summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2011-02-09 02:00:08 +0000
committerKumar Gala <galak@kernel.crashing.org>2011-04-27 22:29:04 -0500
commite02aea61cb17fc1e39368e4911491305d805e886 (patch)
tree4bbff9a3f7309744dbcea8f2de9e4529127d34b7 /board/freescale
parentdf8af0b4a63b6375e7abbaffe1f93cc01c34529c (diff)
downloadu-boot-imx-e02aea61cb17fc1e39368e4911491305d805e886.zip
u-boot-imx-e02aea61cb17fc1e39368e4911491305d805e886.tar.gz
u-boot-imx-e02aea61cb17fc1e39368e4911491305d805e886.tar.bz2
powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code)
The P3041DS & P5020DS boards are almost identical (except for the processor in them). Additionally they are based on the P4080DS board design so we use the some board code for all 3 boards. Some ngPIXIS (FPGA) registers where reserved on P4080DS and now have meaning on P3041DS/P5020DS. We utilize some of these for SERDES clock configuration. Additionally, the P3041DS/P5020DS support NAND. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/common/Makefile2
-rw-r--r--board/freescale/common/ngpixis.h7
-rw-r--r--board/freescale/corenet_ds/Makefile2
-rw-r--r--board/freescale/corenet_ds/corenet_ds.c45
-rw-r--r--board/freescale/corenet_ds/law.c5
-rw-r--r--board/freescale/corenet_ds/p3041ds_ddr.c14
-rw-r--r--board/freescale/corenet_ds/p5020ds_ddr.c18
-rw-r--r--board/freescale/corenet_ds/tlb.c10
8 files changed, 93 insertions, 10 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 8ea5acb..dbf1da8 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -46,7 +46,9 @@ COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o
COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o
COBJS-$(CONFIG_P1022DS) += ics307_clk.o
COBJS-$(CONFIG_P2020DS) += ics307_clk.o
+COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
+COBJS-$(CONFIG_P5020DS) += ics307_clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
index 681b0d0..1d4483d 100644
--- a/board/freescale/common/ngpixis.h
+++ b/board/freescale/common/ngpixis.h
@@ -20,16 +20,17 @@ typedef struct ngpixis {
u8 scver;
u8 csr;
u8 rst;
- u8 res1;
+ u8 serclk;
u8 aux;
u8 spd;
u8 brdcfg0;
u8 brdcfg1; /* On some boards, this register is called 'dma' */
u8 addr;
- u8 res2[2];
+ u8 brdcfg2;
+ u8 gpiodir;
u8 data;
u8 led;
- u8 res3;
+ u8 tag;
u8 vctl;
u8 vstat;
u8 vcfgen0;
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 1047d78..69e81a4 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -28,7 +28,9 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
+COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o
COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o
+COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o
COBJS-$(CONFIG_PCI) += pci.o
COBJS-y += law.o
COBJS-y += tlb.o
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index 3db93c3..9324125 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -87,10 +87,21 @@ int checkboard (void)
* don't match.
*/
puts("SERDES Reference Clocks: ");
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ static const char *freq[] = {"100", "125", "156.25", "212.5" };
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+
+ printf("Bank%u=%sMhz ", i+1, freq[clock]);
+ }
+ puts("\n");
+#else
sw = in_8(&PIXIS_SW(3));
printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
+#endif
return 0;
}
@@ -146,7 +157,7 @@ static const char *serdes_clock_to_string(u32 clock)
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
- return "???";
+ return "150";
}
}
@@ -157,19 +168,41 @@ int misc_init_r(void)
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
- u8 sw3;
+ u8 sw;
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+ switch (clock) {
+ case 0:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ default:
+ printf("Warning: SDREFCLK%u switch setting of '11' is "
+ "unsupported\n", i + 1);
+ break;
+ }
+ }
+#else
/* Warn if the expected SERDES reference clocks don't match the
* actual reference clocks. This needs to be done after calling
* p4080_erratum_serdes8(), since that function may modify the clocks.
*/
- sw3 = in_8(&PIXIS_SW(3));
- actual[0] = (sw3 & 0x40) ?
+ sw = in_8(&PIXIS_SW(3));
+ actual[0] = (sw & 0x40) ?
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
- actual[1] = (sw3 & 0x20) ?
+ actual[1] = (sw & 0x20) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
- actual[2] = (sw3 & 0x10) ?
+ actual[2] = (sw & 0x10) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
+#endif
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c
index 43b4b97..d2ba556 100644
--- a/board/freescale/corenet_ds/law.c
+++ b/board/freescale/corenet_ds/law.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,6 +35,9 @@ struct law_entry law_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c
new file mode 100644
index 0000000..5a8ed94
--- /dev/null
+++ b/board/freescale/corenet_ds/p3041ds_ddr.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {0, 0, NULL}
+};
diff --git a/board/freescale/corenet_ds/p5020ds_ddr.c b/board/freescale/corenet_ds/p5020ds_ddr.c
new file mode 100644
index 0000000..e65de36
--- /dev/null
+++ b/board/freescale/corenet_ds/p5020ds_ddr.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {0, 0, NULL}
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_1[] = {
+ {0, 0, NULL}
+};
diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c
index fe77e79..38736b4 100644
--- a/board/freescale/corenet_ds/tlb.c
+++ b/board/freescale/corenet_ds/tlb.c
@@ -117,6 +117,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 13, BOOKE_PAGESZ_4M, 1),
#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ /*
+ * *I*G - NAND
+ * entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so we use entry 16 for nand.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 16, BOOKE_PAGESZ_1M, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);