Merge branch 'master' of git://git.denx.de/u-boot-arm

19 files changed, 346 insertions, 110 deletions

diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile
index 626d48a..818484a 100644
--- a/board/freescale/c29xpcie/Makefile
+++ b/board/freescale/c29xpcie/Makefile
@@ -3,8 +3,23 @@
 #
 # SPDX-License-Identifier:	GPL-2.0+
 
+MINIMAL=
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+obj-y	+= spl_minimal.o tlb.o law.o
+else
+ifdef CONFIG_SPL_BUILD
+obj-y	+= spl.o
+endif
+
 obj-y	+= c29xpcie.o
 obj-y	+= cpld.o
 obj-y	+= ddr.o
 obj-y	+= law.o
 obj-y	+= tlb.o
+endif
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 430f0824..3bc396b 100644
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -62,9 +62,9 @@ Build and program u-boot to NOR flash
 
 2. Program u-boot.bin into NOR flash
 	=> tftp $loadaddr $uboot
-	=> protect off eff80000 +$filesize
-	=> erase eff80000 +$filesize
-	=> cp.b $loadaddr eff80000 $filesize
+	=> protect off eff40000 +$filesize
+	=> erase eff40000 +$filesize
+	=> cp.b $loadaddr eff40000 $filesize
 
 3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on.
 
@@ -73,9 +73,9 @@ Alternate NOR bank
 There are four banks in C29XPCIE board, example to change bank booting:
 1. Program u-boot.bin into alternate NOR bank
 	=> tftp $loadaddr $uboot
-	=> protect off e9f80000 +$filesize
-	=> erase e9f80000 +$filesize
-	=> cp.b $loadaddr e9f80000 $filesize
+	=> protect off e9f40000 +$filesize
+	=> erase e9f40000 +$filesize
+	=> cp.b $loadaddr e9f40000 $filesize
 
 2. Switch to alternate NOR bank
 	=> cpld_cmd reset altbank [bank]
diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c
index 5cbccff..37722da 100644
--- a/board/freescale/c29xpcie/cpld.c
+++ b/board/freescale/c29xpcie/cpld.c
@@ -89,6 +89,7 @@ static void cpld_dump_regs(void)
 }
 #endif
 
+#ifndef CONFIG_SPL_BUILD
 int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int rc = 0;
@@ -129,3 +130,4 @@ U_BOOT_CMD(
 	"cpld_cmd dump - display the CPLD registers\n"
 #endif
 	);
+#endif
diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c
new file mode 100644
index 0000000..3cfdb72
--- /dev/null
+++ b/board/freescale/c29xpcie/spl.c
@@ -0,0 +1,77 @@
+/* Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ulong get_effective_memsize(void)
+{
+	return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+	u32 plat_ratio;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	console_init_f();
+
+	/* initialize selected port with appropriate baud rate */
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	plat_ratio >>= 1;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+	bd_t *bd;
+
+	memset(gd, 0, sizeof(gd_t));
+	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+	memset(bd, 0, sizeof(bd_t));
+	gd->bd = bd;
+	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+	probecpu();
+	get_clocks();
+	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+			CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+	/* relocate environment function pointers etc. */
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (uchar *)CONFIG_ENV_ADDR);
+	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
+	gd->env_valid = 1;
+
+	i2c_init_all();
+
+	gd->ram_size = initdram(0);
+
+#ifdef CONFIG_SPL_NAND_BOOT
+	puts("TPL\n");
+#else
+	puts("SPL\n");
+#endif
+
+	nand_boot();
+}
diff --git a/board/freescale/c29xpcie/spl_minimal.c b/board/freescale/c29xpcie/spl_minimal.c
new file mode 100644
index 0000000..8f96b67
--- /dev/null
+++ b/board/freescale/c29xpcie/spl_minimal.c
@@ -0,0 +1,63 @@
+/* Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc85xx.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong bootflag)
+{
+	u32 plat_ratio;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
+
+	/* initialize selected port with appropriate baud rate */
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	plat_ratio >>= 1;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+	puts("\nNAND boot...\n");
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	puts("SPL\n");
+	nand_boot();
+}
+
+void putc(char c)
+{
+	if (c == '\n')
+		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+	while (*str)
+		putc(*str++);
+}
diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c
index 84844ee..c5abed0 100644
--- a/board/freescale/c29xpcie/tlb.c
+++ b/board/freescale/c29xpcie/tlb.c
@@ -30,6 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 0, BOOKE_PAGESZ_1M, 1),
 
+#ifndef CONFIG_SPL_BUILD
 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 			0, 1, BOOKE_PAGESZ_64M, 1),
@@ -43,13 +44,14 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 3, BOOKE_PAGESZ_256K, 1),
 #endif
+#endif
 
 	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
 			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 4, BOOKE_PAGESZ_64K, 1),
 
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 5, BOOKE_PAGESZ_64K, 1),
 
 	SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE,
@@ -61,7 +63,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
 			0, 7, BOOKE_PAGESZ_256K, 1),
 
-#ifdef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_SYS_RAMBOOT) || \
+		(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE,
 			CONFIG_SYS_DDR_SDRAM_BASE,
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
@@ -71,6 +74,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
 			0, 9, BOOKE_PAGESZ_256M, 1),
 #endif
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 12, BOOKE_PAGESZ_256K, 1)
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c
index f6e2b2b..022f38b 100644
--- a/board/freescale/common/sdhc_boot.c
+++ b/board/freescale/common/sdhc_boot.c
@@ -16,6 +16,8 @@
 #define ESDHC_BOOT_IMAGE_SIZE	0x48
 #define ESDHC_BOOT_IMAGE_ADDR	0x50
 
+#define ESDHC_DEFAULT_ENVADDR	0x400
+
 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
 {
 	u8 *tmp_buf;
@@ -39,6 +41,33 @@ int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
 	/* Get the code size from offset 0x48 */
 	code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
 
+#ifdef CONFIG_ESDHC_HC_BLK_ADDR
+	/*
+	 * On soc BSC9131, BSC9132:
+	 * In High Capacity SD Cards (> 2 GBytes), the 32-bit source address and
+	 * code length of these soc specify the memory address in block address
+	 * format. Block length is fixed to 512 bytes as per the SD High
+	 * Capacity specification.
+	 */
+	u64 tmp;
+
+	if (mmc->high_capacity) {
+		tmp = (u64)code_offset * blklen;
+		tmp += code_len * blklen;
+	} else
+		tmp = code_offset + code_len;
+
+	if ((tmp + CONFIG_ENV_SIZE > mmc->capacity) ||
+			(tmp > 0xFFFFFFFFU))
+		*env_addr = ESDHC_DEFAULT_ENVADDR;
+	else
+		*env_addr = tmp;
+
+	free(tmp_buf);
+
+	return 0;
+#endif
+
 	*env_addr = code_offset + code_len;
 
 	free(tmp_buf);
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 158a1b3..cde246d 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -104,9 +104,9 @@ Build and burn u-boot to NOR flash
 
 2. Burn u-boot.bin into NOR flash
 	=> tftp $loadaddr $uboot
-	=> protect off eff80000 +$filesize
-	=> erase eff80000 +$filesize
-	=> cp.b $loadaddr eff80000 $filesize
+	=> protect off eff40000 +$filesize
+	=> erase eff40000 +$filesize
+	=> cp.b $loadaddr eff40000 $filesize
 
 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
 
@@ -115,9 +115,9 @@ Alternate NOR bank
 ==================
 1. Burn u-boot.bin into alternate NOR bank
 	=> tftp $loadaddr $uboot
-	=> protect off eef80000 +$filesize
-	=> erase eef80000 +$filesize
-	=> cp.b $loadaddr eef80000 $filesize
+	=> protect off eef40000 +$filesize
+	=> erase eef40000 +$filesize
+	=> cp.b $loadaddr eef40000 $filesize
 
 2. Switch to alternate NOR bank
 	=> mw.b ffb00009 1
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index cf459b3..c5d1419 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -149,11 +149,11 @@ Steps to program images to flash for different boot mode
 1. NOR boot
    => tftp 1000000 u-boot.bin
    For bank0
-   => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize
+   => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
    set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
 
    For bank1
-   => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize
+   => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize
    set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
 
 2. NAND boot
diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README
index 685f5da..d382551 100644
--- a/board/freescale/p1023rds/README
+++ b/board/freescale/p1023rds/README
@@ -62,8 +62,8 @@ To program the image in the boot flash bank:
 NOR flash boot:
 	=> tftp 1000000 u-boot.bin
 	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
+	=> erase eff40000 efffffff
+	=> cp.b 1000000 eff40000 c0000
 
 NAND flash boot:
 	=> tftp 1000000 u-boot-nand.bin
diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README
index cb664a5..cd66e58 100644
--- a/board/freescale/p1_p2_rdb/README
+++ b/board/freescale/p1_p2_rdb/README
@@ -20,8 +20,8 @@ Memory Map
 0xef00_0000 - 0xef7f_ffff	Alternate bank		8MB
 0xe800_0000 - 0xefff_ffff	Boot bank		8MB
 
-0xef78_0000 - 0xef7f_ffff	Alternate u-boot address	512KB
-0xeff8_0000 - 0xefff_ffff	Boot u-boot address		512KB
+0xef74_0000 - 0xef7f_ffff	Alternate u-boot address	768KB
+0xeff4_0000 - 0xefff_ffff	Boot u-boot address		768KB
 
 Switch settings to boot from the NOR flash banks
 ------------------------------------------------
@@ -33,16 +33,16 @@ Flashing Images
 To place a new u-boot image in the alternate flash bank and then boot
 with that new image temporarily, use this:
 	tftp 1000000 u-boot.bin
-	erase ef780000 ef7fffff
-	cp.b 1000000 ef780000 80000
+	erase ef740000 ef7fffff
+	cp.b 1000000 ef740000 c0000
 
 Now to boot from the alternate bank change the SW4[8] from 0 to 1.
 
 To program the image in the boot flash bank:
 	tftp 1000000 u-boot.bin
 	protect off all
-	erase eff80000 ffffffff
-	cp.b 1000000 eff80000 80000
+	erase eff40000 ffffffff
+	cp.b 1000000 eff40000 c0000
 
 Using the Device Tree Source File
 ---------------------------------
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 292d0d3..9b5539f 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -18,8 +18,8 @@ Boot from NOR flash
 2. Program image
 	=> tftp 1000000 u-boot.bin
 	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
+	=> erase eff40000 efffffff
+	=> cp.b 1000000 eff40000 c0000
 
 3. Program RCW
 	=> tftp 1000000 rcw.bin
@@ -30,8 +30,8 @@ Boot from NOR flash
 4. Program FMAN Firmware ucode
 	=> tftp 1000000 ucode.bin
 	=> protect off all
-	=> erase ef000000 ef0fffff
-	=> cp.b 1000000 ef000000 2000
+	=> erase eff00000 eff3ffff
+	=> cp.b 1000000 eff00000 2000
 
 5. Change DIP-switch
 	SW1[1-5] = 10110
@@ -50,11 +50,11 @@ Boot from SDCard
 3. Program the PBL image to SDCard
 	=> tftp 1000000 pbl_sd.bin
 	=> mmcinfo
-	=> mmc write 1000000 8 441
+	=> mmc write 1000000 8 672
 
 4. Program FMAN Firmware ucode
 	=> tftp 1000000 ucode.bin
-	=> mmc write 1000000 46a 10
+	=> mmc write 1000000 690 10
 
 5. Change DIP-switch
 	SW1[1-5] = 01100
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index f8b53b4..6d380ae 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -118,16 +118,16 @@ Start Address  End Address      Description                     Size
 NOR Flash memory Map on T1040QDS
 --------------------------------
  Start          End             Definition                       Size
-0xEFF80000      0xEFFFFFFF      u-boot (current bank)            512KB
-0xEFF60000      0xEFF7FFFF      u-boot env (current bank)        128KB
-0xEFF40000      0xEFF5FFFF      FMAN Ucode (current bank)        128KB
+0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
+0xEFF20000      0xEFF3FFFF      u-boot env (current bank)        128KB
+0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
 0xED300000      0xEFF3FFFF      rootfs (alt bank)                44MB + 256KB
 0xEC800000      0xEC8FFFF       Hardware device tree (alt bank)  1MB
 0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
 0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF80000      0xEBFFFFFF      u-boot (alt bank)                512KB
-0xEBF60000      0xEBF7FFFF      u-boot env (alt bank)            128KB
-0xEBF40000      0xEBF5FFFF      FMAN ucode (alt bank)            128KB
+0xEBF40000      0xEBFFFFFF      u-boot (alt bank)                768KB
+0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)            128KB
+0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
 0xE9300000      0xEBF3FFFF      rootfs (current bank)            44MB + 256KB
 0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
 0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h
index 8ee206e..afa72af 100644
--- a/board/freescale/t1040qds/ddr.h
+++ b/board/freescale/t1040qds/ddr.h
@@ -31,16 +31,18 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{2,  833,  4, 4,     6, 0x06060607, 0x08080807,   0xff,    2,  0},
+	{2,  833,  0, 4,     6, 0x06060607, 0x08080807,   0xff,    2,  0},
+	{2,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09,   0xff,    2,  0},
+	{2,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09,   0xff,    2,  0},
+	{2,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A,   0xff,    2,  0},
+	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,   0xff,    2,  0},
+	{1,  833,  4, 4,     6, 0x06060607, 0x08080807,   0xff,    2,  0},
+	{1,  833,  0, 4,     6, 0x06060607, 0x08080807,   0xff,    2,  0},
+	{1,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09,   0xff,    2,  0},
+	{1,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09,   0xff,    2,  0},
+	{1,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A,   0xff,    2,  0},
+	{1,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,   0xff,    2,  0},
 	{}
 };
 
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 2cd8219..11e03bd 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -161,16 +161,16 @@ Start Address  End Address      Description                     Size
 NOR Flash memory Map
 ---------------------
  Start          End             Definition                       Size
-0xEFF80000      0xEFFFFFFF      u-boot (current bank)            512KB
-0xEFF60000      0xEFF7FFFF      u-boot env (current bank)        128KB
-0xEFF40000      0xEFF5FFFF      FMAN Ucode (current bank)        128KB
+0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
+0xEFF20000      0xEFF3FFFF      u-boot env (current bank)        128KB
+0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
 0xED300000      0xEFF3FFFF      rootfs (alt bank)                44MB + 256KB
 0xEC800000      0xEC8FFFF       Hardware device tree (alt bank)  1MB
 0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
 0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF80000      0xEBFFFFFF      u-boot (alt bank)                512KB
-0xEBF60000      0xEBF7FFFF      u-boot env (alt bank)            128KB
-0xEBF40000      0xEBF5FFFF      FMAN ucode (alt bank)            128KB
+0xEBF40000      0xEBFFFFFF      u-boot (alt bank)                768KB
+0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)            128KB
+0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
 0xE9300000      0xEBF3FFFF      rootfs (current bank)            44MB + 256KB
 0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
 0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t2080qds/ddr.c
index 5db5d21..ed1334d 100644
--- a/board/freescale/t2080qds/ddr.c
+++ b/board/freescale/t2080qds/ddr.c
@@ -24,7 +24,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
 	ulong ddr_freq;
 
-	if (ctrl_num > 2) {
+	if (ctrl_num > 1) {
 		printf("Not supported controller number %d\n", ctrl_num);
 		return;
 	}
@@ -40,8 +40,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	else
 		pbsp = udimms[0];
 
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
 	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
 	ddr_freq = get_ddr_freq(0) / 1000000;
@@ -49,14 +48,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		if (pbsp->n_ranks == pdimm->n_ranks &&
 		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
 			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
 				popts->clk_adjust = pbsp->clk_adjust;
 				popts->wrlvl_start = pbsp->wrlvl_start;
 				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
 				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-				popts->twot_en = pbsp->force_2t;
 				goto found;
 			}
 			pbsp_highest = pbsp;
@@ -69,13 +64,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		printf("for data rate %lu MT/s\n", ddr_freq);
 		printf("Trying to use the highest speed (%u) parameters\n",
 		       pbsp_highest->datarate_mhz_high);
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
 		popts->clk_adjust = pbsp_highest->clk_adjust;
 		popts->wrlvl_start = pbsp_highest->wrlvl_start;
 		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
 		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-		popts->twot_en = pbsp_highest->force_2t;
 	} else {
 		panic("DIMM is not supported by this board");
 	}
diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t2080qds/ddr.h
index 964eaad..9fc879a 100644
--- a/board/freescale/t2080qds/ddr.h
+++ b/board/freescale/t2080qds/ddr.h
@@ -14,9 +14,6 @@ struct board_specific_parameters {
 	u32 wrlvl_start;
 	u32 wrlvl_ctl_2;
 	u32 wrlvl_ctl_3;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
 };
 
 /*
@@ -28,58 +25,48 @@ struct board_specific_parameters {
 static const struct board_specific_parameters udimm0[] = {
 	/*
 	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{1,  1800, 2, 5,     6, 0x06070709, 0x110a0b08,   0xff,    2,  0},
-	{1,  1866, 2, 4,     6, 0x06060708, 0x09090a07,   0xff,    2,  0},
-	{1,  1900, 2, 4,     6, 0x06060708, 0x09090a07,   0xff,    2,  0},
-	{1,  2000, 2, 4,     8, 0x090a0b0d, 0x0e0f110b,   0xff,    2,  0},
-	{1,  2133, 2, 4,     8, 0x090a0b0d, 0x0e0f110b,   0xff,    2,  0},
+	{2,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{2,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{2,  1600, 2, 5,     8, 0x090b0b0d, 0x0d0e0f0b},
+	{2,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{2,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{2,  2140, 2, 4,     8, 0x090a0b0d, 0x0e0f110b},
+	{1,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{1,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{1,  1600, 2, 5,     8, 0x090b0b0d, 0x0d0e0f0b},
+	{1,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{1,  2140, 2, 4,     8, 0x090a0b0d, 0x0e0f110b},
 	{}
 };
 
 static const struct board_specific_parameters rdimm0[] = {
 	/*
 	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
-	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
-	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
-	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
-	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
-	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	/* TODO: need tuning these parameters if RDIMM is used */
+	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
+	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
 	{}
 };
 
-/*
- * The three slots have slightly different timing. The center values are good
- * for all slots. We use identical speed tables for them. In future use, if
- * DIMMs require separated tables, make more entries as needed.
- */
 static const struct board_specific_parameters *udimms[] = {
 	udimm0,
 };
 
-/*
- * The three slots have slightly different timing. See comments above.
- */
 static const struct board_specific_parameters *rdimms[] = {
 	rdimm0,
 };
-
-
 #endif
diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t2080qds/eth_t2080qds.c
index 3613f93..3e4ab8f 100644
--- a/board/freescale/t2080qds/eth_t2080qds.c
+++ b/board/freescale/t2080qds/eth_t2080qds.c
@@ -371,9 +371,11 @@ int board_eth_init(bd_t *bis)
 		break;
 	case 0x6c:
 	case 0x6d:
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
 		/* SGMII in Slot3 */
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
 	case 0x71:
 		/* SGMII in Slot3 */
@@ -418,7 +420,6 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
 		break;
 	default:
-		puts("Invalid SerDes1 protocol for T2080QDS\n");
 		break;
 	}
 
@@ -448,7 +449,12 @@ int board_eth_init(bd_t *bis)
 				fm_info_set_mdio(i, mii_dev_for_muxval(
 						 mdio_mux[i]));
 				break;
-			};
+			case 3:
+				mdio_mux[i] = EMI1_SLOT3;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						mdio_mux[i]));
+				break;
+			}
 			break;
 		case PHY_INTERFACE_MODE_RGMII:
 			if (i == FM1_DTSEC3)
diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t2080qds/t2080qds.c
index cac32fe..4fe8ccb 100644
--- a/board/freescale/t2080qds/t2080qds.c
+++ b/board/freescale/t2080qds/t2080qds.c
@@ -40,6 +40,11 @@ int checkboard(void)
 	printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
 	printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
 
+#ifdef CONFIG_SDCARD
+	puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+	puts("SPI\n");
+#else
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
 
@@ -51,6 +56,7 @@ int checkboard(void)
 		puts("NAND\n");
 	else
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
 
 	printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
 	       qixis_read_tag(buf), (int)qixis_read_minor());
@@ -97,13 +103,25 @@ int brd_mux_lane_to_slot(void)
 		/* SerDes1 is not enabled */
 		break;
 	case 0x1c:
-	case 0x95:
 	case 0xa2:
-	case 0x94:
 		/* SD1(A:D) => SLOT3 SGMII
 		 * SD1(G:H) => SLOT1 SGMII
 		 */
-		QIXIS_WRITE(brdcfg[12], 0x58);
+		QIXIS_WRITE(brdcfg[12], 0x1a);
+		break;
+	case 0x94:
+	case 0x95:
+		/* SD1(A:B) => SLOT3 SGMII@1.25bps
+		 * SD1(C:D) => SFP Module, SGMII@3.125bps
+		 * SD1(E:H) => SLOT1 SGMII@1.25bps
+		 */
+	case 0x96:
+		/* SD1(A:B) => SLOT3 SGMII@1.25bps
+		 * SD1(C)   => SFP Module, SGMII@3.125bps
+		 * SD1(D)   => SFP Module, SGMII@1.25bps
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x3a);
 		break;
 	case 0x51:
 		/* SD1(A:D) => SLOT3 XAUI
@@ -134,6 +152,34 @@ int brd_mux_lane_to_slot(void)
 		 */
 		QIXIS_WRITE(brdcfg[12], 0xda);
 		break;
+	case 0x6e:
+		/* SD1(A:B) => SFP Module, XFI
+		 * SD1(C:D) => SLOT3 SGMII
+		 * SD1(E:F) => SLOT1 PCIe4 x2
+		 * SD1(G:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xd9);
+		break;
+	case 0xda:
+		/* SD1(A:H) => SLOT3 PCIe3 x8
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x0);
+		 break;
+	case 0xc8:
+		/* SD1(A)   => SLOT3 PCIe3 x1
+		 * SD1(B)   => SFP Module, SGMII@1.25bps
+		 * SD1(C:D) => SFP Module, SGMII@3.125bps
+		 * SD1(E:F) => SLOT1 PCIe4 x2
+		 * SD1(G:H) => SLOT2 SGMII
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x79);
+		 break;
+	case 0xab:
+		/* SD1(A:D) => SLOT3 PCIe3 x4
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x1a);
+		 break;
 	default:
 		printf("WARNING: unsupported for SerDes1 Protocol %d\n",
 		       srds_prtcl_s1);
@@ -147,7 +193,7 @@ int brd_mux_lane_to_slot(void)
 	case 0x01:
 	case 0x02:
 		/* SD2(A:H) => SLOT4 PCIe1 */
-		QIXIS_WRITE(brdcfg[13], 0x20);
+		QIXIS_WRITE(brdcfg[13], 0x10);
 		break;
 	case 0x15:
 	case 0x16:
@@ -164,7 +210,7 @@ int brd_mux_lane_to_slot(void)
 		 * SD2(E:F) => SLOT5 Aurora
 		 * SD2(G:H) => SATA1,SATA2
 		 */
-		QIXIS_WRITE(brdcfg[13], 0x70);
+		QIXIS_WRITE(brdcfg[13], 0x78);
 		break;
 	case 0x1f:
 		/*
@@ -180,7 +226,15 @@ int brd_mux_lane_to_slot(void)
 		 * SD2(A:D) => SLOT4 SRIO2
 		 * SD2(E:H) => SLOT5 SRIO1
 		 */
-		QIXIS_WRITE(brdcfg[13], 0x50);
+		QIXIS_WRITE(brdcfg[13], 0xa0);
+		break;
+	case 0x36:
+		/*
+		 * SD2(A:D) => SLOT4 SRIO2
+		 * SD2(E:F) => Aurora
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0x78);
 		break;
 	default:
 		printf("WARNING: unsupported for SerDes2 Protocol %d\n",