summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorMatthew McClintock <msm@freescale.com>2012-05-18 06:04:17 +0000
committerAndy Fleming <afleming@freescale.com>2012-08-08 17:13:37 -0500
commitaf2536088e2feae2cf1274f48376e3310e0f709e (patch)
tree50111b432dd0abc06c960b91991c38a1e6ce419c /board/freescale
parent56249fea3d5e32cddcd9160e51ec93a9c4327c6b (diff)
downloadu-boot-imx-af2536088e2feae2cf1274f48376e3310e0f709e.zip
u-boot-imx-af2536088e2feae2cf1274f48376e3310e0f709e.tar.gz
u-boot-imx-af2536088e2feae2cf1274f48376e3310e0f709e.tar.bz2
powerpc/p1022ds: add support for SPI and SD boot
Add TLB mappings, board target options, and configuration items need for SPI/SD boot. Since P1022DS RevB board, the NOR flash have been changed to 16 bit/28bit address flash, therefore, when SDHC/ESPI booting and access to eLBC, the PMUXCR[0~1] must be set to 10b, and PMUXCR[9~10] must be set to 00b for them. Configure the PX_BRDCFG0[0~1] to 10b which is connected to SPI devices as SPI_CS(0:3)_B. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/p1022ds/p1022ds.c4
-rw-r--r--board/freescale/p1022ds/tlb.c14
2 files changed, 18 insertions, 0 deletions
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 56dfcce..25fdc2a 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -39,6 +39,10 @@ int board_early_init_f(void)
/* Set pmuxcr to allow both i2c1 and i2c2 */
setbits_be32(&gur->pmuxcr, 0x1000);
+#ifdef CONFIG_SYS_RAMBOOT
+ setbits_be32(&gur->pmuxcr,
+ in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+#endif
/* Read back the register to synchronize the write. */
in_be32(&gur->pmuxcr);
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
index e620112..71e71f7 100644
--- a/board/freescale/p1022ds/tlb.c
+++ b/board/freescale/p1022ds/tlb.c
@@ -71,6 +71,20 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_SYS_RAMBOOT
+ /* *I*G - eSDHC/eSPI/NAND boot */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_1G, 1),
+
+ /* map the second 1G */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_1G, 1),
+#endif
+#
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);