0xa] &= ~0x04;
@@ -120,18 +120,18 @@ int board_early_init_r(void)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 int fixed_sdram(void);
-void sdram_init(void);
+static int sdram_init(unsigned int base);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
 	msize = spd_sdram();
 #else
@@ -147,7 +147,7 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Initialize SDRAM if it is on local bus.
 	 */
-	sdram_init();
+	msize += sdram_init(msize * 1024 * 1024);
 
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
@@ -159,12 +159,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -173,42 +173,42 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currenly any ddr size other than 256 is not supported
 #endif
 #ifdef CONFIG_DDR_II
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 #else
 	im->ddr.csbnds[0].csbnds = 0x00000007;
 	im->ddr.csbnds[1].csbnds = 0x0008000f;
 
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
-	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
+	im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG;
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 #endif
 	udelay(200);
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 
 	return msize;
 }
-#endif				/*!CFG_SPD_EEPROM */
+#endif				/*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -219,34 +219,43 @@ int checkboard(void)
 /*
  * if MPC8360EMDS is soldered with SDRAM
  */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
+#ifdef CONFIG_SYS_LB_SDRAM
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 
-void sdram_init(void)
+static int sdram_init(unsigned int base)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbc = &immap->lbus;
-	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &immap->lbus;
+	const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
+	int rem = base % sdram_size;
+	uint *sdram_addr;
 
+	/* window base address should be aligned to the window size */
+	if (rem)
+		base = base - rem + sdram_size;
+
+	sdram_addr = (uint *)base;
 	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+	 * Setup SDRAM Base and Option Registers
 	 */
+	immap->lbus.bank[2].br = base | CONFIG_SYS_BR2;
+	immap->lbus.bank[2].or = CONFIG_SYS_OR2;
+	immap->sysconf.lblaw[2].bar = base;
+	immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
+
 	/*setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller Machine Mode Register.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* Normal Operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;	/* Precharge All Banks */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;	/* Normal Operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;	/* Precharge All Banks */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
@@ -254,7 +263,7 @@ void sdram_init(void)
 	/*
 	 * We need do 8 times auto refresh operation.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;	/* 1 times */
 	udelay(100);
@@ -274,27 +283,33 @@ void sdram_init(void)
 	udelay(100);
 
 	/* Mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*(sdram_addr + 0xcc) = 0xff;
 	udelay(100);
 
 	/* Normal operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
+
+	/*
+	 * In non-aligned case we don't [normally] use that memory because
+	 * there is a hole.
+	 */
+	if (rem)
+		return 0;
+	return CONFIG_SYS_LBC_SDRAM_SIZE;
 }
 #else
-void sdram_init(void)
-{
-}
+static int sdram_init(unsigned int base) { return 0; }
 #endif
 
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	const immap_t *immr = (immap_t *)CFG_IMMR;
+	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c
index 4a0d460..935aca26 100644
--- a/board/freescale/mpc8360emds/pci.c
+++ b/board/freescale/mpc8360emds/pci.c
@@ -67,7 +67,7 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
 	pci_ctrl = immr->pci_ctrl;
@@ -93,7 +93,7 @@ void pci_init_board(void)
 	hose[0].first_busno = 0;
 	hose[0].last_busno = 0xff;
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 	reg16 = 0xff;
 
 	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
@@ -134,7 +134,7 @@ void pci_init_board(void)
 	u32 val32;
 	u32 dev;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -161,10 +161,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
 
 	/*
@@ -172,26 +172,26 @@ void pci_init_board(void)
 	 */
 
 	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr =
 	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI mmio - non-prefetch mem space */
-	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI IO space */
-	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/*
 	 * Configure PCI Inbound Translation Windows
 	 */
-	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
-	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
 	pci_ctrl[0].piebar1 = 0x0;
 	pci_ctrl[0].piwar1 =
 	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
@@ -209,31 +209,31 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose[0].regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI_MEM_BASE,
+		       CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose[0].regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MMIO_BASE,
+		       CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose[0].regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BASE,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose[0].regions + 3,
-		       CFG_PCI_SLV_MEM_LOCAL,
-		       CFG_PCI_SLV_MEM_BUS,
-		       CFG_PCI_SLV_MEM_SIZE,
+		       CONFIG_SYS_PCI_SLV_MEM_LOCAL,
+		       CONFIG_SYS_PCI_SLV_MEM_BUS,
+		       CONFIG_SYS_PCI_SLV_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose[0].region_count = 4;
 
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c
index 61d7000..af3b8ce 100644
--- a/board/freescale/mpc8360erdk/mpc8360erdk.c
+++ b/board/freescale/mpc8360erdk/mpc8360erdk.c
@@ -214,7 +214,7 @@ int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-	void *reg = (void *)(CFG_IMMR + 0x14a8);
+	void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
 	u32 val;
 
 	/*
@@ -233,12 +233,12 @@ int board_early_init_r(void)
 
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1)
@@ -248,18 +248,18 @@ int fixed_sdram(void)
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 	udelay(200);
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 
@@ -271,14 +271,14 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 	extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 	msize = fixed_sdram();
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
@@ -300,28 +300,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		.bus_start = CFG_PCI1_MEM_BASE,
-		.phys_start = CFG_PCI1_MEM_PHYS,
-		.size = CFG_PCI1_MEM_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
+		.size = CONFIG_SYS_PCI1_MEM_SIZE,
 		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH,
 	},
 	{
-		.bus_start = CFG_PCI1_MMIO_BASE,
-		.phys_start = CFG_PCI1_MMIO_PHYS,
-		.size = CFG_PCI1_MMIO_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
+		.size = CONFIG_SYS_PCI1_MMIO_SIZE,
 		.flags = PCI_REGION_MEM,
 	},
 	{
-		.bus_start = CFG_PCI1_IO_BASE,
-		.phys_start = CFG_PCI1_IO_PHYS,
-		.size = CFG_PCI1_IO_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_IO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_IO_PHYS,
+		.size = CONFIG_SYS_PCI1_IO_SIZE,
 		.flags = PCI_REGION_IO,
 	},
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions, };
@@ -338,10 +338,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
index 8b44a0f..8e22e13 100644
--- a/board/freescale/mpc8360erdk/nand.c
+++ b/board/freescale/mpc8360erdk/nand.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/fsl_upm.h>
 #include <nand.h>
 
-static struct immap *im = (struct immap *)CFG_IMMR;
+static struct immap *im = (struct immap *)CONFIG_SYS_IMMR;
 
 static const u32 upm_array[] = {
 	0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words  0 to  3 */
@@ -70,7 +70,7 @@ static int dev_ready(void)
 
 static struct fsl_upm_nand fun = {
 	.upm = {
-		.io_addr = (void *)CFG_NAND_BASE,
+		.io_addr = (void *)CONFIG_SYS_NAND_BASE,
 	},
 	.width = 8,
 	.upm_cmd_offset = 8,
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 40f1e63..acf8ada 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -15,16 +15,14 @@
 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
-#if defined(CONFIG_OF_LIBFDT)
+#include <tsec.h>
 #include <libfdt.h>
-#endif
-#if defined(CONFIG_PQ_MDS_PIB)
+#include <fdt_support.h>
 #include "../common/pq-mds-pib.h"
-#endif
 
 int board_early_init_f(void)
 {
-	u8 *bcsr = (u8 *)CFG_BCSR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[0x9] &= ~0x04;
@@ -32,7 +30,7 @@ int board_early_init_f(void)
 	bcsr[0xe] = 0xff;
 
 #ifdef CONFIG_FSL_SERDES
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -44,7 +42,9 @@ int board_early_init_f(void)
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8378:
-		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII,
+				 FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
+		fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8379:
@@ -62,6 +62,125 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2)
+int board_eth_init(bd_t *bd)
+{
+	struct tsec_info_struct tsec_info[2];
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	u32 rcwh = in_be32(&im->reset.rcwh);
+	u32 tsec_mode;
+	int num = 0;
+
+	/* New line after Net: */
+	printf("\n");
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+
+	printf(CONFIG_TSEC1_NAME ": ");
+
+	tsec_mode = rcwh & HRCWH_TSEC1M_MASK;
+	if (tsec_mode == HRCWH_TSEC1M_IN_RGMII) {
+		printf("RGMII\n");
+		/* this is default, no need to fixup */
+	} else if (tsec_mode == HRCWH_TSEC1M_IN_SGMII) {
+		printf("SGMII\n");
+		tsec_info[num].phyaddr = TSEC1_PHY_ADDR_SGMII;
+		tsec_info[num].flags = TSEC_GIGABIT;
+	} else {
+		printf("unsupported PHY type\n");
+	}
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+
+	printf(CONFIG_TSEC2_NAME ": ");
+
+	tsec_mode = rcwh & HRCWH_TSEC2M_MASK;
+	if (tsec_mode == HRCWH_TSEC2M_IN_RGMII) {
+		printf("RGMII\n");
+		/* this is default, no need to fixup */
+	} else if (tsec_mode == HRCWH_TSEC2M_IN_SGMII) {
+		printf("SGMII\n");
+		tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
+		tsec_info[num].flags = TSEC_GIGABIT;
+	} else {
+		printf("unsupported PHY type\n");
+	}
+	num++;
+#endif
+	return tsec_eth_init(bd, tsec_info, num);
+}
+
+static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
+			    int phy_addr)
+{
+	const char *phy_type = "sgmii";
+	const u32 *ph;
+	int off;
+	int err;
+
+	off = fdt_path_offset(blob, alias);
+	if (off < 0) {
+		printf("WARNING: could not find %s alias: %s.\n", alias,
+			fdt_strerror(off));
+		return;
+	}
+
+	err = fdt_setprop(blob, off, "phy-connection-type", phy_type,
+			  strlen(phy_type) + 1);
+	if (err) {
+		printf("WARNING: could not set phy-connection-type for %s: "
+			"%s.\n", alias, fdt_strerror(err));
+		return;
+	}
+
+	ph = (u32 *)fdt_getprop(blob, off, "phy-handle", 0);
+	if (!ph) {
+		printf("WARNING: could not get phy-handle for %s.\n",
+			alias);
+		return;
+	}
+
+	off = fdt_node_offset_by_phandle(blob, *ph);
+	if (off < 0) {
+		printf("WARNING: could not get phy node for %s: %s\n", alias,
+			fdt_strerror(off));
+		return;
+	}
+
+	phy_addr = cpu_to_fdt32(phy_addr);
+	err = fdt_setprop(blob, off, "reg", &phy_addr, sizeof(phy_addr));
+	if (err < 0) {
+		printf("WARNING: could not set phy node's reg for %s: "
+			"%s.\n", alias, fdt_strerror(err));
+		return;
+	}
+}
+
+static void ft_tsec_fixup(void *blob, bd_t *bd)
+{
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	u32 rcwh = in_be32(&im->reset.rcwh);
+	u32 tsec_mode;
+
+#ifdef CONFIG_TSEC1
+	tsec_mode = rcwh & HRCWH_TSEC1M_MASK;
+	if (tsec_mode == HRCWH_TSEC1M_IN_SGMII)
+		__ft_tsec_fixup(blob, bd, "ethernet0", TSEC1_PHY_ADDR_SGMII);
+#endif
+
+#ifdef CONFIG_TSEC2
+	tsec_mode = rcwh & HRCWH_TSEC2M_MASK;
+	if (tsec_mode == HRCWH_TSEC2M_IN_SGMII)
+		__ft_tsec_fixup(blob, bd, "ethernet1", TSEC2_PHY_ADDR_SGMII);
+#endif
+}
+#else
+static inline void ft_tsec_fixup(void *blob, bd_t *bd) {}
+#endif /* defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2) */
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_PQ_MDS_PIB
@@ -77,7 +196,7 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
@@ -104,43 +223,43 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
-#if (CFG_DDR_SIZE != 512)
+#if (CONFIG_SYS_DDR_SIZE != 512)
 #warning Currenly any ddr size other than 512 is not supported
 #endif
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 	udelay(50000);
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 	udelay(1000);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 	udelay(1000);
 
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__("sync");
 	udelay(1000);
 
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	udelay(2000);
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
-#endif /*!CFG_SPD_EEPROM */
+#endif /*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -148,12 +267,55 @@ int checkboard(void)
 	return 0;
 }
 
+#ifdef CONFIG_PCI
+int board_pci_host_broken(void)
+{
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	const u32 rcw_mask = HRCWH_PCI1_ARBITER_ENABLE | HRCWH_PCI_HOST;
+	const char *pci_ea = getenv("pci_external_arbiter");
+
+	/* It's always OK in case of external arbiter. */
+	if (pci_ea && !strcmp(pci_ea, "yes"))
+		return 0;
+
+	if ((in_be32(&im->reset.rcwh) & rcw_mask) != rcw_mask)
+		return 1;
+
+	return 0;
+}
+
+static void ft_pci_fixup(void *blob, bd_t *bd)
+{
+	const char *status = "broken (no arbiter)";
+	int off;
+	int err;
+
+	off = fdt_path_offset(blob, "pci0");
+	if (off < 0) {
+		printf("WARNING: could not find pci0 alias: %s.\n",
+			fdt_strerror(off));
+		return;
+	}
+
+	err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+	if (err) {
+		printf("WARNING: could not set status for pci0: %s.\n",
+			fdt_strerror(err));
+		return;
+	}
+}
+#endif
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
+	ft_tsec_fixup(blob, bd);
+	fdt_fixup_dr_usb(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
+	if (board_pci_host_broken())
+		ft_pci_fixup(blob, bd);
 #endif
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index ab90979..df4e748 100644
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -21,41 +21,44 @@
 #if defined(CONFIG_PCI)
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
 
+	if (board_pci_host_broken())
+		return;
+
 	/* Enable all 5 PCI_CLK_OUTPUTS */
 	clk->occr |= 0xf8000000;
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	udelay(2000);
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index aaefc18..318a3dc 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -20,17 +20,17 @@
 #include <spd_sdram.h>
 #include <vsc7385.h>
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int
 testdram(void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
+	       CONFIG_SYS_MEMTEST_START,
+	       CONFIG_SYS_MEMTEST_END);
 
 	printf("DRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
@@ -66,7 +66,7 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	immap_t *im = (immap_t *) CFG_IMMR;
+	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
@@ -92,40 +92,40 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 	udelay(50000);
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 	udelay(1000);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 	udelay(1000);
 
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 	udelay(1000);
 
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	udelay(2000);
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
-#endif	/*!CFG_SPD_EEPROM */
+#endif	/*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -136,7 +136,7 @@ int checkboard(void)
 int board_early_init_f(void)
 {
 #ifdef CONFIG_FSL_SERDES
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -148,7 +148,7 @@ int board_early_init_f(void)
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8378:
-		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+		fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8379:
diff --git a/board/freescale/mpc837xerdb/pci.c b/board/freescale/mpc837xerdb/pci.c
index 26e7320..8bb31fc 100644
--- a/board/freescale/mpc837xerdb/pci.c
+++ b/board/freescale/mpc837xerdb/pci.c
@@ -17,28 +17,28 @@
 #if defined(CONFIG_PCI)
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -48,10 +48,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c
index 2e88c79..3135d6d 100644
--- a/board/freescale/mpc8536ds/ddr.c
+++ b/board/freescale/mpc8536ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c
index cdf5215..0861fa7 100644
--- a/board/freescale/mpc8536ds/law.c
+++ b/board/freescale/mpc8536ds/law.c
@@ -28,16 +28,17 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 8216c70..2b17612 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -25,6 +25,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/immap_fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
@@ -34,12 +35,11 @@
 #include <libfdt.h>
 #include <spd_sdram.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 phys_size_t fixed_sdram(void);
 
@@ -61,20 +61,12 @@ initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -86,34 +78,34 @@ initdram(int board_type)
 
 phys_size_t fixed_sdram (void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
 	uint d_init;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
 
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 
 #if defined (CONFIG_DDR_ECC)
-	ddr->err_int_en = CFG_DDR_ERR_INT_EN;
-	ddr->err_disable = CFG_DDR_ERR_DIS;
-	ddr->err_sbe = CFG_DDR_SBE;
+	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 #endif
 	asm("sync;isync");
 
 	udelay(500);
 
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
@@ -151,12 +143,15 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint sdrs2_io_sel =
 		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
@@ -176,11 +171,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
 	int pcie_configured  = (io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE3 connected to Slot3 as %s (base address %x)",
@@ -193,27 +188,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE3_MEM_BASE,
-			       CFG_PCIE3_MEM_PHYS,
-			       CFG_PCIE3_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_PHYS,
+			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE3_IO_BASE,
-			       CFG_PCIE3_IO_PHYS,
-			       CFG_PCIE3_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_PHYS,
+			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -234,12 +225,12 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = (io_sel == 2 || io_sel == 3
 				|| io_sel == 5 || io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to Slot1 as %s (base address %x)",
@@ -252,36 +243,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE1_MEM_BASE2,
-			       CFG_PCIE1_MEM_PHYS2,
-			       CFG_PCIE1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_PHYS2,
+			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -303,11 +289,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
 	int pcie_configured  = (io_sel == 5 || io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE2 connected to Slot 2 as %s (base address %x)",
@@ -320,36 +306,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE2_MEM_BASE,
-			       CFG_PCIE2_MEM_PHYS,
-			       CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_PHYS,
+			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE2_IO_BASE,
-			       CFG_PCIE2_IO_PHYS,
-			       CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_PHYS,
+			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE2_MEM_BASE2,
-			       CFG_PCIE2_MEM_PHYS2,
-			       CFG_PCIE2_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_PHYS2,
+			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -370,9 +351,9 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
@@ -393,35 +374,31 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
-#ifdef CFG_PCI1_MEM_BASE2
+
+#ifdef CONFIG_SYS_PCI1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCI1_MEM_BASE2,
-			       CFG_PCI1_MEM_PHYS2,
-			       CFG_PCI1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE2,
+			       CONFIG_SYS_PCI1_MEM_PHYS2,
+			       CONFIG_SYS_PCI1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -441,8 +418,7 @@ pci_init_board(void)
 
 int board_early_init_r(void)
 {
-	unsigned int i;
-	const unsigned int flashbase = CFG_FLASH_BASE;
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = 1;
 
 	/*
@@ -450,11 +426,9 @@ int board_early_init_r(void)
 	 * so that flash can be erased properly.
 	 */
 
-	/* Invalidate any remaining lines of the flash from caches. */
-	for (i = 0; i < 256*1024*1024; i+=32) {
-		asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
-		asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
-	}
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
 
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
@@ -608,46 +582,75 @@ get_board_ddr_clk(ulong dummy)
 }
 #endif
 
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int is_sata_supported(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint sdrs2_io_sel =
+		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
+	if (sdrs2_io_sel & 0x04)
+		return 0;
+
+	return 1;
+}
+
+int board_eth_init(bd_t *bis)
 {
-	int node, tmp[2];
-	const char *path;
+#ifdef CONFIG_TSEC_ENET
+	struct tsec_info_struct tsec_info[2];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int num = 0;
+	uint sdrs2_io_sel =
+		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
 
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+		tsec_info[num].phyaddr = 0;
+		tsec_info[num].flags |= TSEC_SGMII;
+	}
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (sdrs2_io_sel == 4) {
+		tsec_info[num].phyaddr = 1;
+		tsec_info[num].flags |= TSEC_SGMII;
+	}
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+		return 0;
+	}
+
+	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+		fsl_sgmii_riser_init(tsec_info, num);
+
+	tsec_eth_init(bis, tsec_info, num);
+#endif
+	return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
-#ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
-#ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci3", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c
index 28a9fa8..c81a959 100644
--- a/board/freescale/mpc8536ds/tlb.c
+++ b/board/freescale/mpc8536ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -47,25 +47,30 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/* TLB 1 */
 	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_1M, 1),
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256K, 1),
+
+	/* *I*G - NAND */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_1M, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c
index 45372f4..7850794 100644
--- a/board/freescale/mpc8540ads/ddr.c
+++ b/board/freescale/mpc8540ads/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
index 3b8bd05..7dd8f29 100644
--- a/board/freescale/mpc8540ads/law.c
+++ b/board/freescale/mpc8540ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 005e4d9..a0b6fbd 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -71,7 +71,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -116,8 +116,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -127,8 +127,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -137,10 +137,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -155,7 +155,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -176,52 +176,52 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -234,15 +234,15 @@ sdram_init(void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -251,14 +251,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index 4fe2862..2ec3ccc 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	16K	Non-cacheable, guarded
 	 * 0xf8000000	16K	BCSR registers
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
@@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 #error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 8, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 9, BOOKE_PAGESZ_64M, 1),
 #endif
diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c
index 11ce57d..c84a6cb 100644
--- a/board/freescale/mpc8541cds/ddr.c
+++ b/board/freescale/mpc8541cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c
index fbf2bdc..8e3de22 100644
--- a/board/freescale/mpc8541cds/law.c
+++ b/board/freescale/mpc8541cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index de3a791..7e40c5c 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -200,7 +200,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -258,7 +258,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -290,8 +290,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -337,56 +337,56 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * Determine which address lines to use baed on CPU board rev.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 	} else {
 		/*
 		 * Assume something unable to identify itself is
 		 * really old, and likely has lines 16/17 mapped.
 		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	}
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -396,7 +396,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -406,7 +406,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -415,7 +415,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c
index c5434a0..bf957c0 100644
--- a/board/freescale/mpc8541cds/tlb.c
+++ b/board/freescale/mpc8541cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	16M	PCI1 IO
 	 * 0xe300_0000	16M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c
index bbb5ee2..34f84a2 100644
--- a/board/freescale/mpc8544ds/ddr.c
+++ b/board/freescale/mpc8544ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
index 54cf36b..317ba26 100644
--- a/board/freescale/mpc8544ds/law.c
+++ b/board/freescale/mpc8544ds/law.c
@@ -28,15 +28,15 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
 	/* contains both PCIE3 MEM & IO space */
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 4e976b7..14581ab 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -32,18 +32,17 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
 		printf("immap size error %lx\n",(ulong)&gur->porpllsr);
@@ -74,12 +73,6 @@ initdram(int board_type)
 
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -100,12 +93,15 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -122,11 +118,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
 	int pcie_configured  = io_sel >= 1;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
@@ -139,36 +135,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE3_MEM_BASE,
-			       CFG_PCIE3_MEM_PHYS,
-			       CFG_PCIE3_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_PHYS,
+			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE3_IO_BASE,
-			       CFG_PCIE3_IO_PHYS,
-			       CFG_PCIE3_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_PHYS,
+			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE3_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE3_MEM_BASE2,
-			       CFG_PCIE3_MEM_PHYS2,
-			       CFG_PCIE3_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_PHYS2,
+			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -182,7 +173,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((u32 *)CFG_PCIE3_MEM_BASE);
+		in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BASE);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}
@@ -194,11 +185,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = io_sel & 6;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to Slot2 as %s (base address %x)",
@@ -211,36 +202,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE1_MEM_BASE2,
-			       CFG_PCIE1_MEM_PHYS2,
-			       CFG_PCIE1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_PHYS2,
+			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -262,11 +248,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
 	int pcie_configured  = io_sel & 4;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
@@ -279,36 +265,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE2_MEM_BASE,
-			       CFG_PCIE2_MEM_PHYS,
-			       CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_PHYS,
+			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE2_IO_BASE,
-			       CFG_PCIE2_IO_PHYS,
-			       CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_PHYS,
+			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE2_MEM_BASE2,
-			       CFG_PCIE2_MEM_PHYS2,
-			       CFG_PCIE2_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_PHYS2,
+			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -329,9 +310,9 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
@@ -352,35 +333,31 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
-#ifdef CFG_PCIE3_MEM_BASE2
+
+#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE3_MEM_BASE2,
-			       CFG_PCIE3_MEM_PHYS2,
-			       CFG_PCIE3_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_PHYS2,
+			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -463,47 +440,62 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+	struct tsec_info_struct tsec_info[2];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+
+		return 0;
+	}
+
+	if (io_sel & 1)
+		fsl_sgmii_riser_init(tsec_info, num);
+
+
+	tsec_eth_init(bis, tsec_info, num);
+#endif
+	return pci_eth_init(bis);
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-void
-ft_board_setup(void *blob, bd_t *bd)
+void ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
+
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
 #endif
 #ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci3", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c
index 40e0499..c7442b2 100644
--- a/board/freescale/mpc8544ds/tlb.c
+++ b/board/freescale/mpc8544ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 	/*
@@ -45,28 +45,28 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xfc000000	64M	Covers FLASH at 0xFE800000 and 0xFF800000
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_64M, 1),
 	/*
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CFG_PCIE_PHYS, CFG_PCIE_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_PHYS, CONFIG_SYS_PCIE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS + 0x10000000, CFG_PCI_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -75,7 +75,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe100_0000	255M	PCI IO range
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
@@ -83,7 +83,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	64M	Non-cacheable, guarded
 	 * 0xf8000000	64M	PIXIS 0xF8000000 - 0xFBFFFFFF
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 };
diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c
index f07d746..ab64fa8 100644
--- a/board/freescale/mpc8548cds/ddr.c
+++ b/board/freescale/mpc8548cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
index 34b9d1c..98748aa 100644
--- a/board/freescale/mpc8548cds/law.c
+++ b/board/freescale/mpc8548cds/law.c
@@ -51,22 +51,22 @@
  */
 
 struct law_entry law_table[] = {
-#ifdef CFG_PCI1_MEM_PHYS
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+#ifdef CONFIG_SYS_PCI1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
 #endif
-#ifdef CFG_PCI2_MEM_PHYS
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+#ifdef CONFIG_SYS_PCI2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 #endif
-#ifdef CFG_PCIE1_MEM_PHYS
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 #endif
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-#ifdef CFG_RIO_MEM_PHYS
-	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_RIO_MEM_PHYS
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
 };
 
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 84d3850..c562fc9 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -38,10 +38,6 @@
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
@@ -49,14 +45,13 @@ void sdram_init(void);
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
 
 	uint cpu_board_rev = get_cpu_board_revision ();
-	uint svr;
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
 		get_board_version (), pci_slot);
@@ -69,17 +64,6 @@ int checkboard (void)
 	 */
 	local_bus_init ();
 
-	svr = get_svr();
-
-	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 * Fixed in Silicon Rev.2.1
-	 */
-	if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1))
-		ecm->eebpcr |= (1 << 16);
-
 	/*
 	 * Hack TSEC 3 and 4 IO voltages.
 	 */
@@ -106,7 +90,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -118,13 +102,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -140,8 +117,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -174,46 +151,46 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * MPC8548 uses "new" 15-16 style addressing.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -223,7 +200,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -233,7 +210,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -242,7 +219,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -285,22 +262,25 @@ static struct pci_controller pci2_hose;
 static struct pci_controller pcie1_hose;
 #endif	/* CONFIG_PCIE1 */
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	struct pci_config_table *table;
+	struct pci_region *r = hose->regions;
 
 	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
@@ -322,27 +302,22 @@ pci_init_board(void)
 
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		/* relocate config table pointers */
 		hose->config_table = \
@@ -357,7 +332,7 @@ pci_init_board(void)
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			/* PCI-X init */
 			if (CONFIG_SYS_CLK_FREQ < 66000000)
 				printf("PCI-X will only work at 66 MHz\n");
@@ -392,10 +367,10 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -411,27 +386,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -484,29 +455,16 @@ int last_stage_init(void)
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
+void ft_pci_setup(void *blob, bd_t *bd)
+{
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
index ab99af7..eab212a 100644
--- a/board/freescale/mpc8548cds/tlb.c
+++ b/board/freescale/mpc8548cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,22 +54,22 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
-#ifdef CFG_RIO_MEM_PHYS
+#ifdef CONFIG_SYS_RIO_MEM_PHYS
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 #endif
@@ -80,7 +80,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe210_0000	1M	PCI2 IO
 	 * 0xe300_0000	1M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_CACHE_BASE, CONFIG_SYS_LBC_CACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	64M	Non-cacheable, guarded
 	 * 0xf8000000	64M	CADMUS registers, relocated L2SRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_64M, 1),
 };
diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c
index 11ce57d..c84a6cb 100644
--- a/board/freescale/mpc8555cds/ddr.c
+++ b/board/freescale/mpc8555cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c
index fbf2bdc..8e3de22 100644
--- a/board/freescale/mpc8555cds/law.c
+++ b/board/freescale/mpc8555cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 826056a..33685c1 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -198,7 +198,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -256,7 +256,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -290,8 +290,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -337,55 +337,55 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * Determine which address lines to use baed on CPU board rev.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 	} else {
 		/*
 		 * Assume something unable to identify itself is
 		 * really old, and likely has lines 16/17 mapped.
 		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	}
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -395,7 +395,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -405,7 +405,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -414,7 +414,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c
index c5434a0..bf957c0 100644
--- a/board/freescale/mpc8555cds/tlb.c
+++ b/board/freescale/mpc8555cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	16M	PCI1 IO
 	 * 0xe300_0000	16M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c
index 45372f4..7850794 100644
--- a/board/freescale/mpc8560ads/ddr.c
+++ b/board/freescale/mpc8560ads/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c
index 3b8bd05..7dd8f29 100644
--- a/board/freescale/mpc8560ads/law.c
+++ b/board/freescale/mpc8560ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 851fc57..3730818 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -217,7 +217,7 @@ typedef struct bcsr_ {
 void reset_phy (void)
 {
 #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
+	volatile bcsr_t *bcsr = (bcsr_t *) CONFIG_SYS_BCSR;
 #endif
 	/* reset Giga bit Ethernet port if needed here */
 
@@ -275,7 +275,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -320,8 +320,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -331,8 +331,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -341,10 +341,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -359,7 +359,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -380,52 +380,52 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -438,15 +438,15 @@ sdram_init(void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -455,14 +455,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index 4fe2862..2ec3ccc 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	16K	Non-cacheable, guarded
 	 * 0xf8000000	16K	BCSR registers
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
@@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 #error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 8, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 9, BOOKE_PAGESZ_64M, 1),
 #endif
diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index 791a50f..30676e1 100644
--- a/board/freescale/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
@@ -27,9 +27,9 @@
 
 void enable_8568mds_duart()
 {
-	volatile uint* duart_mux	= (uint *)(CFG_CCSRBAR + 0xe0060);
-	volatile uint* devices		= (uint *)(CFG_CCSRBAR + 0xe0070);
-	volatile u8 *bcsr		= (u8 *)(CFG_BCSR);
+	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
+	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
+	volatile u8 *bcsr		= (u8 *)(CONFIG_SYS_BCSR);
 
 	*duart_mux = 0x80000000;	/* Set the mux to Duart on PMUXCR */
 	*devices  = 0;			/* Enable all peripheral devices */
@@ -38,21 +38,21 @@ void enable_8568mds_duart()
 
 void enable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] |= 0x01;
 }
 
 void disable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] &= ~(0x01);
 }
 
 void enable_8568mds_qe_mdio()
 {
-	u8 *bcsr = (u8 *)(CFG_BCSR);
+	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[7] |= 0x01;
 }
@@ -60,7 +60,7 @@ void enable_8568mds_qe_mdio()
 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
 void reset_8568mds_uccs(void)
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	/* Turn off UCC1 & UCC2 */
 	out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c
index 1b8ecec..482fd91 100644
--- a/board/freescale/mpc8568mds/ddr.c
+++ b/board/freescale/mpc8568mds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -38,7 +39,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
index 3bc24c5..da7b6dc 100644
--- a/board/freescale/mpc8568mds/law.c
+++ b/board/freescale/mpc8568mds/law.c
@@ -50,13 +50,13 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index f9e35cc..bc93be8 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -99,11 +99,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
 };
 
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 void local_bus_init(void);
 void sdram_init(void);
 
@@ -123,10 +118,10 @@ int board_early_init_f (void)
 	enable_8568mds_qe_mdio();
 #endif
 
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	/* Enable I2C2_SCL and I2C2_SDA */
 	volatile struct par_io *port_c;
-	port_c = (struct par_io*)(CFG_IMMR + 0xe0140);
+	port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
 	port_c->cpdir2 |= 0x0f000000;
 	port_c->cppar2 &= ~0x0f000000;
 	port_c->cppar2 |= 0x0a000000;
@@ -158,7 +153,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -170,13 +165,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -192,8 +180,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -223,44 +211,44 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * MPC8568 uses "new" 15-16 style addressing.
 	 */
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -270,7 +258,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -280,7 +268,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -289,7 +277,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -323,6 +311,9 @@ static struct pci_controller pci1_hose = {
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno = 0;
 
 /*
@@ -371,7 +362,7 @@ pib_init(void)
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 
@@ -379,9 +370,9 @@ pci_init_board(void)
 {
 	pib_init();
 
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_32 = 1;      /* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* PORDEVSR[14] */
@@ -402,27 +393,23 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-				CFG_PCI1_MEM_BASE,
-				CFG_PCI1_MEM_PHYS,
-				CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_PHYS,
+				CONFIG_SYS_PCI1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-				CFG_PCI1_IO_BASE,
-				CFG_PCI1_IO_PHYS,
-				CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_PHYS,
+				CONFIG_SYS_PCI1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -440,10 +427,10 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -459,27 +446,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-				CFG_PCIE1_MEM_BASE,
-				CFG_PCIE1_MEM_PHYS,
-				CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-				CFG_PCIE1_IO_BASE,
-				CFG_PCIE1_IO_PHYS,
-				CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -500,31 +483,18 @@ pci_init_board(void)
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
+void ft_board_setup(void *blob, bd_t *bd)
+{
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
index 7565176..1077552 100644
--- a/board/freescale/mpc8568mds/tlb.c
+++ b/board/freescale/mpc8568mds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -47,7 +47,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH (upper half)
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x1000000, CFG_FLASH_BASE + 0x1000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, CONFIG_SYS_FLASH_BASE + 0x1000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -55,7 +55,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLBe 1:	16M	Non-cacheable, guarded
 	 * 0xfe000000	16M	FLASH (lower half)
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_16M, 1),
 
@@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0x80000000	512M	PCI1 MEM
 	 * 0xa0000000	512M	PCIe MEM
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
@@ -74,7 +74,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	8M	PCI1 IO
 	 * 0xe280_0000	8M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_64M, 1),
 
@@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLBe 4:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
@@ -92,7 +92,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xf8008000	32K PIB (CS4)
 	 * 0xf8010000	32K PIB (CS5)
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR_BASE, CFG_BCSR_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_256K, 1),
 };
diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c
index 5f8c555..d66ede2 100644
--- a/board/freescale/mpc8572ds/ddr.c
+++ b/board/freescale/mpc8572ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
@@ -38,40 +39,108 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+	u32 datarate_mhz_low;
+	u32 datarate_mhz_high;
+	u32 n_ranks;
+	u32 clk_adjust;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+} board_specific_parameters_t;
+
+/* ranges for parameters:
+ *  wr_data_delay = 0-6
+ *  clk adjust = 0-8
+ *  cpo 2-0x1E (30)
+ */
+
+
+/* XXX: these values need to be checked for all interleaving modes.  */
+/* XXX: No reliable dual-rank 800 MHz setting has been found.  It may
+ *      seem reliable, but errors will appear when memory intensive
+ *      program is run. */
+/* XXX: Single rank at 800 MHz is OK.  */
+const board_specific_parameters_t board_specific_parameters[][20] = {
+	{
+	/* 	memory controller 0 			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata|2T	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay|	*/
+		{  0, 333,    2,    6,   7,    3,  0},
+		{334, 400,    2,    6,   9,    3,  0},
+		{401, 549,    2,    6,  11,    3,  0},
+		{550, 680,    2,    1,  10,    5,  0},
+		{681, 850,    2,    1,  12,    5,  1},
+		{  0, 333,    1,    6,   7,    3,  0},
+		{334, 400,    1,    6,   9,    3,  0},
+		{401, 549,    1,    6,  11,    3,  0},
+		{550, 680,    1,    1,  10,    5,  0},
+		{681, 850,    1,    1,  12,    5,  0}
+	},
+
+	{
+	/*	memory controller 1			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata|2T	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay|	*/
+		{  0, 333,    2,     6,  7,    3,  0},
+		{334, 400,    2,     6,  9,    3,  0},
+		{401, 549,    2,     6, 11,    3,  0},
+		{550, 680,    2,     1, 11,    6,  0},
+		{681, 850,    2,     1, 13,    6,  1},
+		{  0, 333,    1,     6,  7,    3,  0},
+		{334, 400,    1,     6,  9,    3,  0},
+		{401, 549,    1,     6, 11,    3,  0},
+		{550, 680,    1,     1, 11,    6,  0},
+		{681, 850,    1,     1, 13,    6,  0}
+	}
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
+	const board_specific_parameters_t *pbsp =
+				&(board_specific_parameters[ctrl_num][0]);
+	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+				sizeof(board_specific_parameters[0][0]);
+	u32 i;
+	ulong ddr_freq;
 
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
+	/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
 	 */
-	popts->cpo_override = 10;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i&1) {	/* odd CS */
+			popts->cs_local_opts[i].odt_rd_cfg = 0;
+			popts->cs_local_opts[i].odt_wr_cfg = 0;
+		} else {	/* even CS */
+			if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+				popts->cs_local_opts[i].odt_rd_cfg = 0;
+				popts->cs_local_opts[i].odt_wr_cfg = 4;
+			} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+			popts->cs_local_opts[i].odt_rd_cfg = 3;
+			popts->cs_local_opts[i].odt_wr_cfg = 3;
+			}
+		}
+	}
 
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
-	popts->write_data_delay = 5;
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	for (i = 0; i < num_params; i++) {
+		if (ddr_freq >= pbsp->datarate_mhz_low &&
+		    ddr_freq <= pbsp->datarate_mhz_high &&
+		    pdimm->n_ranks == pbsp->n_ranks) {
+			popts->clk_adjust = pbsp->clk_adjust;
+			popts->cpo_override = pbsp->cpo;
+			popts->write_data_delay = pbsp->write_data_delay;
+			popts->twoT_en = pbsp->force_2T;
+		}
+		pbsp++;
+	}
 
 	/*
 	 * Factors to consider for half-strength driver enable:
diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c
index d69b593..83eb681 100644
--- a/board/freescale/mpc8572ds/law.c
+++ b/board/freescale/mpc8572ds/law.c
@@ -28,14 +28,15 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 70b548b..a14db5a 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -25,6 +25,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/immap_fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
@@ -32,12 +33,10 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <tsec.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 long int fixed_sdram(void);
 
@@ -58,20 +57,12 @@ phys_size_t initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -83,34 +74,34 @@ phys_size_t initdram(int board_type)
 
 phys_size_t fixed_sdram (void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
 	uint d_init;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
 
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 
 #if defined (CONFIG_DDR_ECC)
-	ddr->err_int_en = CFG_DDR_ERR_INT_EN;
-	ddr->err_disable = CFG_DDR_ERR_DIS;
-	ddr->err_sbe = CFG_DDR_SBE;
+	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 #endif
 	asm("sync;isync");
 
 	udelay(500);
 
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
@@ -144,11 +135,14 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 #ifdef CONFIG_PCI
 void pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -168,12 +162,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 		struct pci_controller *hose = &pcie3_hose;
 		int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
 			(host_agent == 5) || (host_agent == 6);
 		int pcie_configured  = io_sel >= 1;
+		struct pci_region *r = hose->regions;
 		u32 temp32;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -187,27 +181,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE3_MEM_BASE,
-					CFG_PCIE3_MEM_PHYS,
-					CFG_PCIE3_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE3_MEM_BASE,
+					CONFIG_SYS_PCIE3_MEM_PHYS,
+					CONFIG_SYS_PCIE3_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE3_IO_BASE,
-					CFG_PCIE3_IO_PHYS,
-					CFG_PCIE3_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE3_IO_BASE,
+					CONFIG_SYS_PCIE3_IO_PHYS,
+					CONFIG_SYS_PCIE3_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -225,7 +215,7 @@ void pci_init_board(void)
 
 			pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
 					PCI_BASE_ADDRESS_1, &temp32);
-			if (temp32 >= CFG_PCIE3_MEM_PHYS) {
+			if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
 				debug(" uli1572 read to %x\n", temp32);
 				in_be32((unsigned *)temp32);
 			}
@@ -240,12 +230,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 		struct pci_controller *hose = &pcie2_hose;
 		int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
-			(host_agent == 6);
+			(host_agent == 6) || (host_agent == 0);
 		int pcie_configured  = io_sel & 4;
+		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 			printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
@@ -258,27 +248,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE2_MEM_BASE,
-					CFG_PCIE2_MEM_PHYS,
-					CFG_PCIE2_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE2_MEM_BASE,
+					CONFIG_SYS_PCIE2_MEM_PHYS,
+					CONFIG_SYS_PCIE2_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE2_IO_BASE,
-					CFG_PCIE2_IO_PHYS,
-					CFG_PCIE2_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE2_IO_BASE,
+					CONFIG_SYS_PCIE2_IO_PHYS,
+					CONFIG_SYS_PCIE2_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -297,12 +283,12 @@ void pci_init_board(void)
 #endif
 #ifdef CONFIG_PCIE1
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 		struct pci_controller *hose = &pcie1_hose;
-		int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
+		int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
 			(host_agent == 5);
 		int pcie_configured  = io_sel & 6;
+		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 			printf ("\n    PCIE1 connected to Slot 2 as %s (base address %x)",
@@ -315,27 +301,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE1_MEM_BASE,
-					CFG_PCIE1_MEM_PHYS,
-					CFG_PCIE1_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE1_MEM_BASE,
+					CONFIG_SYS_PCIE1_MEM_PHYS,
+					CONFIG_SYS_PCIE1_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE1_IO_BASE,
-					CFG_PCIE1_IO_PHYS,
-					CFG_PCIE1_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE1_IO_BASE,
+					CONFIG_SYS_PCIE1_IO_PHYS,
+					CONFIG_SYS_PCIE1_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -359,8 +341,7 @@ void pci_init_board(void)
 
 int board_early_init_r(void)
 {
-	unsigned int i;
-	const unsigned int flashbase = CFG_FLASH_BASE;
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = 2;
 
 	/*
@@ -368,11 +349,9 @@ int board_early_init_r(void)
 	 * so that flash can be erased properly.
 	 */
 
-	/* Invalidate any remaining lines of the flash from caches. */
-	for (i = 0; i < 256*1024*1024; i+=32) {
-		asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
-		asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
-	}
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
 
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
@@ -521,11 +500,58 @@ unsigned long get_board_ddr_clk(ulong dummy)
 }
 #endif
 
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct tsec_info_struct tsec_info[4];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC4
+	SET_STD_TSEC_INFO(tsec_info[num], 4);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+
+		return 0;
+	}
+
+	fsl_sgmii_riser_init(tsec_info, num);
+
+	tsec_eth_init(bis, tsec_info, num);
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
 	ulong base, size;
 
 	ft_cpu_setup(blob, bd);
@@ -535,31 +561,15 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
-	}
 }
 #endif
 
diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c
index 965356a..8d1f646 100644
--- a/board/freescale/mpc8572ds/tlb.c
+++ b/board/freescale/mpc8572ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -52,34 +52,40 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      0, 0, BOOKE_PAGESZ_4K, 1),
 
 	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1M, 1),
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS, CFG_PCIE3_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x40000000, CFG_PCIE3_MEM_PHYS + 0x40000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x50000000, CFG_PCIE3_MEM_PHYS + 0x50000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CFG_PCIE3_IO_PHYS, CFG_PCIE3_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_256K, 1),
+
+	/* *I*G - NAND */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_1M, 1),
+
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c
index 2d22da1..414ac24 100644
--- a/board/freescale/mpc8610hpcd/ddr.c
+++ b/board/freescale/mpc8610hpcd/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c
index 91b922b..2aad28a 100644
--- a/board/freescale/mpc8610hpcd/law.c
+++ b/board/freescale/mpc8610hpcd/law.c
@@ -29,16 +29,16 @@
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index af79fc2..2792778 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -32,22 +32,19 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <spd_sdram.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 void sdram_init(void);
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
 void mpc8610hpcd_diu_init(void);
 
 
 /* called before any console output */
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 
 	gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */
@@ -97,7 +94,7 @@ int misc_init_r(void)
 
 int checkboard(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
 
 	printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
@@ -120,7 +117,7 @@ int checkboard(void)
 phys_size_t
 initdram(int board_type)
 {
-	long dram_size = 0;
+	phys_size_t dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = fsl_ddr_sdram();
@@ -128,18 +125,11 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	puts(" DDR: ");
 	return dram_size;
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	puts(" DDR: ");
 	return dram_size;
 }
@@ -150,10 +140,10 @@ initdram(int board_type)
  * Fixed sdram init -- doesn't use serial presence detect.
  */
 
-long int fixed_sdram(void)
+phys_size_t fixed_sdram(void)
 {
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
 	uint d_init;
 
@@ -200,7 +190,7 @@ long int fixed_sdram(void)
 
 	return 512 * 1024 * 1024;
 #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
 #endif
@@ -239,9 +229,12 @@ static struct pci_controller pcie2_hose;
 
 int first_free_busno = 0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 void pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL)
@@ -254,12 +247,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_configured = (io_sel == 1) || (io_sel == 4);
 	int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
 		(host_agent == 5);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
 		printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
@@ -269,27 +262,23 @@ void pci_init_board(void)
 			pci->pme_msg_det = 0xffffffff;
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCIE1_MEM_BASE,
-			 CFG_PCIE1_MEM_PHYS,
-			 CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE1_MEM_BASE,
+			 CONFIG_SYS_PCIE1_MEM_PHYS,
+			 CONFIG_SYS_PCIE1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCIE1_IO_BASE,
-			 CFG_PCIE1_IO_PHYS,
-			 CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE1_IO_BASE,
+			 CONFIG_SYS_PCIE1_IO_PHYS,
+			 CONFIG_SYS_PCIE1_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int)&pci->cfg_addr,
@@ -311,9 +300,9 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured = (io_sel == 0) || (io_sel == 4);
 	int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
@@ -328,27 +317,23 @@ void pci_init_board(void)
 			pci->pme_msg_det = 0xffffffff;
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCIE2_MEM_BASE,
-			 CFG_PCIE2_MEM_PHYS,
-			 CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE2_MEM_BASE,
+			 CONFIG_SYS_PCIE2_MEM_PHYS,
+			 CONFIG_SYS_PCIE2_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCIE2_IO_BASE,
-			 CFG_PCIE2_IO_PHYS,
-			 CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE2_IO_BASE,
+			 CONFIG_SYS_PCIE2_IO_PHYS,
+			 CONFIG_SYS_PCIE2_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int)&pci->cfg_addr,
@@ -369,10 +354,10 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+	struct pci_region *r = hose->regions;
 
 	if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
 		printf(" PCI connected to PCI slots as %s" \
@@ -381,27 +366,23 @@ void pci_init_board(void)
 			(uint)pci);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCI1_MEM_BASE,
-			 CFG_PCI1_MEM_PHYS,
-			 CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCI1_MEM_BASE,
+			 CONFIG_SYS_PCI1_MEM_PHYS,
+			 CONFIG_SYS_PCI1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCI1_IO_BASE,
-			 CFG_PCI1_IO_PHYS,
-			 CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCI1_IO_BASE,
+			 CONFIG_SYS_PCI1_IO_PHYS,
+			 CONFIG_SYS_PCI1_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr,
@@ -421,12 +402,12 @@ void pci_init_board(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 			     "timebase-frequency", bd->bi_busfreq / 4, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
@@ -441,36 +422,15 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
 
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno
-				- pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-	}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno
-				- pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
 #endif
-	}
 }
 #endif
 
@@ -520,12 +480,7 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
-extern int uli526x_initialize(bd_t *);
-
 int board_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_ULI526)
-	uli526x_initialize(bis);
-#endif
-	return 0;
+	return pci_eth_init(bis);
 }
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 4db941c..cd25d4a 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -43,7 +43,7 @@ static int xres, yres;
 
 void diu_set_pixel_clock(unsigned int pixclock)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	volatile unsigned int *guts_clkdvdr = &gur->clkdvdr;
 	unsigned long speed_ccb, temp, pixval;
@@ -137,7 +137,7 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
 }
 
 U_BOOT_CMD(
-	diufb, CFG_MAXARGS, 1, mpc8610diu_init_show_bmp,
+	diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
 	"diufb init | addr - Init or Display BMP file\n",
 	"init\n    - initialize DIU\n"
 	"addr\n    - display bmp at address 'addr'\n"
diff --git a/board/freescale/mpc8610hpcd/u-boot.lds b/board/freescale/mpc8610hpcd/u-boot.lds
index b88138e..4127492 100644
--- a/board/freescale/mpc8610hpcd/u-boot.lds
+++ b/board/freescale/mpc8610hpcd/u-boot.lds
@@ -128,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk
index f778dcb..487a766 100644
--- a/board/freescale/mpc8641hpcn/config.mk
+++ b/board/freescale/mpc8641hpcn/config.mk
@@ -25,7 +25,7 @@
 # default CCSRBAR is at 0xff700000
 # assume U-Boot is less than 0.5MB
 #
-TEXT_BASE = 0xfff00000
+TEXT_BASE = 0xeff00000
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index 5163abf..3789b54 100644
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -45,44 +46,120 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+	u32 datarate_mhz_low;
+	u32 datarate_mhz_high;
+	u32 n_ranks;
+	u32 clk_adjust;
+	u32 cpo;
+	u32 write_data_delay;
+} board_specific_parameters_t;
+
+/* XXX: these values need to be checked for all interleaving modes.  */
+const board_specific_parameters_t board_specific_parameters[2][16] = {
+	{
+	/* 	memory controller 0		 	*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay	*/
+		{  0, 333,    4,    7,   7,     3},
+		{334, 400,    4,    7,   9,     3},
+		{401, 549,    4,    7,   9,     3},
+		{550, 650,    4,    7,  10,     4},
+
+		{  0, 333,    3,    7,   7,     3},
+		{334, 400,    3,    7,   9,     3},
+		{401, 549,    3,    7,   9,     3},
+		{550, 650,    3,    7,  10,     4},
+
+		{  0, 333,    2,    7,   7,     3},
+		{334, 400,    2,    7,   9,     3},
+		{401, 549,    2,    7,   9,     3},
+		{550, 650,    2,    7,  10,     4},
+
+		{  0, 333,    1,    7,   7,     3},
+		{334, 400,    1,    7,   9,     3},
+		{401, 549,    1,    7,   9,     3},
+		{550, 650,    1,    7,  10,     4}
+	},
+
+	{
+	/* 	memory controller 1			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata	*/
+	/*       mhz| mhz|ranks|adjst|    | delay	*/
+		{  0, 333,    4,    7,   7,    3},
+		{334, 400,    4,    7,   9,    3},
+		{401, 549,    4,    7,   9,    3},
+		{550, 650,    4,    7,  10,    4},
+
+		{  0, 333,    3,    7,   7,    3},
+		{334, 400,    3,    7,   9,    3},
+		{401, 549,    3,    7,   9,    3},
+		{550, 650,    3,    7,  10,    4},
+
+		{  0, 333,    2,    7,   7,    3},
+		{334, 400,    2,    7,   9,    3},
+		{401, 549,    2,    7,   9,    3},
+		{550, 650,    2,    7,  10,    4},
+
+		{  0, 333,    1,    7,   7,    3},
+		{334, 400,    1,    7,   9,    3},
+		{401, 549,    1,    7,   9,    3},
+		{550, 650,    1,    7,  10,    4}
+	}
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			dimm_params_t *pdimm,
+			unsigned int ctrl_num)
 {
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
+	const board_specific_parameters_t *pbsp =
+			&(board_specific_parameters[ctrl_num][0]);
+	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+			sizeof(board_specific_parameters[0][0]);
+	u32 i;
+	u32 j;
+	ulong ddr_freq;
 
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
+	/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
 	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i&1) {      /* odd CS */
+			popts->cs_local_opts[i].odt_rd_cfg = 0;
+			popts->cs_local_opts[i].odt_wr_cfg = 0;
+		} else {	/* even CS */
+			if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
+				(pdimm[i/2].n_ranks != 0)) {
+				popts->cs_local_opts[i].odt_rd_cfg = 3;
+				popts->cs_local_opts[i].odt_wr_cfg = 3;
+			} else {
+				popts->cs_local_opts[i].odt_rd_cfg = 0;
+				popts->cs_local_opts[i].odt_wr_cfg = 4;
+			}
+		}
+	}
 
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
+	/* Get clk_adjust, cpo, write_data_delay, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
-	popts->half_strength_driver_enable = 0;
+	ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000;
+	for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+		if (pdimm[j].n_ranks > 0) {
+			for (i = 0; i < num_params; i++) {
+				if (ddr_freq >= pbsp->datarate_mhz_low &&
+				ddr_freq <= pbsp->datarate_mhz_high &&
+				pdimm[j].n_ranks == pbsp->n_ranks) {
+					popts->clk_adjust = pbsp->clk_adjust;
+					popts->cpo_override = pbsp->cpo;
+					popts->write_data_delay =
+						pbsp->write_data_delay;
+					break;
+				}
+				pbsp++;
+			}
+		}
+	}
+
 }
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 2d6c3c1..bd357b8 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -31,34 +31,38 @@
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
  * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
  * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
- * 0xf800_0000     0xf80f_ffff     CCSRBAR                 1M
- * 0xf810_0000     0xf81f_ffff     PIXIS                   1M
- * 0xfe00_0000     0xffff_ffff     FLASH (boot bank)       32M
+ * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0x8000_0000     0x9fff_ffff     RapidIO                 512M
+ * endif
+ * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0xffc0_0000     0xffc0_ffff     PCI1 IO                 64K
+ * 0xffc1_0000     0xffc1_ffff     PCI2 IO                 64K
+ * 0xffe0_0000     0xffef_ffff     CCSRBAR                 1M
+ * 0xffdf_0000     0xffe0_0000     PIXIS, CF               64K
+ * 0xef80_0000     0xefff_ffff     FLASH (boot bank)       8M
  *
  * Notes:
- *    CCSRBAR don't need a configured Local Access Window.
+ *    CCSRBAR doesn't need a configured Local Access Window.
  *    If flash is 8M at default position (last 8M), no LAW needed.
  */
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
-	SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+#ifdef CONFIG_PCI
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+#elif defined(CONFIG_RIO)
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
-	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 1bb563e..b83ed6c 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -29,14 +29,11 @@
 #include <asm/io.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
 
 int board_early_init_f(void)
 {
@@ -56,7 +53,7 @@ int checkboard(void)
 phys_size_t
 initdram(int board_type)
 {
-	long dram_size = 0;
+	phys_size_t dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = fsl_ddr_sdram();
@@ -64,18 +61,11 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	puts("    DDR: ");
 	return dram_size;
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -85,26 +75,26 @@ initdram(int board_type)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */
-long int
+phys_size_t
 fixed_sdram(void)
 {
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
-	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL;
+	ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS;
 
 #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000008D;
@@ -116,42 +106,22 @@ fixed_sdram(void)
 
 #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
 #else
-	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 #endif
 	asm("sync; isync");
 
 	udelay(500);
 #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
 
 #if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PCI2
@@ -160,20 +130,22 @@ static struct pci_controller pci2_hose;
 
 int first_free_busno = 0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
 
 void pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
+	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
 		>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
 
-#ifdef CONFIG_PCI1
-{
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
-	struct pci_controller *hose = &pci1_hose;
 #ifdef DEBUG
 	uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
 		>> MPC8641_PORBMSR_HA_SHIFT;
@@ -192,27 +164,23 @@ void pci_init_board(void)
 		debug("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -227,8 +195,8 @@ void pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE
-				       + CFG_PCI1_MEM_SIZE - 0x1000000)));
+		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE
+				       + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
 
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
@@ -240,33 +208,28 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
 	struct pci_controller *hose = &pci2_hose;
-
+	struct pci_region *r = hose->regions;
 
 	/* inbound */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI_MEMORY_BUS,
-		       CFG_PCI_MEMORY_PHYS,
-		       CFG_PCI_MEMORY_SIZE,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+	r += fsl_pci_setup_inbound_windows(r);
 
 	/* outbound memory */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS,
+		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
 
-	hose->region_count = 3;
+	hose->region_count = r - hose->regions;
 
 	hose->first_busno=first_free_busno;
 	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -285,32 +248,46 @@ void pci_init_board(void)
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
+	int off;
+	u64 *tmp;
+	u32 *addrcells;
 
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
 #endif
+
+	/*
+	 * Warn if it looks like the device tree doesn't match u-boot.
+	 * This is just an estimation, based on the location of CCSR,
+	 * which is defined by the "reg" property in the soc node.
+	 */
+	off = fdt_path_offset(blob, "/soc8641");
+	addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+	tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
+
+	if (tmp) {
+		u64 addr;
+		if (addrcells && (*addrcells == 1))
+			addr = *(u32 *)tmp;
+		else
+			addr = *tmp;
+
+		if (addr != CONFIG_SYS_CCSRBAR_PHYS)
+			printf("WARNING: The CCSRBAR address in your .dts "
+			       "does not match the address of the CCSR "
+			       "in u-boot.  This means your .dts might "
+			       "be old.\n");
 	}
 }
 #endif
@@ -379,3 +356,10 @@ get_board_sys_clk(ulong dummy)
 
 	return val;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	/* Initialize TSECs */
+	cpu_eth_init(bis);
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds
index 4f884f9..6c9da1f 100644
--- a/board/freescale/mpc8641hpcn/u-boot.lds
+++ b/board/freescale/mpc8641hpcn/u-boot.lds
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index c379460..e682f30 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -44,7 +44,7 @@ SECTIONS
 	  drivers/mtd/libmtd.a			(.text)
 
 	  . = DEFINED(env_offset) ? env_offset : .;
-	  common/environment.o(.text)
+	  common/env_embedded.o(.text)
 
 	  *(.text)
 	}
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }