summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorBenoît Thébaudeau <benoit.thebaudeau@advansee.com>2012-08-20 09:54:53 +0000
committerStefano Babic <sbabic@denx.de>2012-10-16 12:35:10 +0200
commit151d63cb9145b5eeb4585cb1b5a9c95f985a0e12 (patch)
treee93eee64a61c28544e2335f86882b053e8415b92 /board/freescale
parentbd23b22badadcdc414a900828253961fc5ec6c39 (diff)
downloadu-boot-imx-151d63cb9145b5eeb4585cb1b5a9c95f985a0e12.zip
u-boot-imx-151d63cb9145b5eeb4585cb1b5a9c95f985a0e12.tar.gz
u-boot-imx-151d63cb9145b5eeb4585cb1b5a9c95f985a0e12.tar.bz2
mx35: Clean up lowlevel_init
Clean up mx35 lowlevel_init: - Indent with tabs. - Fix comments. - Use defined values instead of literal constants. - Use defined macros instead of duplicating code. - Use macro parameters with default values instead of #define'd configs. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx35pdk/lowlevel_init.S119
-rw-r--r--board/freescale/mx35pdk/mx35pdk.h25
2 files changed, 2 insertions, 142 deletions
diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
index 698c4cf..75bb958 100644
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ b/board/freescale/mx35pdk/lowlevel_init.S
@@ -23,6 +23,7 @@
#include <asm/arch/imx-regs.h>
#include <generated/asm-offsets.h>
#include "mx35pdk.h"
+#include <asm/arch/lowlevel_macro.S>
/*
* return soc version
@@ -40,91 +41,6 @@
addne \ret, \ret, #0x10
.endm
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- */
-.macro init_aips
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_MPR_CONFIG
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_OPACR_CONFIG
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
-.endm
-
-/* MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
- ldr r0, =MAX_BASE_ADDR
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
- ldr r1, =MAX_MPR_CONFIG
- str r1, [r0, #0x000] /* for S0 */
- str r1, [r0, #0x100] /* for S1 */
- str r1, [r0, #0x200] /* for S2 */
- str r1, [r0, #0x300] /* for S3 */
- str r1, [r0, #0x400] /* for S4 */
- /* SGPCR - always park on last master */
- ldr r1, =MAX_SGPCR_CONFIG
- str r1, [r0, #0x010] /* for S0 */
- str r1, [r0, #0x110] /* for S1 */
- str r1, [r0, #0x210] /* for S2 */
- str r1, [r0, #0x310] /* for S3 */
- str r1, [r0, #0x410] /* for S4 */
- /* MGPCR - restore default values */
- ldr r1, =MAX_MGPCR_CONFIG
- str r1, [r0, #0x800] /* for M0 */
- str r1, [r0, #0x900] /* for M1 */
- str r1, [r0, #0xA00] /* for M2 */
- str r1, [r0, #0xB00] /* for M3 */
- str r1, [r0, #0xC00] /* for M4 */
- str r1, [r0, #0xD00] /* for M5 */
-.endm
-
-/* M3IF setup */
-.macro init_m3if
- /* Configure M3IF registers */
- ldr r1, =M3IF_BASE_ADDR
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- ldr r0, =M3IF_CONFIG
- str r0, [r1] /* M3IF control reg */
-.endm
-
/* CPLD on CS5 setup */
.macro init_debug_board
ldr r0, =DBG_BASE_ADDR
@@ -210,38 +126,7 @@
lowlevel_init:
mov r10, lr
- mrc 15, 0, r1, c1, c0, 0
-
- mrc 15, 0, r0, c1, c0, 1
- orr r0, r0, #7
- mcr 15, 0, r0, c1, c0, 1
- orr r1, r1, #(1<<11)
-
- /* Set unaligned access enable */
- orr r1, r1, #(1<<22)
-
- /* Set low int latency enable */
- orr r1, r1, #(1<<21)
-
- mcr 15, 0, r1, c1, c0, 0
-
- mov r0, #0
-
- /* Set branch prediction enable */
- mcr 15, 0, r0, c15, c2, 4
-
- mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
- mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
-
- /*
- * initializes very early AIPS
- * Then it also initializes Multi-Layer AHB Crossbar Switch,
- * M3IF
- * Also setup the Peripheral Port Remap register inside the core
- */
- ldr r0, =0x40000015 /* start from AIPS 2GB region */
- mcr p15, 0, r0, c15, c2, 4
+ core_init
init_aips
diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h
index 6aeb218..f15aa4f 100644
--- a/board/freescale/mx35pdk/mx35pdk.h
+++ b/board/freescale/mx35pdk/mx35pdk.h
@@ -26,31 +26,6 @@
#ifndef __BOARD_MX35_3STACK_H
#define __BOARD_MX35_3STACK_H
-#define AIPS_MPR_CONFIG 0x77777777
-#define AIPS_OPACR_CONFIG 0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG 0x00302154
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG 0x00000010
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG 0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
-#define M3IF_CONFIG 0x00000040
-
#define DBG_BASE_ADDR WEIM_CTRL_CS5
#define DBG_CSCR_U_CONFIG 0x0000D843
#define DBG_CSCR_L_CONFIG 0x22252521