summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorYe.Li <B37916@freescale.com>2015-07-09 17:07:32 +0800
committerYe.Li <B37916@freescale.com>2015-07-09 17:23:23 +0800
commit1f0cbe2b52b1ed7832a2f9c48950522f7b0fb6e8 (patch)
treefaf531754c1e6c721d8ed1d586cf6d938ff87122 /board/freescale
parentb8760a10e7f55d50572fbb07ecc2608074a0051d (diff)
downloadu-boot-imx-1f0cbe2b52b1ed7832a2f9c48950522f7b0fb6e8.zip
u-boot-imx-1f0cbe2b52b1ed7832a2f9c48950522f7b0fb6e8.tar.gz
u-boot-imx-1f0cbe2b52b1ed7832a2f9c48950522f7b0fb6e8.tar.bz2
MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull up
Set the ID pin pad to pull up not the pull down at default, otherwise we can't enter the device mode, but always detect as host. After this change we have to use portA cable to play as host, and use portB cable for device. Signed-off-by: Ye.Li <B37916@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx6qarm2/mx6qarm2.c6
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c6
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c7
-rw-r--r--board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c6
-rw-r--r--board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c8
-rw-r--r--board/freescale/mx6sxsabreauto/mx6sxsabreauto.c8
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c8
-rw-r--r--board/freescale/mx6ul_14x14_ddr3_arm2/mx6ul_14x14_ddr3_arm2.c6
-rw-r--r--board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c5
-rw-r--r--board/freescale/mx6ul_14x14_lpddr2_arm2/mx6ul_14x14_lpddr2_arm2.c8
10 files changed, 54 insertions, 14 deletions
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index 2f03f92..188096b 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -31,6 +31,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
int dram_init(void)
{
#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \
@@ -286,7 +290,7 @@ int board_eth_init(bd_t *bis)
static iomux_v3_cfg_t const usb_otg_pads[] = {
MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
static void setup_usb(void)
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index e20cd91..cedc090 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -84,6 +84,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#define I2C_PMIC 1
int dram_init(void)
@@ -889,7 +893,7 @@ int checkboard(void)
#define USB_OTG_PWR IOEXP_GPIO_NR(3, 1)
iomux_v3_cfg_t const usb_otg_pads[] = {
- MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
int board_ehci_hcd_init(int port)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index eedeb94..4bc754a 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -75,6 +75,11 @@ DECLARE_GLOBAL_DATA_PTR;
#define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+
#define I2C_PMIC 1
#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
@@ -908,7 +913,7 @@ int board_eth_init(bd_t *bis)
static iomux_v3_cfg_t const usb_otg_pads[] = {
MX6_PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
static iomux_v3_cfg_t const usb_hc1_pads[] = {
diff --git a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
index 3d23408..5e94f72 100644
--- a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
+++ b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
@@ -72,6 +72,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#define I2C_PMIC 0
#ifdef CONFIG_SYS_I2C_MXC
@@ -711,7 +715,7 @@ int board_early_init_f(void)
iomux_v3_cfg_t const usb_otg_pads[] = {
/*Only enable OTG1, the OTG2 has pin conflicts with PWM and WDOG*/
MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
static void setup_usb(void)
diff --git a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
index 88318ed..a0d5842 100644
--- a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
+++ b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -77,6 +77,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#define I2C_PMIC 0
#ifdef CONFIG_SYS_I2C_MXC
@@ -755,7 +759,7 @@ int board_early_init_f(void)
iomux_v3_cfg_t const usb_otg_pads[] = {
MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
index 6019dde..0e19345 100644
--- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
+++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -87,6 +87,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#define I2C_PMIC 1
#ifdef CONFIG_SYS_I2C_MXC
@@ -727,7 +731,7 @@ int board_early_init_f(void)
iomux_v3_cfg_t const usb_otg_pads[] = {
/* OTG1 */
MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
/* OTG2 */
MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
};
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 4e545b5..f653908 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
@@ -86,6 +86,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_SIZE;
@@ -567,7 +571,7 @@ static rdc_peri_cfg_t const shared_resources[] = {
static iomux_v3_cfg_t const usb_otg_pads[] = {
/* OGT1 */
MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
/* OTG2 */
MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
};
diff --git a/board/freescale/mx6ul_14x14_ddr3_arm2/mx6ul_14x14_ddr3_arm2.c b/board/freescale/mx6ul_14x14_ddr3_arm2/mx6ul_14x14_ddr3_arm2.c
index f5b8fc6..bb78c7b 100644
--- a/board/freescale/mx6ul_14x14_ddr3_arm2/mx6ul_14x14_ddr3_arm2.c
+++ b/board/freescale/mx6ul_14x14_ddr3_arm2/mx6ul_14x14_ddr3_arm2.c
@@ -75,6 +75,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#ifdef CONFIG_SYS_I2C_MXC
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC and EEPROM */
@@ -985,7 +989,7 @@ iomux_v3_cfg_t const usb_otg2_pads[] = {
/* conflict with i2c1_scl */
MX6_PAD_GPIO1_IO02__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
/* conflict with sd1_vselect */
- MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
int board_usb_phy_mode(int port)
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index aaca883..4ef338f 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -84,6 +84,9 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define IOX_SDI IMX_GPIO_NR(5, 10)
#define IOX_STCP IMX_GPIO_NR(5, 7)
@@ -776,7 +779,7 @@ int board_phy_config(struct phy_device *phydev)
#define UCTRL_PWR_POL (1 << 9)
static iomux_v3_cfg_t const usb_otg_pads[] = {
- MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
/* At default the 3v3 enables the MIC2026 for VBUS power */
diff --git a/board/freescale/mx6ul_14x14_lpddr2_arm2/mx6ul_14x14_lpddr2_arm2.c b/board/freescale/mx6ul_14x14_lpddr2_arm2/mx6ul_14x14_lpddr2_arm2.c
index e37e870..0245809 100644
--- a/board/freescale/mx6ul_14x14_lpddr2_arm2/mx6ul_14x14_lpddr2_arm2.c
+++ b/board/freescale/mx6ul_14x14_lpddr2_arm2/mx6ul_14x14_lpddr2_arm2.c
@@ -75,6 +75,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#ifdef CONFIG_SYS_I2C_MXC
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC and EEPROM */
@@ -946,7 +950,7 @@ int checkboard(void)
#define UCTRL_PWR_POL (1 << 9)
iomux_v3_cfg_t const usb_otg1_pads[] = {
MX6_PAD_GPIO1_IO04__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
/*
@@ -957,7 +961,7 @@ iomux_v3_cfg_t const usb_otg2_pads[] = {
/* conflict with i2c1_scl */
MX6_PAD_GPIO1_IO02__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
/* conflict with sd1_vselect */
- MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO05__ANATOP_OTG2_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
};
int board_usb_phy_mode(int port)