ENGR00127368 UBOOT: Make the android recovery code common for platformsrel_imx_2.6.31_10.09.00

Move the android recovery codes into common/recovery.c.
Cut the keypad detecting time. Now we only need detect
there's POWER and HOME key pressing at the time scanning
keyboard matrix. So user must hold these two keys when bootup to
enter recovery mode. This can reduce the uboot boot time with
recovery mode configured.

Later /cache file checking for recovery command should be merged
into the common/recovery.c

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>

5 files changed, 160 insertions, 268 deletions

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 02a824d..fac485d 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -41,6 +41,7 @@ COBJS-${CONFIG_MPC8541CDS}	+= cds_pci_ft.o
 COBJS-${CONFIG_MPC8548CDS}	+= cds_pci_ft.o
 COBJS-${CONFIG_MPC8555CDS}	+= cds_pci_ft.o
 
+COBJS-${CONFIG_ANDROID_RECOVERY} += recovery.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/recovery.c b/board/freescale/common/recovery.c
new file mode 100644
index 0000000..d133a9d
--- /dev/null
+++ b/board/freescale/common/recovery.c
@@ -0,0 +1,103 @@
+/*
+ * Freescale Android Recovery mode checking routing
+
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ */
+#include <common.h>
+#include <malloc.h>
+#include "recovery.h"
+
+#ifndef CONFIG_MXC_KPD
+#error "error! keypad must be configured to support recovery"
+#endif
+#include <mxc_keyb.h>
+
+#define PRESSED_HOME	0x01
+#define PRESSED_POWER	0x02
+#define RECOVERY_KEY_MASK (PRESSED_HOME | PRESSED_POWER)
+
+extern int check_recovery_cmd_file(void);
+extern enum boot_device get_boot_device(void);
+
+inline int test_key(int value, struct kpp_key_info *ki)
+{
+	return (ki->val == value) && (ki->evt == KDepress);
+}
+
+int check_key_pressing(void)
+{
+	struct kpp_key_info *key_info;
+	int state = 0, keys, i;
+
+	mxc_kpp_init();
+
+	puts("Detecting HOME+POWER key for recovery ...\n");
+
+	/* Check for home + power */
+	keys = mxc_kpp_getc(&key_info);
+	if (keys < 2)
+		return 0;
+
+	for (i = 0; i < keys; i++) {
+		if (test_key(CONFIG_POWER_KEY, &key_info[i]))
+			state |= PRESSED_HOME;
+		else if (test_key(CONFIG_HOME_KEY, &key_info[i]))
+			state |= PRESSED_POWER;
+	}
+
+	free(key_info);
+
+	if ((state & RECOVERY_KEY_MASK) == RECOVERY_KEY_MASK)
+		return 1;
+
+	return 0;
+}
+
+extern struct reco_envs supported_reco_envs[];
+
+void setup_recovery_env(void)
+{
+	char *env, *boot_args, *boot_cmd;
+	int bootdev = get_boot_device();
+
+	boot_cmd = supported_reco_envs[bootdev].cmd;
+	boot_args = supported_reco_envs[bootdev].args;
+
+	if (boot_cmd == NULL) {
+		printf("Unsupported bootup device for recovery\n");
+		return;
+	}
+
+	printf("setup env for recovery..\n");
+
+	env = getenv("bootargs_android_recovery");
+	/* Set env to recovery mode */
+	if (!env)
+		setenv("bootargs_android", boot_args);
+	else
+		setenv("bootargs_android", env);
+
+	env = getenv("bootcmd_android_recovery");
+	if (!env)
+		setenv("bootcmd_android", boot_cmd);
+	else
+		setenv("bootcmd_android", env);
+	setenv("bootcmd", "run bootcmd_android");
+
+}
+
+/* export to lib_arm/board.c */
+void check_recovery_mode(void)
+{
+	if (check_key_pressing())
+		setup_recovery_env();
+	else if (check_recovery_cmd_file()) {
+		puts("Recovery command file founded!\n");
+		setup_recovery_env();
+	}
+}
diff --git a/board/freescale/common/recovery.h b/board/freescale/common/recovery.h
new file mode 100644
index 0000000..9958330
--- /dev/null
+++ b/board/freescale/common/recovery.h
@@ -0,0 +1,19 @@
+/*
+ * Android Recovery supported header file
+ *
+ * Copyright (C) 2010 Freescale Semiconductor.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ */
+
+#ifndef __RECOVERY_H_
+#define __RECOVERY_H_
+
+struct reco_envs {
+	char *cmd;
+	char *args;
+};
+
+#endif
diff --git a/board/freescale/mx51_3stack/mx51_3stack.c b/board/freescale/mx51_3stack/mx51_3stack.c
index 1289118..77da23c 100644
--- a/board/freescale/mx51_3stack/mx51_3stack.c
+++ b/board/freescale/mx51_3stack/mx51_3stack.c
@@ -43,7 +43,8 @@
 #include <asm/arch/mmu.h>
 #endif
 
-#ifdef CONFIG_FSL_ANDROID
+#ifdef CONFIG_ANDROID_RECOVERY
+#include "../common/recovery.h"
 #include <mxc_keyb.h>
 #include <part.h>
 #include <ext2fs.h>
@@ -611,125 +612,21 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef BOARD_LATE_INIT
-
-#if defined(CONFIG_FSL_ANDROID) && defined(CONFIG_MXC_KPD)
-static int waiting_for_func_key_pressing(void)
-{
-	struct kpp_key_info key_info = {0, 0};
-	int switch_delay = CONFIG_ANDROID_BOOTMOD_DELAY;
-	int state = 0, boot_mode_switch = 0;
-
-	mxc_kpp_init();
-
-	puts("Press home + power to enter recovery mode ...\n");
-
-	while ((switch_delay > 0) && (!boot_mode_switch)) {
-		int i;
-
-		--switch_delay;
-		/* delay 100 * 10ms */
-		for (i = 0; !boot_mode_switch && i < 100; ++i) {
-			/* A state machine to scan home + power key */
-			/* Check for home + power */
-			if (mxc_kpp_getc(&key_info)) {
-				switch (state) {
-				case 0:
-					/* First press */
-					if (TEST_HOME_KEY_DEPRESS(key_info.val, key_info.evt)) {
-						/* Press Home */
-						state = 1;
-					} else if (TEST_POWER_KEY_DEPRESS(key_info.val, key_info.evt)) {
-						state = 2;
-					} else {
-						state = 0;
-					}
-					break;
-				case 1:
-					/* Home is already pressed, try to detect Power */
-					if (TEST_POWER_KEY_DEPRESS(key_info.val,
-						    key_info.evt)) {
-						boot_mode_switch = 1;
-					} else {
-					    if (TEST_HOME_KEY_DEPRESS(key_info.val,
-							key_info.evt))
-						state = 2;
-					    else
-						state = 0;
-					}
-					break;
-				case 2:
-					/* Power is already pressed, try to detect Home */
-					if (TEST_HOME_KEY_DEPRESS(key_info.val,
-						    key_info.evt)) {
-						boot_mode_switch = 1;
-					} else {
-						if (TEST_POWER_KEY_DEPRESS(key_info.val,
-							    key_info.evt))
-							state = 1;
-						else
-							state = 0;
-					}
-					break;
-				default:
-					break;
-				}
-
-				if (1 == boot_mode_switch)
-					return 1;
-			}
-		}
-		for (i = 0; i < 100; ++i)
-			udelay(10000);
-	}
-
-	return 0;
-}
-
-static int switch_to_recovery_mode(void)
-{
-	char *env = NULL;
-	char *boot_args = NULL;
-	char *boot_cmd = NULL;
-
-	printf("Boot mode switched to recovery mode!\n");
-
-	switch (get_boot_device()) {
-	case MMC_BOOT:
-		boot_args = CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC;
-		boot_cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC;
-		break;
-	case NAND_BOOT:
-		boot_args = CONFIG_ANDROID_RECOVERY_BOOTARGS_NAND;
-		boot_cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_NAND;
-		break;
-	case SPI_NOR_BOOT:
-		printf("Recovery mode not supported in SPI NOR boot\n");
-		return -1;
-		break;
-	case UNKNOWN_BOOT:
-	default:
-		printf("Unknown boot device!\n");
-		return -1;
-		break;
-	}
-
-	env = getenv("bootargs_android_recovery");
-	/* Set env to recovery mode */
-	if (!env)
-		setenv("bootargs_android", boot_args);
-	else
-		setenv("bootargs_android", env);
-
-	env = getenv("bootcmd_android_recovery");
-	if (!env)
-		setenv("bootcmd_android", boot_cmd);
-	else
-		setenv("bootcmd_android", env);
-	setenv("bootcmd", "run bootcmd_android");
-
-	return 0;
-}
+#ifdef CONFIG_ANDROID_RECOVERY
+struct reco_envs supported_reco_envs[END_BOOT] = {
+	{
+	 .cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_NAND,
+	 .args = CONFIG_ANDROID_RECOVERY_BOOTARGS_NAND,
+	 },
+	{
+	 .cmd = NULL,
+	 .args = NULL,
+	 },
+	{
+	 .cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC,
+	 .args = CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC,
+	 },
+};
 
 static int check_mmc_recovery_cmd_file(int dev_num, int part_num, char *path)
 {
@@ -905,19 +802,9 @@ static int check_recovery_cmd_file(void)
 }
 #endif
 
+#ifdef BOARD_LATE_INIT
 int board_late_init(void)
 {
-#if defined(CONFIG_FSL_ANDROID) && defined(CONFIG_MXC_KPD)
-	if (waiting_for_func_key_pressing())
-		switch_to_recovery_mode();
-	else {
-		if (check_recovery_cmd_file()) {
-			puts("Recovery command file detected!\n");
-			switch_to_recovery_mode();
-		}
-	}
-#endif
-
 	return 0;
 }
 #endif
diff --git a/board/freescale/mx51_bbg/mx51_bbg.c b/board/freescale/mx51_bbg/mx51_bbg.c
index 30fed3d..83e8ca7 100644
--- a/board/freescale/mx51_bbg/mx51_bbg.c
+++ b/board/freescale/mx51_bbg/mx51_bbg.c
@@ -52,8 +52,8 @@
 #include <asm/imx_iim.h>
 #endif
 
-#ifdef CONFIG_FSL_ANDROID
-#include <mxc_keyb.h>
+#ifdef CONFIG_ANDROID_RECOVERY
+#include "../common/recovery.h"
 #include <part.h>
 #include <ext2fs.h>
 #include <linux/mtd/mtd.h>
@@ -873,131 +873,23 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef BOARD_LATE_INIT
-#if defined(CONFIG_FSL_ANDROID) && defined(CONFIG_MXC_KPD)
-inline int waiting_for_func_key_pressing(void)
-{
-	struct kpp_key_info key_info = {0, 0};
-	int switch_delay = CONFIG_ANDROID_BOOTMOD_DELAY;
-	int state = 0, boot_mode_switch = 0;
-
-	mxc_kpp_init();
-
-	puts("Press home + power to enter recovery mode ...\n");
-
-	while ((switch_delay > 0) && (!boot_mode_switch)) {
-		int i;
-
-		--switch_delay;
-		/* delay 100 * 10ms */
-		for (i = 0; !boot_mode_switch && i < 100; ++i) {
-			/* A state machine to scan home + power key */
-			/* Check for home + power */
-			if (mxc_kpp_getc(&key_info)) {
-				switch (state) {
-				case 0:
-					/* First press */
-					if (TEST_HOME_KEY_DEPRESS(key_info.val, key_info.evt)) {
-						/* Press Home */
-						state = 1;
-					} else if (TEST_POWER_KEY_DEPRESS(key_info.val, key_info.evt)) {
-						/* Press Power */
-						state = 2;
-					} else {
-						state = 0;
-					}
-					break;
-				case 1:
-					/* Home is already pressed, try to detect Power */
-					if (TEST_POWER_KEY_DEPRESS(key_info.val,
-						    key_info.evt)) {
-						/* Switch */
-						boot_mode_switch = 1;
-					} else {
-					    if (TEST_HOME_KEY_DEPRESS(key_info.val,
-							key_info.evt)) {
-						/* Not switch */
-						state = 2;
-					    } else
-						state = 0;
-					}
-					break;
-				case 2:
-					/* Power is already pressed, try to detect Home */
-					if (TEST_HOME_KEY_DEPRESS(key_info.val,
-						    key_info.evt)) {
-						/* Switch */
-						boot_mode_switch = 1;
-					} else {
-						if (TEST_POWER_KEY_DEPRESS(key_info.val,
-							    key_info.evt)) {
-							/* Not switch */
-							state = 1;
-						} else
-							state = 0;
-					}
-					break;
-				default:
-					break;
-				}
-
-				if (1 == boot_mode_switch)
-					return 1;
-			}
-		}
-		for (i = 0; i < 100; ++i)
-			udelay(10000);
-	}
-
-	return 0;
-}
-
-inline int switch_to_recovery_mode(void)
-{
-	char *env = NULL;
-	char *boot_args = NULL;
-	char *boot_cmd = NULL;
-
-	printf("Boot mode switched to recovery mode!\n");
-
-	switch (get_boot_device()) {
-	case MMC_BOOT:
-		boot_args = CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC;
-		boot_cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC;
-		break;
-	case NAND_BOOT:
-		printf("Recovery mode not supported in NAND boot\n");
-		return -1;
-		break;
-	case SPI_NOR_BOOT:
-		printf("Recovery mode not supported in SPI NOR boot\n");
-		return -1;
-		break;
-	case UNKNOWN_BOOT:
-	default:
-		printf("Unknown boot device!\n");
-		return -1;
-		break;
-	}
-
-	env = getenv("bootargs_android_recovery");
-	/* Set env to recovery mode */
-	if (!env)
-		setenv("bootargs_android", boot_args);
-	else
-		setenv("bootargs_android", env);
-
-	env = getenv("bootcmd_android_recovery");
-	if (!env)
-		setenv("bootcmd_android", boot_cmd);
-	else
-		setenv("bootcmd_android", env);
-	setenv("bootcmd", "run bootcmd_android");
-
-	return 0;
-}
+#ifdef CONFIG_ANDROID_RECOVERY
+struct reco_envs supported_reco_envs[END_BOOT] = {
+	{
+	 .cmd = NULL,
+	 .args = NULL,
+	 },
+	{
+	 .cmd = NULL,
+	 .args = NULL,
+	 },
+	{
+	 .cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC,
+	 .args = CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC,
+	 },
+};
 
-inline int check_recovery_cmd_file(void)
+int check_recovery_cmd_file(void)
 {
 	disk_partition_t info;
 	ulong part_length;
@@ -1064,6 +956,7 @@ inline int check_recovery_cmd_file(void)
 }
 #endif
 
+#ifdef BOARD_LATE_INIT
 int board_late_init(void)
 {
 #ifdef CONFIG_I2C_MXC
@@ -1076,17 +969,6 @@ int board_late_init(void)
 		setup_core_voltage_spi();
 #endif
 
-#if defined(CONFIG_FSL_ANDROID) && defined(CONFIG_MXC_KPD)
-	if (waiting_for_func_key_pressing())
-		switch_to_recovery_mode();
-	else {
-		if (check_recovery_cmd_file()) {
-			puts("Recovery command file founded!\n");
-			switch_to_recovery_mode();
-		}
-	}
-#endif
-
 	return 0;
 }
 #endif