Merge branch 'master' of git://git.denx.de/u-boot-arm

32 files changed, 2631 insertions, 83 deletions

diff --git a/board/freescale/b4860qds/Makefile b/board/freescale/b4860qds/Makefile
new file mode 100644
index 0000000..06018f4
--- /dev/null
+++ b/board/freescale/b4860qds/Makefile
@@ -0,0 +1,54 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-$(CONFIG_B4860QDS)+= eth_b4860qds.o
+COBJS-$(CONFIG_PCI)	+= pci.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
new file mode 100644
index 0000000..41887c2
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -0,0 +1,505 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "b4860qds.h"
+#include "b4860qds_qixis.h"
+#include "b4860qds_crossbar_con.h"
+
+#define CLK_MUX_SEL_MASK	0x4
+#define ETH_PHY_CLK_OUT		0x4
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+	struct cpu_type *cpu = gd->arch.cpu;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	unsigned int i;
+	static const char *const freq[] = {"100", "125", "156.25", "161.13",
+						"122.88", "122.88", "122.88"};
+	int clock;
+
+	printf("Board: %sQDS, ", cpu->name);
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
+		QIXIS_READ(id), QIXIS_READ(arch));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank: %d\n", sw);
+	else if (sw >= 0x8 && sw <= 0xE)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+	printf("FPGA: v%d (%s), build %d",
+		(int)QIXIS_READ(scver), qixis_read_tag(buf),
+		(int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_be32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	/*
+	 * Display the actual SERDES reference clocks as configured by the
+	 * dip switches on the board.  Note that the SWx registers could
+	 * technically be set to force the reference clocks to match the
+	 * values that the SERDES expects (or vice versa).  For now, however,
+	 * we just display both values and hope the user notices when they
+	 * don't match.
+	 */
+	puts("SERDES Reference Clocks: ");
+	sw = QIXIS_READ(brdcfg[2]);
+	clock = (sw >> 5) & 7;
+	printf("Bank1=%sMHz ", freq[clock]);
+	sw = QIXIS_READ(brdcfg[4]);
+	clock = (sw >> 6) & 3;
+	printf("Bank2=%sMHz\n", freq[clock]);
+
+	return 0;
+}
+
+int select_i2c_ch_pca(u8 ch)
+{
+	int ret;
+
+	/* Selecting proper channel via PCA*/
+	ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1);
+	if (ret) {
+		printf("PCA: failed to select proper channel.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int configure_vsc3316_3308(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	unsigned int num_vsc16_con, num_vsc08_con;
+	u32 serdes1_prtcl, serdes2_prtcl;
+	int ret;
+
+	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	if (!serdes1_prtcl) {
+		printf("SERDES1 is not enabled\n");
+		return 0;
+	}
+	serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	if (!serdes2_prtcl) {
+		printf("SERDES2 is not enabled\n");
+		return 0;
+	}
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+	switch (serdes1_prtcl) {
+	case 0x2a:
+	case 0x2C:
+	case 0x2D:
+	case 0x2E:
+			/*
+			 * Configuration:
+			 * SERDES: 1
+			 * Lanes: A,B: SGMII
+			 * Lanes: C,D,E,F,G,H: CPRI
+			 */
+		debug("Configuring crossbar to use onboard SGMII PHYs:"
+				"srds_prctl:%x\n", serdes1_prtcl);
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sgmii_lane_ab, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sgmii_lane_ab, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+
+#ifdef CONFIG_PPC_B4420
+	case 0x18:
+			/*
+			 * Configuration:
+			 * SERDES: 1
+			 * Lanes: A,B,C,D: SGMII
+			 * Lanes: E,F,G,H: CPRI
+			 */
+		debug("Configuring crossbar to use onboard SGMII PHYs:"
+				"srds_prctl:%x\n", serdes1_prtcl);
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sgmii_lane_cd, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sgmii_lane_cd, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+#endif
+
+	case 0x3E:
+	case 0x0D:
+	case 0x0E:
+	case 0x12:
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sfp, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sfp, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+	default:
+		printf("WARNING:VSC crossbars programming not supported for:%x"
+					" SerDes1 Protocol.\n", serdes1_prtcl);
+		return -1;
+	}
+
+	switch (serdes2_prtcl) {
+	case 0x9E:
+	case 0x9A:
+	case 0x98:
+	case 0xb2:
+	case 0x49:
+	case 0x4E:
+	case 0x8D:
+	case 0x7A:
+		num_vsc08_con = NUM_CON_VSC3308;
+		/* Configure VSC3308 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3308);
+		if (!ret) {
+			ret = vsc3308_config(VSC3308_TX_ADDRESS,
+					vsc08_tx_amc, num_vsc08_con);
+			if (ret)
+				return ret;
+			ret = vsc3308_config(VSC3308_RX_ADDRESS,
+					vsc08_rx_amc, num_vsc08_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+	default:
+		printf("WARNING:VSC crossbars programming not supported for: %x"
+					" SerDes2 Protocol.\n", serdes2_prtcl);
+		return -1;
+	}
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	/* Configure VSC3316 and VSC3308 crossbar switches */
+	if (configure_vsc3316_3308())
+		printf("VSC:failed to configure VSC3316/3308.\n");
+	else
+		printf("VSC:VSC3316/3308 successfully configured.\n");
+
+	select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch ((sysclk_conf & 0x0C) >> 2) {
+	case QIXIS_CLK_100:
+		return 100000000;
+	case QIXIS_CLK_125:
+		return 125000000;
+	case QIXIS_CLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (ddrclk_conf & 0x03) {
+	case QIXIS_CLK_100:
+		return 100000000;
+	case QIXIS_CLK_125:
+		return 125000000;
+	case QIXIS_CLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+static int serdes_refclock(u8 sw, u8 sdclk)
+{
+	unsigned int clock;
+	int ret = -1;
+	u8 brdcfg4;
+
+	if (sdclk == 1) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT)
+			return SRDS_PLLCR0_RFCK_SEL_125;
+		else
+			clock = (sw >> 5) & 7;
+	} else
+		clock = (sw >> 6) & 3;
+
+	switch (clock) {
+	case 0:
+		ret = SRDS_PLLCR0_RFCK_SEL_100;
+		break;
+	case 1:
+		ret = SRDS_PLLCR0_RFCK_SEL_125;
+		break;
+	case 2:
+		ret = SRDS_PLLCR0_RFCK_SEL_156_25;
+		break;
+	case 3:
+		ret = SRDS_PLLCR0_RFCK_SEL_161_13;
+		break;
+	case 4:
+	case 5:
+	case 6:
+		ret = SRDS_PLLCR0_RFCK_SEL_122_88;
+		break;
+	default:
+		ret = -1;
+		break;
+	}
+
+	return ret;
+}
+
+static const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	case SRDS_PLLCR0_RFCK_SEL_156_25:
+		return "156.25";
+	case SRDS_PLLCR0_RFCK_SEL_161_13:
+		return "161.13";
+	default:
+		return "122.88";
+	}
+}
+
+#define NUM_SRDS_BANKS	2
+
+int misc_init_r(void)
+{
+	u8 sw;
+	serdes_corenet_t *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 actual[NUM_SRDS_BANKS];
+	unsigned int i;
+	int clock;
+
+	sw = QIXIS_READ(brdcfg[2]);
+	clock = serdes_refclock(sw, 1);
+	if (clock >= 0)
+		actual[0] = clock;
+	else
+		printf("Warning: SDREFCLK1 switch setting is unsupported\n");
+
+	sw = QIXIS_READ(brdcfg[4]);
+	clock = serdes_refclock(sw, 2);
+	if (clock >= 0)
+		actual[1] = clock;
+	else
+		printf("Warning: SDREFCLK2 switch setting unsupported\n");
+
+	for (i = 0; i < NUM_SRDS_BANKS; i++) {
+		u32 pllcr0 = srds_regs->bank[i].pllcr0;
+		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (expected != actual[i]) {
+			printf("Warning: SERDES bank %u expects reference clock"
+			       " %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected),
+			       serdes_clock_to_string(actual[i]));
+		}
+	}
+
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
+
+/*
+ * Dump board switch settings.
+ * The bits that cannot be read/sampled via some FPGA or some
+ * registers, they will be displayed as
+ * underscore in binary format. mask[] has those bits.
+ * Some bits are calculated differently than the actual switches
+ * if booting with overriding by FPGA.
+ */
+void qixis_dump_switch(void)
+{
+	int i;
+	u8 sw[5];
+
+	/*
+	 * Any bit with 1 means that bit cannot be reverse engineered.
+	 * It will be displayed as _ in binary format.
+	 */
+	static const u8 mask[] = {0x07, 0, 0, 0xff, 0};
+	char buf[10];
+	u8 brdcfg[16], dutcfg[16];
+
+	for (i = 0; i < 16; i++) {
+		brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+		dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+	}
+
+	sw[0] = ((brdcfg[0] & 0x0f) << 4)	| \
+		(brdcfg[9] & 0x08);
+	sw[1] = ((dutcfg[1] & 0x01) << 7)	| \
+		((dutcfg[2] & 0x07) << 4)       | \
+		((dutcfg[6] & 0x10) >> 1)       | \
+		((dutcfg[6] & 0x80) >> 5)       | \
+		((dutcfg[1] & 0x40) >> 5)       | \
+		(dutcfg[6] & 0x01);
+	sw[2] = dutcfg[0];
+	sw[3] = 0;
+	sw[4] = ((brdcfg[1] & 0x30) << 2)	| \
+		((brdcfg[1] & 0xc0) >> 2)	| \
+		(brdcfg[1] & 0x0f);
+
+	puts("DIP switch settings:\n");
+	for (i = 0; i < 5; i++) {
+		printf("SW%d         = 0b%s (0x%02x)\n",
+			i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+	}
+}
diff --git a/board/freescale/b4860qds/b4860qds.h b/board/freescale/b4860qds/b4860qds.h
new file mode 100644
index 0000000..f290f3c
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
new file mode 100644
index 0000000..994dec5
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CROSSBAR_CONNECTIONS_H__
+#define __CROSSBAR_CONNECTIONS_H__
+
+#define NUM_CON_VSC3316	8
+#define NUM_CON_VSC3308	4
+
+static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
+				{5, 11}, {4, 5}, {2, 6}, {12, 9} };
+
+static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1},
+				{5, 15}, {4, 14}, {2, 12}, {12, 13} };
+
+static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+#ifdef CONFIG_PPC_B4420
+static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+#endif
+static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
+			{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
+				{11, 11}, {5, 10}, {6, 3}, {9, 12} };
+
+static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9},
+				{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+#ifdef CONFIG_PPC_B4420
+static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+#endif
+
+static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1},
+			{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} };
+
+static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} };
+
+static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} };
+
+static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} };
+
+#endif
diff --git a/board/freescale/b4860qds/b4860qds_qixis.h b/board/freescale/b4860qds/b4860qds_qixis.h
new file mode 100644
index 0000000..575b2ae
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds_qixis.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __B4860QDS_QIXIS_H__
+#define __B4860QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for B4860QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+
+/* CLK */
+#define QIXIS_CLK_66		0x0
+#define QIXIS_CLK_100		0x1
+#define QIXIS_CLK_125		0x2
+#define QIXIS_CLK_133		0x3
+
+#define QIXIS_SRDS1CLK_122		0x5a
+#define QIXIS_SRDS1CLK_125		0x5e
+#endif
diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c
new file mode 100644
index 0000000..dd4c0f6
--- /dev/null
+++ b/board/freescale/b4860qds/ddr.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 2,
+	.rank_density = 2147483648u,
+	.capacity = 4294967296u,
+	.primary_sdram_width = 64,
+	.ec_sdram_width = 8,
+	.registered_dimm = 0,
+	.mirrored_dimm = 1,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 2,	/* ECC */
+	.burst_lengths_bitmask = 0x0c,
+
+	.tCKmin_X_ps = 1071,
+	.caslat_X = 0x2fe << 4,	/* 5,6,7,8,9,10,11,13 */
+	.tAA_ps = 13910,
+	.tWR_ps = 15000,
+	.tRCD_ps = 13910,
+	.tRRD_ps = 6000,
+	.tRP_ps = 13910,
+	.tRAS_ps = 34000,
+	.tRC_ps = 48910,
+	.tRFC_ps = 260000,
+	.tWTR_ps = 7500,
+	.tRTP_ps = 7500,
+	.refresh_rate_ps = 7800000,
+	.tFAW_ps = 35000,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+		unsigned int controller_number,
+		unsigned int dimm_number)
+{
+	const char dimm_model[] = "RAW timing DDR";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+};
+
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  1350,    4,     7, 0x09080807, 0x07060607,   0xff,    2,  0},
+	{2,  1666,    4,     7, 0x09080806, 0x06050607,   0xff,    2,  0},
+	{2,  1900,    3,     7, 0x08070706, 0x06040507,   0xff,    2,  0},
+	{1,  1350,    4,     7, 0x09080807, 0x07060607,   0xff,    2,  0},
+	{1,  1700,    4,     7, 0x09080806, 0x06050607,   0xff,    2,  0},
+	{1,  1900,    3,     7, 0x08070706, 0x06040507,   0xff,    2,  0},
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	pbsp = udimms[0];
+
+
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->cpo_override = pbsp->cpo;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->twoT_en = pbsp->force_2T;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found "
+			"for data rate %lu MT/s\n"
+			"Trying to use the highest speed (%u) parameters\n",
+			ddr_freq, pbsp_highest->datarate_mhz_high);
+		popts->cpo_override = pbsp_highest->cpo;
+		popts->write_data_delay = pbsp_highest->write_data_delay;
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->twoT_en = pbsp_highest->force_2T;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
new file mode 100644
index 0000000..68e2725
--- /dev/null
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Author: Sandeep Kumar Singh <sandeep@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is based on board/freescale/corenet_ds/eth_superhydra.c */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale B4860 "Centaur". The SGMII
+ * PHYs are the two on-board 1Gb ports. There are no RGMII PHY on board.
+ * The 10Gb XGMII PHY is provided via the XAUI riser card. There is only
+ * one Fman device on B4860. The SERDES configuration is used to determine
+ * where the SGMII and XAUI cards exist, and also which Fman MACs are routed
+ * to which PHYs. So for a given Fman MAC, there is one and only PHY it
+ * connects to. MACs cannot be routed to PHYs dynamically. This configuration
+ * is done at boot time by reading SERDES protocol from RCW.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fdt_support.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+#include "../common/qixis.h"
+#include "b4860qds_qixis.h"
+
+#define EMI_NONE       0xFFFFFFFF
+
+#ifdef CONFIG_FMAN_ENET
+
+/*
+ * Mapping of all 16 SERDES lanes to board slots. A value n(>0) will mean that
+ * lane at index is mapped to slot number n. A value of '0' will mean
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	1, 1, 1, 1,
+	0, 0, 0, 0
+};
+
+/*
+ * This function initializes the lane_to_slot[] array. It reads RCW to check
+ * if Serdes2{E,F,G,H} is configured as slot 2 or as SFP and initializes
+ * lane_to_slot[] accordingly
+ */
+static void initialize_lane_to_slot(void)
+{
+	unsigned int  serdes2_prtcl;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Initializing lane to slot: Serdes2 protocol: %x\n",
+			serdes2_prtcl);
+
+	switch (serdes2_prtcl) {
+	case 0x18:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: SGMII
+		 * Lanes: E,F: Aur
+		 * Lanes: G,H: SRIO
+		 */
+	case 0x91:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: SGMII
+		 * Lanes: C,D: SRIO2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x93:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: SGMII
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x98:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: XAUI2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x9a:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: PCI
+		 * Lanes: C,D: SGMII
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x9e:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: PCI
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0xb2:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: PCI
+		 * Lanes: E,F: SGMII 3&4
+		 * Lanes: G,H: XFI
+		 */
+	case 0xc2:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: SGMII
+		 * Lanes: C,D: SRIO2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+		lane_to_slot[12] = 2;
+		lane_to_slot[13] = lane_to_slot[12];
+		lane_to_slot[14] = lane_to_slot[12];
+		lane_to_slot[15] = lane_to_slot[12];
+		break;
+
+	default:
+		printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
+				serdes2_prtcl);
+			break;
+	}
+	return;
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	struct memac_mdio_info memac_mdio_info;
+	struct memac_mdio_info tg_memac_mdio_info;
+	unsigned int i;
+	unsigned int  serdes1_prtcl, serdes2_prtcl;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	if (!serdes1_prtcl) {
+		printf("SERDES1 is not enabled\n");
+		return 0;
+	}
+	serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	if (!serdes2_prtcl) {
+		printf("SERDES2 is not enabled\n");
+		return 0;
+	}
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+	printf("Initializing Fman\n");
+
+	initialize_lane_to_slot();
+
+	memac_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+	memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fm_memac_mdio_init(bis, &memac_mdio_info);
+
+	tg_memac_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tg_memac_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the real 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tg_memac_mdio_info);
+
+	/*
+	 * Program the two on board DTSEC PHY addresses assuming that they are
+	 * all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
+	 * 6 to on board SGMII phys
+	 */
+	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+
+	switch (serdes1_prtcl) {
+	case 0x2a:
+		/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
+		debug("Setting phy addresses for FM1_DTSEC5: %x and"
+			"FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
+			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		/* Fixing Serdes clock by programming FPGA register */
+		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
+		fm_info_set_phy_address(FM1_DTSEC5,
+				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6,
+				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		break;
+#ifdef CONFIG_PPC_B4420
+	case 0x18:
+		/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
+		debug("Setting phy addresses for FM1_DTSEC3: %x and"
+			"FM1_DTSEC4: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
+			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		/* Fixing Serdes clock by programming FPGA register */
+		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		break;
+#endif
+	default:
+		printf("Fman:  Unsupported SerDes1 Protocol 0x%02x\n",
+				serdes1_prtcl);
+		break;
+	}
+	switch (serdes2_prtcl) {
+	case 0x18:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC1,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR);
+		break;
+	case 0x49:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC1,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
+		break;
+	case 0x8d:
+	case 0xb2:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		break;
+	default:
+		printf("Fman:  Unsupported SerDes2 Protocol 0x%02x\n",
+				serdes2_prtcl);
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			fm_info_set_mdio(i,
+				miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
+			break;
+		default:
+			printf("Fman1: DTSEC%u set to unknown interface %i\n",
+					idx + 1, fm_info_get_enet_if(i));
+			fm_info_set_phy_address(i, 0);
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	int phy;
+	char alias[32];
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		phy = fm_info_get_phy_address(port);
+
+		sprintf(alias, "phy_sgmii_%x", phy);
+		fdt_set_phy_handle(fdt, compat, addr, alias);
+	}
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	int i;
+	char alias[32];
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_NONE:
+			sprintf(alias, "ethernet%u", i);
+			fdt_status_disabled_by_alias(fdt, alias);
+			break;
+		default:
+			break;
+		}
+	}
+}
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
new file mode 100644
index 0000000..4142e01
--- /dev/null
+++ b/board/freescale/b4860qds/law.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/b4860qds/pci.c b/board/freescale/b4860qds/pci.c
new file mode 100644
index 0000000..b130d13
--- /dev/null
+++ b/board/freescale/b4860qds/pci.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
new file mode 100644
index 0000000..373cb78
--- /dev/null
+++ b/board/freescale/b4860qds/tlb.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
+                      CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_64K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 6, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 8, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 11, BOOKE_PAGESZ_64K, 1),
+#endif
+	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_4K, 1),
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c
index 2e0e55f..fe870b6 100644
--- a/board/freescale/bsc9131rdb/bsc9131rdb.c
+++ b/board/freescale/bsc9131rdb/bsc9131rdb.c
@@ -59,7 +59,7 @@ int checkboard(void)
 {
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
new file mode 100644
index 0000000..267400b
--- /dev/null
+++ b/board/freescale/bsc9132qds/Makefile
@@ -0,0 +1,52 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
new file mode 100644
index 0000000..4a3dbfe
--- /dev/null
+++ b/board/freescale/bsc9132qds/README
@@ -0,0 +1,150 @@
+Overview
+--------
+ The BSC9132 is a highly integrated device that targets the evolving
+ Microcell, Picocell, and Enterprise-Femto base station market subsegments.
+
+ The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
+ core technologies with MAPLE-B2P baseband acceleration processing elements
+ to address the need for a high performance, low cost, integrated solution
+ that handles all required processing layers without the need for an
+ external device except for an RF transceiver or, in a Micro base station
+ configuration, a host device that handles the L3/L4 and handover between
+ sectors.
+
+ The BSC9132 SoC includes the following function and features:
+    - Power Architecture subsystem including two e500 processors with
+	512-Kbyte shared L2 cache
+    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
+	cache
+    - 32 Kbyte of shared M3 memory
+    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
+      Processing (MAPLE-B2P)
+    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
+      ECC), up to 1333 MHz data rate
+    - Dedicated security engine featuring trusted boot
+    - Two DMA controllers
+         - OCNDMA with four bidirectional channels
+         - SysDMA with sixteen bidirectional channels
+    - Interfaces
+        - Four-lane SerDes PHY
+	    - PCI Express controller complies with the PEX Specification-Rev 2.0
+        - Two Common Public Radio Interface (CPRI) controller lanes
+	    - High-speed USB 2.0 host and device controller with ULPI interface
+        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+	    - Antenna interface controller (AIC), supporting four industry
+		standard JESD207/four custom ADI RF interfaces
+       - ADI lanes support both full duplex FDD support & half duplex TDD
+       - Universal Subscriber Identity Module (USIM) interface that
+	   facilitates communication to SIM cards or Eurochip pre-paid phone
+	   cards
+       - Two DUART, two eSPI, and two I2C controllers
+       - Integrated Flash memory controller (IFC)
+       - GPIO
+     - Sixteen 32-bit timers
+
+The SC3850 core subsystem consists of the following:
+ - 32 KB, 8-way, level 1 instruction cache (L1 ICache)
+ - 32 KB, 8-way, level 1 data cache (L1 DCache)
+ - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory)
+ - Memory management unit (MMU)
+ - Global interrupt controller ( GIC)
+ - Debug and profiling unit (DPU)
+ - Two 32-bit quad timers
+
+BSC9132QDS board Overview
+-------------------------
+ 2Gbyte DDR3 (on board DDR), Dual Ranki
+ 32Mbyte 16bit NOR flash
+ 128Mbyte 2K page size NAND Flash
+ 256 Kbit M24256 I2C EEPROM
+ 128 Mbit SPI Flash memory
+ SD slot
+ USB-ULPI
+ eTSEC1: Connected to SGMII PHY
+ eTSEC2: Connected to SGMII PHY
+ PCIe
+ CPRI
+ SerDes
+ I2C RTC
+ DUART interface: supports one UARTs up to 115200 bps for console display
+
+Frequency Combinations Supported
+--------------------------------
+Core MHz/CCB MHz/DDR(MT/s)
+1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz
+     (SYSCLK = 100MHz, DDRCLK = 100MHz)
+2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz
+     (SYSCLK = 100MHz, DDRCLK = 133MHz)
+
+Boot Methods Supported
+-----------------------
+1. NOR Flash
+2. NAND Flash
+3. SD Card
+4. SPI flash
+
+Default Boot Method
+--------------------
+NOR boot
+
+Building U-boot
+--------------
+To build the u-boot for BSC9132QDS:
+1. NOR Flash
+	make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
+2. NAND Flash : It is currently not supported
+3. SPI Flash
+	make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK
+4. SD Card
+	make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK
+
+Memory map
+-----------
+ 0x0000_0000	0x7FFF_FFFF	DDR			2G cacheable
+ 0x8000_0000	0x8FFF_FFFF	NOR Flash		256M
+ 0x9000_0000	0x9FFF_FFFF	PCIe Memory 		256M
+ 0xA000_0000	0xA7FF_FFFF	DSP core1 L2 space	128M
+ 0xB000_0000	0xB0FF_FFFF	DSP core0 M2 space	16M
+ 0xB100_0000	0xB1FF_FFFF	DSP core1 M2 space	16M
+ 0xC000_0000	0xC000_7FFF	M3 Memory		32K
+ 0xC001_0000	0xC001_FFFF	PCI Express I/O		64K
+ 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
+ 0xC1F0_0000	0xC1F7_FFFF	PA SRAM Region 0	512K
+ 0xC1F8_0000	0xC1FB_FFFF	PA SRAM Region 1	512K
+ 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
+ 0xFEE0_0000	0xFEE0_0FFF	DSP Boot ROM		4K
+ 0xFF60_0000	0xFF6F_FFFF 	DSP CCSR		1M
+ 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
+ 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND Buffer 8M
+
+Flashing Images
+---------------
+To place a new u-boot image in the NAND flash and then boot
+with that new image temporarily, use this:
+	tftp 1000000 u-boot-nand.bin
+	nand erase 0 100000
+	nand write 1000000 0 100000
+	reset
+
+Using the Device Tree Source File
+---------------------------------
+To create the DTB (Device Tree Binary) image file,
+use a command similar to this:
+
+	dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb
+
+Likely, that .dts file will come from here;
+
+	linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts
+
+Booting Linux
+-------------
+Place a linux uImage in the TFTP disk area.
+
+	tftp 1000000 uImage
+	tftp 2000000 rootfs.ext2.gz.uboot
+	tftp c00000 bsc9132qds.dtb
+	bootm 1000000 2000000 c00000
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
new file mode 100644
index 0000000..6e1b558
--- /dev/null
+++ b/board/freescale/bsc9132qds/bsc9132qds.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <asm/fsl_ifc.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#endif
+
+#include "../common/qixis.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+
+int board_early_init_f(void)
+{
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+	return 0;
+}
+
+void board_config_serdes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+
+	switch (srds_cfg) {
+	/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
+	case  1:
+	case  2:
+	case  3:
+	case  4:
+	case  5:
+	case 22:
+	case 23:
+	case 24:
+	case 25:
+	case 26:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x03);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 CPRI 1 */
+	case  6:
+	case  7:
+	case  8:
+	case  9:
+	case 10:
+	case 27:
+	case 28:
+	case 29:
+	case 30:
+	case 31:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x01);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 SGMII2 */
+	case 11:
+	case 32:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x00);
+		break;
+
+	/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+	case 33:
+	case 34:
+	case 35:
+	case 36:
+	case 37:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x07);
+		break;
+
+	/* PEX(1) SGMII2 SGMII1 CPRI 1 */
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 38:
+	case 39:
+	case 40:
+	case 41:
+	case 42:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x05);
+		break;
+
+	/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
+	case 43:
+	case 44:
+	case 45:
+	case 46:
+	case 47:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
+		break;
+
+
+	default:
+		break;
+	}
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SYS_NO_FLASH
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_64M, 1);
+
+	set_tlb(1, flashbase + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
+#endif
+	board_config_serdes_mux();
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+	struct cpu_type *cpu;
+	u8 sw;
+
+	cpu = gd->arch.cpu;
+	printf("Board: %sQDS\n", cpu->name);
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
+	QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	printf("IFC chip select:");
+	switch (sw) {
+	case 0:
+		printf("NOR\n");
+		break;
+	case 2:
+		printf("Promjet\n");
+		break;
+	case 4:
+		printf("NAND\n");
+		break;
+	default:
+		printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+
+#endif
+
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+	tsec_eth_init(bis, tsec_info, num);
+
+	#ifdef CONFIG_PCI
+	pci_eth_init(bis);
+	#endif
+
+	return 0;
+}
+#endif
+
+#define USBMUX_SEL_MASK		0xc0
+#define USBMUX_SEL_UART2	0xc0
+#define USBMUX_SEL_USB		0x40
+#define SPIMUX_SEL_UART3	0x80
+#define GPS_MUX_SEL_GPS		0x40
+
+#define TSEC_1588_CLKIN_MASK	0x03
+#define CON_XCVR_REF_CLK	0x00
+
+int misc_init_r(void)
+{
+	u8 val;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	/*Configure 1588 clock-in source from RF Card*/
+	val = QIXIS_READ_I2C(brdcfg[5]);
+	QIXIS_WRITE_I2C(brdcfg[5],
+		(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
+
+	if (hwconfig("uart2") && hwconfig("usb1")) {
+		printf("UART2 and USB cannot work together on the board\n");
+		printf("Remove one from hwconfig and reset\n");
+	} else {
+		if (hwconfig("uart2")) {
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_USB_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
+		} else {
+			/* By default USB should be selected.
+			* Programming FPGA to select USB. */
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
+		}
+
+	}
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
+			clrbits_be32(&gur->pmuxcr,
+				MPC85xx_PMUXCR0_SIM_SEL_MASK);
+			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* UART3 and SPI1 (Flashes) are muxed together */
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_UART3_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
+
+			/* MUX to select UART3 connection to J24 header
+			 * or to GPS */
+			val = QIXIS_READ_I2C(brdcfg[6]);
+			if (hwconfig("gps"))
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val | GPS_MUX_SEL_GPS));
+			else
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val & ~(GPS_MUX_SEL_GPS)));
+		}
+	}
+	return 0;
+}
+
+void fdt_del_node_compat(void *blob, const char *compatible)
+{
+	int err;
+	int off = fdt_node_offset_by_compatible(blob, -1, compatible);
+	if (off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compatible, fdt_strerror(off));
+		return;
+	}
+	err = fdt_del_node(blob, off);
+	if (err < 0) {
+		printf("WARNING: could not remove %s: %s.\n",
+			compatible, fdt_strerror(err));
+	}
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	#if defined(CONFIG_PCI)
+	FT_FSL_PCI_SETUP;
+	#endif
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	if (!(hwconfig("uart2") && hwconfig("usb1"))) {
+		/* If uart2 is there in hwconfig remove usb node from
+		 *  device tree */
+
+		if (hwconfig("uart2")) {
+			/* remove dts usb node */
+			fdt_del_node_compat(blob, "fsl-usb2-dr");
+		} else {
+			fdt_fixup_dr_usb(blob, bd);
+			fdt_del_node_and_alias(blob, "serial2");
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC)
+			/* Delete SPI node from the device tree */
+				fdt_del_node_and_alias(blob, "spi1");
+	} else
+		fdt_del_node_and_alias(blob, "serial3");
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			/* remove dts sdhc node */
+			fdt_del_node_compat(blob, "fsl,esdhc");
+		} else if (romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* remove dts sim node */
+			fdt_del_node_compat(blob, "fsl,sim-v1.0");
+			printf("SIM & SDHC can't work together on the board");
+			printf("\nRemove sim from hwconfig and reset\n");
+		}
+	}
+}
+#endif
diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c
new file mode 100644
index 0000000..946ad19
--- /dev/null
+++ b/board/freescale/bsc9132qds/ddr.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+	{750, 850, &ddr_cfg_regs_800},
+	{1060, 1333, &ddr_cfg_regs_1333},
+	{0, 0, NULL}
+};
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+phys_size_t fixed_sdram(void)
+{
+	int i;
+	char buf[32];
+	fsl_ddr_cfg_regs_t ddr_cfg_regs;
+	phys_size_t ddr_size;
+	ulong ddr_freq, ddr_freq_mhz;
+
+	ddr_freq = get_ddr_freq(0);
+	ddr_freq_mhz = ddr_freq / 1000000;
+
+	printf("Configuring DDR for %s MT/s data rate\n",
+				strmhz(buf, ddr_freq));
+
+	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
+		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
+		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
+			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
+							sizeof(ddr_cfg_regs));
+			break;
+		}
+	}
+
+	if (fixed_ddr_parm_0[i].max_freq == 0)
+		panic("Unsupported DDR data rate %s MT/s data rate\n",
+					strmhz(buf, ddr_freq));
+
+	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
+					LAW_TRGT_IF_DDR_1) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	}
+
+	return ddr_size;
+}
+
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
+/* Micron MT41J512M8_187E */
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 1,
+	.rank_density = 1073741824u,
+	.capacity = 1073741824u,
+	.primary_sdram_width = 32,
+	.ec_sdram_width = 0,
+	.registered_dimm = 0,
+	.mirrored_dimm = 0,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 0,
+	.burst_lengths_bitmask = 0x0c,
+
+	.tCKmin_X_ps = 1870,
+	.caslat_X = 0x1e << 4,	/* 5,6,7,8 */
+	.tAA_ps = 13125,
+	.tWR_ps = 15000,
+	.tRCD_ps = 13125,
+	.tRRD_ps = 7500,
+	.tRP_ps = 13125,
+	.tRAS_ps = 37500,
+	.tRC_ps = 50625,
+	.tRFC_ps = 160000,
+	.tWTR_ps = 7500,
+	.tRTP_ps = 7500,
+	.refresh_rate_ps = 7800000,
+	.tFAW_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+		unsigned int controller_number,
+		unsigned int dimm_number)
+{
+	const char dimm_model[] = "Fixed DDR on board";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	int i;
+	popts->clk_adjust = 6;
+	popts->cpo_override = 0x1f;
+	popts->write_data_delay = 2;
+	popts->half_strength_driver_enable = 1;
+	/* Write leveling override */
+	popts->wrlvl_en = 1;
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x8;
+	popts->trwt_override = 1;
+	popts->trwt = 0;
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+	}
+}
+
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
new file mode 100644
index 0000000..dc23658
--- /dev/null
+++ b/board/freescale/bsc9132qds/law.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SYS_NO_FLASH
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
+#endif
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+	SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
new file mode 100644
index 0000000..0e4545f
--- /dev/null
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_4K, 1),
+
+	/* *I*G* - CCSRBAR (PA) */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 1, BOOKE_PAGESZ_1M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 3, BOOKE_PAGESZ_64M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 4, BOOKE_PAGESZ_64M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT)
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 8, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCI
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 6, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 7, BOOKE_PAGESZ_64K, 1),
+#endif
+
+		/* *I*G - Board FPGA  */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 9, BOOKE_PAGESZ_256K, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 5, BOOKE_PAGESZ_1M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index c92902a..2b74d02 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -14,8 +14,23 @@
 #include <common.h>
 #include <command.h>
 #include <asm/io.h>
+#include <linux/time.h>
+#include <i2c.h>
 #include "qixis.h"
 
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+u8 qixis_read_i2c(unsigned int reg)
+{
+	return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg);
+}
+
+void qixis_write_i2c(unsigned int reg, u8 value)
+{
+	u8 val = value;
+	i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val);
+}
+#endif
+
 u8 qixis_read(unsigned int reg)
 {
 	void *p = (void *)QIXIS_BASE;
@@ -30,6 +45,72 @@ void qixis_write(unsigned int reg, u8 value)
 	out_8(p + reg, value);
 }
 
+u16 qixis_read_minor(void)
+{
+	u16 minor;
+
+	/* this data is in little endian */
+	QIXIS_WRITE(tagdata, 5);
+	minor = QIXIS_READ(tagdata);
+	QIXIS_WRITE(tagdata, 6);
+	minor += QIXIS_READ(tagdata) << 8;
+
+	return minor;
+}
+
+char *qixis_read_time(char *result)
+{
+	time_t time = 0;
+	int i;
+
+	/* timestamp is in 32-bit big endian */
+	for (i = 8; i <= 11; i++) {
+		QIXIS_WRITE(tagdata, i);
+		time =  (time << 8) + QIXIS_READ(tagdata);
+	}
+
+	return ctime_r(&time, result);
+}
+
+char *qixis_read_tag(char *buf)
+{
+	int i;
+	char tag, *ptr = buf;
+
+	for (i = 16; i <= 63; i++) {
+		QIXIS_WRITE(tagdata, i);
+		tag = QIXIS_READ(tagdata);
+		*(ptr++) = tag;
+		if (!tag)
+			break;
+	}
+	if (i > 63)
+		*ptr = '\0';
+
+	return buf;
+}
+
+/*
+ * return the string of binary of u8 in the format of
+ * 1010 10_0. The masked bit is filled as underscore.
+ */
+const char *byte_to_binary_mask(u8 val, u8 mask, char *buf)
+{
+	char *ptr;
+	int i;
+
+	ptr = buf;
+	for (i = 0x80; i > 0x08 ; i >>= 1, ptr++)
+		*ptr = (val & i) ? '1' : ((mask & i) ? '_' : '0');
+	*(ptr++) = ' ';
+	for (i = 0x08; i > 0 ; i >>= 1, ptr++)
+		*ptr = (val & i) ? '1' : ((mask & i) ? '_' : '0');
+
+	*ptr = '\0';
+
+	return buf;
+}
+
 void qixis_reset(void)
 {
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
@@ -61,7 +142,6 @@ void set_altbank(void)
 	QIXIS_WRITE(brdcfg[0], reg);
 }
 
-#ifdef DEBUG
 static void qixis_dump_regs(void)
 {
 	int i;
@@ -91,7 +171,14 @@ static void qixis_dump_regs(void)
 	printf("stat_sys = %02x\n", QIXIS_READ(stat_sys));
 	printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
 }
-#endif
+
+static void __qixis_dump_switch(void)
+{
+	puts("Reverse engineering switch is not implemented for this board\n");
+}
+
+void qixis_dump_switch(void)
+	__attribute__((weak, alias("__qixis_dump_switch")));
 
 int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -122,16 +209,13 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				return 0;
 			}
 		}
-	}
-
-#ifdef DEBUG
-	else if (strcmp(argv[1], "dump") == 0) {
+	} else if (strcmp(argv[1], "dump") == 0) {
 		qixis_dump_regs();
 		return 0;
-	}
-#endif
-
-	else {
+	} else if (strcmp(argv[1], "switch") == 0) {
+		qixis_dump_switch();
+		return 0;
+	} else {
 		printf("Invalid option: %s\n", argv[1]);
 		return 1;
 	}
@@ -146,7 +230,6 @@ U_BOOT_CMD(
 	"qixis_reset altbank - reset to alternate bank\n"
 	"qixis watchdog <watchdog_period> - set the watchdog period\n"
 	"	period: 1s 2s 4s 8s 16s 32s 1min 2min 4min 8min\n"
-#ifdef DEBUG
 	"qixis_reset dump - display the QIXIS registers\n"
-#endif
+	"qixis_reset switch - display switch\n"
 	);
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index b98b180..8d914d5 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -88,8 +88,21 @@ struct qixis {
 
 u8 qixis_read(unsigned int reg);
 void qixis_write(unsigned int reg, u8 value);
+u16 qixis_read_minor(void);
+char *qixis_read_time(char *result);
+char *qixis_read_tag(char *buf);
+const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+u8 qixis_read_i2c(unsigned int reg);
+void qixis_write_i2c(unsigned int reg, u8 value);
+#endif
 
 #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
 #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+#define QIXIS_WRITE_I2C(reg, value) \
+			qixis_write_i2c(offsetof(struct qixis, reg), value)
+#endif
 
 #endif
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index 21428e3..48f7155 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int checkboard (void)
 {
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 	static const char * const freq[] = {"100", "125", "156.25", "212.5" };
diff --git a/board/freescale/corenet_ds/rcw_p2041rdb.cfg b/board/freescale/corenet_ds/rcw_p2041rdb.cfg
new file mode 100644
index 0000000..8df19dd
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p2041rdb.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P2041RDB.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+12600000 00000000 241C0000 00000000
+649FA0C1 C3C02000 58000000 40000000
+00000000 00000000 00000000 D0030F07
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 1071803..648f0ec 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -31,7 +31,7 @@
 #include <vsc7385.h>
 #include <ns16550.h>
 #include <nand.h>
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 #include <asm/gpio.h>
 #endif
 
@@ -45,7 +45,7 @@ int board_early_init_f(void)
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
 #endif
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 	mpc83xx_gpio_init_f();
 #endif
 
@@ -54,7 +54,7 @@ int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
 	mpc83xx_gpio_init_r();
 #endif
 
@@ -67,7 +67,7 @@ int checkboard(void)
 	return 0;
 }
 
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 static struct pci_region pci_regions[] = {
 	{
 		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
@@ -140,7 +140,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
-#else /* CONFIG_NAND_SPL */
+#else /* CONFIG_SPL_BUILD */
 void board_init_f(ulong bootflag)
 {
 	board_early_init_f();
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index 6d00caf..49310bd 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -99,7 +99,7 @@ unsigned long get_sdram_size(void)
 	struct cpu_type *cpu;
 	phys_size_t ddr_size;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16it DDR width */
 	if (cpu->soc_ver == SVR_P1014)
 		ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
@@ -144,7 +144,7 @@ phys_size_t fixed_sdram(void)
 		panic("Unsupported DDR data rate %s MT/s data rate\n",
 					strmhz(buf, ddr_freq));
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16bit DDR width */
 	if (cpu->soc_ver == SVR_P1014) {
 		ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
@@ -237,7 +237,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	popts->trwt_override = 1;
 	popts->trwt = 0;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16it DDR width */
 	if (cpu->soc_ver == SVR_P1014)
 		popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index dfeb86f..11e2e8a 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -164,7 +164,7 @@ int checkboard(void)
 {
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
@@ -178,7 +178,7 @@ int board_eth_init(bd_t *bis)
 	struct cpu_type *cpu;
 	int num = 0;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 #ifdef CONFIG_TSEC1
 	SET_STD_TSEC_INFO(tsec_info[num], 1);
@@ -283,7 +283,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 	phys_size_t size;
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 	ft_cpu_setup(blob, bd);
 
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
index 916439c..b16b8c8 100644
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ b/board/freescale/p1_p2_rdb/ddr.c
@@ -202,7 +202,7 @@ phys_size_t fixed_sdram (void)
 	struct cpu_type *cpu;
 	ulong ddr_freq, ddr_freq_mhz;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1020 and it's derivatives support max 32bit DDR width */
 	if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) {
 		ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2);
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 437eaf0..9c6683d 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -108,7 +108,7 @@ int checkboard (void)
 	else
 		panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
 
 	setbits_be32(&pgpio->gpdir, GPIO_DIR);
diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c
index fec9777..4b0d577 100644
--- a/board/freescale/p2041rdb/eth.c
+++ b/board/freescale/p2041rdb/eth.c
@@ -136,11 +136,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 }
 #endif /* #ifdef CONFIG_FMAN_ENET */
 
-#define CPLD_LANE_A_SEL	0x1
-#define CPLD_LANE_G_SEL	0x2
-#define CPLD_LANE_C_SEL	0x4
-#define CPLD_LANE_D_SEL	0x8
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_FMAN_ENET
@@ -148,10 +143,6 @@ int board_eth_init(bd_t *bis)
 	struct tgec_mdio_info tgec_mdio_info;
 	unsigned int i, slot;
 	int lane;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-	u8 mux = CPLD_READ(serdes_mux);
 
 	printf("Initializing Fman\n");
 
@@ -181,36 +172,6 @@ int board_eth_init(bd_t *bis)
 	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
 	fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
 
-	mux &= ~(CPLD_LANE_A_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL);
-	switch (srds_prtcl) {
-	case 0x2:
-	case 0xf:
-		mux &= ~CPLD_LANE_G_SEL;
-		break;
-	case 0x5:
-	case 0x9:
-	case 0xa:
-	case 0x17:
-		mux |= CPLD_LANE_G_SEL;
-		break;
-	case 0x14:
-		mux = (mux & (~CPLD_LANE_G_SEL)) | CPLD_LANE_A_SEL;
-		break;
-	case 0x8:
-	case 0x16:
-	case 0x19:
-	case 0x1a:
-		mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
-		break;
-	case 0x1c:
-		mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
-		break;
-	default:
-		printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
-		break;
-	}
-	CPLD_WRITE(serdes_mux, mux);
-
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		int idx = i - FM1_DTSEC1;
 
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index d2732f5..a706a6d 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -43,7 +43,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int checkboard(void)
 {
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 
@@ -101,6 +101,49 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#define CPLD_LANE_A_SEL	0x1
+#define CPLD_LANE_G_SEL	0x2
+#define CPLD_LANE_C_SEL	0x4
+#define CPLD_LANE_D_SEL	0x8
+
+void board_config_lanes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
+
+	u8 mux = 0;
+	switch (srds_prtcl) {
+	case 0x2:
+	case 0x5:
+	case 0x9:
+	case 0xa:
+	case 0xf:
+		break;
+	case 0x8:
+		mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
+		break;
+	case 0x14:
+		mux |= CPLD_LANE_A_SEL;
+		break;
+	case 0x17:
+		mux |= CPLD_LANE_G_SEL;
+		break;
+	case 0x16:
+	case 0x19:
+	case 0x1a:
+		mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
+		break;
+	case 0x1c:
+		mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
+		break;
+	default:
+		printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
+		break;
+	}
+	CPLD_WRITE(serdes_mux, mux);
+}
+
 int board_early_init_r(void)
 {
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
@@ -124,6 +167,7 @@ int board_early_init_r(void)
 
 	set_liodns();
 	setup_portals();
+	board_config_lanes_mux();
 
 	return 0;
 }
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 5debcf6..6f2c5c8 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -40,7 +40,7 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
 #endif
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
 #endif
 };
 
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index 88b8ced..3c95f3f 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -42,16 +42,29 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
+
+static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
+
+static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
+
+static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
+
 int checkboard(void)
 {
+	char buf[64];
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 
 	printf("Board: %sQDS, ", cpu->name);
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
+		QIXIS_READ(id), QIXIS_READ(arch));
 
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@@ -65,6 +78,12 @@ int checkboard(void)
 	else
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 
+	printf("FPGA: v%d (%s), build %d",
+		(int)QIXIS_READ(scver), qixis_read_tag(buf),
+		(int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
 	/* Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
 	 */
@@ -393,3 +412,63 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_board_enet(blob);
 #endif
 }
+
+/*
+ * Reverse engineering switch settings.
+ * Some bits cannot be figured out. They will be displayed as
+ * underscore in binary format. mask[] has those bits.
+ * Some bits are calculated differently than the actual switches
+ * if booting with overriding by FPGA.
+ */
+void qixis_dump_switch(void)
+{
+	int i;
+	u8 sw[9];
+
+	/*
+	 * Any bit with 1 means that bit cannot be reverse engineered.
+	 * It will be displayed as _ in binary format.
+	 */
+	static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f};
+	char buf[10];
+	u8 brdcfg[16], dutcfg[16];
+
+	for (i = 0; i < 16; i++) {
+		brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+		dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+	}
+
+	sw[0] = dutcfg[0];
+	sw[1] = (dutcfg[1] << 0x07)		| \
+		((dutcfg[12] & 0xC0) >> 1)	| \
+		((dutcfg[11] & 0xE0) >> 3)	| \
+		((dutcfg[6] & 0x80) >> 6)	| \
+		((dutcfg[1] & 0x80) >> 7);
+	sw[2] = ((brdcfg[1] & 0x0f) << 4)	| \
+		((brdcfg[1] & 0x30) >> 2)	| \
+		((brdcfg[1] & 0x40) >> 5)	| \
+		((brdcfg[1] & 0x80) >> 7);
+	sw[3] = brdcfg[2];
+	sw[4] = ((dutcfg[2] & 0x01) << 7)	| \
+		((dutcfg[2] & 0x06) << 4)	| \
+		((~QIXIS_READ(present)) & 0x10)	| \
+		((brdcfg[3] & 0x80) >> 4)	| \
+		((brdcfg[3] & 0x01) << 2)	| \
+		((brdcfg[6] == 0x62) ? 3 :	\
+		((brdcfg[6] == 0x5a) ? 2 :	\
+		((brdcfg[6] == 0x5e) ? 1 : 0)));
+	sw[5] = ((brdcfg[0] & 0x0f) << 4)	| \
+		((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
+		((brdcfg[0] & 0x40) >> 5);
+	sw[6] = (brdcfg[11] & 0x20);
+	sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
+		((brdcfg[5] & 0x10) << 2);
+	sw[8] = ((brdcfg[12] & 0x08) << 4)	| \
+		((brdcfg[12] & 0x03) << 5);
+
+	puts("DIP switch (reverse-engineering)\n");
+	for (i = 0; i < 9; i++) {
+		printf("SW%d         = 0b%s (0x%02x)\n",
+			i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+	}
+}
diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h
index c6a3492..f290f3c 100644
--- a/board/freescale/t4qds/t4qds.h
+++ b/board/freescale/t4qds/t4qds.h
@@ -23,15 +23,4 @@
 void fdt_fixup_board_enet(void *blob);
 void pci_of_setup(void *blob, bd_t *bd);
 
-static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
-				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
-
-static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
-				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
-
-static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
-				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
-
-static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
-				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
 #endif
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 078a6e4..80eb511 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -125,7 +125,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 16, BOOKE_PAGESZ_1M, 1),
+			0, 16, BOOKE_PAGESZ_64K, 1),
 #endif
 	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,