Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2 files changed, 23 insertions, 64 deletions

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index d7d932e..3e314da 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -14,14 +14,13 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;
@@ -265,22 +264,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
-
-static int detect_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
-
 static void disable_lvds(struct display_info_t const *dev)
 {
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -309,7 +292,7 @@ static void enable_lvds(struct display_info_t const *dev)
 	writel(reg, &iomux->gpr[2]);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB666,
@@ -350,51 +333,7 @@ static struct display_info_t const displays[] = {{
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect && dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-			i = 0;
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-	} else {
-		printf("unsupported panel %s\n", panel);
-		return -EINVAL;
-	}
-
-	return 0;
-}
+size_t display_count = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index aadad32..d2b64cc 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -34,6 +34,9 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |             \
 	PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
 
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
 #define ETH_PHY_RESET	IMX_GPIO_NR(4, 21)
 
 int dram_init(void)
@@ -71,6 +74,20 @@ static iomux_v3_cfg_t const fec_pads[] = {
 	MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+#ifdef CONFIG_MXC_SPI
+static iomux_v3_cfg_t ecspi1_pads[] = {
+	MX6_PAD_ECSPI1_MISO__ECSPI_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_ECSPI1_SS0__GPIO4_IO11  | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_spi(void)
+{
+	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -132,6 +149,9 @@ static int setup_fec(void)
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
+#ifdef CONFIG_MXC_SPI
+	setup_spi();
+#endif
 	return 0;
 }