Merge git://git.denx.de/u-boot

49 files changed, 944 insertions, 253 deletions

diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 501d4b3..df90476 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -26,7 +26,7 @@
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <fdt_support.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 #include "../common/ngpixis.h"
 #include "../common/fman.h"
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 87d0578..51d2814 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_P4080DS)	+= p_corenet/
 obj-$(CONFIG_P5020DS)	+= p_corenet/
 obj-$(CONFIG_P5040DS)	+= p_corenet/
 
-obj-$(CONFIG_LS102XA_NS_ACCESS)	+= ns_access.o
+obj-$(CONFIG_LAYERSCAPE_NS_ACCESS)	+= ns_access.o
 
 ifdef CONFIG_SECURE_BOOT
 obj-$(CONFIG_CMD_ESBC_VALIDATE) += fsl_validate.o cmd_esbc_validate.o
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
index 8e8b7fa..a498c65 100644
--- a/board/freescale/common/arm_sleep.c
+++ b/board/freescale/common/arm_sleep.c
@@ -12,7 +12,6 @@
 #include <asm/secure.h>
 #endif
 #include <asm/armv7.h>
-#include <asm/cache.h>
 
 #if defined(CONFIG_LS102XA)
 #include <asm/arch/immap_ls102xa.h>
@@ -65,8 +64,6 @@ static void dp_ddr_restore(void)
 
 	for (i = 0; i < DDR_BUFF_LEN / 8; i++)
 		*dst++ = *src++;
-
-	flush_dcache_all();
 }
 
 static void dp_resume_prepare(void)
@@ -74,7 +71,6 @@ static void dp_resume_prepare(void)
 	dp_ddr_restore();
 	board_sleep_prepare();
 	armv7_init_nonsec();
-	cleanup_before_linux();
 #ifdef CONFIG_U_QE
 	u_qe_resume();
 #endif
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c
index 9dc5402..26cf517 100644
--- a/board/freescale/common/fman.c
+++ b/board/freescale/common/fman.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2015 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -10,7 +10,11 @@
 #include <fdt_support.h>
 
 #include <fm_eth.h>
+#ifdef CONFIG_FSL_LAYERSCAPE
+#include <asm/arch/fsl_serdes.h>
+#else
 #include <asm/fsl_serdes.h>
+#endif
 
 /*
  * Given the following ...
diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c
index 5283648..73b6718 100644
--- a/board/freescale/common/fsl_validate.c
+++ b/board/freescale/common/fsl_validate.c
@@ -63,12 +63,12 @@ static u32 check_ie(struct fsl_secboot_img_priv *img)
  * address
  */
 #if defined(CONFIG_MPC85xx)
-int get_csf_base_addr(ulong *csf_addr, ulong *flash_base_addr)
+int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]);
 	u32 csf_flash_offset = csf_hdr_addr & ~(CONFIG_SYS_PBI_FLASH_BASE);
-	ulong flash_addr, addr;
+	u32 flash_addr, addr;
 	int found = 0;
 	int i = 0;
 
@@ -76,7 +76,7 @@ int get_csf_base_addr(ulong *csf_addr, ulong *flash_base_addr)
 		flash_addr = flash_info[i].start[0];
 		addr = flash_info[i].start[0] + csf_flash_offset;
 		if (memcmp((u8 *)addr, barker_code, ESBC_BARKER_LEN) == 0) {
-			debug("Barker found on addr %lx\n", addr);
+			debug("Barker found on addr %x\n", addr);
 			found = 1;
 			break;
 		}
@@ -94,7 +94,7 @@ int get_csf_base_addr(ulong *csf_addr, ulong *flash_base_addr)
 /* For platforms like LS1020, correct flash address is present in
  * the header. So the function reqturns flash base address as 0
  */
-int get_csf_base_addr(ulong *csf_addr, ulong *flash_base_addr)
+int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 	u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]);
@@ -108,11 +108,11 @@ int get_csf_base_addr(ulong *csf_addr, ulong *flash_base_addr)
 }
 #endif
 
-static int get_ie_info_addr(ulong *ie_addr)
+static int get_ie_info_addr(u32 *ie_addr)
 {
 	struct fsl_secboot_img_hdr *hdr;
 	struct fsl_secboot_sg_table *sg_tbl;
-	ulong flash_base_addr, csf_addr;
+	u32 flash_base_addr, csf_addr;
 
 	if (get_csf_base_addr(&csf_addr, &flash_base_addr))
 		return -1;
@@ -127,11 +127,11 @@ static int get_ie_info_addr(ulong *ie_addr)
 	 */
 #if defined(CONFIG_FSL_TRUST_ARCH_v1) && defined(CONFIG_FSL_CORENET)
 	sg_tbl = (struct fsl_secboot_sg_table *)
-		 (((ulong)hdr->psgtable & ~(CONFIG_SYS_PBI_FLASH_BASE)) +
+		 (((u32)hdr->psgtable & ~(CONFIG_SYS_PBI_FLASH_BASE)) +
 		  flash_base_addr);
 #else
 	sg_tbl = (struct fsl_secboot_sg_table *)(csf_addr +
-						 (ulong)hdr->psgtable);
+						 (u32)hdr->psgtable);
 #endif
 
 	/* IE Key Table is the first entry in the SG Table */
@@ -142,7 +142,7 @@ static int get_ie_info_addr(ulong *ie_addr)
 	*ie_addr = sg_tbl->src_addr;
 #endif
 
-	debug("IE Table address is %lx\n", *ie_addr);
+	debug("IE Table address is %x\n", *ie_addr);
 	return 0;
 }
 
@@ -246,7 +246,7 @@ static void fsl_secboot_image_verification_failure(void)
 	struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR);
 	u32 sts = sec_mon_in32(&sec_mon_regs->hp_stat);
 
-	u32 its = sfp_in32(&sfp_regs->ospr) & ITS_MASK >> ITS_BIT;
+	u32 its = (sfp_in32(&sfp_regs->ospr) & ITS_MASK) >> ITS_BIT;
 
 	/*
 	 * Read the SEC_MON status register
@@ -549,7 +549,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img)
 	if (memcmp(hdr->barker, barker_code, ESBC_BARKER_LEN))
 		return ERROR_ESBC_CLIENT_HEADER_BARKER;
 
-	sprintf(buf, "%p", hdr->pimg);
+	sprintf(buf, "%x", hdr->pimg);
 	setenv("img_addr", buf);
 
 	if (!hdr->img_size)
diff --git a/board/freescale/common/ns_access.c b/board/freescale/common/ns_access.c
index d7de982..d8d16c5 100644
--- a/board/freescale/common/ns_access.c
+++ b/board/freescale/common/ns_access.c
@@ -6,9 +6,10 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <fsl_csu.h>
 #include <asm/arch/ns_access.h>
 
-void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
 {
 	u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
 	u32 *reg;
@@ -28,3 +29,8 @@ void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
 		out_be32(reg, val);
 	}
 }
+
+void enable_layerscape_ns_access(void)
+{
+	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+}
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 51ce9c3..0aa56a0 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -125,8 +125,13 @@ void qixis_write_i2c(unsigned int reg, u8 value);
 #define QIXIS_ESDHC_ADAPTER_TYPE_MMC            0x5	/* MMC Card */
 #define QIXIS_ESDHC_ADAPTER_TYPE_SD             0x6	/* SD Card Rev2.0 3.0 */
 #define QIXIS_ESDHC_NO_ADAPTER                  0x7	/* No Card is Present*/
+
 #define QIXIS_SDCLKIN		0x08
 #define QIXIS_SDCLKOUT		0x02
+#define QIXIS_DAT5_6_7		0X02
+#define QIXIS_DAT4		0X01
+
+#define QIXIS_EVDD_BY_SDHC_VS	0x0c
 #endif
 
 #endif
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
index 396103f..172a55b 100644
--- a/board/freescale/corenet_ds/eth_hydra.c
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -55,7 +55,7 @@
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <fdt_support.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 #include "../common/ngpixis.h"
 #include "../common/fman.h"
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
index 5cbec7f..c68dc2c 100644
--- a/board/freescale/corenet_ds/eth_p4080.c
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -24,7 +24,7 @@
 
 #include "../common/ngpixis.h"
 #include "../common/fman.h"
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 #define EMI_NONE	0xffffffff
 #define EMI_MASK	0xf0000000
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
index ad1bffd..62b1635 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -55,7 +55,7 @@
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <fdt_support.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 #include "../common/ngpixis.h"
 #include "../common/fman.h"
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 655fc64..d889ad5 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -8,13 +8,14 @@
 #include <i2c.h>
 #include <asm/io.h>
 #include <asm/arch/immap_ls102xa.h>
-#include <asm/arch/ns_access.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/ls102xa_stream_id.h>
 #include <asm/arch/ls102xa_devdis.h>
+#include <asm/arch/ls102xa_sata.h>
 #include <hwconfig.h>
 #include <mmc.h>
+#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_sec.h>
@@ -56,92 +57,6 @@ enum {
 	GE1_CLK125,
 };
 
-#ifdef CONFIG_LS102XA_NS_ACCESS
-static struct csu_ns_dev ns_dev[] = {
-	{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
-	{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
-	{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
-	{ CSU_CSLX_OCRAM, CSU_ALL_RW },
-	{ CSU_CSLX_GIC, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE1, CSU_ALL_RW },
-	{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
-	{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE2, CSU_ALL_RW },
-	{ CSU_CSLX_SATA, CSU_ALL_RW },
-	{ CSU_CSLX_USB3, CSU_ALL_RW },
-	{ CSU_CSLX_SERDES, CSU_ALL_RW },
-	{ CSU_CSLX_QDMA, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART2, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART1, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART4, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART3, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART6, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART5, CSU_ALL_RW },
-	{ CSU_CSLX_DSPI2, CSU_ALL_RW },
-	{ CSU_CSLX_DSPI1, CSU_ALL_RW },
-	{ CSU_CSLX_QSPI, CSU_ALL_RW },
-	{ CSU_CSLX_ESDHC, CSU_ALL_RW },
-	{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
-	{ CSU_CSLX_IFC, CSU_ALL_RW },
-	{ CSU_CSLX_I2C1, CSU_ALL_RW },
-	{ CSU_CSLX_USB2, CSU_ALL_RW },
-	{ CSU_CSLX_I2C3, CSU_ALL_RW },
-	{ CSU_CSLX_I2C2, CSU_ALL_RW },
-	{ CSU_CSLX_DUART2, CSU_ALL_RW },
-	{ CSU_CSLX_DUART1, CSU_ALL_RW },
-	{ CSU_CSLX_WDT2, CSU_ALL_RW },
-	{ CSU_CSLX_WDT1, CSU_ALL_RW },
-	{ CSU_CSLX_EDMA, CSU_ALL_RW },
-	{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
-	{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
-	{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
-	{ CSU_CSLX_DDR, CSU_ALL_RW },
-	{ CSU_CSLX_QUICC, CSU_ALL_RW },
-	{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
-	{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
-	{ CSU_CSLX_SFP, CSU_ALL_RW },
-	{ CSU_CSLX_TMU, CSU_ALL_RW },
-	{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
-	{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO2, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO1, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO4, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO3, CSU_ALL_RW },
-	{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
-	{ CSU_CSLX_CSU, CSU_ALL_RW },
-	{ CSU_CSLX_ASRC, CSU_ALL_RW },
-	{ CSU_CSLX_SPDIF, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
-	{ CSU_CSLX_SAI2, CSU_ALL_RW },
-	{ CSU_CSLX_SAI1, CSU_ALL_RW },
-	{ CSU_CSLX_SAI4, CSU_ALL_RW },
-	{ CSU_CSLX_SAI3, CSU_ALL_RW },
-	{ CSU_CSLX_FTM2, CSU_ALL_RW },
-	{ CSU_CSLX_FTM1, CSU_ALL_RW },
-	{ CSU_CSLX_FTM4, CSU_ALL_RW },
-	{ CSU_CSLX_FTM3, CSU_ALL_RW },
-	{ CSU_CSLX_FTM6, CSU_ALL_RW },
-	{ CSU_CSLX_FTM5, CSU_ALL_RW },
-	{ CSU_CSLX_FTM8, CSU_ALL_RW },
-	{ CSU_CSLX_FTM7, CSU_ALL_RW },
-	{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
-	{ CSU_CSLX_EPU, CSU_ALL_RW },
-	{ CSU_CSLX_GDI, CSU_ALL_RW },
-	{ CSU_CSLX_DDI, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
-	{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
-};
-#endif
-
 int checkboard(void)
 {
 #ifndef CONFIG_QSPI_BOOT
@@ -382,9 +297,8 @@ void board_init_f(ulong dummy)
 	dram_init();
 
 	/* Allow OCRAM access permission as R/W */
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(&ns_dev[4], 1);
-	enable_devices_ns_access(&ns_dev[7], 1);
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
 #endif
 
 	board_init_r(NULL, 0);
@@ -494,6 +408,17 @@ int config_serdes_mux(void)
 	return 0;
 }
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_SCSI_AHCI_PLAT
+	ls1021a_sata_init();
+#endif
+
+	return 0;
+}
+#endif
+
 int misc_init_r(void)
 {
 	int conflict_flag;
@@ -602,8 +527,8 @@ int board_init(void)
 	ls102xa_config_smmu_stream_id(dev_stream_id,
 				      ARRAY_SIZE(dev_stream_id));
 
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
 #endif
 
 #ifdef CONFIG_U_QE
@@ -627,8 +552,8 @@ void board_sleep_prepare(void)
 	}
 
 
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
 #endif
 }
 #endif
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index e9f6f0a..b997bb0 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -6,5 +6,6 @@ F:	include/configs/ls1021atwr.h
 F:	configs/ls1021atwr_nor_defconfig
 F:	configs/ls1021atwr_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021atwr_nor_lpuart_defconfig
-F:	configs/ls1021atwr_sdcard_defconfig
+F:	configs/ls1021atwr_sdcard_ifc_defconfig
+F:	configs/ls1021atwr_sdcard_qspi_defconfig
 F:	configs/ls1021atwr_qspi_defconfig
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 228dbf8..4918c11 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -8,13 +8,14 @@
 #include <i2c.h>
 #include <asm/io.h>
 #include <asm/arch/immap_ls102xa.h>
-#include <asm/arch/ns_access.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/ls102xa_stream_id.h>
 #include <asm/arch/ls102xa_devdis.h>
+#include <asm/arch/ls102xa_sata.h>
 #include <hwconfig.h>
 #include <mmc.h>
+#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_immap.h>
@@ -69,92 +70,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PIN_QE_LCD_MUX_LCD	0x0
 #define PIN_QE_LCD_MUX_QE	0x1
 
-#ifdef CONFIG_LS102XA_NS_ACCESS
-static struct csu_ns_dev ns_dev[] = {
-	{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
-	{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
-	{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
-	{ CSU_CSLX_OCRAM, CSU_ALL_RW },
-	{ CSU_CSLX_GIC, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE1, CSU_ALL_RW },
-	{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
-	{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
-	{ CSU_CSLX_PCIE2, CSU_ALL_RW },
-	{ CSU_CSLX_SATA, CSU_ALL_RW },
-	{ CSU_CSLX_USB3, CSU_ALL_RW },
-	{ CSU_CSLX_SERDES, CSU_ALL_RW },
-	{ CSU_CSLX_QDMA, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART2, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART1, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART4, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART3, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART6, CSU_ALL_RW },
-	{ CSU_CSLX_LPUART5, CSU_ALL_RW },
-	{ CSU_CSLX_DSPI2, CSU_ALL_RW },
-	{ CSU_CSLX_DSPI1, CSU_ALL_RW },
-	{ CSU_CSLX_QSPI, CSU_ALL_RW },
-	{ CSU_CSLX_ESDHC, CSU_ALL_RW },
-	{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
-	{ CSU_CSLX_IFC, CSU_ALL_RW },
-	{ CSU_CSLX_I2C1, CSU_ALL_RW },
-	{ CSU_CSLX_USB2, CSU_ALL_RW },
-	{ CSU_CSLX_I2C3, CSU_ALL_RW },
-	{ CSU_CSLX_I2C2, CSU_ALL_RW },
-	{ CSU_CSLX_DUART2, CSU_ALL_RW },
-	{ CSU_CSLX_DUART1, CSU_ALL_RW },
-	{ CSU_CSLX_WDT2, CSU_ALL_RW },
-	{ CSU_CSLX_WDT1, CSU_ALL_RW },
-	{ CSU_CSLX_EDMA, CSU_ALL_RW },
-	{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
-	{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
-	{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
-	{ CSU_CSLX_DDR, CSU_ALL_RW },
-	{ CSU_CSLX_QUICC, CSU_ALL_RW },
-	{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
-	{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
-	{ CSU_CSLX_SFP, CSU_ALL_RW },
-	{ CSU_CSLX_TMU, CSU_ALL_RW },
-	{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
-	{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
-	{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO2, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO1, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO4, CSU_ALL_RW },
-	{ CSU_CSLX_GPIO3, CSU_ALL_RW },
-	{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
-	{ CSU_CSLX_CSU, CSU_ALL_RW },
-	{ CSU_CSLX_ASRC, CSU_ALL_RW },
-	{ CSU_CSLX_SPDIF, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
-	{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
-	{ CSU_CSLX_SAI2, CSU_ALL_RW },
-	{ CSU_CSLX_SAI1, CSU_ALL_RW },
-	{ CSU_CSLX_SAI4, CSU_ALL_RW },
-	{ CSU_CSLX_SAI3, CSU_ALL_RW },
-	{ CSU_CSLX_FTM2, CSU_ALL_RW },
-	{ CSU_CSLX_FTM1, CSU_ALL_RW },
-	{ CSU_CSLX_FTM4, CSU_ALL_RW },
-	{ CSU_CSLX_FTM3, CSU_ALL_RW },
-	{ CSU_CSLX_FTM6, CSU_ALL_RW },
-	{ CSU_CSLX_FTM5, CSU_ALL_RW },
-	{ CSU_CSLX_FTM8, CSU_ALL_RW },
-	{ CSU_CSLX_FTM7, CSU_ALL_RW },
-	{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
-	{ CSU_CSLX_EPU, CSU_ALL_RW },
-	{ CSU_CSLX_GDI, CSU_ALL_RW },
-	{ CSU_CSLX_DDI, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
-	{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
-	{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
-};
-#endif
-
 struct cpld_data {
 	u8 cpld_ver;		/* cpld revision */
 	u8 cpld_ver_sub;	/* cpld sub revision */
@@ -175,7 +90,7 @@ struct cpld_data {
 	u8 rev2;		/* Reserved */
 };
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 static void convert_serdes_mux(int type, int need_reset);
 
 void cpld_show(void)
@@ -216,7 +131,7 @@ void cpld_show(void)
 int checkboard(void)
 {
 	puts("Board: LS1021ATWR\n");
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	cpld_show();
 #endif
 
@@ -380,7 +295,7 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 int config_serdes_mux(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -414,7 +329,7 @@ int config_serdes_mux(void)
 }
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 int config_board_mux(void)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -521,8 +436,10 @@ int board_early_init_f(void)
 	}
 
 #if defined(CONFIG_DEEP_SLEEP)
-	if (is_warm_boot())
-		fsl_dp_disable_console();
+	if (is_warm_boot()) {
+		timer_init();
+		dram_init();
+	}
 #endif
 
 	return 0;
@@ -531,6 +448,8 @@ int board_early_init_f(void)
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
 {
+	void (*second_uboot)(void);
+
 	/* Clear the BSS */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -546,11 +465,22 @@ void board_init_f(ulong dummy)
 	dram_init();
 
 	/* Allow OCRAM access permission as R/W */
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(&ns_dev[4], 1);
-	enable_devices_ns_access(&ns_dev[7], 1);
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+	enable_layerscape_ns_access();
 #endif
 
+	/*
+	 * if it is woken up from deep sleep, then jump to second
+	 * stage uboot and continue executing without recopying
+	 * it from SD since it has already been reserved in memeory
+	 * in last boot.
+	 */
+	if (is_warm_boot()) {
+		second_uboot = (void (*)(void))CONFIG_SYS_TEXT_BASE;
+		second_uboot();
+	}
+
 	board_init_r(NULL, 0);
 }
 #endif
@@ -627,7 +557,7 @@ int board_init(void)
 {
 #ifndef CONFIG_SYS_FSL_NO_SERDES
 	fsl_serdes_init();
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	config_serdes_mux();
 #endif
 #endif
@@ -637,8 +567,8 @@ int board_init(void)
 	ls102xa_config_smmu_stream_id(dev_stream_id,
 				      ARRAY_SIZE(dev_stream_id));
 
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
 #endif
 
 #ifdef CONFIG_U_QE
@@ -651,13 +581,24 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_SCSI_AHCI_PLAT
+	ls1021a_sata_init();
+#endif
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_MISC_INIT_R)
 int misc_init_r(void)
 {
 #ifdef CONFIG_FSL_DEVICE_DISABLE
 	device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl));
 #endif
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	config_board_mux();
 #endif
 
@@ -670,8 +611,8 @@ int misc_init_r(void)
 #if defined(CONFIG_DEEP_SLEEP)
 void board_sleep_prepare(void)
 {
-#ifdef CONFIG_LS102XA_NS_ACCESS
-	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
 #endif
 }
 #endif
@@ -706,7 +647,7 @@ u16 flash_read16(void *addr)
 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 }
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 static void convert_flash_bank(char bank)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
deleted file mode 100644
index 9c3e3b0..0000000
--- a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 01ee0100
-
-#enable IFC, disable QSPI and DSPI
-0608000a 00000000 00000000 00000000
-20000000 00407900 60040a00 21046000
-00000000 00000000 00000000 00038000
-00080000 881b7340 00000000 00000000
-
-#disable IFC, enable QSPI and DSPI
-#0608000a 00000000 00000000 00000000
-#20000000 00407900 60040a00 21046000
-#00000000 00000000 00000000 00038000
-#20084800 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
new file mode 100644
index 0000000..205606f
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+30000000 00007900 60040a00 21046000
+00000000 00000000 00000000 20000000
+00080000 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
new file mode 100644
index 0000000..6767e09
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#disable IFC, enable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+30000000 00007900 60040a00 21046000
+00000000 00000000 00000000 20000000
+20024800 881b7340 00000000 00000000
diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
new file mode 100644
index 0000000..51818ec
--- /dev/null
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -0,0 +1,16 @@
+
+if TARGET_LS1043ARDB
+
+config SYS_BOARD
+	default "ls1043ardb"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1043ardb"
+
+endif
diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS
new file mode 100644
index 0000000..efca5bf
--- /dev/null
+++ b/board/freescale/ls1043ardb/MAINTAINERS
@@ -0,0 +1,9 @@
+LS1043A BOARD
+M:	Mingkai Hu <Mingkai.hu@freescale.com>
+S:	Maintained
+F:	board/freescale/ls1043ardb/
+F:	board/freescale/ls1043ardb/ls1043ardb.c
+F:	include/configs/ls1043ardb.h
+F:	configs/ls1043ardb_defconfig
+F:	configs/ls1043ardb_nand_defconfig
+F:	configs/ls1043ardb_sdcard_defconfig
diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile
new file mode 100644
index 0000000..5fe1cc9
--- /dev/null
+++ b/board/freescale/ls1043ardb/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright 2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += cpld.o
+obj-y += ddr.o
+obj-y += ls1043ardb.o
+obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o
diff --git a/board/freescale/ls1043ardb/README b/board/freescale/ls1043ardb/README
new file mode 100644
index 0000000..0556e73
--- /dev/null
+++ b/board/freescale/ls1043ardb/README
@@ -0,0 +1,87 @@
+Overview
+--------
+The LS1043A Reference Design Board (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS1043A
+LayerScape Architecture processor. The LS1043ARDB provides SW development
+platform for the Freescale LS1043A processor series, with a complete
+debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
+
+LS1043A SoC Overview
+--------------------
+The LS1043A integrated multicore processor combines four ARM Cortex-A53
+processor cores with datapath acceleration optimized for L2/3 packet
+processing, single pass security offload and robust traffic management
+and quality of service.
+
+The LS1043A SoC includes the following function and features:
+ - Four 64-bit ARM Cortex-A53 CPUs
+ - 1 MB unified L2 Cache
+ - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
+   support
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
+   the following functions:
+   - Packet parsing, classification, and distribution (FMan)
+   - Queue management for scheduling, packet sequencing, and congestion
+     management (QMan)
+   - Hardware buffer management for buffer allocation and de-allocation (BMan)
+   - Cryptography acceleration (SEC)
+ - Ethernet interfaces by FMan
+   - Up to 1 x XFI supporting 10G interface
+   - Up to 1 x QSGMII
+   - Up to 4 x SGMII supporting 1000Mbps
+   - Up to 2 x SGMII supporting 2500Mbps
+   - Up to 2 x RGMII supporting 1000Mbps
+ - High-speed peripheral interfaces
+   - Three PCIe 2.0 controllers, one supporting x4 operation
+   - One serial ATA (SATA 3.0) controllers
+ - Additional peripheral interfaces
+   - Three high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Serial peripheral interface (SPI) controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller supporting NAND and NOR flash
+ - QorIQ platform's trust architecture 2.1
+
+ LS1043ARDB board Overview
+ -----------------------
+ - SERDES Connections, 4 lanes supporting:
+      - PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and
+        standard PCIe card
+      - QSGMII with x4 RJ45 connector
+      - XFI with x1 RJ45 connector
+ - DDR Controller
+     - 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s
+ -IFC/Local Bus
+    - One 128MB NOR flash 16-bit data bus
+    - One 512 MB NAND flash with ECC support
+    - CPLD connection
+ - USB 3.0
+    - Two super speed USB 3.0 Type A ports
+ - SDHC: connects directly to a full SD/MMC slot
+ - DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 4 I2C controllers
+ - UART
+   - Two 4-pin serial ports at up to 115.2 Kbit/s
+   - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+Start Address	End Address	Description		Size
+0x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
+0x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
+0x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
+0x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
+0x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
+0x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
+0x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
+0x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
+0x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB
+
+Booting Options
+---------------
+a) NOR boot
+b) NAND boot
+c) SD boot
diff --git a/board/freescale/ls1043ardb/cpld.c b/board/freescale/ls1043ardb/cpld.c
new file mode 100644
index 0000000..78c2824
--- /dev/null
+++ b/board/freescale/ls1043ardb/cpld.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Freescale LS1043ARDB board-specific CPLD controlling supports.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include "cpld.h"
+
+u8 cpld_read(unsigned int reg)
+{
+	void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+	return in_8(p + reg);
+}
+
+void cpld_write(unsigned int reg, u8 value)
+{
+	void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+	out_8(p + reg, value);
+}
+
+/* Set the boot bank to the alternate bank */
+void cpld_set_altbank(void)
+{
+	u8 reg4 = CPLD_READ(soft_mux_on);
+	u8 reg7 = CPLD_READ(vbank);
+
+	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL);
+
+	reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
+	CPLD_WRITE(vbank, reg7);
+
+	CPLD_WRITE(system_rst, 1);
+}
+
+/* Set the boot bank to the default bank */
+void cpld_set_defbank(void)
+{
+	CPLD_WRITE(global_rst, 1);
+}
+
+void cpld_set_nand(void)
+{
+	u16 reg = CPLD_CFG_RCW_SRC_NAND;
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
+
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
+
+	CPLD_WRITE(system_rst, 1);
+}
+
+void cpld_set_sd(void)
+{
+	u16 reg = CPLD_CFG_RCW_SRC_SD;
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
+
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
+
+	CPLD_WRITE(system_rst, 1);
+}
+#ifdef DEBUG
+static void cpld_dump_regs(void)
+{
+	printf("cpld_ver	= %x\n", CPLD_READ(cpld_ver));
+	printf("cpld_ver_sub	= %x\n", CPLD_READ(cpld_ver_sub));
+	printf("pcba_ver	= %x\n", CPLD_READ(pcba_ver));
+	printf("soft_mux_on	= %x\n", CPLD_READ(soft_mux_on));
+	printf("cfg_rcw_src1	= %x\n", CPLD_READ(cfg_rcw_src1));
+	printf("cfg_rcw_src2	= %x\n", CPLD_READ(cfg_rcw_src2));
+	printf("vbank		= %x\n", CPLD_READ(vbank));
+	printf("sysclk_sel	= %x\n", CPLD_READ(sysclk_sel));
+	printf("uart_sel	= %x\n", CPLD_READ(uart_sel));
+	printf("sd1refclk_sel	= %x\n", CPLD_READ(sd1refclk_sel));
+	printf("tdmclk_mux_sel	= %x\n", CPLD_READ(tdmclk_mux_sel));
+	printf("sdhc_spics_sel	= %x\n", CPLD_READ(sdhc_spics_sel));
+	printf("status_led	= %x\n", CPLD_READ(status_led));
+	putc('\n');
+}
+#endif
+
+void cpld_rev_bit(unsigned char *value)
+{
+	u8 rev_val, val;
+	int i;
+
+	val = *value;
+	rev_val = val & 1;
+	for (i = 1; i <= 7; i++) {
+		val >>= 1;
+		rev_val <<= 1;
+		rev_val |= val & 1;
+	}
+
+	*value = rev_val;
+}
+
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int rc = 0;
+
+	if (argc <= 1)
+		return cmd_usage(cmdtp);
+
+	if (strcmp(argv[1], "reset") == 0) {
+		if (strcmp(argv[2], "altbank") == 0)
+			cpld_set_altbank();
+		else if (strcmp(argv[2], "nand") == 0)
+			cpld_set_nand();
+		else if (strcmp(argv[2], "sd") == 0)
+			cpld_set_sd();
+		else
+			cpld_set_defbank();
+#ifdef DEBUG
+	} else if (strcmp(argv[1], "dump") == 0) {
+		cpld_dump_regs();
+#endif
+	} else {
+		rc = cmd_usage(cmdtp);
+	}
+
+	return rc;
+}
+
+U_BOOT_CMD(
+	cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
+	"Reset the board or alternate bank",
+	"reset: reset to default bank\n"
+	"cpld reset altbank: reset to alternate bank\n"
+	"cpld reset nand: reset to boot from NAND flash\n"
+	"cpld reset sd: reset to boot from SD card\n"
+#ifdef DEBUG
+	"cpld dump - display the CPLD registers\n"
+#endif
+);
diff --git a/board/freescale/ls1043ardb/cpld.h b/board/freescale/ls1043ardb/cpld.h
new file mode 100644
index 0000000..bd59c0e
--- /dev/null
+++ b/board/freescale/ls1043ardb/cpld.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CPLD_H__
+#define __CPLD_H__
+
+/*
+ * CPLD register set of LS1043ARDB board-specific.
+ */
+struct cpld_data {
+	u8 cpld_ver;		/* 0x0 - CPLD Major Revision Register */
+	u8 cpld_ver_sub;	/* 0x1 - CPLD Minor Revision Register */
+	u8 pcba_ver;		/* 0x2 - PCBA Revision Register */
+	u8 system_rst;		/* 0x3 - system reset register */
+	u8 soft_mux_on;		/* 0x4 - Switch Control Enable Register */
+	u8 cfg_rcw_src1;	/* 0x5 - Reset config word 1 */
+	u8 cfg_rcw_src2;	/* 0x6 - Reset config word 1 */
+	u8 vbank;		/* 0x7 - Flash bank selection Control */
+	u8 sysclk_sel;		/* 0x8 - */
+	u8 uart_sel;		/* 0x9 - */
+	u8 sd1refclk_sel;	/* 0xA - */
+	u8 tdmclk_mux_sel;	/* 0xB - */
+	u8 sdhc_spics_sel;	/* 0xC - */
+	u8 status_led;		/* 0xD - */
+	u8 global_rst;		/* 0xE - */
+};
+
+u8 cpld_read(unsigned int reg);
+void cpld_write(unsigned int reg, u8 value);
+void cpld_rev_bit(unsigned char *value);
+
+#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
+#define CPLD_WRITE(reg, value)  \
+	cpld_write(offsetof(struct cpld_data, reg), value)
+
+/* CPLD on IFC */
+#define CPLD_SW_MUX_BANK_SEL	0x40
+#define CPLD_BANK_SEL_MASK	0x07
+#define CPLD_BANK_SEL_ALTBANK	0x04
+#define CPLD_CFG_RCW_SRC_NAND	0x106
+#define CPLD_CFG_RCW_SRC_SD	0x040
+#endif
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
new file mode 100644
index 0000000..b181579
--- /dev/null
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include "ddr.h"
+#ifdef CONFIG_FSL_DEEP_SLEEP
+#include <fsl_sleep.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			   dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 1) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	pbsp = udimms[0];
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->cpo_override = pbsp->cpo_override;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found for %lu MT/s\n",
+		       ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+	      pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+
+	/* force DDR bus width to 32 bits */
+	popts->data_bus_width = 1;
+	popts->otf_burst_chop_en = 0;
+	popts->burst_length = DDR_BL8;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 1;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+			  DDR_CDR2_VREF_OVRD(70);	/* Vref = 70% */
+}
+
+/* DDR model number: MT40A512M8HX-093E */
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 1,
+	.rank_density = 2147483648u,
+	.capacity = 2147483648u,
+	.primary_sdram_width = 32,
+	.ec_sdram_width = 0,
+	.registered_dimm = 0,
+	.mirrored_dimm = 0,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.bank_addr_bits = 0,
+	.bank_group_bits = 2,
+	.edc_config = 0,
+	.burst_lengths_bitmask = 0x0c,
+
+	.tckmin_x_ps = 938,
+	.tckmax_ps = 1500,
+	.caslat_x = 0x000DFA00,
+	.taa_ps = 13500,
+	.trcd_ps = 13500,
+	.trp_ps = 13500,
+	.tras_ps = 33000,
+	.trc_ps = 46500,
+	.trfc1_ps = 260000,
+	.trfc2_ps = 160000,
+	.trfc4_ps = 110000,
+	.tfaw_ps = 21000,
+	.trrds_ps = 3700,
+	.trrdl_ps = 5300,
+	.tccdl_ps = 5355,
+	.refresh_rate_ps = 7800000,
+	.dq_mapping[0] = 0x0,
+	.dq_mapping[1] = 0x0,
+	.dq_mapping[2] = 0x0,
+	.dq_mapping[3] = 0x0,
+	.dq_mapping[4] = 0x0,
+	.dq_mapping[5] = 0x0,
+	.dq_mapping[6] = 0x0,
+	.dq_mapping[7] = 0x0,
+	.dq_mapping[8] = 0x0,
+	.dq_mapping[9] = 0x0,
+	.dq_mapping[10] = 0x0,
+	.dq_mapping[11] = 0x0,
+	.dq_mapping[12] = 0x0,
+	.dq_mapping[13] = 0x0,
+	.dq_mapping[14] = 0x0,
+	.dq_mapping[15] = 0x0,
+	.dq_mapping[16] = 0x0,
+	.dq_mapping[17] = 0x0,
+	.dq_mapping_ors = 0,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+			    unsigned int controller_number,
+			    unsigned int dimm_number)
+{
+	static const char dimm_model[] = "Fixed DDR on board";
+
+	if (((controller_number == 0) && (dimm_number == 0)) ||
+	    ((controller_number == 1) && (dimm_number == 0))) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+#endif
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
+	puts("Initializing DDR....\n");
+	dram_size = fsl_ddr_sdram();
+#else
+	dram_size =  fsl_ddr_sdram_size();
+#endif
+#ifdef CONFIG_FSL_DEEP_SLEEP
+	fsl_dp_ddr_restore();
+#endif
+
+	return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
diff --git a/board/freescale/ls1043ardb/ddr.h b/board/freescale/ls1043ardb/ddr.h
new file mode 100644
index 0000000..b17eb80
--- /dev/null
+++ b/board/freescale/ls1043ardb/ddr.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo_override;
+	u32 write_data_delay;
+	u32 force_2t;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+#ifdef CONFIG_SYS_FSL_DDR4
+	{1,  1666, 0, 6,     7, 0x07090800, 0x00000000,},
+	{1,  1900, 0, 6,     7, 0x07090800, 0x00000000,},
+	{1,  2200, 0, 6,     7, 0x07090800, 0x00000000,},
+#endif
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+#endif
diff --git a/board/freescale/ls1043ardb/eth.c b/board/freescale/ls1043ardb/eth.c
new file mode 100644
index 0000000..61f2b5d
--- /dev/null
+++ b/board/freescale/ls1043ardb/eth.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_dtsec.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+
+#include "../common/fman.h"
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	int i;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	struct mii_dev *dev;
+	u32 srds_s1;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+			FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+	srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Set the two on-board RGMII PHY address */
+	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+	/* QSGMII on lane B, MAC 1/2/5/6 */
+	fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR);
+
+	switch (srds_s1) {
+	case 0x1455:
+		break;
+	default:
+		printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n",
+		       srds_s1);
+		break;
+	}
+
+	dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++)
+		fm_info_set_mdio(i, dev);
+
+	/* XFI on lane A, MAC 9 */
+	fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+	dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+	fm_info_set_mdio(FM1_10GEC1, dev);
+
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
new file mode 100644
index 0000000..9032ed3
--- /dev/null
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <ahci.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fm_eth.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <fsl_ifc.h>
+#include "cpld.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	static const char *freq[3] = {"100.00MHZ", "156.25MHZ"};
+#ifndef CONFIG_SD_BOOT
+	u8 cfg_rcw_src1, cfg_rcw_src2;
+	u32 cfg_rcw_src;
+#endif
+	u32 sd1refclk_sel;
+
+	printf("Board: LS1043ARDB, boot from ");
+
+#ifdef CONFIG_SD_BOOT
+	puts("SD\n");
+#else
+	cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
+	cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
+	cpld_rev_bit(&cfg_rcw_src1);
+	cfg_rcw_src = cfg_rcw_src1;
+	cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
+
+	if (cfg_rcw_src == 0x25)
+		printf("vBank %d\n", CPLD_READ(vbank));
+	else if (cfg_rcw_src == 0x106)
+		puts("NAND\n");
+	else
+		printf("Invalid setting of SW4\n");
+#endif
+
+	printf("CPLD:  V%x.%x\nPCBA:  V%x.0\n", CPLD_READ(cpld_ver),
+	       CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
+
+	puts("SERDES Reference Clocks:\n");
+	sd1refclk_sel = CPLD_READ(sd1refclk_sel);
+	printf("SD1_CLK1 = %s, SD1_CLK2 = %s\n", freq[sd1refclk_sel], freq[0]);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = initdram(0);
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+	return 0;
+}
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+
+	/*
+	 * Set CCI-400 control override register to enable barrier
+	 * transaction
+	 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_FSL_IFC
+	init_final_memctl_regs();
+#endif
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+	return 0;
+}
+
+int config_board_mux(void)
+{
+	return 0;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+int misc_init_r(void)
+{
+	config_board_mux();
+
+	return 0;
+}
+#endif
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+#endif
+	return 0;
+}
+
+u8 flash_read8(void *addr)
+{
+	return __raw_readb(addr + 1);
+}
+
+void flash_write16(u16 val, void *addr)
+{
+	u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+
+	__raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+	u16 val = __raw_readw(addr);
+
+	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
diff --git a/board/freescale/ls1043ardb/ls1043ardb_pbi.cfg b/board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
new file mode 100644
index 0000000..f072274
--- /dev/null
+++ b/board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
@@ -0,0 +1,14 @@
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Alt base register
+09570158 00001000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#flush PBI data
+096100c0 000fffff
diff --git a/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg b/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
new file mode 100644
index 0000000..935ffc0
--- /dev/null
+++ b/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+0810000f 0c000000 00000000 00000000
+14550002 80004012 e0106000 61002000
+00000000 00000000 00000000 00038800
+00000000 00001100 00000096 00000001
diff --git a/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
new file mode 100644
index 0000000..28cd958
--- /dev/null
+++ b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0810000f 0c000000 00000000 00000000
+14550002 80004012 60040000 61002000
+00000000 00000000 00000000 00038800
+00000000 00001100 00000096 00000001
diff --git a/board/freescale/ls2085a/Kconfig b/board/freescale/ls2085a/Kconfig
index f51afc82..042f85b 100644
--- a/board/freescale/ls2085a/Kconfig
+++ b/board/freescale/ls2085a/Kconfig
@@ -7,7 +7,7 @@ config SYS_VENDOR
 	default "freescale"
 
 config SYS_SOC
-	default "fsl-lsch3"
+	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
 	default "ls2085a_emu"
@@ -23,7 +23,7 @@ config SYS_VENDOR
 	default "freescale"
 
 config SYS_SOC
-	default "fsl-lsch3"
+	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
 	default "ls2085a_simu"
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index 73c4410..27481e2 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -15,7 +15,7 @@
 #include <fsl_debug_server.h>
 #include <fsl-mc/fsl_mc.h>
 #include <environment.h>
-#include <asm/arch-fsl-lsch3/soc.h>
+#include <asm/arch/soc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/board/freescale/ls2085aqds/Kconfig b/board/freescale/ls2085aqds/Kconfig
index deb640d..8d6acba 100644
--- a/board/freescale/ls2085aqds/Kconfig
+++ b/board/freescale/ls2085aqds/Kconfig
@@ -8,7 +8,7 @@ config SYS_VENDOR
 	default "freescale"
 
 config SYS_SOC
-	default "fsl-lsch3"
+	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
 	default "ls2085aqds"
diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2085aqds/eth.c
index 007b433..b8a2bf4 100644
--- a/board/freescale/ls2085aqds/eth.c
+++ b/board/freescale/ls2085aqds/eth.c
@@ -8,7 +8,6 @@
 #include <netdev.h>
 #include <asm/io.h>
 #include <asm/arch/fsl_serdes.h>
-#include <asm/arch-fsl-lsch3/immap_lsch3.h>
 #include <hwconfig.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c
index 2315bdb..b02d6e8 100644
--- a/board/freescale/ls2085aqds/ls2085aqds.c
+++ b/board/freescale/ls2085aqds/ls2085aqds.c
@@ -17,7 +17,7 @@
 #include <environment.h>
 #include <i2c.h>
 #include <rtc.h>
-#include <asm/arch-fsl-lsch3/soc.h>
+#include <asm/arch/soc.h>
 #include <hwconfig.h>
 
 #include "../common/qixis.h"
diff --git a/board/freescale/ls2085ardb/Kconfig b/board/freescale/ls2085ardb/Kconfig
index 85a3dcd..cb40db9 100644
--- a/board/freescale/ls2085ardb/Kconfig
+++ b/board/freescale/ls2085ardb/Kconfig
@@ -8,7 +8,7 @@ config SYS_VENDOR
 	default "freescale"
 
 config SYS_SOC
-	default "fsl-lsch3"
+	default "fsl-layerscape"
 
 config SYS_CONFIG_NAME
 	default "ls2085ardb"
diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2085ardb/eth_ls2085rdb.c
index 0a1163a..d578757 100644
--- a/board/freescale/ls2085ardb/eth_ls2085rdb.c
+++ b/board/freescale/ls2085ardb/eth_ls2085rdb.c
@@ -16,7 +16,6 @@
 #include <asm/io.h>
 #include <exports.h>
 #include <asm/arch/fsl_serdes.h>
-#include <asm/arch-fsl-lsch3/immap_lsch3.h>
 #include <fsl-mc/ldpaa_wriop.h>
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c
index 5e7997c..18953b8 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -17,7 +17,7 @@
 #include <fsl-mc/fsl_mc.h>
 #include <environment.h>
 #include <i2c.h>
-#include <asm/arch-fsl-lsch3/soc.h>
+#include <asm/arch/soc.h>
 
 #include "../common/qixis.h"
 #include "ls2085ardb_qixis.h"
diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c
index 56f561a..074b713 100644
--- a/board/freescale/p1023rdb/p1023rdb.c
+++ b/board/freescale/p1023rdb/p1023rdb.c
@@ -26,7 +26,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c
index 532eeac..95fe85b 100644
--- a/board/freescale/p2041rdb/eth.c
+++ b/board/freescale/p2041rdb/eth.c
@@ -19,7 +19,7 @@
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 
 #include "cpld.h"
 #include "../common/fman.h"
diff --git a/board/freescale/t102xqds/eth_t102xqds.c b/board/freescale/t102xqds/eth_t102xqds.c
index 441d6a3..99c23f7 100644
--- a/board/freescale/t102xqds/eth_t102xqds.c
+++ b/board/freescale/t102xqds/eth_t102xqds.c
@@ -21,7 +21,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 #include "../common/qixis.h"
 #include "../common/fman.h"
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index 856ec6e..02b283d 100644
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -21,7 +21,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 #include "../common/fman.h"
 
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 8c82934..8bf34fa 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -17,7 +17,7 @@
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <vsc9953.h>
 
 #include "../common/fman.h"
diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h
index 2fb4105..86de26c 100644
--- a/board/freescale/t104xrdb/cpld.h
+++ b/board/freescale/t104xrdb/cpld.h
@@ -44,3 +44,4 @@ void cpld_write(unsigned int reg, u8 value);
 		cpld_write(offsetof(struct cpld_data, reg), value)
 #define MISC_CTL_SG_SEL		0x80
 #define MISC_CTL_AURORA_SEL	0x02
+#define MISC_MUX_QE_TDM		0xc0
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index 71d0457..52cd112 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -11,7 +11,7 @@
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <vsc9953.h>
 
 #include "../common/fman.h"
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
index d982dfc..3227652 100644
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ b/board/freescale/t104xrdb/t104xrdb.c
@@ -6,12 +6,14 @@
 
 #include <common.h>
 #include <command.h>
+#include <hwconfig.h>
 #include <netdev.h>
 #include <linux/compiler.h>
 #include <asm/mmu.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
+#include <asm/fsl_fdt.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_portals.h>
@@ -110,6 +112,12 @@ int misc_init_r(void)
 					 MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
 
 #if defined(CONFIG_T1040D4RDB)
+	if (hwconfig("qe-tdm")) {
+		CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) |
+			   MISC_MUX_QE_TDM);
+		printf("QECSR : 0x%02x, mux to qe-tdm\n",
+		       CPLD_READ(sfp_ctl_status));
+	}
 	/* Mask all CPLD interrupt sources, except QSGMII interrupts */
 	if (CPLD_READ(sw_ver) < 0x03) {
 		debug("CPLD SW version 0x%02x doesn't support int_mask\n",
@@ -149,5 +157,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_fman_ethernet(blob);
 #endif
 
+	if (hwconfig("qe-tdm"))
+		fdt_del_diu(blob);
 	return 0;
 }
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index b82e9e7..1c0ce24 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -21,7 +21,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 #include <hwconfig.h>
 #include "../common/qixis.h"
diff --git a/board/freescale/t208xrdb/eth_t208xrdb.c b/board/freescale/t208xrdb/eth_t208xrdb.c
index cbbc625..ea51195 100644
--- a/board/freescale/t208xrdb/eth_t208xrdb.c
+++ b/board/freescale/t208xrdb/eth_t208xrdb.c
@@ -21,7 +21,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 
 int board_eth_init(bd_t *bis)
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index 9b416b1..2dfdcbb 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -21,7 +21,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 #include <hwconfig.h>
 #include "../common/qixis.h"
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
index 879bd1a..e563a61 100644
--- a/board/freescale/t4rdb/eth.c
+++ b/board/freescale/t4rdb/eth.c
@@ -23,7 +23,7 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
 #include <hwconfig.h>