diff options
| author | Zhang Jiejing <jiejing.zhang@freescale.com> | 2012-04-20 15:38:24 +0800 |
|---|---|---|
| committer | Zhang Jiejing <jiejing.zhang@freescale.com> | 2012-04-24 14:08:32 +0800 |
| commit | 6739ea7dfbd9f1cbc9c50973475fb1acc2467f11 (patch) | |
| tree | e631489015ea4adc453e0532995f2e8c550682c8 /board/freescale | |
| parent | 074efa5991c67fc70e4e6497b72da522b528005b (diff) | |
| download | u-boot-imx-6739ea7dfbd9f1cbc9c50973475fb1acc2467f11.zip u-boot-imx-6739ea7dfbd9f1cbc9c50973475fb1acc2467f11.tar.gz u-boot-imx-6739ea7dfbd9f1cbc9c50973475fb1acc2467f11.tar.bz2 | |
ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boards
add fastboot function back in MX6Q_SABERSD board.
the MX6DL_SABERSD have usb init related issue which will
keep RESET, but left as later developement.
Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mx6q_sabresd/mx6q_sabresd.c | 36 |
1 files changed, 24 insertions, 12 deletions
diff --git a/board/freescale/mx6q_sabresd/mx6q_sabresd.c b/board/freescale/mx6q_sabresd/mx6q_sabresd.c index c96bb8e..9d227c7 100644 --- a/board/freescale/mx6q_sabresd/mx6q_sabresd.c +++ b/board/freescale/mx6q_sabresd/mx6q_sabresd.c @@ -817,9 +817,8 @@ int check_recovery_cmd_file(void) int button_pressed = 0; ulong part_length; int filelen = 0; - char *env; u32 reg; - int i; + int i = 0; printf("Checking for recovery command file...\n"); switch (get_boot_device()) { @@ -1086,21 +1085,23 @@ int checkboard(void) return 0; } +#if defined CONFIG_MX6Q +#define MX6X_IOMUX(s) MX6Q_##s +#elif defined CONFIG_MX6DL +#define MX6X_IOMUX(s) MX6DL_##s +#endif + #ifdef CONFIG_IMX_UDC void udc_pins_setting(void) { #define GPIO_3_22_BIT_MASK (1<<22) +#define GPIO_1_29_BIT_MASK (1<<29) u32 reg; -#if defined CONFIG_MX6Q - mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_1__USBOTG_ID); - /* USB_OTG_PWR */ - mxc_iomux_v3_setup_pad(MX6Q_PAD_EIM_D22__GPIO_3_22); -#elif defined CONFIG_MX6DL - mxc_iomux_v3_setup_pad(MX6DL_PAD_ENET_RX_ER__ANATOP_USBOTG_ID); - /* USB_OTG_PWR */ - mxc_iomux_v3_setup_pad(MX6DL_PAD_EIM_D22__GPIO_3_22); -#endif + + mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_ENET_RX_ER__ANATOP_USBOTG_ID)); + mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_EIM_D22__GPIO_3_22)); + mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_ENET_TXD1__GPIO_1_29)); reg = readl(GPIO3_BASE_ADDR + GPIO_GDIR); /* set gpio_3_22 as output */ @@ -1112,6 +1113,17 @@ void udc_pins_setting(void) reg &= ~GPIO_3_22_BIT_MASK; writel(reg, GPIO3_BASE_ADDR + GPIO_DR); - mxc_iomux_set_gpr_register(1, 13, 1, 1); + reg = readl(GPIO1_BASE_ADDR + GPIO_GDIR); + /* set gpio_1_29 as output */ + reg |= GPIO_1_29_BIT_MASK; + writel(reg, GPIO1_BASE_ADDR + GPIO_GDIR); + + /* set USB_H1_POWER to 1 */ + reg = readl(GPIO1_BASE_ADDR + GPIO_DR); + reg |= GPIO_1_29_BIT_MASK; + writel(reg, GPIO1_BASE_ADDR + GPIO_DR); + + mxc_iomux_set_gpr_register(1, 13, 1, 0); + } #endif |