diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2015-11-23 16:18:02 -0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2015-12-07 14:55:24 +0100 |
| commit | 29bc24ec4f9f159b3fdaf9c85cce89504a54782a (patch) | |
| tree | 8c9544b62d4fa31f34961c7b8e41825406b1866f /board/freescale | |
| parent | 6768146aeff0bd67a68ec6e0438667d505971449 (diff) | |
| download | u-boot-imx-29bc24ec4f9f159b3fdaf9c85cce89504a54782a.zip u-boot-imx-29bc24ec4f9f159b3fdaf9c85cce89504a54782a.tar.gz u-boot-imx-29bc24ec4f9f159b3fdaf9c85cce89504a54782a.tar.bz2 | |
mx6sxsabresd: Fix Ethernet PHY reset sequence
Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is
registered") Ethernet is no longer functional.
This commit does not have an issue in itself, but it revelead a problem
with the Ethernet initialization.
Fix this by calling enable_fec_anatop_clock() earlier and also
by adding a 10ms reset delay as recommended in the AR8031 datasheet.
Suggested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 3ee4662..56dc020 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -150,11 +150,15 @@ static int setup_fec(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int reg; + int reg, ret; /* Use 125MHz anatop loopback REF_CLK1 for ENET1 */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0); + ret = enable_fec_anatop_clock(0, ENET_125MHZ); + if (ret) + return ret; + imx_iomux_v3_setup_multiple_pads(phy_control_pads, ARRAY_SIZE(phy_control_pads)); @@ -163,14 +167,14 @@ static int setup_fec(void) /* Reset AR8031 PHY */ gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); - udelay(500); + mdelay(10); gpio_set_value(IMX_GPIO_NR(2, 7), 1); reg = readl(&anatop->pll_enet); reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; writel(reg, &anatop->pll_enet); - return enable_fec_anatop_clock(0, ENET_125MHZ); + return 0; } int board_eth_init(bd_t *bis) |