summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-30 23:49:17 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-30 23:49:17 +0200
commit1c27059a2f7158a9c9a8778535b030935d75179d (patch)
treebf577d5c9f0da21c5d57feed1091214e54c39dec /board/freescale
parent8f0732ac3dc3bdbbcada313dc4b4b38d5d2c376a (diff)
parent4668a086bb0a769b741e3a4ffab85f1c41c7cdb8 (diff)
downloadu-boot-imx-1c27059a2f7158a9c9a8778535b030935d75179d.zip
u-boot-imx-1c27059a2f7158a9c9a8778535b030935d75179d.tar.gz
u-boot-imx-1c27059a2f7158a9c9a8778535b030935d75179d.tar.bz2
Merge remote-tracking branch 'u-boot/master'
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/common/Makefile2
-rw-r--r--board/freescale/common/fman.c31
-rw-r--r--board/freescale/common/fman.h2
-rw-r--r--board/freescale/common/p_corenet/law.c13
-rw-r--r--board/freescale/common/p_corenet/tlb.c18
-rw-r--r--board/freescale/corenet_ds/eth_p4080.c59
-rw-r--r--board/freescale/corenet_ds/pbi.cfg51
-rw-r--r--board/freescale/corenet_ds/rcw_p3041ds.cfg11
-rw-r--r--board/freescale/corenet_ds/rcw_p4080ds.cfg11
-rw-r--r--board/freescale/corenet_ds/rcw_p5020ds.cfg11
-rw-r--r--board/freescale/m5208evbe/m5208evbe.c28
-rw-r--r--board/freescale/m52277evb/m52277evb.c30
-rw-r--r--board/freescale/m5235evb/m5235evb.c43
-rw-r--r--board/freescale/m5253demo/m5253demo.c29
-rw-r--r--board/freescale/m5253evbe/m5253evbe.c30
-rw-r--r--board/freescale/m5272c3/m5272c3.c9
-rw-r--r--board/freescale/m5275evb/m5275evb.c50
-rw-r--r--board/freescale/m53017evb/m53017evb.c28
-rw-r--r--board/freescale/m5329evb/m5329evb.c28
-rw-r--r--board/freescale/m5329evb/nand.c14
-rw-r--r--board/freescale/m5373evb/m5373evb.c28
-rw-r--r--board/freescale/m5373evb/nand.c18
-rw-r--r--board/freescale/m54451evb/m54451evb.c32
-rw-r--r--board/freescale/m54455evb/m54455evb.c90
-rw-r--r--board/freescale/m547xevb/m547xevb.c34
-rw-r--r--board/freescale/m548xevb/m548xevb.c34
-rw-r--r--board/freescale/mpc8308rdb/mpc8308rdb.c58
-rw-r--r--board/freescale/mpc8540ads/mpc8540ads.c6
-rw-r--r--board/freescale/mpc8541cds/mpc8541cds.c6
-rw-r--r--board/freescale/mpc8555cds/mpc8555cds.c6
-rw-r--r--board/freescale/mpc8560ads/mpc8560ads.c6
-rw-r--r--board/freescale/p1010rdb/ddr.c7
-rw-r--r--board/freescale/p1_p2_rdb_pc/law.c2
-rw-r--r--board/freescale/p3060qds/Makefile54
-rw-r--r--board/freescale/p3060qds/README110
-rw-r--r--board/freescale/p3060qds/ddr.c248
-rw-r--r--board/freescale/p3060qds/eth.c482
-rw-r--r--board/freescale/p3060qds/fixed_ddr.c214
-rw-r--r--board/freescale/p3060qds/p3060qds.c342
-rw-r--r--board/freescale/p3060qds/p3060qds.h30
-rw-r--r--board/freescale/p3060qds/p3060qds_qixis.h74
41 files changed, 503 insertions, 1876 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 0b40dc7..54cb098 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -51,14 +51,12 @@ COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o
COBJS-$(CONFIG_P1022DS) += ics307_clk.o
COBJS-$(CONFIG_P2020DS) += ics307_clk.o
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
-COBJS-$(CONFIG_P3060QDS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
# deal with common files for P-series corenet based devices
SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o
-SUBLIB-$(CONFIG_P3060QDS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c
index 6ddf816..3ef4936 100644
--- a/board/freescale/common/fman.c
+++ b/board/freescale/common/fman.c
@@ -25,6 +25,9 @@
#include <libfdt_env.h>
#include <fdt_support.h>
+#include <fm_eth.h>
+#include <asm/fsl_serdes.h>
+
/*
* Given the following ...
*
@@ -67,3 +70,31 @@ int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
return fdt_setprop(fdt, offset, "phy-handle", &ph, sizeof(ph));
}
+
+/*
+ * Return the SerDes device enum for a given Fman port
+ *
+ * This function just maps the fm_port namespace to the srds_prtcl namespace.
+ */
+enum srds_prtcl serdes_device_from_fm_port(enum fm_port port)
+{
+ static const enum srds_prtcl srds_table[] = {
+ [FM1_DTSEC1] = SGMII_FM1_DTSEC1,
+ [FM1_DTSEC2] = SGMII_FM1_DTSEC2,
+ [FM1_DTSEC3] = SGMII_FM1_DTSEC3,
+ [FM1_DTSEC4] = SGMII_FM1_DTSEC4,
+ [FM1_DTSEC5] = SGMII_FM1_DTSEC5,
+ [FM1_10GEC1] = XAUI_FM1,
+ [FM2_DTSEC1] = SGMII_FM2_DTSEC1,
+ [FM2_DTSEC2] = SGMII_FM2_DTSEC2,
+ [FM2_DTSEC3] = SGMII_FM2_DTSEC3,
+ [FM2_DTSEC4] = SGMII_FM2_DTSEC4,
+ [FM2_DTSEC5] = SGMII_FM2_DTSEC5,
+ [FM2_10GEC1] = XAUI_FM2,
+ };
+
+ if ((port < FM1_DTSEC1) || (port > FM2_10GEC1))
+ return NONE;
+ else
+ return srds_table[port];
+}
diff --git a/board/freescale/common/fman.h b/board/freescale/common/fman.h
index d39ef08..734b1da 100644
--- a/board/freescale/common/fman.h
+++ b/board/freescale/common/fman.h
@@ -23,4 +23,6 @@
int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
const char *alias);
+enum srds_prtcl serdes_device_from_fm_port(enum fm_port port);
+
#endif
diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c
index c4566dd..09ef561 100644
--- a/board/freescale/common/p_corenet/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -48,19 +48,6 @@ struct law_entry law_table[] = {
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
#endif
-#ifdef CONFIG_SRIOBOOT_SLAVE
-#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0)
- SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
- LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
- SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
- LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
-#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1)
- SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
- LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
- SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
- LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
-#endif
-#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c
index da21627..e5cf208 100644
--- a/board/freescale/common/p_corenet/tlb.c
+++ b/board/freescale/common/p_corenet/tlb.c
@@ -66,13 +66,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
-#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
- * SRIOBOOT-SLAVE. When slave boot, the address of the
+ * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
* space is at 0xfff00000, it covered the 0xfffff000.
*/
- SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR,
- CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
#else
@@ -147,13 +147,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 16, BOOKE_PAGESZ_1M, 1),
#endif
-#ifdef CONFIG_SRIOBOOT_SLAVE
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/*
- * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode
- * and ENV from master
+ * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+ * fetching ucode and ENV from master
*/
- SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR,
- CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+ CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
0, 17, BOOKE_PAGESZ_1M, 1),
#endif
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
index b87b092..2c69c51 100644
--- a/board/freescale/corenet_ds/eth_p4080.c
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -68,6 +68,15 @@ static char *mdio_names[16] = {
NULL, NULL, NULL,
};
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot.
+ */
+static u8 lane_to_slot[] = {
+ 1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5
+};
+
static char *p4080ds_mdio_name_for_muxval(u32 muxval)
{
return mdio_names[(muxval & EMI_MASK) >> 28];
@@ -290,15 +299,6 @@ void fdt_fixup_board_enet(void *fdt)
}
}
-enum board_slots {
- SLOT1 = 1,
- SLOT2,
- SLOT3,
- SLOT4,
- SLOT5,
- SLOT6,
-};
-
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
@@ -307,27 +307,6 @@ int board_eth_init(bd_t *bis)
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
- u8 lane_to_slot[] = {
- SLOT1, /* 0 - Bank 1:A */
- SLOT1, /* 1 - Bank 1:B */
- SLOT2, /* 2 - Bank 1:C */
- SLOT2, /* 3 - Bank 1:D */
- SLOT3, /* 4 - Bank 1:E */
- SLOT3, /* 5 - Bank 1:F */
- SLOT3, /* 6 - Bank 1:G */
- SLOT3, /* 7 - Bank 1:H */
- SLOT6, /* 8 - Bank 1:I */
- SLOT6, /* 9 - Bank 1:J */
- SLOT4, /* 10 - Bank 2:A */
- SLOT4, /* 11 - Bank 2:B */
- SLOT4, /* 12 - Bank 2:C */
- SLOT4, /* 13 - Bank 2:D */
- SLOT5, /* 14 - Bank 3:A */
- SLOT5, /* 15 - Bank 3:B */
- SLOT5, /* 16 - Bank 3:C */
- SLOT5, /* 17 - Bank 3:D */
- };
-
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
mdio_mux[i] = EMI_NONE;
@@ -380,17 +359,17 @@ int board_eth_init(bd_t *bis)
break;
slot = lane_to_slot[lane];
switch (slot) {
- case SLOT3:
+ case 3:
mdio_mux[i] = EMI1_SLOT3;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT4:
+ case 4:
mdio_mux[i] = EMI1_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT5:
+ case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
@@ -417,12 +396,12 @@ int board_eth_init(bd_t *bis)
break;
slot = lane_to_slot[lane];
switch (slot) {
- case SLOT4:
+ case 4:
mdio_mux[i] = EMI2_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT5:
+ case 5:
mdio_mux[i] = EMI2_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
@@ -444,17 +423,17 @@ int board_eth_init(bd_t *bis)
break;
slot = lane_to_slot[lane];
switch (slot) {
- case SLOT3:
+ case 3:
mdio_mux[i] = EMI1_SLOT3;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT4:
+ case 4:
mdio_mux[i] = EMI1_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT5:
+ case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
@@ -481,12 +460,12 @@ int board_eth_init(bd_t *bis)
break;
slot = lane_to_slot[lane];
switch (slot) {
- case SLOT4:
+ case 4:
mdio_mux[i] = EMI2_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
- case SLOT5:
+ case 5:
mdio_mux[i] = EMI2_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg
new file mode 100644
index 0000000..50806ca
--- /dev/null
+++ b/board/freescale/corenet_ds/pbi.cfg
@@ -0,0 +1,51 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1 as 1MB SRAM
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/corenet_ds/rcw_p3041ds.cfg b/board/freescale/corenet_ds/rcw_p3041ds.cfg
new file mode 100644
index 0000000..8813156
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p3041ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P3041DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+12600000 00000000 241C0000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p4080ds.cfg b/board/freescale/corenet_ds/rcw_p4080ds.cfg
new file mode 100644
index 0000000..6a26339
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p4080ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P4080DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+105a0000 00000000 1e1e181e 0000cccc
+58400000 3c3c2000 58000000 e1000000
+00000000 00000000 00000000 008b6000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p5020ds.cfg b/board/freescale/corenet_ds/rcw_p5020ds.cfg
new file mode 100644
index 0000000..b09e409
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5020ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5020DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0C540000 00000000 1E120000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/m5208evbe/m5208evbe.c b/board/freescale/m5208evbe/m5208evbe.c
index 5f99e2f..355cfed 100644
--- a/board/freescale/m5208evbe/m5208evbe.c
+++ b/board/freescale/m5208evbe/m5208evbe.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <config.h>
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,7 +40,7 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,34 +51,35 @@ phys_size_t initdram(int board_type)
}
i--;
- sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
#ifdef CONFIG_SYS_SDRAM_BASE1
- sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cs1, CONFIG_SYS_SDRAM_BASE | i);
#endif
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
asm("nop");
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
asm("nop");
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
asm("nop");
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
asm("nop");
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
asm("nop");
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
asm("nop");
udelay(100);
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
index 9109edb..a9bec58 100644
--- a/board/freescale/m52277evb/m52277evb.c
+++ b/board/freescale/m52277evb/m52277evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -26,6 +26,7 @@
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -47,8 +48,8 @@ phys_size_t initdram(int board_type)
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
#else
- volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
- volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
+ gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -59,36 +60,37 @@ phys_size_t initdram(int board_type)
}
i--;
- gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
+ out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
- sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
- sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
__asm__("nop");
/* Issue LEMR */
- sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
__asm__("nop");
- sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD);
__asm__("nop");
udelay(1000);
/* Issue PALL */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
__asm__("nop");
/* Perform two refresh cycles */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
__asm__("nop");
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
__asm__("nop");
- sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00;
+ out_be32(&sdram->sdcr,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
#endif
diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c
index b9e6126..e9a568e 100644
--- a/board/freescale/m5235evb/m5235evb.c
+++ b/board/freescale/m5235evb/m5235evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <config.h>
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,8 +40,8 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
- volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
+ gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 dramsize, i, dramclk;
/*
@@ -48,14 +49,15 @@ phys_size_t initdram(int board_type)
* the port-size of SDRAM. In this case it is necessary to enable
* Data[15:0] on Port Address/Data.
*/
- gpio->par_ad =
- GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 |
- GPIO_PAR_AD_DATAL;
+ out_8(&gpio->par_ad,
+ GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 |
+ GPIO_PAR_AD_DATAL);
/* Initialize PAR to enable SDRAM signals */
- gpio->par_sdram =
- GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS |
- GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3);
+ out_8(&gpio->par_sdram,
+ GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS |
+ GPIO_PAR_SDRAM_SRAS | GPIO_PAR_SDRAM_SCKE |
+ GPIO_PAR_SDRAM_SDCS(3));
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
for (i = 0x13; i < 0x20; i++) {
@@ -64,25 +66,28 @@ phys_size_t initdram(int board_type)
}
i--;
- if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) {
+ if (!(in_be32(&sdram->dacr0) & SDRAMC_DARCn_RE)) {
dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ);
/* Initialize DRAM Control Register: DCR */
- sdram->dcr = SDRAMC_DCR_RTIM_9CLKS |
- SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4);
+ out_be16(&sdram->dcr, SDRAMC_DCR_RTIM_9CLKS |
+ SDRAMC_DCR_RTIM_6CLKS |
+ SDRAMC_DCR_RC((15 * dramclk) >> 4));
/* Initialize DACR0 */
- sdram->dacr0 =
- SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
- SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32;
+ out_be32(&sdram->dacr0,
+ SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) |
+ SDRAMC_DARCn_CASL_C1 | SDRAMC_DARCn_CBM_CMD20 |
+ SDRAMC_DARCn_PS_32);
asm("nop");
/* Initialize DMR0 */
- sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V;
+ out_be32(&sdram->dmr0,
+ ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V);
asm("nop");
/* Set IP (bit 3) in DACR */
- sdram->dacr0 |= SDRAMC_DARCn_IP;
+ setbits_be32(&sdram->dacr0, SDRAMC_DARCn_IP);
/* Wait 30ns to allow banks to precharge */
for (i = 0; i < 5; i++) {
@@ -93,7 +98,7 @@ phys_size_t initdram(int board_type)
*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xA5A59696;
/* Set RE (bit 15) in DACR */
- sdram->dacr0 |= SDRAMC_DARCn_RE;
+ setbits_be32(&sdram->dacr0, SDRAMC_DARCn_RE);
/* Wait for at least 8 auto refresh cycles to occur */
for (i = 0; i < 0x2000; i++) {
@@ -101,7 +106,7 @@ phys_size_t initdram(int board_type)
}
/* Finish the configuration by issuing the MRS. */
- sdram->dacr0 |= SDRAMC_DARCn_IMRS;
+ setbits_be32(&sdram->dacr0, SDRAMC_DARCn_IMRS);
asm("nop");
/* Write to the SDRAM Mode Register */
diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
index 8ffb2cc..052993d 100644
--- a/board/freescale/m5253demo/m5253demo.c
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* Hayden Fraser (Hayden.Fraser@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -109,7 +109,7 @@ int ide_preinit(void)
void ide_set_reset(int idereset)
{
- volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
+ atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
long period;
/* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
@@ -120,7 +120,8 @@ void ide_set_reset(int idereset)
};
if (idereset) {
- ata->cr = 0; /* control reset */
+ /* control reset */
+ out_8(&ata->cr, 0);
udelay(100);
} else {
mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
@@ -129,17 +130,19 @@ void ide_set_reset(int idereset)
period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */
/*ata->ton = CALC_TIMING (180); */
- ata->t1 = CALC_TIMING(piotms[2][0]);
- ata->t2w = CALC_TIMING(piotms[2][1]);
- ata->t2r = CALC_TIMING(piotms[2][1]);
- ata->ta = CALC_TIMING(piotms[2][8]);
- ata->trd = CALC_TIMING(piotms[2][7]);
- ata->t4 = CALC_TIMING(piotms[2][3]);
- ata->t9 = CALC_TIMING(piotms[2][6]);
-
- ata->cr = 0x40; /* IORDY enable */
+ out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
+ out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
+ out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
+ out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
+ out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
+
+ /* IORDY enable */
+ out_8(&ata->cr, 0x40);
udelay(2000);
- ata->cr |= 0x01; /* IORDY enable */
+ /* IORDY enable */
+ setbits_8(&ata->cr, 0x01);
}
}
#endif /* CONFIG_CMD_IDE */
diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c
index ae69f67..658748b 100644
--- a/board/freescale/m5253evbe/m5253evbe.c
+++ b/board/freescale/m5253evbe/m5253evbe.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* Hayden Fraser (Hayden.Fraser@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -26,6 +26,7 @@
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
int checkboard(void)
{
@@ -101,7 +102,7 @@ int ide_preinit(void)
void ide_set_reset(int idereset)
{
- volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
+ atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
long period;
/* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
@@ -112,7 +113,8 @@ void ide_set_reset(int idereset)
};
if (idereset) {
- ata->cr = 0; /* control reset */
+ /* control reset */
+ out_8(&ata->cr, 0);
udelay(100);
} else {
mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
@@ -121,17 +123,19 @@ void ide_set_reset(int idereset)
period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */
/*ata->ton = CALC_TIMING (180); */
- ata->t1 = CALC_TIMING(piotms[2][0]);
- ata->t2w = CALC_TIMING(piotms[2][1]);
- ata->t2r = CALC_TIMING(piotms[2][1]);
- ata->ta = CALC_TIMING(piotms[2][8]);
- ata->trd = CALC_TIMING(piotms[2][7]);
- ata->t4 = CALC_TIMING(piotms[2][3]);
- ata->t9 = CALC_TIMING(piotms[2][6]);
-
- ata->cr = 0x40; /* IORDY enable */
+ out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
+ out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
+ out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
+ out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
+ out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
+
+ /* IORDY enable */
+ out_8(&ata->cr, 0x40);
udelay(2000);
- ata->cr |= 0x01; /* IORDY enable */
+ /* IORDY enable */
+ setbits_8(&ata->cr, 0x01);
}
}
#endif /* CONFIG_CMD_IDE */
diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c
index 902ca3a..c3160ce 100644
--- a/board/freescale/m5272c3/m5272c3.c
+++ b/board/freescale/m5272c3/m5272c3.c
@@ -2,6 +2,8 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -23,6 +25,7 @@
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
int checkboard (void) {
@@ -32,10 +35,10 @@ int checkboard (void) {
};
phys_size_t initdram (int board_type) {
- volatile sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM);
+ sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM);
- sdp->sdram_sdtr = 0xf539;
- sdp->sdram_sdcr = 0x4211;
+ out_be16(&sdp->sdram_sdtr, 0xf539);
+ out_be16(&sdp->sdram_sdcr, 0x4211);
/* Dummy write to start SDRAM */
*((volatile unsigned long *)0) = 0;
diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c
index 35c9b20..1bbe5a3 100644
--- a/board/freescale/m5275evb/m5275evb.c
+++ b/board/freescale/m5275evb/m5275evb.c
@@ -4,6 +4,8 @@
*
* Copyright (C) 2005-2008 Arthur Shipkowski (art@videon-central.com)
*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -25,6 +27,7 @@
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
#define PERIOD 13 /* system bus period in ns */
#define SDRAM_TREFI 7800 /* in ns */
@@ -38,67 +41,68 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM);
- volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
+ sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM);
+ gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
- gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */
+ /* Enable SDRAM */
+ out_be16(&gpio_reg->par_sdram, 0x3FF);
/* Set up chip select */
- sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE;
- sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V;
+ out_be32(&sdp->sdbar0, CONFIG_SYS_SDRAM_BASE);
+ out_be32(&sdp->sdbmr0, MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V);
/* Set up timing */
- sdp->sdcfg1 = 0x83711630;
- sdp->sdcfg2 = 0x46770000;
+ out_be32(&sdp->sdcfg1, 0x83711630);
+ out_be32(&sdp->sdcfg2, 0x46770000);
/* Enable clock */
- sdp->sdcr = MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE;
+ out_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE);
/* Set precharge */
- sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
+ setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
/* Dummy write to start SDRAM */
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
/* Send LEMR */
- sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR
- | MCF_SDRAMC_SDMR_AD(0x0)
- | MCF_SDRAMC_SDMR_CMD;
+ setbits_be32(&sdp->sdmr,
+ MCF_SDRAMC_SDMR_BNKAD_LEMR | MCF_SDRAMC_SDMR_AD(0x0) |
+ MCF_SDRAMC_SDMR_CMD);
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
/* Send LMR */
- sdp->sdmr = 0x058d0000;
+ out_be32(&sdp->sdmr, 0x058d0000);
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
/* Stop sending commands */
- sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
+ clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD);
/* Set precharge */
- sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
+ setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
/* Stop manual precharge, send 2 IREF */
- sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL);
- sdp->sdcr |= MCF_SDRAMC_SDCR_IREF;
+ clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL);
+ setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IREF);
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
- /* Write mode register, clear reset DLL */
- sdp->sdmr = 0x018d0000;
+
+ out_be32(&sdp->sdmr, 0x018d0000);
*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
/* Stop sending commands */
- sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
- sdp->sdcr &= ~(MCF_SDRAMC_SDCR_MODE_EN);
+ clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD);
+ clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN);
/* Turn on auto refresh, lock SDMR */
- sdp->sdcr =
+ out_be32(&sdp->sdcr,
MCF_SDRAMC_SDCR_CKE
| MCF_SDRAMC_SDCR_REF
| MCF_SDRAMC_SDCR_MUX(1)
/* 1 added to round up */
| MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1)
- | MCF_SDRAMC_SDCR_DQS_OE(0x3);
+ | MCF_SDRAMC_SDCR_DQS_OE(0x3));
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
};
diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c
index f331786..142485f 100644
--- a/board/freescale/m53017evb/m53017evb.c
+++ b/board/freescale/m53017evb/m53017evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <config.h>
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,7 +40,7 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,34 +51,35 @@ phys_size_t initdram(int board_type)
}
i--;
- sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
#ifdef CONFIG_SYS_SDRAM_BASE1
- sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cs1, CONFIG_SYS_SDRAM_BASE | i);
#endif
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
asm("nop");
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
asm("nop");
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
asm("nop");
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
asm("nop");
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
asm("nop");
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
asm("nop");
udelay(100);
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
index b4df22f..1c14b83 100644
--- a/board/freescale/m5329evb/m5329evb.c
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <config.h>
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,7 +40,7 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,29 +51,30 @@ phys_size_t initdram(int board_type)
}
i--;
- sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
- sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 16025f9..c70c98c 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -67,18 +67,18 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
int board_nand_init(struct nand_chip *nand)
{
- volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/*
* set up pin configuration - enabled 2nd output buffer's signals
* (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
* to use nCE signal
*/
- gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
- gpio->pddr_timer |= 0x08;
- gpio->ppd_timer |= 0x08;
- gpio->pclrr_timer = 0;
- gpio->podr_timer = 0;
+ clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3);
+ setbits_8(&gpio->pddr_timer, 0x08);
+ setbits_8(&gpio->ppd_timer, 0x08);
+ out_8(&gpio->pclrr_timer, 0);
+ out_8(&gpio->podr_timer, 0);
nand->chip_delay = 60;
nand->ecc.mode = NAND_ECC_SOFT;
diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c
index 376de4b..8eb3512 100644
--- a/board/freescale/m5373evb/m5373evb.c
+++ b/board/freescale/m5373evb/m5373evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <config.h>
#include <common.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,7 +40,7 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,29 +51,30 @@ phys_size_t initdram(int board_type)
}
i--;
- sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
- sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index df8c03b..ed79e39 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -68,21 +68,21 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
int board_nand_init(struct nand_chip *nand)
{
- volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
- fbcs->csmr2 &= ~FBCS_CSMR_WP;
+ clrbits_be32(&fbcs->csmr2, FBCS_CSMR_WP);
/*
* set up pin configuration - enabled 2nd output buffer's signals
* (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
* to use nCE signal
*/
- gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
- gpio->pddr_timer |= 0x08;
- gpio->ppd_timer |= 0x08;
- gpio->pclrr_timer = 0;
- gpio->podr_timer = 0;
+ clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3);
+ setbits_8(&gpio->pddr_timer, 0x08);
+ setbits_8(&gpio->ppd_timer, 0x08);
+ out_8(&gpio->pclrr_timer, 0);
+ out_8(&gpio->podr_timer, 0);
nand->chip_delay = 60;
nand->ecc.mode = NAND_ECC_SOFT;
diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c
index 088c8c4..32a9374 100644
--- a/board/freescale/m54451evb/m54451evb.c
+++ b/board/freescale/m54451evb/m54451evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <common.h>
#include <spi.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -51,14 +52,14 @@ phys_size_t initdram(int board_type)
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
#else
- volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
- volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
+ gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
- if ((sdram->sdcfg1 == CONFIG_SYS_SDRAM_CFG1) &&
- (sdram->sdcfg2 == CONFIG_SYS_SDRAM_CFG2))
+ if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) &&
+ (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2))
return dramsize;
for (i = 0x13; i < 0x20; i++) {
@@ -67,32 +68,33 @@ phys_size_t initdram(int board_type)
}
i--;
- gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
+ out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
- sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
- sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
udelay(200);
/* Issue PALL */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
__asm__("nop");
/* Perform two refresh cycles */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
__asm__("nop");
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
__asm__("nop");
/* Issue LEMR */
- sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
__asm__("nop");
- sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
__asm__("nop");
- sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000;
+ out_be32(&sdram->sdcr,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000);
udelay(100);
#endif
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 2a84514..0ca268e 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -47,8 +48,8 @@ phys_size_t initdram(int board_type)
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
#else
- volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
- volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
+ gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
@@ -59,33 +60,34 @@ phys_size_t initdram(int board_type)
}
i--;
- gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
+ out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
- sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
- sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i);
+ out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&sdram->sdcs1, CONFIG_SYS_SDRAM_BASE1 | i);
- sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
- sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408;
- sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD | 0x408);
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x300);
udelay(500);
/* Issue PALL */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
- sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200;
+ out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x200);
- sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+ out_be32(&sdram->sdcr,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
#endif
@@ -105,26 +107,29 @@ int testdram(void)
int ide_preinit(void)
{
- volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
- gpio->par_feci2c |=
- (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
- GPIO_PAR_FECI2C_MDIO1_ATA_DIOW);
- gpio->par_ata |=
- (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
- GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0
- | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
- GPIO_PAR_ATA_IORDY_IORDY);
- gpio->par_pci |=
- (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ u32 tmp;
+
+ tmp = (in_8(&gpio->par_fec) & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
+ setbits_8(&gpio->par_fec, tmp);
+ tmp = ((in_be16(&gpio->par_feci2c) & 0xf0ff) |
+ (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW));
+ setbits_be16(&gpio->par_feci2c, tmp);
+
+ setbits_be16(&gpio->par_ata,
+ GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
+ GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 |
+ GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
+ GPIO_PAR_ATA_IORDY_IORDY);
+ setbits_be16(&gpio->par_pci,
+ GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
return (0);
}
void ide_set_reset(int idereset)
{
- volatile atac_t *ata = (atac_t *) MMAP_ATA;
+ atac_t *ata = (atac_t *) MMAP_ATA;
long period;
/* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
int piotms[5][9] = {
@@ -136,24 +141,27 @@ void ide_set_reset(int idereset)
}; /* PIO 4 */
if (idereset) {
- ata->cr = 0; /* control reset */
+ /* control reset */
+ out_8(&ata->cr, 0);
udelay(10000);
} else {
#define CALC_TIMING(t) (t + period - 1) / period
period = 1000000000 / gd->bus_clk; /* period in ns */
/*ata->ton = CALC_TIMING (180); */
- ata->t1 = CALC_TIMING(piotms[2][0]);
- ata->t2w = CALC_TIMING(piotms[2][1]);
- ata->t2r = CALC_TIMING(piotms[2][1]);
- ata->ta = CALC_TIMING(piotms[2][8]);
- ata->trd = CALC_TIMING(piotms[2][7]);
- ata->t4 = CALC_TIMING(piotms[2][3]);
- ata->t9 = CALC_TIMING(piotms[2][6]);
-
- ata->cr = 0x40; /* IORDY enable */
+ out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
+ out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
+ out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
+ out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
+ out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
+ out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
+
+ /* IORDY enable */
+ out_8(&ata->cr, 0x40);
udelay(200000);
- ata->cr |= 0x01; /* IORDY enable */
+ /* IORDY enable */
+ setbits_8(&ata->cr, 0x01);
}
}
#endif
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
index 9f1ec38..fd9bddd 100644
--- a/board/freescale/m547xevb/m547xevb.c
+++ b/board/freescale/m547xevb/m547xevb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -28,6 +28,7 @@
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -40,14 +41,14 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile siu_t *siu = (siu_t *) (MMAP_SIU);
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ siu_t *siu = (siu_t *) (MMAP_SIU);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
#ifdef CONFIG_SYS_DRAMSZ1
u32 temp;
#endif
- siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
+ out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
for (i = 0x13; i < 0x20; i++) {
@@ -55,7 +56,7 @@ phys_size_t initdram(int board_type)
break;
}
i--;
- siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
#ifdef CONFIG_SYS_DRAMSZ1
temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
@@ -65,31 +66,32 @@ phys_size_t initdram(int board_type)
}
i--;
dramsize += temp;
- siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
+ out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
#endif
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
- sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
udelay(100);
diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c
index fbc0888..fb216d8 100644
--- a/board/freescale/m548xevb/m548xevb.c
+++ b/board/freescale/m548xevb/m548xevb.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -28,6 +28,7 @@
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -40,14 +41,14 @@ int checkboard(void)
phys_size_t initdram(int board_type)
{
- volatile siu_t *siu = (siu_t *) (MMAP_SIU);
- volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ siu_t *siu = (siu_t *) (MMAP_SIU);
+ sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
#ifdef CONFIG_SYS_DRAMSZ1
u32 temp;
#endif
- siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
+ out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
for (i = 0x13; i < 0x20; i++) {
@@ -55,7 +56,7 @@ phys_size_t initdram(int board_type)
break;
}
i--;
- siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
+ out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
#ifdef CONFIG_SYS_DRAMSZ1
temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
@@ -65,31 +66,32 @@ phys_size_t initdram(int board_type)
}
i--;
dramsize += temp;
- siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
+ out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
#endif
- sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
- sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+ out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+ out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
- sdram->mode = CONFIG_SYS_SDRAM_EMOD;
- sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
- sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+ out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- sdram->mode = CONFIG_SYS_SDRAM_MODE;
+ out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
- sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+ out_be32(&sdram->ctrl,
+ (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
udelay(100);
diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c
index 5c54357..7e3fa1a 100644
--- a/board/freescale/mpc8308rdb/mpc8308rdb.c
+++ b/board/freescale/mpc8308rdb/mpc8308rdb.c
@@ -24,18 +24,56 @@
#include <common.h>
#include <hwconfig.h>
#include <i2c.h>
+#include <spi.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <pci.h>
#include <mpc83xx.h>
#include <vsc7385.h>
#include <netdev.h>
+#include <fsl_esdhc.h>
#include <asm/io.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_mpc83xx_serdes.h>
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * The following are used to control the SPI chip selects for the SPI command.
+ */
+#ifdef CONFIG_MPC8XXX_SPI
+
+#define SPI_CS_MASK 0x00400000
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ /* active low */
+ clrbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ /* inactive high */
+ setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
+}
+#endif /* CONFIG_MPC8XXX_SPI */
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bd)
+{
+ return fsl_esdhc_mmc_init(bd);
+}
+#endif
+
static u8 read_board_info(void)
{
u8 val8;
@@ -109,6 +147,25 @@ void pci_init_board(void)
*/
int misc_init_r(void)
{
+#ifdef CONFIG_MPC8XXX_SPI
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+
+ /*
+ * Set proper bits in SICRH to allow SPI on header J8
+ *
+ * NOTE: this breaks the TSEC2 interface, attached to the Vitesse
+ * switch. The pinmux configuration does not have a fine enough
+ * granularity to support both simultaneously.
+ */
+ clrsetbits_be32(&sysconf->sicrh, SICRH_GPIO_A_TSEC2, SICRH_GPIO_A_GPIO);
+ puts("WARNING: SPI enabled, TSEC2 support is broken\n");
+
+ /* Set header J8 SPI chip select output, disabled */
+ setbits_be32(&immr->gpio[0].dir, SPI_CS_MASK);
+ setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
+#endif
+
#ifdef CONFIG_VSC7385_IMAGE
if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
CONFIG_VSC7385_IMAGE_SIZE)) {
@@ -124,6 +181,7 @@ void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
+ fdt_fixup_esdhc(blob, bd);
}
#endif
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index c75585e..a275d3a 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -87,10 +87,10 @@ local_bus_init(void)
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
if (lbc_hz < 66) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
} else if (lbc_hz >= 133) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
} else {
/*
@@ -105,7 +105,7 @@ local_bus_init(void)
lbc->lcrr = 0x10000004;
}
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
udelay(200);
/*
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 532d32a..13ca84b 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -269,13 +269,13 @@ local_bus_init(void)
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
if (lbc_hz < 66) {
- lbc->lcrr |= 0x80000000; /* DLL Bypass */
+ lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */
} else if (lbc_hz >= 133) {
- lbc->lcrr &= (~0x80000000); /* DLL Enabled */
+ lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */
} else {
- lbc->lcrr &= (~0x80000000); /* DLL Enabled */
+ lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */
udelay(200);
/*
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 3361614..4cfd61c 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -267,13 +267,13 @@ local_bus_init(void)
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
if (lbc_hz < 66) {
- lbc->lcrr |= 0x80000000; /* DLL Bypass */
+ lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */
} else if (lbc_hz >= 133) {
- lbc->lcrr &= (~0x80000000); /* DLL Enabled */
+ lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */
} else {
- lbc->lcrr &= (~0x80000000); /* DLL Enabled */
+ lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */
udelay(200);
/*
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 1a165bf..285edbc 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -292,10 +292,10 @@ local_bus_init(void)
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
if (lbc_hz < 66) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
} else if (lbc_hz >= 133) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
} else {
/*
@@ -310,7 +310,7 @@ local_bus_init(void)
lbc->lcrr = 0x10000004;
}
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
+ lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP);/* DLL Enabled */
udelay(200);
/*
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index 10c5a42..6d00caf 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -147,10 +147,11 @@ phys_size_t fixed_sdram(void)
cpu = gd->cpu;
/* P1014 and it's derivatives support max 16bit DDR width */
if (cpu->soc_ver == SVR_P1014) {
+ ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
- ddr_cfg_regs.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS >> 1;
- ddr_cfg_regs.ddr_sdram_cfg &= ~0x00180000;
- ddr_cfg_regs.ddr_sdram_cfg |= 0x001080000;
+ /* divide SA and EA by two and then mask the rest so we don't
+ * write to reserved fields */
+ ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff;
}
ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 7968919..0da8300 100644
--- a/board/freescale/p1_p2_rdb_pc/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -25,13 +25,11 @@
#include <asm/mmu.h>
struct law_entry law_table[] = {
-#ifndef CONFIG_NAND_SPL
SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
#ifdef CONFIG_VSC7385_ENET
SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
#endif
-#endif
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
diff --git a/board/freescale/p3060qds/Makefile b/board/freescale/p3060qds/Makefile
deleted file mode 100644
index ae136f4..0000000
--- a/board/freescale/p3060qds/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += ddr.o
-COBJS-y += eth.o
-COBJS-y += fixed_ddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(OBJS) $(SOBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/freescale/p3060qds/README b/board/freescale/p3060qds/README
deleted file mode 100644
index ec62798..0000000
--- a/board/freescale/p3060qds/README
+++ /dev/null
@@ -1,110 +0,0 @@
-Overview
-=========
-The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
-
-The P3060 Processor combines six e500mc Power Architecture processor
-cores(1.2GHz) with high-performance datapath acceleration
-architecture(DPAA), CoreNet fabric infrastructure, as well as network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and military/aerospace applications.
-
-
-P3060QDS Board Specifications:
-==============================
-Memory subsystem:
- * 2G Bytes UDIMM DDR3(64bit bus) with ECC on
- * 128M Bytes NOR flash single-chip memory
- * 16M Bytes SPI flash
- * 8K Bytes AT24C64 I2C EEPROM for RCW
-
-Ethernet(Default SERDES 0x19):
- * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45)
- * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45)
- * FM1-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port1 in slot1)
- * FM1-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port3 in slot1)
- * FM2-dTSEC1: connected to SGMII PHY (Vitesse VSC8234 port0 in slot2)
- * FM2-dTSEC2: connected to SGMII PHY (Vitesse VSC8234 port2 in slot2)
- * FM2-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port0 in slot1)
- * FM2-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port2 in slot1)
-
-PCIe:
- * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4
- * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3
-
-RapidIO:
- * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3)
- * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4)
-
-USB:
- * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface
- * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface
-
-I2C:
- * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD,
- AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68)
- * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon
- ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D)
- * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40)
- * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56)
- * I2C1_CH4: PCIe SLOT1
- * I2C1_CH5: PCIe SLOT2
- * I2C1_CH6: PCIe SLOT3
- * I2C1_CH7: PCIe SLOT4
- * I2C2: NULL
- * I2C3: NULL
-
-UART:
- * Supports two UARTs up to 115200 bps for console
-
-
-Boot from NOR flash
-===================
-1. Build image
- export ARCH=powerpc
- export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu-
- make P3060QDS_config
- make
-
-2. Program image
- => tftp 1000000 u-boot.bin
- => protect off all
- => erase eff80000 efffffff
- => cp.b 1000000 eff80000 80000
-
-3. Program RCW
- => tftp 1000000 rcw.bin
- => protect off all
- => erase e8000000 e801ffff
- => cp.b 1000000 e8000000 50
-
-4. Program FMAN Firmware ucode
- => tftp 1000000 ucode.bin
- => protect off all
- => erase ef000000 ef0fffff
- => cp.b 1000000 ef000000 2000
-
-5. Change DIP-switch
- RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash)
- Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Using the Device Tree Source File
-=================================
-To create the DTB (Device Tree Binary) image file, use a command
-similar to this:
- dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb
-
-Or use the following command:
- {linux-2.6}/make p3060qds.dtb ARCH=powerpc
-
-then the dtb file will be generated under the following directory:
- {linux-2.6}/arch/powerpc/boot/p3060qds.dtb
-
-
-Booting Linux
-=============
-Place a linux uImage in the TFTP disk area.
- tftp 1000000 uImage
- tftp 2000000 rootfs.ext2.gz.uboot
- tftp 3000000 p3060rdb.dtb
- bootm 1000000 2000000 3000000
diff --git a/board/freescale/p3060qds/ddr.c b/board/freescale/p3060qds/ddr.c
deleted file mode 100644
index 9affbf0..0000000
--- a/board/freescale/p3060qds/ddr.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-
-#include "p3060qds.h"
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
- int i;
- char buf[32];
- fsl_ddr_cfg_regs_t ddr_cfg_regs;
- phys_size_t ddr_size;
- unsigned int lawbar1_target_id;
- ulong ddr_freq, ddr_freq_mhz;
-
- ddr_freq = get_ddr_freq(0);
- ddr_freq_mhz = ddr_freq / 1000000;
-
- printf("Configuring DDR for %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
- if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
- (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
- memcpy(&ddr_cfg_regs,
- fixed_ddr_parm_0[i].ddr_settings,
- sizeof(ddr_cfg_regs));
- break;
- }
- }
-
- if (fixed_ddr_parm_0[i].max_freq == 0)
- panic("Unsupported DDR data rate %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
- ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
- fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
-
- /*
- * setup laws for DDR. If not interleaving, presuming half memory on
- * DDR1 and the other half on DDR2
- */
- if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) {
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
- ddr_size,
- LAW_TRGT_IF_DDR_INTRLV) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- }
- } else {
- lawbar1_target_id = LAW_TRGT_IF_DDR_1;
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
- ddr_size,
- lawbar1_target_id) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- }
- }
- return ddr_size;
-}
-
-struct board_specific_params {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 clk_adjust;
- u32 wrlvl_start;
- u32 cpo;
- u32 write_data_delay;
- u32 force_2T;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_params udimm[] = {
- /*
- * memory controller 0
- * num| hi| clk| wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | |delay |
- */
- {4, 850, 4, 6, 0xff, 2, 0},
- {4, 950, 5, 7, 0xff, 2, 0},
- {4, 1050, 5, 8, 0xff, 2, 0},
- {4, 1250, 5, 10, 0xff, 2, 0},
- {4, 1350, 5, 11, 0xff, 2, 0},
- {4, 1666, 5, 12, 0xff, 2, 0},
- {2, 850, 5, 6, 0xff, 2, 0},
- {2, 950, 5, 7, 0xff, 2, 0},
- {2, 1250, 4, 6, 0xff, 2, 0},
- {2, 1350, 5, 7, 0xff, 2, 0},
- {2, 1666, 5, 8, 0xff, 2, 0},
- {1, 850, 4, 5, 0xff, 2, 0},
- {1, 950, 4, 7, 0xff, 2, 0},
- {1, 1666, 4, 8, 0xff, 2, 0},
- {}
-};
-
-static const struct board_specific_params rdimm[] = {
- /*
- * memory controller 0
- * num| hi| clk| wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | |delay |
- */
- {4, 850, 4, 6, 0xff, 2, 0},
- {4, 950, 5, 7, 0xff, 2, 0},
- {4, 1050, 5, 8, 0xff, 2, 0},
- {4, 1250, 5, 10, 0xff, 2, 0},
- {4, 1350, 5, 11, 0xff, 2, 0},
- {4, 1666, 5, 12, 0xff, 2, 0},
- {2, 850, 4, 6, 0xff, 2, 0},
- {2, 1050, 4, 7, 0xff, 2, 0},
- {2, 1666, 4, 8, 0xff, 2, 0},
- {1, 850, 4, 5, 0xff, 2, 0},
- {1, 950, 4, 7, 0xff, 2, 0},
- {1, 1666, 4, 8, 0xff, 2, 0},
- {}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_params *pbsp, *pbsp_highest = NULL;
- ulong ddr_freq;
-
- if (ctrl_num) {
- printf("Wrong parameter for controller number %d", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- if (popts->registered_dimm_en)
- pbsp = rdimm;
- else
- pbsp = udimm;
-
- /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->cpo_override = pbsp->cpo;
- popts->write_data_delay =
- pbsp->write_data_delay;
- popts->clk_adjust = pbsp->clk_adjust;
- popts->wrlvl_start = pbsp->wrlvl_start;
- popts->twoT_en = pbsp->force_2T;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found "
- "for data rate %lu MT/s!\n"
- "Trying to use the highest speed (%u) parameters\n",
- ddr_freq, pbsp_highest->datarate_mhz_high);
- popts->cpo_override = pbsp_highest->cpo;
- popts->write_data_delay = pbsp_highest->write_data_delay;
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->wrlvl_start = pbsp_highest->wrlvl_start;
- popts->twoT_en = pbsp_highest->force_2T;
- } else {
- panic("DIMM is not supported by this board");
- }
-
-
-found:
-
- /*
- * The datasheet of HMT125U7BFR8C-H9 blocks CL=7 as reservered.
- * However SPD still claims CL=7 is supported. Extensive tests
- * confirmed this board cannot work stably with CL=7 with this
- * particular DIMM.
- */
- if (ddr_freq >= 800 && ddr_freq < 1066 && \
- !strncmp(pdimm[0].mpart, "HMT125U7BFR8C-H9", 16)) {
- popts->cas_latency_override = 1;
- popts->cas_latency_override_value = 8;
- debug("Override CL to 8\n");
- }
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * Rtt and Rtt_WR override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
- /* DHC_EN =1, ODT = 60 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-}
-
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size;
-
- puts("Initializing....");
-
- if (fsl_use_spd()) {
- puts("using SPD\n");
- dram_size = fsl_ddr_sdram();
- } else {
- puts("using fixed parameters\n");
- dram_size = fixed_sdram();
- }
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- debug(" DDR: ");
- return dram_size;
-}
diff --git a/board/freescale/p3060qds/eth.c b/board/freescale/p3060qds/eth.c
deleted file mode 100644
index 3f812db..0000000
--- a/board/freescale/p3060qds/eth.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-
-#include "../common/qixis.h"
-#include "../common/fman.h"
-
-#include "p3060qds_qixis.h"
-
-#define EMI_NONE 0xffffffff
-#define EMI1_RGMII1 0
-#define EMI1_SLOT1 1
-#define EMI1_SLOT2 2
-#define EMI1_SLOT3 3
-#define EMI1_RGMII2 4
-
-static int mdio_mux[NUM_FM_PORTS];
-
-static char *mdio_names[5] = {
- "P3060QDS_MDIO0",
- "P3060QDS_MDIO1",
- "P3060QDS_MDIO2",
- "P3060QDS_MDIO3",
- "P3060QDS_MDIO4",
-};
-
-/*
- * Mapping of all 18 SERDES lanes to board slots.
- * A value of '0' here means that the mapping must be determined
- * dynamically, Lane 8/9/16/17 map to Slot1 or Aurora debug
- */
-static u8 lane_to_slot[] = {
- 4, 4, 4, 4, 3, 3, 3, 3, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
-};
-
-static char *p3060qds_mdio_name_for_muxval(u32 muxval)
-{
- return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u32 muxval)
-{
- struct mii_dev *bus;
- char *name = p3060qds_mdio_name_for_muxval(muxval);
-
- if (!name) {
- printf("No bus for muxval %x\n", muxval);
- return NULL;
- }
-
- bus = miiphy_get_dev_by_name(name);
-
- if (!bus) {
- printf("No bus by name %s\n", name);
- return NULL;
- }
-
- return bus;
-}
-
-struct p3060qds_mdio {
- u32 muxval;
- struct mii_dev *realbus;
-};
-
-static void p3060qds_mux_mdio(u32 muxval)
-{
- u8 brdcfg4;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
- brdcfg4 |= (muxval << 4);
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int p3060qds_mdio_read(struct mii_dev *bus, int addr, int devad,
- int regnum)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- p3060qds_mux_mdio(priv->muxval);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int p3060qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- p3060qds_mux_mdio(priv->muxval);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int p3060qds_mdio_reset(struct mii_dev *bus)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static int p3060qds_mdio_init(char *realbusname, u32 muxval)
-{
- struct p3060qds_mdio *pmdio;
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate P3060QDS MDIO bus\n");
- return -1;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate P3060QDS private data\n");
- free(bus);
- return -1;
- }
-
- bus->read = p3060qds_mdio_read;
- bus->write = p3060qds_mdio_write;
- bus->reset = p3060qds_mdio_reset;
- sprintf(bus->name, p3060qds_mdio_name_for_muxval(muxval));
-
- pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
- if (!pmdio->realbus) {
- printf("No bus with name %s\n", realbusname);
- free(bus);
- free(pmdio);
- return -1;
- }
-
- pmdio->muxval = muxval;
- bus->priv = pmdio;
-
- return mdio_register(bus);
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
- enum fm_port port, int offset)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- if (mdio_mux[port] == EMI1_RGMII1)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii1");
-
- if (mdio_mux[port] == EMI1_RGMII2)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii2");
-
- if ((mdio_mux[port] == EMI1_SLOT1) && ((srds_prtcl == 0x3)
- || (srds_prtcl == 0x6))) {
- switch (port) {
- case FM2_DTSEC4:
- fdt_set_phy_handle(blob, prop, pa, "phy2_slot1");
- break;
- case FM1_DTSEC4:
- fdt_set_phy_handle(blob, prop, pa, "phy3_slot1");
- break;
- default:
- break;
- }
- }
-
- if (mdio_mux[port] == EMI1_SLOT3) {
- switch (port) {
- case FM2_DTSEC3:
- fdt_set_phy_handle(blob, prop, pa, "phy0_slot3");
- break;
- case FM1_DTSEC3:
- fdt_set_phy_handle(blob, prop, pa, "phy1_slot3");
- break;
- default:
- break;
- }
- }
-}
-
-void fdt_fixup_board_enet(void *fdt)
-{
- int i, lane, idx;
-
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- idx = i - FM1_DTSEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
- if (lane < 0)
- break;
-
- switch (mdio_mux[i]) {
- case EMI1_SLOT1:
- if (lane >= 14) {
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1");
- fdt_status_disabled_by_alias(fdt,
- "emi1_slot1_bk1");
- } else {
- fdt_status_disabled_by_alias(fdt,
- "emi1_slot1");
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1_bk1");
- }
- break;
- case EMI1_SLOT2:
- fdt_status_okay_by_alias(fdt, "emi1_slot2");
- break;
- case EMI1_SLOT3:
- fdt_status_okay_by_alias(fdt, "emi1_slot3");
- break;
- }
- break;
- case PHY_INTERFACE_MODE_RGMII:
- if (i == FM1_DTSEC1)
- fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
-
- if (i == FM1_DTSEC2)
- fdt_status_okay_by_alias(fdt, "emi1_rgmii2");
- break;
- default:
- break;
- }
- }
-#if (CONFIG_SYS_NUM_FMAN == 2)
- for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- idx = i - FM2_DTSEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
- if (lane >= 0) {
- switch (mdio_mux[i]) {
- case EMI1_SLOT1:
- if (lane >= 14)
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1");
- else
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1_bk1");
- break;
- case EMI1_SLOT2:
- fdt_status_okay_by_alias(fdt,
- "emi1_slot2");
- break;
- case EMI1_SLOT3:
- fdt_status_okay_by_alias(fdt,
- "emi1_slot3");
- break;
- }
- }
- break;
- default:
- break;
- }
- }
-#endif
-}
-
-static void initialize_lane_to_slot(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int sdprtl = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- switch (sdprtl) {
- case 0x03:
- case 0x06:
- lane_to_slot[8] = 1;
- lane_to_slot[9] = lane_to_slot[8];
- lane_to_slot[16] = 5;
- lane_to_slot[17] = lane_to_slot[16];
- break;
- case 0x16:
- case 0x19:
- case 0x1C:
- lane_to_slot[8] = 5;
- lane_to_slot[9] = lane_to_slot[8];
- lane_to_slot[16] = 1;
- lane_to_slot[17] = lane_to_slot[16];
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_FMAN_ENET
- struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
- int i;
- struct fsl_pq_mdio_info dtsec_mdio_info;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int srds_cfg = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- initialize_lane_to_slot();
-
- /*
- * Set TBIPA on FM1@DTSEC1. This is needed for configurations
- * where FM1@DTSEC1 isn't used directly, since it provides
- * MDIO for other ports.
- */
- out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
- /* Initialize the mdio_mux array so we can recognize empty elements */
- for (i = 0; i < NUM_FM_PORTS; i++)
- mdio_mux[i] = EMI_NONE;
-
- dtsec_mdio_info.regs =
- (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
- dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
- /* Register the 1G MDIO bus */
- fsl_pq_mdio_init(bis, &dtsec_mdio_info);
-
- /* Register the 5 muxing front-ends to the MDIO buses */
- if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
-
- if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-
- if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
- fm_info_set_phy_address(FM1_DTSEC1, 1); /* RGMII1 */
- else if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
- fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT2_PHY_ADDR);
-
- if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
- fm_info_set_phy_address(FM1_DTSEC2, 2); /* RGMII2 */
- else if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_SGMII)
- fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
-
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT3_PHY_ADDR);
-
- switch (srds_cfg) {
- case 0x03:
- case 0x06:
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT2_PHY_ADDR);
- break;
- case 0x16:
- case 0x19:
- case 0x1C:
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- int idx = i - FM1_DTSEC1, lane, slot;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot[lane];
- if (QIXIS_READ(present) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 1:
- mdio_mux[i] = EMI1_SLOT1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 2:
- mdio_mux[i] = EMI1_SLOT2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 3:
- mdio_mux[i] = EMI1_SLOT3;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- case PHY_INTERFACE_MODE_RGMII:
- if (i == FM1_DTSEC1) {
- mdio_mux[i] = EMI1_RGMII1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- } else if (i == FM1_DTSEC2) {
- mdio_mux[i] = EMI1_RGMII2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- }
- break;
- default:
- break;
- }
- }
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
- for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- int idx = i - FM2_DTSEC1, lane, slot;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot[lane];
- if (QIXIS_READ(present) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 1:
- mdio_mux[i] = EMI1_SLOT1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 2:
- mdio_mux[i] = EMI1_SLOT2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 3:
- mdio_mux[i] = EMI1_SLOT3;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- default:
- break;
- }
- }
-#endif /* CONFIG_SYS_NUM_FMAN */
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
- return pci_eth_init(bis);
-}
diff --git a/board/freescale/p3060qds/fixed_ddr.c b/board/freescale/p3060qds/fixed_ddr.c
deleted file mode 100644
index 125988d..0000000
--- a/board/freescale/p3060qds/fixed_ddr.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000
-#define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104
-#define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45
-#define CONFIG_SYS_DDR_TIMING_2_1200 0x0FB8A912
-#define CONFIG_SYS_DDR_MODE_1_1200 0x00441A40
-#define CONFIG_SYS_DDR_MODE_2_1200 0x00100000
-#define CONFIG_SYS_DDR_INTERVAL_1200 0x12480100
-#define CONFIG_SYS_DDR_CLK_CTRL_1200 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_1000 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_1000 0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_1000 0x727DF944
-#define CONFIG_SYS_DDR_TIMING_2_1000 0x0FB088CF
-#define CONFIG_SYS_DDR_MODE_1_1000 0x00441830
-#define CONFIG_SYS_DDR_MODE_2_1000 0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_1000 0x0F3C0100
-#define CONFIG_SYS_DDR_CLK_CTRL_1000 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_900 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_900 0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_900 0x616ba844
-#define CONFIG_SYS_DDR_TIMING_2_900 0x0fb088ce
-#define CONFIG_SYS_DDR_MODE_1_900 0x00441620
-#define CONFIG_SYS_DDR_MODE_2_900 0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_900 0x0db60100
-#define CONFIG_SYS_DDR_CLK_CTRL_900 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800 0xcc330104
-#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b4744
-#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cc
-#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
-#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
-#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000
-
-#define CONFIG_SYS_DDR_CS0_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS3_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS0_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR2_CS2_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS3_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS0_CONFIG 0xA0044202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000
-#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000
-#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80044202
-#define CONFIG_SYS_DDR2_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000
-#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
-#define CONFIG_SYS_DDR_TIMING_4 0x00000001
-#define CONFIG_SYS_DDR_TIMING_5 0x02401400
-#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
-#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F607
-#define CONFIG_SYS_DDR_SDRAM_CFG 0xE7044000
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x24401031
-#define CONFIG_SYS_DDR_RCW_1 0x00000000
-#define CONFIG_SYS_DDR_RCW_2 0x00000000
-#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
- {750, 850, &ddr_cfg_regs_800},
- {850, 950, &ddr_cfg_regs_900},
- {950, 1050, &ddr_cfg_regs_1000},
- {1050, 1250, &ddr_cfg_regs_1200},
- {0, 0, NULL}
-};
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
deleted file mode 100644
index 43e7f28..0000000
--- a/board/freescale/p3060qds/p3060qds.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include <configs/P3060QDS.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/qixis.h"
-#include "p3060qds.h"
-#include "p3060qds_qixis.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- u8 sw;
- struct cpu_type *cpu = gd->cpu;
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
- unsigned int i;
-
- printf("Board: %s", cpu->name);
- puts("QDS, ");
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
- QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
- sw = QIXIS_READ(brdcfg[0]);
- sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
- if (sw < 0x8)
- printf("vBank: %d\n", sw);
- else if (sw == 0x8)
- puts("Promjet\n");
- else if (sw == 0x9)
- puts("NAND\n");
- else
- printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-
- puts("Reset Configuration Word (RCW):");
- for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
- u32 rcw = in_be32(&gur->rcwsr[i]);
-
- if ((i % 4) == 0)
- printf("\n %08x:", i * 4);
- printf(" %08x", rcw);
- }
- puts("\n");
-
- puts("SERDES Reference Clocks: ");
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < 3; i++) {
- static const char * const freq[] = {"100", "125", "Reserved",
- "156.25"};
- unsigned int clock = (sw >> (2 * i)) & 3;
-
- printf("Bank%u=%sMhz ", i+1, freq[clock]);
- }
- puts("\n");
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- /* only single DDR controller on QDS board, disable DDR1_MCK4/5 */
- setbits_be32(&gur->ddrclkdr, 0x00030000);
-
- return 0;
-}
-
-void board_config_serdes_mux(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int cfg = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- switch (cfg) {
- case 0x03:
- case 0x06:
- /* set Lane I,J as SGMII */
- QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A |
- BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A);
- break;
- case 0x16:
- case 0x19:
- case 0x1c:
- /* set Lane I,J as Aurora Debug */
- QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B |
- BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B);
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-}
-
-void board_config_usb_mux(void)
-{
- u8 brdcfg4, brdcfg5, brdcfg7;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
- u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1;
- u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EC_MODE_MASK;
- if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
- (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
- brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
- ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
- (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
- brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
- (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
- brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
- ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
- (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
- brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII;
- } else {
- brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII;
- }
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-
- brdcfg5 = QIXIS_READ(brdcfg[5]);
- brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK);
- brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL);
- QIXIS_WRITE(brdcfg[5], brdcfg5);
-
- brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT |
- BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1;
- QIXIS_WRITE(brdcfg[7], brdcfg7);
-}
-
-int board_early_init_r(void)
-{
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash + PROMJET region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- /* invalidate existing TLB entry for flash + promjet */
- disable_tlb(flash_esel);
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
- board_config_serdes_mux();
- board_config_usb_mux();
-
- return 0;
-}
-
-static const char *serdes_clock_to_string(u32 clock)
-{
- switch (clock) {
- case SRDS_PLLCR0_RFCK_SEL_100:
- return "100";
- case SRDS_PLLCR0_RFCK_SEL_125:
- return "125";
- case SRDS_PLLCR0_RFCK_SEL_156_25:
- return "156.25";
- default:
- return "150";
- }
-}
-
-#define NUM_SRDS_BANKS 3
-
-int misc_init_r(void)
-{
- serdes_corenet_t *srds_regs;
- u32 actual[NUM_SRDS_BANKS];
- unsigned int i;
- u8 sw;
-
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < 3; i++) {
- unsigned int clock = (sw >> (2 * i)) & 3;
- switch (clock) {
- case 0:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
- break;
- case 1:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
- break;
- case 3:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
- break;
- default:
- printf("Warning: SDREFCLK%u switch setting of '10' is "
- "unsupported\n", i + 1);
- break;
- }
- }
-
- srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
- for (i = 0; i < NUM_SRDS_BANKS; i++) {
- u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0);
- u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
- if (expected != actual[i]) {
- printf("Warning: SERDES bank %u expects reference clock"
- " %sMHz, but actual is %sMHz\n", i + 1,
- serdes_clock_to_string(expected),
- serdes_clock_to_string(actual[i]));
- }
- }
-
- return 0;
-}
-
-/*
- * This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v,
- * 18 means CVDD is 1.8v.
- */
-static u8 IO_VSEL[] = {
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 33, 33
-};
-
-#define IO_VSEL_MASK 0x1f
-
-/*
- * different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD,
- * then set status of spi flash nodes to 'disabled' according to CVDD.
- * CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi
- * flash2, CVDD '18' will select spi flash3.
- */
-void fdt_fixup_board_spi(void *blob)
-{
- u8 sw5 = QIXIS_READ(dutcfg[3]);
-
- switch (IO_VSEL[sw5 & IO_VSEL_MASK]) {
- /* 3.3v */
- case 33:
- do_fixup_by_compat(blob, "atmel,at45db081d", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- /* 2.5v */
- case 25:
- do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,en25q32", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- /* 1.8v */
- case 18:
- do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,en25q32", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "atmel,at45db081d", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- }
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = getenv_bootm_low();
- size = getenv_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
- fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_PCI
- pci_of_setup(blob, bd);
-#endif
-
- fdt_fixup_liodn(blob);
- fdt_fixup_dr_usb(blob, bd);
- fdt_fixup_board_spi(blob);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- fdt_fixup_fman_ethernet(blob);
- fdt_fixup_board_enet(blob);
-#endif
-}
diff --git a/board/freescale/p3060qds/p3060qds.h b/board/freescale/p3060qds/p3060qds.h
deleted file mode 100644
index 3da6815..0000000
--- a/board/freescale/p3060qds/p3060qds.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_H__
-#define __P3060QDS_H__
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/u-boot.h>
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-extern fixed_ddr_parm_t fixed_ddr_parm_0[];
-
-#endif
diff --git a/board/freescale/p3060qds/p3060qds_qixis.h b/board/freescale/p3060qds/p3060qds_qixis.h
deleted file mode 100644
index 4d5d6a2..0000000
--- a/board/freescale/p3060qds/p3060qds_qixis.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_QIXIS_H__
-#define __P3060QDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for P3060QDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EC_MODE_MASK 0x0F
-#define BRDCFG4_EC2_MII_EC1_MII 0x00
-#define BRDCFG4_EC2_MII_EC1_USB 0x03
-#define BRDCFG4_EC2_USB_EC1_MII 0x0C
-#define BRDCFG4_EC2_USB_EC1_USB 0x0F
-#define BRDCFG4_EC2_USB_EC1_RGMII 0x0E
-#define BRDCFG4_EC2_RGMII_EC1_USB 0x0B
-#define BRDCFG4_EC2_RGMII_EC1_RGMII 0x0A
-#define BRDCFG4_EMISEL_MASK 0xF0
-
-#define BRDCFG5_ECLKS_MASK 0x80
-#define BRDCFG5_USB1ID_MASK 0x40
-#define BRDCFG5_USB2ID_MASK 0x20
-#define BRDCFG5_GC2MX_MASK 0x0C
-#define BRDCFG5_T15MX_MASK 0x03
-#define BRDCFG5_ECLKS_IEEE1588_CM 0x80
-#define BRDCFG5_USB1ID_CTRL 0x40
-#define BRDCFG5_USB2ID_CTRL 0x20
-
-#define BRDCFG6_SD1MX_A 0x01
-#define BRDCFG6_SD1MX_B 0x00
-#define BRDCFG6_SD2MX_A 0x02
-#define BRDCFG6_SD2MX_B 0x00
-#define BRDCFG6_SD3MX_A 0x04
-#define BRDCFG6_SD3MX_B 0x00
-#define BRDCFG6_SD4MX_A 0x08
-#define BRDCFG6_SD4MX_B 0x00
-
-#define BRDCFG7_JTAGMX_MASK 0xC0
-#define BRDCFG7_IQ1MX_MASK 0x20
-#define BRDCFG7_G1MX_MASK 0x10
-#define BRDCFG7_D1MX_MASK 0x0C
-#define BRDCFG7_I3MX_MASK 0x03
-#define BRDCFG7_JTAGMX_AURORA 0x00
-#define BRDCFG7_JTAGMX_FPGA 0x80
-#define BRDCFG7_JTAGMX_COP_JTAG 0xC0
-#define BRDCFG7_IQ1MX_IRQ_EVT 0x00
-#define BRDCFG7_IQ1MX_USB2 0x20
-#define BRDCFG7_G1MX_USB1 0x00
-#define BRDCFG7_G1MX_TSEC3 0x10
-#define BRDCFG7_D1MX_DMA 0x00
-#define BRDCFG7_D1MX_TSEC3USB 0x04
-#define BRDCFG7_D1MX_HDLC2 0x08
-#define BRDCFG7_I3MX_UART2_I2C34 0x00
-#define BRDCFG7_I3MX_GPIO_EVT 0x01
-#define BRDCFG7_I3MX_USB1 0x02
-#define BRDCFG7_I3MX_TSEC3 0x03
-
-#endif